Add serial number in the report file name when using batch process model

I would like to append a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if I use NI BatchModel.seq as my process model.
Thanks!
Jacky

duplicate post
Ask your question only once.

Similar Messages

How to add Serial Number to the report name?

HI,
I'd like to add the option of including the SN to the report name. A good option will be to automatically set the default base name to the SN.
I'm open to suggestions. Either a simple solution where I'll always get the SN as the base name, or
a more complicated solution where I can really make some modifications to the report option dialog page to include that upon user selection.
Thanks
Rafi
TS3.5+CVI8.0
p.s. an example, if exist, will be highly useful (and appreciated of course)

That's okay... I can answer here as well...
Under Configure >> Report Option
UNSELECT "Store UUT Report in Batch Report File" first, then select "New UUT Report File for Each UUT"
New UUT Report File for Each UUT—Appends a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if you select Store UUT Report in Batch Report File.

How do I retain the original file name when using Compressor?

Hello,
I am in the process of doing a batch export and would like to keep everything identical to the source material, including the name. There is quite a bit of footage so deleting the "-Apple ProRes 422 for Progressive material" addition can be time consuming.
Any suggestions?
I found this thread:
http://discussions.info.apple.com/thread.jspa?threadID=2369070
but even though I read it more than 10 times I could not set a "custom" path in my destination options.
I only have the following options available from the pulldown:
-Cluster Storage
-Desktop
-Source
-Users movie folder
Any help is greatly appreciated.
Message was edited by: Ricardo Javier

As was mentioned in the thread you linked to, the easiest way is to create a custom Destination. Here are some step-by-step instructions:
1. Click the Destinations tab.
2. Click the plus sign in the upper right and choose "Local..."
http://dl.dropbox.com/u/19589/Compressor%20Custom%20Destination.png
3. Navigate to or create your destination folder. Click "Open" to select the destination.
At this point, you've created a new custom destination. To select it, click the disclosure triangle next to the "Custom" folder. This is where all of your custom destinations are located.
4. Select the custom destination you want to use for your batch.
5. In the inspector, you'll see a box where you can change the "Output Filename Template". By default, it'll just have "Source File Name". If that's all you want, then press return.
http://dl.dropbox.com/u/19589/Compressor%20Destination%20Inspector.png
Now, when you go back to your batch window and apply this custom destination to your job settings, Compressor will apply the Output Filename Template to your filenames. Basically, it will get rid of the setting name (as long as you only have "Source File Name" in the Filename Template.
Hope this helps.

How to reduce file size when using batch processing?

I use File > Process Multiple Files to batch process photos to a smaller file size along with adding my watermark. I've played with many different settings and no matter what I choose, I can't get my average file size to be less than about 200k. However, when I've exported the same photos using iPhoto, I can get the file size to about half of that with no difference (to my naked eye at least) in quality.
I definitely want to keep the height at 768 pixels so that needs to stay constant.
My current settings in batch processing (average file size = 200 kb)
Resize images with a height constraint of 768 pixels at 150dpi
What I've tried:
Resize at 72dpi (reduced file size by about 5kb)
convert file to JPEG low quality (reduced file size by about 10kb)
convert file to JPEG medium quality (not much difference in file size)
I'm using PSE 10 on a Mac running Lion.
Thank you in advance for your help!

You should go with default settings of Optimizer.
One difference between default settings of Optimizer and Reduce file size is that Optimizer does not guarantee a reduction in file size (if your Optimizer settings lead to an increase in file size, that's what you will get).
With Acrobat 9, the default setting in Optimizer has an additional setting which would not do an image optimization that results in increase of file size. In that sense it would in most cases give a smaller file.

How to add Serial Number to the batch report name?

How to format the report name for batch model to have <Sequencename>_<batch_SerialNumber>_<DateTime>.xml. Everytime a different sequence is executed the report file name should be formated with that sequence name and batch serial number porvided. I am using TS4.1
Sequential model has a Determine Report File Path, is there something similar for batch model also, if so where?
Thanks.
CLD,CTD

Did hit Post too early, here is the remaining,
For the second part
have the serial number of each individual DUTs included in its file name
The setting in Report Option will also save the UUT report with UUT serial Number included in the following format:
SeqFileName_[UUT][Date][Time].xml where [UUT] will store the UUT serail number.
CLD,CTD
Attachments:
reportOptions.jpg ‏85 KB

How to print the report file name and path and the last mod date

Good morning,
I am trying to print on the footer of the report the report file name and path as well as the report last modification date.
Anyone would know how I can do that? I have checked the doc but found nothing.
Thks. Philippe.

Did you ever determine how to print report name and report last mod date?
Thanks

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene

How can I change the report file name depending on which seq file is run in the main seq?

