Get started with file and font sync

Get started with file and font sync how do you access the 700 free fonts?

Have you requested and received an email that you're eligible for File and Font Sync early access?
If you have, go to creative.adobe.com and download the latest version Creative Cloud desktop after you log in with your Adobe ID.
Then when installed, you should be able to click on Fonts to browse on the Typekit website.

Similar Messages

Files and font sync turn off working with InDesign..

Hi
Files and font sync turns off when I work with InDesign directly on the CC disctop files folder. It use to be ok to work directly in sync mode, but apparently not any more. I guess the problem is the backup file that InDesign creates, that consist of signs behaps not allowed (?). It use to work for me, but not any more..?
Do anyone els have the same problem?
Jørgen

Hi again
Thanks for your reply. In the Creative Cloud Help page I get, it says: "Save and close the file when you're done editing it and the error goes away.", but I actually have to reconnect. The bad thing about this is that it turns off the font sync as well when I was working.
I have temporarely solved the problem, simply be changing the name of the file I'm working on. I have tryed to reproduce it with a different name - all with leagal signs according to the page mensioned above - with no success (which is positive). Then I tryed to move the file to a new folder within the folder I was working on, and then it worked without problem. Strange.
I guess, if I run in to the same problem again, I will just try to change the name.
Thanks
J

File and Font Sync

A day ago, my file and font sync in the Creative Cloud desktop app stoped functioning on two seperate computers saying "file and font syncing is off." I've turned it back on several times, only to have it turn itself off monments later.
I am running OS X 10.9

I'm having this issue as well - started about a week or two ago. I don't use the file sync often since I've had more problems with it than it's worth, but I would like to have access to TypeKit font syncing. I followed the steps listed by aaronquigley, but unfortunately have not had any luck getting it up and running again.
The problem only occurs on my Mac (10.8.5) - everything seems to work fine on my Windows 7 machine...

Why can't I turn on File and Font Sync in Creative Cloud?

Why can't I turn on File and Font Sync in Creative Cloud?

I'll send an email to that as well but the same issue occurs with file sync. I have this on my personal account but not our CC for teams accounts.
These are what I see when I click those tabs in my Creative Cloud window.
Any help would be appreciated.
Thanks

Where do I get started with OAS and JSP ?

Where do I get started with OAS and JSP ?
Resources?
Please point me in the right direction!
Post and/or email me at [email protected]

The simplest way is to read OAS4082 Documentation:
Developer's Guide: JServlet and JSP Applications.

Creative Cloud files and fonts sync problem

Hi
I'm working on two diffents mac's, one at work and one at home - with a creative cloud membership. On both computers, the Files and Fonts does not connected/sync. Annyway, I can't use the fonts on either of the mashines. The CC app is open, and therefor should work with e.g. the fonts I allready synced to my computer . Apparently I can solve this by quiting the Creative Cloud and restart, but I hope this could be solved somehow.
Anyone have an idea or a way forward?
Jørgen

Hi Dave
It seams to be working now on both computers, after the last update - thanks!
Just arrived home, and my home computer Creative Cloud connection is not working as it should for Files and Typekit. I'm not getting any error messages - it just doesn't connect i seams. I include some screenshots - but I don't think they will say much. It is as if there is some problem when it is trying to load/connect while other programes are auto loading (I guess?). So I still need help. Here is some screenshots. I can still restart the CC and then it connects as it should. And, I have the same problem on an other mac:
Jørgen

Getting started with Java and XML

Hi,
Although I am pretty familiar with Java, I am a total newbie with using it to parse XML. I have been reading quite a few tutorials so am getting a good understanding of it and am thinking of using the DOM model for my purposes.
What I haven't been able to find, however, is how I can actually get started with this. I have tried compiling a few examples and have been getting errors such as:
xmltest.java package javax.xml.parsers does not exist
xmltest.java package org.w3c.dom does not existetc etc...
It looks like these packages don't come with J2SE. Can anyone confirm this? Do I need to download and install the Java Web Services Developer Pack to solve this problem?
Finally, I know I will need an XML parser but have read that JDK 1.4 has it's own parser (Crimson). Is this adequate for parsing XML files or will I also need a parser such as Xerces?
Thanks so much for any help!

