Get Plant data From ECC Via. Midedleware

HI,Experts :
I work in SRM7.0.ECS!
I get material data fron ECC Via. CRM Middleware .BUT the Plant data not in it .How can I get the plant data (just plant number) Via. CRM Middleware ? I need your suggestions warmly?
BR
Alex!

Hi Alex
check these two reports in srm 7.0
BBP_GET_LOCATIONS_ALL
BBP_LOCATIONS_GET_SELECTED
after replicating plant
generally in srm 5.0 we run any one of the report and bring the plant into srm and map the plant in extended attribute tab in locations
here we type BP number ( of plant - once you transfer a plant from ecc to srm , it creates a BP for each plant) and we map as said earlier.
check it up .
try one plant BBP_LOCATIONS_GET_SELECTED by this report . make ensure no ranges available for Business partner in bucf tcode
br
muthu

Similar Messages

Replication of Plant data from ECC to CRM

Hello Experts,
Kindly require your assistance in the following requirement:
I have replicated the quotes from ECC to CRM. However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
I have followed the Note 493947 but in vain.
Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
Kindly request your guidance on this.
Regards,
Venkat.

Hi Venkat,
'Delivery Plant' field doesn't exist in CRM data model. Please refer to note note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
field doesn't exist in CRM.
Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
Best regards
Christophe

BPC:NW - Best practices to load Transaction data from ECC to BW

I have a very basic question for loading GL transaction data into BPC for variety of purposes, would be great if you can point me towards best practices/standard ways of making such interfaces.
1. For Planning
When we are doing the planning for cost center expenses and need to make variance reports against the budgets, what would be the source Infocube/DSO for loading the data from ECC via BW, if the application is -
YTD entry mode:
Periodic entry mode:
What difference it makes to use 0FI_GL_12 data source or using 0FIGL_C10 cube or 0FLGL_O14 or 0FIGL_D40 DSOs.
Based on the data entry mode of planning application, what is the best way to make use of 0balance or debit_credit key figures on the BI side.
2. For consolidation:
Since we need to have trading partner, what are the best practices for loading the actual data from ECC.
What are the typical mappings to be maintained for movement type with flow dimensions.
I have seen multiple threads with different responses but I am looking for the best practices and what scenarios you are using to load such transactions from OLTP system. I will really appreciate if you can provide some functional insight in such scenarios.
Thanks in advance.
-SM

For - planning , please take a look at SAP Extended Financial Planning rapid-deployment solution: G/L Financial Planning module. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is free to licensed customers of SAP BPC. This RDS leverages the 0FIGL_C10 cube mentioned above.
https://service.sap.com/public/rds-epm-planning
For consolidation, please take a look at SAP Financial Close & Disclosure Management rapid-deployment solution. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is also free to licensed customers of SAP BPC.
https://service.sap.com/public/rds-epm-fcdm
Note: You will require an SAP ServiceMarketplace ID (S-ID) to download the underlying SAP RDS content and documentation.
The documentation of RDS will discuss the how/why of best practice integration. You can also contact me direct at [email protected] for consultation.
We are also in the process of rolling out the updated 2015 free training on these two RDS. Please register at this link and you will be sent an invite.
https://www.surveymonkey.com/s/878J92K
If the link is inactive at some point after this post, please contact [email protected]

How to transfer data from ECC to CRM via IDocs (Clfmas01),

Hi all,
how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.
Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
Edited by: khaja fareed on Jan 11, 2010 12:44 PM

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

When transferring HR data from ECC to CRM via change pointers

When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
paricularly the last name and first name of BUT000
Do you have any idea why this could be happening
Thanks in advance

Hi Kittu,
Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
use this links kittu.
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
Creating a change pointer and subsequently triggering an IDOC
thanks
karthik

How to get data from ECC --- Sales Order,Delivery,Transfer Order & Invoice

Hi,
Good day.
I'm ABAPer and I need to get Sales Order,Delivery,Transfer Order & Invoice data from ECC. The said data will be displayed in the custom form that I need to create. How exactly do i get the said data above?
Can I get them in the tables avaialable in GTS? Where?
Or do I get the data directly in ECC? How?
Thank you very much!
Best regards.
Brando

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

Transfer z-table data from ECC to CRM via Middleware

Hi,
I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
André

Hi,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
Regards,
Susanta

Goods Receipts data from ECC 6.0 to APO system

Hello Team
Good day to you. Now i have the below requirement.
1. From legacy system i am getting Goods Receipt data and i want to create GRs in ECC system. for this i found a relavent bapi (ie BAPI_GOODSMVT_CREATE). please correct me if i am wrong.
2. As soon as GRs gets create in ECC system, i want to push this data to APO system for udpates. -- > so for this requirement i want to know is there any user-exit/badi exists in which i can write a code to trigger the RFC function module which takes data from ECC system and updates into APO system or is there any other way to perform this task. please suggest me on this.
my Interface landscape is as below.
Legacy system -
> ECC system -
> APO sytem
i want to push GR data from legacy system to APO sytem as mentioned in the above two steps. so requesting you to please suggest the solution accordingly.
Thanks in advance.
REgards
RAj