I'm using TestStand 3.0.
I have a main sequence file with a menu option to select one of several sequence files to run.
How can I get TestStand to change report file name to the selected sequence file rather than the main sequence file name?
Thanks
Harminder

Hi Harminder
Try RunState.Root.Locals.ReportFilePath = "PathToMyFile.xxx"
regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Display of serial number in the report

Hi experts,
   I wanted the serial number in my report based on plant .I am getting it based on my sub divisions of plant .Also i wanted this column as the first while dispplayed in the re[port.
can anyone please suggest me a solution for this issue?

thanks syed but i want a new column in my report level based upon the plant like
1. aaa
2.bbb
but i get it based on the subgroup like
aaa asdf 1
         dfgh 2
         hjkl    3
bbb   asdf 1
         dfgh 2
         hjkl    3
the correct output what iam looking for is
1.aaa asdf 1
           dfgh 2
             hjkl    3
2.bbb   asdf 1
           dfgh 2
            hjkl    3

Add Counter to File name when using Tran Protocol as FTP

Hi There,
Was wondering if there was any way to achive the same "Add Counter" functionality used for File names in Reciever file adapter when we are using FTP as the transport protocol, this option is only provided in NFS,
My requirement is ..
Write files using counter on to ftp..
say if three files already exists on the ftp server with names ...fname001, fname002 and fname003
then the next time a file is written it should have a file name fname004 else fname001 if no file exists.
Any help would be greatly appreciated

No such standard functionality is available in communication channel...
But you can try customizing ur scenario in one of the following ways...
Case 1: If a field in source data carries the information regarding the sequence.
You can map this value ( Directly .. or using some transformation ) in some temporary field in the target and then use a Variable substitution at the receiver communication channel.
Case 2. If the source file name carries the sequence information. then you can enable the Adapter specific settings in the Sender communication channel , and then get the information of the source file name using the Container object in the mapping. Then assign the sequence number to a field in the target , use a Variable substitution at the receiver communication channel.
Case 3 : If Case 1 and Case 2 are not applicable ... then you have to use a Ztable to store the sequence number , a function module to fetch the number , and then use a UDF in which you will implement the RFC call logic.Then the same process .... assign the sequence number to a field in the target , use a Variable substitution at the receiver communication channel.
BR,
Sushil.

Uploaded home movies revert to the original file name when added to iTunes?

I have Home Video files that I have renamed from the original file names. When I add these files to iTunes, the files revert to the original file name at the time the file was created. How can I add these files to iTunes with the new file name without having to rename every Home Movie that has been added?

OK I have done some more work and think i have the issue resolved. The problem lies with file formats specifically .mp4 and .m4v
I suspect the files you are importing are mp4 files. When I do this i get the same behaviour of file names changing their name after playback. When i convert my files to m4v format and import the issue disappears.

I down loaded the Aperture trial from the internet. I bought the Aperture 3. I put the Apple Product Serial Number in the box. However when I open the Aperture 3 program, it still says Aperture 3 Trial Library. Is this normal?

I down loaded the Aperture trial from the internet. I bought the Aperture 3. I put the Apple Product Serial Number appropriate litlle box. However when I open the Aperture 3 program, it still says Aperture 3 Trial Library. Is this normal?

Hi TD,
Thank you for the quick reply, very helpful. Now I can sleep in peace and without worry. I had transferred 30.000 pictures and was a little worried.
Kind regards,
Peter.

Help with image file names when using Import Word document feature

Hello,
I am using File >> Import >> Word document into an HTML template. If the Word document contains images, the images are written to the directory specified in my Site Default Image Folder. Here is my question: As I was teaching myself the Import function, one time the images were automatically named to match the page name. So for example, if my page is named Create.html, the images would be named Create_image001.jpg, Create_image002.jpg, etc. I can't remember how I enabled this feature (or maybe I was dreaming) but if anyone knows how to control the name of the images imported from MS Word, please let me know. I've searched and Googled for hours and can't find a way to control the image file names.
Thanks in advance,
Shellie

I was hoping that this would be fixed in the 10.8.2 upgrade but it has not. Anyone have any luck? Earlier today I was trying to write a paper and navigating between 10 pdfs was a nightmare without being able to hover my mouse for the titles like I used to.

File names when using "Save Image As..."

I am using Safari for Windows to read Gmail. When I open an image and want to save it, I right-click on "Save Image As..." Instead of displaying the images file name in "File name:" it always says "mail" requiring me to re-type the file name for every photo I save. It also saves every file as "All Files" instead of as a jpg image which my photo viewer does not recognize as even being there.
Any help would be appreciated.

As an addendum, the 10.6.8 OS has also been sluggish when I log in or out of my computer (my old PowerBook G4 boots faster after being off). Otherwise, everything else seems normal.

Displaying serial number in the report output

Hi everyone
may i know hw can we display serial number inthe report output.

hi,
Assuming that you wanted to print the entries of internal table record by record ... do this way ...
loop at itab.
write : sy-tabix. " Record Position
endloop.
Regards,
Santosh

Add serial number in the report file name when using batch process model

Similar Messages

Maybe you are looking for