Hi DrClap,
Thanks for the reply. I have JDK 1.4.1_02 installed on my server but the following error keeps coming up when I try to run my example:
Exception in thread "main" java.lang.NoClassDefFoundError: org/w3c/dom/NodeAre there any further packages I need to download in order to run Java with XML? I have read some people install JAXP and XERCES... are these necessary for parsing an XML document or should J2SE 1.4.1 be sufficient?
Thanks for your help!
Jill

Getting started with ATG and Eclipse

Hi,
I am newbie in ATG web commerce. I am doing some R&D how to integrate ATG with eclipse JBoss and oracle. I searched on Google, there is one very interesting topic about getting started with atg, jboss, oracle :
http://atgdeveloper.wordpress.com/2009/04/19/getting-started-with-atg-jboss-and-oracle
It is very helpful to me but there is one problem what are the requirements of eclipse to integrate it with ATG. Is there any ATG plugin, which I can download all the plugin for eclipse and please can anyone help me if there is any ATG configuration documentation available, please share link or document(if there is complete step-by-step documentation available).
I will greatly thankful to you. Very very thanks in advance.
Thanks,
Manveer
Edited by: msingh on Nov 9, 2011 3:37 AM
Edited by: msingh on Nov 9, 2011 3:38 AM

Hi GarethR,
I have a looked on ATGInstallationGuide.pdf, which url it shows is not working http://www.atg.com/eclipse. I think the url for ATG plugin has been changed now but I didn't found that url on google. Can you please help me to get correct url.
When I try to use this url using eclipse update manager. It shows me no features available for this site.
Thanks,
Manveer

Getting started with oracle and jdbc

i have downloaded ojdbc14.zip from oracle.com
it's documentation only tells you about the api and the packages and nothing about how to configure it.
how do i get started? where do i unzip those files and what to do next?
please help

"The Old oracle.jdbc.driver Package Will Go Away Soon
If you still have existing applications that use the
old oracle.jdbc.driver
package, now is the time to convert your code."
And who is so foolish as to use concrete types
instead of java.sql and javax.sql interfaces or embed
driver class names in their code? Well, anybody who's more interested in optimal performance than being generic, and willing to put up with the headaches of that, such as providers of high-performance OR mapping tools or someone tuning a very heavily used bit. Or anybody working in a committed Oracle-only shop. It's not a one-size-fits-all world...
Again, Oracle is evolving the standard. No, the standard is Sun's java.sql interface.Yea, Sun evolved Java, and Oracle is recommending the use of Datasources to keep step with that evolution...
This still
works, but Oracle is shifting away from <sid> and
using <service name> instead. The alternate syntax
for the URL is:
String url=jdbc:oracle:thin:@<host>:<port>/<database>
This has been true for as long as Oracle has had a
thin, type IV JDBC driver. The URL syntax hasn't
changed.
Yes it has and Oracle says it has, here:
http://download-west.oracle.com/docs/cd/B14117_01/java.101/b10979/urls.htm#BEIJFHHB
Wherein it is written, in Section 3.2.1 of the Oracle� Database JDBC Developer's Guide and Reference, the sesction on the several supported URL formats for Oracle 10.1
Notes:
* Oracle Service IDs are no longer supported at 10g Release 1 (10.1).
They go on to list three URL styles supported:
Oracle Net connection descriptor - like an entry in tnsnames.ora (ick!)
Thin-style service name - the most common, what was quoted above.
LDAP syntax - for having an LDAP service resolve the database for you
However, in the old 8.1.7 JDBC documentation, here:
http://download-east.oracle.com/docs/cd/A87860_01/doc/java.817/a83724/basic1.htm#1006213
Oracle lists support for:
Net8 connection descriptor - Net8 is the old name for Oracle Net
Thin-style sid name - what was quoted in the post to which I first responded.
Thin-style sid name syntax has a colon between the port and the sid; thin-style service name syntax has a forward slash between the port and the service name. SIDs and service names are not the same thing, although they serve the same purpose in a URL (connecting you to the right instance) and often have the same value. However, a SID for a database is set at DB creation time, is unique to the DB, and cannot be changed easily. Multiple service names can be configured for a database, and they can easily be changed (if you're the DBA). Oracle is providing an additional leval of abstraction by moving to service names, to support additional features and choices. While many installations don't need all that and have in essence ignored the distinction bewteen SID and service name, some multi-database projects can benefit from it.
>
StuDerby, I think you should look into this a bit
more. Your advice is far from optimal, IMO.
Yeah, I could've taken the time to write a more generic, newbie friendly repsonse; instead, I lifted directly from the Oracle documentation that was cited earlier since newbies seem to have an aversion to reading documentation.

