Get the functional location assigments to a class

I need a function module to get the assignments to a class . ie the functional locations assigned to a class

Please elabrote the question once.
My understanding is you need a function module to get the functional locationfrom the connection object.
If it is wrong let me know i will try to help you.
Regards,
Siva

Similar Messages

How to get the function name in controller class

Hi experts ,
I am new to the OAF framework.
i have created the two functions and bot he the function have the same controller class .i want to capture the function name or function id in the controller class.
can you please let me know how to get the function id or function name in the controller class.

Hi apurba,
Thanks for the quick reply.
i am trying to get the function name from the FunctionSecurity class,
However in FunctionSecurity class there is no such method defined as getFunctionName();
my requirement is ,i have two functions functionA and functionB defined.
both the function has the same controller class.in controller class ,i need to get the function name ,based on the function name
i will redirect the page to respective page.
looking forward for you response.
appreciate your help
Thanks,
KT

TS1717 I get the error "unable to load data class info from sync services" and eventually itunes freezes-will anything in this article help?

I get the error "unable to load data class info from sync services" and eventully itunes freezes. will this article help me?

Hello there brigidfromca.
Messages can always be pretty daunting when we're not sure where to start. I was able to locate the following Knowledge Base article that discusses the very message you're getting:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
It is a pretty thorough document with multiple steps to review, but looks to be great place to start for a resolution for you.
Thanks for using Apple Support Communities to reach out to us for answers.
Cheers,
Pedro D.

Table Link between the Functional Location and work order

Hi Gurus,
I am stuck in a big problem and have to find a way to list down the work order with a specific user status in the system. I am trying to link it based on the functional location as the inputs will have to be functional location and the date. Can any one guide me with the tables to link these two???
Thanks in advance
Anoop

Hi,
Depending on your exact requirement, you might be able to select from view VIAUFKST_IFLOS. This would allow selection based on order, functional location and various dates. The field IPHAS will give you some system status information - value will indicate which status the order has reached. Example value = 3 indicates order is technically completed.
To get the exact system status (or user status) you need to read the JEST table. Read this table by OBJNR. The object number will have the format OR005000123456 (where 5000123456 is the order number). It will be available in the order tables.
Status values in JEST are in the internal format - example I0002 = REL. Check transaction BS23 to see the link. User status values will have the format E0002. If INACT flag is set in a jest record then that status value is not active. If you want to check for a specific status value then call function STATUS_READ.
-Paul

Reference object structure list iam getting only functional location no

Dears
There is one query from our client that in reference object structure list he is getting only functional location no and not functional location description.i asked him to go to menu settings field selection -functional location and from the choose list ask him to select functional location description .But still he couldn't get the required one. Can any body tell me the reason.

Hi,
You can achieve it from OIAJ tcode and set the required setting for your field IFLO-PLTXT.
Regards,
Keerthi

How do I get the function browser to appear when I types an = sign in a cell-The fn browser was working OK and then quit appearing---

How do I get the function browser to appear when I type an = sign in a cell-The fn browser was working OK and then quit appearing---

I just stumbled onto the answer---The format sidebar must be selected before the function sidebar will appear--Did not see this in the help section--maybe just overlooked it--

How to get the profile object in simple java class (Property accessor)

Hi All,
Please guide me how to get the profile object in simple java class (Property accessor) which is extending the RepositoryPropertyDescriptor.
I have one requirement where i need the profile object i.e i have store id which is tied to profile .so i need the profile object in the property accessor of the SKU item descriptor property, which is extending RepositoryPropertyDescriptor.
a.I dont have request object also to do request.resolvename.
b.It is not a component to create setter and getter.It is simple java class which is extending the RepositoryPropertyDescriptor.
Advance Thanks.

Iam afraid you might run into synchronization issues with it. You are trying to get/set value of property of a sku repository item that is shared across various profiles.
Say one profile A called setPropertyValue("propertyName", value).Now another profile B accesses
getPropertyValue() {
super.getPropertyValue() // Chance of getting value set by Profile A.
// Perform logic
There is a chance that profile B getting the value set by Profile A and hence inconsistency.
How about doing this way??
Create PropertyDescriptor in Profile (i.e user item descriptor), pass the attribute CustomCatalogTools in userProfile.xml to that property.
<attribute name="catalogTools" value="atg.commerce.catalog.CustomCatalogTools"/>
getPropertyValue()
//You have Profile item descriptor and also storeId property value.
// Use CustomCatalogTools.findSku();
// Use storeId, profile repository item, sku repository item to perform the logic
Here user itemdescriptor getPropertyValue/setPropertyValue is always called by same profile and there is consistency.
-karthik

How to get the function name/ID of the current page

HI,
I searched the forum and google, but it is not clear on how to get the function name of the current page.
I have 4 functions in my self service A ,B,C,D (seeded page links ) they all have to go to a page called hhhPG. Based on which function user is clicks I have to show the data in hhhPG.
so my question is how to get the function name ? I mean I need to know if user click on link A , B, C or D link and came to this page.
I found below in one forum and also there is getfunctionID in pageContext , but I do not know what to pass to getfunctionid("???") to get value.
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
Or is there a better way of know where user is coming from ? like geturl....
Please help, I need this ASAP.
Thank you.

Use below to find out how the user came into the page
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
boolean isFunc1 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME1"));
boolean isFunc2 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME2"));
boolean isFunc3 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME3"));
boolean isFunc4 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME4"));
So one of them will be true based on the function the user came in.
Write your logic based on these flags.
Regards,
Peddi.

