Get running process model name

Hi,
I'd like to test during the execution of my sequence
1) If there is a process model which has launched the sequence
2) The name of the process model which has been launched
Does someone knows the sentence ??
Cause i've tried this in a "if" step and it doesn't seem to work properly :
RunState.IsProcessModel && RunState.Execution.GetModelSequenceFile().AsPropertyObject().Name == "Single Pass"
Solved!
Go to Solution.

HI Nanor,
you should try this:
.... && StrComp(RunState.Execution.GetModelSequenceFile().AsPropertyObject().Name, "Single Pass") == 0
Hope this helps
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

Obtain process model name in CVI

How can I get the name of the process model in CVI?
The process model is switched between sequential and batch model and need to obtain the name of the currently used process model.
In the fiunction
CVIVALLBACK ApplicationMgr_OnStartExecution(
CAObjHandle caServerObjHandle, void* caCallBackData, TSUIObj_Execution execution, TSUIObj_Thread thread, VBOOL initiallyHidden)
CAObjHandle processModelSeqFileName;
char *processModelName = {0};
tsErrChk( TS_ExecutionGetModelSequenceFile (gMainWindow.engine, &errorInfo, &processModelSeqFileName));
tsErrChk( TS_SequenceGetName (processModelSeqFileName, &errorInfo, &processModelName));
if(processModelSeqFileName)
CA_DiscardObjHandle(processModelSeqFileName);
CA_FreeMemory(processModelName);
The function TS_ExecutionGetModelSequenceFile () returns "No such interface supported"?
TIA.
CLD,CTD

Here are the changes made that got rid of the error but still does not get the process model path. processModelName in TS_SeqFileGetModelSeqFile returns "none" always and SeqFileObject is zero, any ideas?
if(execution)
tsErrChk( TS_ExecutionGetModelSequenceFile (execution, &errorInfo, &processModelSeqFileHdl));
if( processModelSeqFileHdl )
tsErrChk( TS_SeqFileGetModelSeqFile (processModelSeqFileHdl, &errorInfo, &processModelName, &SeqFileObject ));
if( SeqFileObject )
tsErrChk( TS_SeqFileGetModelPath (SeqFileObject, &errorInfo, &processModelPath));
CLD,CTD

How to get the process chain name if we know the data target in sap bi

Hi SAP BI Gurus,
Can any help me how to find the process chain name if we know the data target name
i mean if i know the info cube name how to find the relavant process chain which is holding that info cube
Thanks,
Joe

Hi R Kumar,
Check the table RSPCCHAIN.
I mean, Use Table RSPCCHAIN and give the local chain tech name in VARIANTE field and search, in out put you will get meta chain name under the field CHAIN_ID.
Thanks,
Sreehari.

How to get all the Model name and Entity name through programmatically

I am using this code to get Model name
clientProxy = GetClientProxy(mdsURL);
ModelMembersGetRequest request = new ModelMembersGetRequest();
ModelMembersGetResponse response = new ModelMembersGetResponse();
response=clientProxy.ModelMembersGet(request);
Model member count i am getting zero
Error count is 1(required parameter is missing)
please help me to resolve the issue

The model/entity/attribute name can be retrieved by MetadataGet.
You can found some sample code here:
http://sqlserversamples.codeplex.com/wikipage?title=SQL%20Server%202012%20Master%20Data%20Services%20

Bios Model Name

We are currentley rolling out Lenovo Desktops And Laptops as part of the rollout we have a script which pulls in manufacture, model description, serial no
When we get the Model description we get the following model name
Examples below
20AWS17D01
10A8S0830Q
Is there a Conversion table to say the what the codes are E.G. M93p desktop ?

You'll have to build your own conversion table, but the PSREF lists for each product line provide the raw data for what you want.
PSREF info for Thinkpad laptops.
PSREF info for ThinkCentre desktops.

How to get Application name of a current running process in LiveCycle??