Getting started with air and android

Hi,
I made a game using flash as3 technolgy some time ago, that is deployed in a website. I've been studying the possibility of porting the game to mobile devices (android). Is that possible? Wich level of effort am I going to need? Wich tools from adobe am I going to need?
I think that's all for now... thanks!

That's great! I also bought a book in amazon to help me to get started
Thanks!!
Sent from my iPhone
El 09/04/2011, a les 23:20, Saumitra Bhave <[email protected]> va escriure:
The development process remains almost same. In flash development you create swf and put it in HTML using object or embed tag. In Adobe AIR you create SWF and package it using the ADT tool which comes with AIR SDK.(But, With adobe AIR you get some more APIs which you don’t have in Flash)
While packaging you can tell the adt to package for Android, iOS or any desktop. And provide the required parameters along with the SWF and application xml.
Once you create the apk. You can install it on actual device or android simulator.
For testing purposes you can generate a self signed certificate using java -keytool command.
You can google any of the following things to get started.
1. Android SDK, adb tool, creating Android emulator
2. AIR adt - package command for android
3. java -keytool help
>

Getting started with DW and PhoneGap

I've checked the videos and the FAQs, and I can't seem to find an answer to this simple(?) question:
How do you initially create a PhoneGap app within DreamWeaver?
The videos show things such as how to upload/build/install/etc such an app, but they all start with "here's the app that's ready to build". They already have assets such as "phonegap.js" as part of the project.

Try this tutorial:
Create & package Mobile app with DW, jQuery Mobile & PhoneGap
http://www.adobe.com/devnet/dreamweaver/articles/dw-phonegap-mobile-app.html
Nancy O.

Getting started with CF10 and Dreamweaver

I'm trying to get some HS students started on CF10 and Dreamweaver (used together). Back in the day, Macromedia had an awesome little tutorial that showed how to get everything all set up and program a simple web app. Can anyone point me to a similar tutorial for CF10 and Dreamweaver. I've tried to get started but seem to get errors on every step (for example it won't let me use an Access database). My preference is to use Dreamweaver to write a lot of the code (initially).
Thanks for any help people can provide,
Ben

Here is your answer:
http://blogs.coldfusion.com/post.cfm/coldfusion-10-64bit-and-msaccess

Can't update CC Desktop after getting File and Font Sync early access

System Win 7 Home Premium

Hi GlaserKommunikation,
I don't think the two are related, or if they are, it would be rather unusual. Are you still having the issue? What happens when you attempt to update? Do you get any kind of error?
If you are still having difficulties some basic troubleshooting that might help would be:
Close all open programs when attempting to install the update, especially any security or anti-virus software
Try launching the Creative Cloud app from the Start Menu using right-click Run as Administrator command and then installing the update
-Dave

Getting Started with Flex and Java RPC for Free?

