Get the active cell in a table on a mouse click, so I can change its color

Hi guys,
I am looking at a small application.
I  have a table. When a user clicks on a particular cell, I need the cell coordinates so that I can change its attributes (e.g. color change) by clicking a button.
Edit position property of the table gives me the current cell coordinates, but when I click on a button, the previously clicked cell position is lost. How can I fix this problem?
Is there a way to solve this problem?
Thanks
Ravi
Solved!
Go to Solution.

rpula wrote:
Thanks for the reply. But, Iam trying to avoid using event structures for someother reason in my code. Is there a way, this could be done without event structures.
Please look at the code attached. Whenever the value in the table goes beyond 100, i want to click on the corresponding cell and then suspend it by using the suspend button, in which case the backgroud color should change to red.
Thanks
Saverio's suggestion to use an event structure is a good one so rather than exploring less efficient methods, could you please explain why you are avoiding teh use of an event structure? This will help us help you.
Just trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • Trying to subscribe to a secure podcast, but I am never prompted for login information, instead I just get the gray "i". Is there something in iTunes 10.4 i can change to fix this?

    Trying to subscribe to a secure podcast, but I am never prompted for login information, instead I just get the gray "i". Is there something in iTunes 10.4 i can change to fix this?
    Notes: The RSS feed of the podcast works just fine. When I enter the podcast URL into the firefox bar, I am prompted and am able to access the page. The problem is with iTunes not giving me the prompt.

    Mountain Lion Supported Machines
    Supported
    Models
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Requirements
    General Requirements
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.

  • Is tabbing through all the active cells of a table possible?

    hi...
    i need to tab through the active cells which are already not seen on the table. i mean i can only tab through the cells which i see, i need to use the horizontal scrollbar to move to the cells which are not already seen.
    can i programmatically change this behaviour?
    i used the example program below to disable a part of the table.
    http://zone.ni.com/devzone/cda/epd/p/id/2163
    then i noticed this behaviour. hope its the same with arrays also.
    please reply with your valuable suggestions
    thanks in advance
    Renn 
    Kudos always welcome for helpful posts

    Please hav a look at the VI
    Kudos always welcome for helpful posts
    Attachments:
    disabletablecells_test.vi ‏74 KB

  • How can i get the list of DB02's Table spaces-overview?

    Dear Experts,
           Could you help me about how can i get the list of DB02's Table spaces-overview? which function module can do it?
    Thanks a lot

    Hi,
    Execute this FM DB02_ORA_FILL_TD110
    U will get all the details of table spaces in the importing parameter TD110 of that FM.
    Reward if helpful
    Regards
    Vodka.

  • Question(s​) about the Active Cell:Posit​ion property node for a table control

    Hello,
       What determines the Active Cell Position property node for a table control? I have this in my code and I am displaying its value to a front panel indicator. The value displayed is always set to 0,0. The help for the property node say that it is "read -only" so what sets the value of Active Cell Position  for a Table Control?
    Regards,
    Kaspar
    Solved!
    Go to Solution.

    You set the active cell with a property node.  Once you select an active cell, you can do specific things to that cell and that cell alone, things like set the background color.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How to get 2 web items side by side in the same cell in a table

    Hi All,
    I want 2 radio buttons (in the same cell) in a table to be displayed side by side.  It defaults with a "carriage return" and has one on top of the other.
    How to accomplish this?
    Thanks.

    MC.
    Can you insert a two column one row table within the cell you are referring to? Then pop your radio buttons into each column. Should hold it's format then.
    Regards
    Gill

  • I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

    I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

    Hey bill.rizzo2,
    Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Phone number missing on iPad or iPod touch
    If your phone number isn't listed on an iPod touch or iPad, follow these steps:
    1. Update to the latest version of iOS.
    2. Verify that you're using the same Apple ID that you're using on your iPhone.
    3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
        - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
        - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    4. Sign in to your Apple ID with FaceTime and iMessage.
    If your phone number still isn't listed, follow these steps:
    1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
        - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
        - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    2. Sign in to your Apple ID on your iPhone.
    3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
    4. Sign in to your Apple ID on your other iOS devices.
    Thanks,
    Matt M.

  • How to get the activity of a user?

    Hi Experts,
    How can we get the activity of a user i.e. Which transaction a particular user has gone or some activity log on a particular date? Any table, FM or Tcode. I have already checked the STAD and SM20 transactions. Some authorization problem. So anything except these Tcodes would be helpful. Thanks in advance.
    Regards,
    Prashant.