Hi,
I want to get the Application name of current running process in LiveCycle as a output value.
I have 3 applictions, the 3 applications are calling same SubProcess, so I want get the name of the application from which the sub process has been called.
I want to retrieve the Application name and asssign this value to a output variable.
I have searched for the solution I found a method getApplicationName() but inorder to get the current running process's Application Name this might not be useful..
So suggest the way to resolve this..
Thanks in Advance.....
Regards,
Kalyan Urimi

Use an input/output string variable in the subprocess and set its value in each calling process as respective Application name.
May be if this could help.
Thanks,
Wasil

Getting sequence filename and sequence name in process model error handler

We are using the sequential process model and would like to log sequence step error information to a file. We have an Error Handler callback in SequentialModel.seq and that is where we will write to the error file. In the Error Handler callback, I can get the error container info for the step where the error occurs and the name of the that step thru the Error Handler Step parameter. I would also like to record the sequence file and the sequence where the error occurred, but I have not been able to find those in the sequence context. I know they are available because the TestStand RunTime Error dialog box displays them. How can I access the name of the sequence file and the name of the sequence where the error occurred?
Thanks,
Hans

Hey hans,
Use the API. Since you already have the Step object reference coming in as a parameter you can just use a few ActiveX steps to get the Sequence File and Sequence from which the error was thrown.
Step.Sequence
Sequence.Name (gets the name of the sequence)
Sequence.SequenceFile
SequenceFile.Path (gets the path of the sequence file)
So basically just 4 activex steps. I hope this helps.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

What property is the current step name in MainSequence (client sequence) stored in to access in a process model?

I'm trying to get the name of the current step that is about to be run in the MainSequence from a Process Model. This will be accessed in a "ProcessModelPreStep" callback. Thanks!

Hi
(TestStand 2.0.1f1)
I have a attached an example ProcessModelPreStep callback to get that step name. I use the NameOf ( Parameters.Step).
I hope this is what you are after.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏161 KB

Finding the name of my teststand sequence in the process model

I would like to be able to find the file path and name of a teststand sequence in the process model. I have created a simple vi which will display this information when run in a sequence. If i insert the vi into the process model, the file path and name returned is that of the process model and not the sequence under exectution. Is there a way of extracting this information in the process model?

Davepar -
If you are executing in the process model you can use the following as a lookup string if you are in the root context "RunState.ProcessModelClient.Path" or "RunState.Root.RunState.ProcessModelClient.Path" if you are not in the root context.
Scott Richardson (NI)
Scott Richardson
National Instruments

I have a MackBook A1181 I need to upgrade my Safari so Outlook will work and would like to get some kind of word/writing tool on it... the info is: Model Name:     MacBook   Model Identifier:     MacBook1,1   Processor Name:     Intel Core Duo   Processo

I have a MackBook A1181 that I bought off Ebay :/ it came with pirate discs and no info....I need to upgrade my Safari so Outlook will work and would like to
get some kind of word/writing tool on it... the info is:
Model Name:          MacBook
Model Identifier:          MacBook1,1
Processor Name:          Intel Core Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per processor):          2 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB11.0061.B03
SMC Version:          1.4f12
Serial Number:          4H631CVDU9B
Sudden Motion Sensor:
State:          Enabled
Can anybody help?!

First correct the pirate disc issue. Buy OS X 10.6 Snow Leopard from Apple for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Snow Leopard is the latest version your macbook 1,1 will run. Oitlook is part of the Microsoft Office suite, if you want outlook you'll need to also purchase Office. If you can get by with Apple's mail program there are free alternatives to Office like Libre Office or Open Office.

Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:     iMac   Model Identifier:     iMac12,1   Processor Name:     Intel Core i5   Processor Speed:     2.7 GHz I am running OSX 10.6.8

Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:
iMac   Model Identifier:
iMac12,1   Processor Name:
Intel Core i5   Processor Speed:
2.7 GHz I am running OSX 10.6.8

So just to be clear on a few things:
Should partitioning the hard drive not work is it undoable?
Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
Is there a limited amount of space that makes this process ineffective?
I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
Thanks again

In FIM datasource creation,model name dropdown menu not getting populated

Hi
When we try to create a new datasource in FIM it asks for a default model name. The default model name drop down menu is not getting populated by the model name. Please suggest what could be the possible solution for the same.
Regards