User status with reference to characteristic value of the Functional locati

Hi,
For a Functional location for which a characeteristic values is maintained as"1",i want "user status of the mainteance order,when created to be updated as "XXX".Can any one of you tell me the user exit and code changes for this.Please reply at the earliest.
EX:A functional location(XXXX) has a Characteristic(xxx) has value as "1"
we have created an user status as"xxx" for the order(through status profie).Now,My requirement is
When i have created a maintenance order for the functional location(XXXX),upon on saving of the order,or Assigning the priority for the maintenance order,i want the user status has to be modified as "XXX".
Could you please tell us what to do?
is our requirement will be fulfilled with the exit"IWO10009".If so,please tell us the code to be made>
Can we map our requirement through "Object dependencies" or any other means to meet our requirement
you will be highly appreciated
with regards,
Joshita

HI joshita,
I had a similar issue in the past where i wanted to attach permit to an order based on some characteristic of functional location at user exit 'IWO10002 - Customer check for order release'.
This will solve your purpose during release of the order.
You can also use the exit 'IWO10009 - Customer Check for 'Save' Event', this will check irrespective of the status of the order.
Regards,
Deepak

How to get the current location text in JTextPane

hi
i want to get the current location text in JTextPane ...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can get current Locatin data ...
pls help me

If I understood your request, what you would like to do is to be able to retrieve Start and End Positions of a given line (a line and NOT the whole content of the JTextPane).
JTextPane is a graphical component that is bound to a logical document. Documents are structured in elements. What defines an element is up to you to decide if you extend your own document but elements are by default paragraphs (runs of text ended by a carriage return '\n' character). So, I think that what you want to do is to retrieve the Start and End positions of the
paragraph over which the caret is currently positionned. Then I think you have got to do the following :
int intStartPos;
int intEndPos;
int intCaretPos;
javax.swing.text.StyledDocument docStyledDoc;
javax.wing.text.Element eleParagraph;
intCaretPos = jtpMain.getCaretPosition( );
//Get a reference to the default styled document bound to the JTextPane component
docStyledDoc = jtpMain.getStyledDocument( );
//Get the paragraph element from the document over which the caret is positionned
eleParagraph = docStyledDoc.getParagraphElement(intCaretPos);
//Get paragraph's offsets
intStartPos = eleParagraph.getStartOffset( );
intEndPos = eleParagraph.getEndOffset( );
hi
i want to get the current location text in JTextPane
...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i
want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can
get current Locatin data ...
pls help me

Problem in getting the function template object from the repository.

Hi all,
I have created a par file. I have a JCO connection in that. I am facing problems in getting the function template object from the repository. This thing is running successfully when i try to deploy it in Tomcat. But i am facing problems when i try to deploy it in SAP EP 6.0.
Below is statement which is giving error after being deployed to SAP EP6.
This is executing fine when executed in Tomcat Server.
// getting the object of function template
IFunctionTemplate functionTemplate =
aRepository.getFunctionTemplate("YADDNEWUSER");
Note : YADDNEWUSER is the name of the RFC which I am calling from my JAVA Code.
Thanks in advance,
Divija

This sounds like a bug in the smart upload code. I have used this stuff before, but it's probably an older version, so maybe they broke something. Enumerations aren't usually guaranteed to keep things in any particular order. I would say for now, make a method to take the enumeration and a param name to find the value. And write to the JSPSmart people.

Classification overview Data for the functional location in Emigall

Hi,
I am trying to upload the functional location for the connection object. and during that i would like to upload the Classification data through Emigall
Can i do that in emigall and do we have a function module or a BAPI for it.to do that.
Can anybody help me on this.
Thank you in advance.
Regards,
Robert

i don't think you can directly upload classification along with your functional location data in EMIGALL. But there is an object OBJCLS_D in EMIGALL that you can probably use. There is a BAPI BAPI_OBJCL_CREATE that may also be useful if you want to write your own program.

Displaying the function location no. in task bar

Hi All,
Please help me in displaying the function location no. in task bar as message.
Following is the code I am using :-
CALL FUNCTION 'ENQUEUE_EZIFLO'
    EXPORTING
        MODE_IFLOT     = 'E'
        MANDT          = SY-MANDT
         TPLNR          = IFLOT-TPLNR
        X_TPLNR        = ' '
        _SCOPE         = '2'
        _WAIT          = ' '
        _COLLECT       = ' '
   EXCEPTIONS
         FOREIGN_LOCK   = 1
         SYSTEM_FAILURE = 2
         OTHERS         = 3
IF sy-subrc <> 0.
write : IFLOT-TPLNR.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH IFLOT-TPLNR.
ENDIF.
Thanks
Gautam

Hi Gautum,
keep the message type as 'S' it will show the message in the task bar,,
MESSAGE ID SY-MSGID TYPE SY-MSGTY   "Pass it as 'S"
NUMBER SY-MSGNO
        WITH IFLOT-TPLNR.
Regards,
Prabhudas

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I thought yes, more like this on the right says no. Why not take the two devices outside and try.

My iPhone getting stolen,how I get the actual location my iPhone way using the apps find my iPhone?

My iPhone getting stolen,how I get the actual location the full address to find my iPhone way using the apps find my iPhone?

If you set up the Find My iPhone service prior to your iPhone going missing - the app is for tracking a device from another iOS device - then there is a chance that can be tracked, though it depends on a number of factors (the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored). Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to pay for it.
If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit. Contact the police and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards.

Get the functional location assigments to a class

Similar Messages

Maybe you are looking for