    >
    santhosh kumar wrote:
    > Hi,
    >
    > I guess if it is not updated or traced under STAD means, i.e. related to authorization failures etc.. kind of stuff will be saved at runtime only in the SAP memory.
    >
    > As it is stored in the buffer, can not be traced in any of the transaction.
    > You should request the user to save and send the screen shot of the SU53 of the user whenever he gets some authorization issue.
    >
    > Based on that, by looking into the SUIM transaction, it can be known whether he is authorized or not, which roles have been assigned etc.. kind of details.
    >
    > Regards,
    > Santhosh.
    Hi Santosh,
    Actually I am doing a root cause analysis for which I need to know whether a particular user has used a particular TCode. I guess the STAD will display only the current data, is there a TCode to display historical data related to user accessing a particular data. Note: I don't have basis authorization.
    Regards,
    Prashant

  • How to get the data from a cluster table to BW

    Dear All,
    I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
    Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
    In SE11 Transaction the Cluster (table ZES) is showing invalid table.
    I referred some Forums, but no use.
    Can any body tell me procedure to get the data from a cluster (table ZES) ?
    Waiting for you results.
    Thanks and regards
    Rajesh

    HI Siggi,
    Thank you for your reply..
    I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
    How can I use the Fields from the that table.?
    What can I do now, can you please explain me about this point.
    Waiting for your reply.
    Thanks and Regards
    Rajesh
    Message was edited by:
            rajesh

  • How do I get the activity window in safari 6.0.2?

    How do I get the activity window in safari 6.0.2?

    Safari 6
    Activity Window is no more available in Safari 6.
    Apple removed that feature.
    Best.

  • How to get the Last cell in HSSFCell (Excel sheet)

    Hello
    I am trying to convert an excel sheet to a tab limited file.
    I am using HSSF and unable to track how do i know if the cell encountered is a last filled cell in excel sheet
    Some of the cells in the sheet can be blank. In that case i am just using inputting a '\t' for that cell and read the next one. But coz of this when i get the last cell, a tab is included for that too.
    Can someone let me know how can i rectify this?
    it seems like HSSFCell does not have any methos like lastCell or so
    Thanx

    then use getLastCellNum() in org.apache.poi.hssf.usermodel.HSSFRow

  • BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups

    Dear all 
            In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message: 
           " Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
          Anyone has encountered similar issue?
       BO version: BO XI 3.1 SP5
       Authenticate: Windows AD
    Thanks and Regards

    Please get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
    Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
    http://service.sap.com/sap/support/notes/1323391
    http://service.sap.com/sap/support/notes/1199995
    -Ambarish-

  • I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I've gotten a little further on this. The dynamic select is
    working fine. It's the "a href" code that isn't. I'm wondering if
    someone can look at this line and tell me if it's okay to build the
    query string this way. The storeid comes through fine but I'm still
    not getting the employeeid value to pass. Here's line that's not
    working:
    td><a href="registerStoreCust.php?storeid=<?php echo
    $row_storeRS['storeid']; echo "&employeeid="; echo
    $_GET['employeeLM']; ?>">Register
    Customer</a></td>

  • I am trying to install MS Office for Apple, no to get the activation code for it you have to go through windows live , now I tried to sign in and been so long I forgot my password, so I tried to rest it the way they say to and keep getting invalid id and

    I am trying to install MS Office.man 2011 and when I get prompted to go get the activation code on line I have to log on with my windows live id. I had one when I had a pc and have since forgot my password so I enter my live id and goto the rest password screen, when I fill out the way they want I get an error message that says my live id is invalid, so I tried to start a new account and I use my email like they say and I get, that email already has a account and to try resting my password. anyone else have this issue?

    Since your question is related to Microsoft products, I suggest you post your question on their own forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • How to get the selected cell in a Matrix.

    Hi all,
    Does any one know how to get the selected cell in a Matrix. Please help to answer. Thanks in advance.
    Regards,
    Thanh Tran

    Hi,
    You can get the value of every cell  using UI API but using datasources is a better aproach.
    Using UI API you need to know the event you want to catch. Example: Catching click event in itemcode column and getting the value (C#):Ki
          if ((pVal.EventType == BoEventTypes.et_CLICK) &&  //CLICK EVENT
              (pVal.ItemUID == "38")  &&                                       //MATRIX-> ITEM 38
              (pVal.ColUID == "1") &&                                           //ITEMCODE COLUMN
              (!pVal.InnerEvent) &&                                
              (!pVal.BeforeAction))
                    Form form = null;
                    try
                        form = kernel.Application.Forms.Item(pVal.FormUID);
                        form.Freeze(true);
                        Matrix mtx = (form.Items.Item(pVal.ItemUID).Specific as Matrix);  //MATRIX OBJECT
                        string itemCode = (mtx.Columns.Item("1").Cells.Item(pVal.Row).Specific as EditText).Value.Trim();  //itemcode = VALUE OF CELL. COLUMN "1": ITEMCODE COLUMN. CURRENT ROW: pVal.Row
                    catch (Exception ex)
                        kernel.Application.MessageBox("Error " + ex.Message, 0, "", "", "");
                    finally
                         if (form != null)
                            form.Freeze(false);
    Kind regards,
    Nauzet Díaz

Maybe you are looking for