Good Morning,
Please forgive me if this is the wrong place to post- I'm
just having trouble wrapping my head around what is and what isn't
available for free in the Adobe Flex world.
I've been working on an application for the last few months
using Open Laszlo (
http://www.openlaszlo.org/),
but I've been running into frustrations with their lack of
up-to-date documentation, and I've found it difficult to bring new
people into the project, since the set of users who know it is so
small.
While I do like that I can compile to DHTML, that's not
enough to hold me there.
I've been looking into Adobe Flex, and it seems like a good
alternative- I'm comfortable paying $500 for the IDE-
I use Eclipse currently, so having a plugin for it sounds
ideal. That said, when I look into ways to talk to a Java backend,
everything points to Flex Data services, which is now part of some
larger package costing tens of thousands of dollars.
I don't need advanced messages, or data synchronization, as
nice as it would be.. All I really need is the ability to call a
Java method, and get an object back, which I can then work with in
Flex.
I see the forum message that asks
"How
do I 'do' Flash for free?, but this only talks about RPC very
broadly. Given that the message is from over a year ago, I thought
it would be better form to start a new topic, than replying to it.
Can someone explain to me what components I'd need, both on
the client side and the server side?
Is there a set of manuals that explain how to do Flex RPC
from Java?
Can Flex compile to any versions of flash earlier than 9?
(Flash 6/7 is still in wide deployment)
Do I want to start using Flex 2, or Flex 3? Are the
components compatible? Will the F3 docs be ready?
Finally, where can I purchase the Charting components? The
ability to create charts such as
this
overcome a decent price barrier.
Thank you for any insight you can offer, and direction you
can provide.

quote:
Originally posted by:
cunparis2day
On our project they made a proxy in java where they passed in
the name of the method as a string, and an array of objects for the
parameters. The proxy then sent the request via RMI and returned
the result. Kind of a hack but they say it worked (I wasn't here
when they did it).
What did the RMI talk to? Are there docs on this?
quote:
Another approach, generate the proxy from the java
interfaces. Or better yet, generate it dynamically with CGLIB.
quote:
Finally, I'm investigating using Mule for the integration.
Let me know what you think about those suggestions.
We have our own messages, but how would MULE translate them
to Flex?
You know quite a bit more about this, can you take a step
back, and explain?

Getting started with JDev and 11i

Good morning everyone. I currently have access to an 11.5.10.2 Apps instance running on ATG RUP6. I am looking to start some BPEL development and have a couple questions regarding the development and server tools necessary for this.
1. I don't have the Metalink note(s) handy, but what I've read says that for 11i development with JDeveloper, you need certain versions of JDev available from Metalink as a patch. If I recall, they are all various patched versions of JDev 9i. Is it not possible to use the latest 10g version? From what I have seen, there are many many improvements from 9i to 10g, and I would really like to use the best tool available!
2. Several blog entries and Oracle white papers discuss creating BPEL processes that will work with EBS. For example, this one here: http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/bpel_ebuz/bpel_ebusiness.htm
In the few that I have gone over, they all say to download and install JDev, 11i (11.5.10+), and the SOA suite. I do not understand the part about having to install the SOA suite -- why is that necessary? Does 11.5.10 not have the necessary components to start doing BPEL development? This is not such a big deal for someone with a personal computer doing practice development, but at a company, we are talking about having to install and maintain a rather significant component. Is there anyone here who is actively developing BPEL processes for a production environment that can share some details regarding this?
Thanks for all of your input!
ryan

I found the note to my first question: 416708.1. It says that specific versions of JDev are required depending on your ATG tech stack version. For 11i, they are all 9i versions. Specifically, it says "When you create extensions to eBusiness OA Framework pages, you must use the version of JDeveloper shipped by the eBusiness product team.". To amend my question, would this mean that I could use JDev 10g for BPEL development in 11i and stick to the particular JDev 9i only when modifying OAF web pages in 11i? Again, I would like to use the latest dev tools where possible.
Thanks again.

Get started with file and font sync

Similar Messages

Maybe you are looking for