Hi Mario
Thank you very much for your detail explanation. But i think i have put a wrong question to you, i am so sorry for this. i am very new to this process. so i am putting my requirement and the options suggested below. so i request you to please check and suggest me accordingly. In Option 3 what is the BADI i need to use and what is the process to follow to complete my option 3 which is suggested. your suggestions will help me a lot.
Thanks in advance very much.
My requirement is below with the options suggested are given below.
Design Decision and Options
Description
Describe the problem which requires a decision to be made.
In the current design for Phase 1 go live, goods receipts from production will be generated through interfaces I608 (when production is receipted in PRISM) and I622 (when production is receipted via OPUS). This will update the stock levels in the ECC system. As the Core Interface (CIF) between ECC and APO will be active, the stocks will also be updated in APO.
In APO, the production orders will not be reduced by the confirmed amounts until the PRISM to APO interface (I642) runs overnight. Until the production orders are reduced there will be double counting in APO leading to incorrect planning and GATP results.
*Options(
List the options that have been considered as potential solutions
Option 1: Increase the frequency of the current PRISM to APO interface.
Option 2: Build additional Interface between PRISM & APO for production confirmations.
Option 3: Build enhancement to ECC GR to update APO production orders.
Option 1: Increase the frequency of the current PRISM to APO interface
Describe the pros and cons of option 1
Pros
No change to system design
Cons
Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
Interface method requires deletion/creation of production orders in APO which will cause issues for APO users
Option 2: Build additional interface between PRISM and APO for production confirmations
Describe the pros and cons of option 2
Pros
Interface method of updating production orders will not cause issues for APO users.
Cons
New interface
Development work required in PRISM to feed new interface
Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
Delay between GR from OPUS and production confirmation from PRISM to APO
Option 3: Build enhancement to ECC GR to update APO production orders.
Describe the pros and cons of option 3. If only 2 options, then delete this section. If more than 3 options, then add further sections.
Pros
Ties the APO production confirmation to the ECC goods receipt, mimicking phase 2 scenario
Will not cause issues for APO users
Removes timing issue between goods receipt and production order confirmation
Cons
New development.
Assumptions for Proposed Development:
Utilise available BADi upon posting of goods receipt
Will generate qRFC that will run Production Confirmation BAPI in APO
BADi executes in update task of goods receipt
Interface for goods receipts will contain PRISM production order number
Recommended Decision
State which option is recommended as the decision, and the reason why this option has been recommended.
Option 3: Build enhancement to ECC GR to update production orders in APO.
Regards
Raj

Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal repor

HI Expert
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal report
Need Step by Step Procedure whatl all we come across while Generating report from SAPBI (ECC(Functionmodule/view/BAPI)
to Crystal report what all integration and setting we need to do
Thanks and Regards
AhmedPasha

Hello,
Ingo Hilgefort has documented this step by step in this SCN article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe?QuickLink=index&overridelayout=true
Starting on page 13, you can use the same steps - he selects data from a table join, you select FN instead for function module.
You can also get to it via this link:
http://www.sdn.sap.com/irj/sdn/business-objects-bi-for-sap?rid=/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe
Regards,
Tammy

Issue in transfer of data from ECC to APO

Hi All,
I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
How should I proceed...Please help....this is an urgent requirement
Thanks & Regards,
SriLalitha

Hi,
you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
Determine Forecast of Replenishment Lead Time
Use
In this field, you specify how the extended safety stock planning determines
the forecast of the replenishment
lead time (RLT). The following values are available:
Supply Chain
The system determines the RLT forecast using the supply chain structure by
adding the corresponding production, transportation, goods receipt, and goods
issue times. If there are alternative procurement options, the system always
takes the
longest
option into account.
Master Data
The system determines the RLT forecast from the location product master
data.
Master Data/ Supply Chain
First, the system determines the RLT forecast from the location product
master data. If no RLT forecast can be determined, the system determines the
forecast using the supply chain structure (as described under
Supply
Chain
Dependencies
You can retrieve the replenishment lead time forecast yourself by using the
GET_LEADTIME
method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
Replenishment Lead Time in Calendar Days
Number of calendar days needed to obtain the product, including its
components, through in-house
production or external
procurement.
Use
The replenishment lead time (RLT) is used in the enhanced methods of safety
stock planning in Supply Network Planning (SNP). The goal of safety
stock planning is to comply with the specified service level, in order
to be prepared for unforeseen demand that may arise during the replenishment
lead time. The longer the RLT, the higher the planned safety stock level.
Dependencies
The field is taken into account by the system only if you have specified
master data or master data/supply chain in the RLT: Determine
Forecast field of the safety stock planning profile used.
Hope this helps.
The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
May be if you maintain the setting in the profile, you may get the value in RELDT.
Thanks.