Hello,
There are 3 other things to check if the PCM schema is on a Oracle database :
From FIM server :
1.a. Locate the "ojdbc6.jar" file located in the \jdbc\lib subfolder of your Oracle client installation folder and copy it.
1.b. Paste the copied file in C:\Program Files\Business Objects\Tomcat6\webapps\fim\WEB-INF\lib folder.
Note: This procedure is mandatory for an Oracle repository. Adding the path to the classpath variable is not
sufficient.
2. From the Tomcat Management Console properties, you need to add the path to the location where the tnsnames.ora file is hosted. You add this information on the Java page of the Apache Tomcat Properties dialog box under "Java options", for example, -Doracle.net.tns_admin=C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN
3. From the parameter "Net service name" filed for PCM datastore in FIM, make sure that the name matches exactly (case-sensitive) with the name of the service set into the Tnsnames.ORA file
Hope these additionnal findings would help you.
Thi Anh Antunes

Can I get a List of all the running processes in the system using java ?

I want a complete list of all the Running processes currently in the system.
List of running processes is like, in MS Window environment while we presses ctrl + alt + del and we get a small window containing a list of all the running processes currently in system.
I hope somebody have done the same and will help me.
thanx.

Here is the sample code to get All running process in your system .
Its in C++.And you have use JNI to use this code.
For complete project goto
http://www.mindcracker.com/mindcracker/c_cafe/winapi/protracker.asp
typedef BOOL (WINAPI * PFNENUMPROCESSES)(
DWORD * lpidProcess,
DWORD cb,
DWORD * cbNeeded
typedef BOOL (WINAPI * PFNENUMPROCESSMODULES)(
HANDLE hProcess,
HMODULE *lphModule,
DWORD cb,
LPDWORD lpcbNeeded
typedef DWORD (WINAPI * PFNGETMODULEFILENAMEEXA)(
HANDLE hProcess,
HMODULE hModule,
LPSTR lpFilename,
DWORD nSize
//unsigned int i;
static HMODULE hModPSAPI = 0;
static PFNENUMPROCESSES EnumProcesses = 0;
static PFNENUMPROCESSMODULES EnumProcessModules = 0;
static PFNGETMODULEFILENAMEEXA GetModuleFileNameExA = 0;
if ( !hModPSAPI )
hModPSAPI = LoadLibrary( "PSAPI.DLL" );
if ( !hModPSAPI )
return FALSE ;
EnumProcesses = (PFNENUMPROCESSES)
GetProcAddress( hModPSAPI,"EnumProcesses" );
EnumProcessModules = (PFNENUMPROCESSMODULES)
GetProcAddress( hModPSAPI, "EnumProcessModules" );
GetModuleFileNameExA = (PFNGETMODULEFILENAMEEXA)
GetProcAddress( hModPSAPI, "GetModuleFileNameExA" );
if ( !EnumProcesses
|| !EnumProcessModules
|| !GetModuleFileNameExA )
return FALSE;
LV_ITEM lvi;
CString str, str1;
if ( !EnumProcesses( aProcesses, sizeof(aProcesses), &cbNeeded ) )
return FALSE;
cProcesses = cbNeeded / sizeof(DWORD);
char szProcessName[MAX_PATH] = "unknown";
for ( int i = 0; i < cProcesses; i++ )
HANDLE hProcess = OpenProcess( PROCESS_QUERY_INFORMATION |
PROCESS_VM_READ, FALSE, aProcesses);
if ( hProcess )
HMODULE hMod;
DWORD cbNeeded;
if ( EnumProcessModules( hProcess, &hMod, sizeof(hMod), &cbNeeded) )
GetModuleFileNameExA( hProcess, hMod, szProcessName,
sizeof(szProcessName) );
str = szProcessName ;
str1.Format(": %d ", hProcess );
str += str1 ;
m_list.AddString ( str );
UpdateData(TRUE );
CloseHandle( hProcess );

How to get the list of all running process in java

hi all,
i want to get the list of all running processes on my system. please let me know if it is possible to do with JAVA. which class i should use?
waiting for reply
bye

Wrong forum. Just a hint.

Add serial number in the report file name when using batch process model

I would like to append a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if I use NI BatchModel.seq as my process model.
Thanks!
Jacky

duplicate post
Ask your question only once.

Get running process model name

Similar Messages

Maybe you are looking for