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

Transfer Data from ECC to SRM

Hi ,
I'm trying to transfer data from ECC to SRM for creating bid document ( Function : BBP_PD_BID_CREATE ). After transferring the data I want to get the data back to ECC ( I need bid document number to write on delivery document's field ). What's the best way to do this ?
Regards.

Hi vinit ,
I've written code to call 'BBP_PD_BID_CREATE' in ECC. But ECC and SRM have different structures. So i am not sure how i can define data to send SRM.
Here is my code in ECC program
CALL FUNCTION 'BBP_PD_BID_CREATE' IN BACKGROUND TASK
   DESTINATION 'XXX'
   IMPORTING
     I_REF_GUID    =
     I_BAPIMODE    =
     I_PARK        =
     I_SAVE        =
     I_TESTRUN     =
     I_HEADER      = I_HEADER ?
     IT_ATTACH     =
     IT_DYN_ATTR   =
     IT_CONDITIONS =
    EXPORTING
      E_HEADER      = E_HEADER ?
      ET_ATTACH     =
      ET_DYN_ATTR   =
      ET_CONDITIONS =
    TABLES
       I_ITEM        =
       I_PARTNER     =
       I_LONGTEXT    =
       I_SDLN        =
       I_ORGDATA     =
       I_HCF         =
       I_ICF         =
       I_TOL         =
       I_WEIGHT      =
       IT_EXCHRATE   =
       E_ITEM        =
       E_PARTNER     =
       E_LONGTEXT    =
       E_SDLN        =
       E_ORGDATA     =
       E_HCF         =
       E_ICF         =

I am extracting the data from ECC To bw .but Data Loading taking long tim

Hi All,
i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last 6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
Thanks ,
chandu

Hi,
There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''. Also give '*' to user name.
Job name: REQ_XXXXXX
User Name: *
Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
Let me know if you still have questions.
Assigning points is the only way of saying thanks in SDN.
Thanks,
Kumar.

ORA-28522 error when reading data from DB2 via hsodbc

Hi All,
I'm trying to connect to a DB2 database running on an AS/400 system, via Oracle HS.
I'm using Oracle 9.2.08. The DB2 version is V4R5.
My ODBC DSN is called TEST_odbc.
The initTEST_sid.ora file contains the following:
HS_FDS_CONNECT_INFO = TEST_odbc
My Listener.ora file contains the following:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = vm-dashboarddemo)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = hsodbc)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = TEST_sid)
My TNSNames.ora file contains:
TEST_name =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = VM-DASHBOARDDEMO)(PORT = 1521))
(CONNECT_DATA =
(SID = TEST_sid)
(HS = OK)
When I use TNSPing, I get a successful result:
D:\oracle\ora92\bin>tnsping TEST_name
TNS Ping Utility for 32-bit Windows: Version 9.2.0.8.0 - Production on 04-JUL-20
07 13:46:47
Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved.
Used parameter files:
D:\oracle\ora92\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = VM-DASHBOARDDEMO)(PORT = 1521))) (CONNECT_DATA = (SID = TEST_sid)) (HS =
OK))
OK (10 msec)
I can then login to SQLPlus as SYSDBA, and create a database link:
SQL> create database link TEST_link connect to "<username>" identified by "<password>" using 'TEST_name';
Database link created.
So far everything seems to be going well.
But then, when I try and select some data from the linked database, i get the following:
SQL> select * from <tablename>@TEST_link;
select * from <tablename>@TEST_link
ERROR at line 1:
ORA-00942: table or view does not exist
[Generic Connectivity Using ODBC][IBM][Client Access Express ODBC Driver
(32-bit)][DB2/400 SQL]SQL0204 - ZASTSE00 in QGPL type *FILE not found. (SQL
State: S0002; SQL Code: -204)
ORA-02063: preceding 2 lines from TEST_LINK
Does anyone have any ideas? I'd love to get this solved!!
Many Many Thanks,
River

I should have mentioned that I know that the table exists in the database.
The main reason I'm trying to do this is because I'm trying to get the data from the DB2 DB into my Oracle DB. I have been trying the EXP utility, which gives me a different error code:
D:\oracle\ora92\bin>exp <username>/<password>@TEST_name file=TEST.dmp rows=yes indexes=no
Export: Release 9.2.0.8.0 - Production on Wed Jul 4 13:44:06 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
EXP-00056: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
Username: <username>
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
Note: indexes on tables will not be exported
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user <username>
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user <username>
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
Thanks Again,
Riv

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

Get Plant data From ECC Via. Midedleware

Similar Messages

Maybe you are looking for