Classification overview Data for the functional location in Emigall

Hi,
I am trying to upload the functional location for the connection object. and during that i would like to upload the Classification data through Emigall
Can i do that in emigall and do we have a function module or a BAPI for it.to do that.
Can anybody help me on this.
Thank you in advance.
Regards,
Robert

i don't think you can directly upload classification along with your functional location data in EMIGALL. But there is an object OBJCLS_D in EMIGALL that you can probably use. There is a BAPI BAPI_OBJCL_CREATE that may also be useful if you want to write your own program.

Similar Messages

Test data for the ABAP Function

Hello Experts,
Can you please provide me the valid test data for the function modules?
    /SCA/BIF_WORKINPROCESS_BO
                       and
    /SCA/BIF_WORKORDINF_MS
Thanks and Regards,
Kuldeep Verma

Hi ,
If u want to use the same data to test your function module then we can use this button. To use this button simply press F8 --> give the test data --> And then save this test in the test directory using the SAVE button.
--> Next time when retest it then their is no need to give all the other information just press Test Data directory..
Hope you understand.
Kuldeep

User status with reference to characteristic value of the Functional locati

Hi,
For a Functional location for which a characeteristic values is maintained as"1",i want "user status of the mainteance order,when created to be updated as "XXX".Can any one of you tell me the user exit and code changes for this.Please reply at the earliest.
EX:A functional location(XXXX) has a Characteristic(xxx) has value as "1"
we have created an user status as"xxx" for the order(through status profie).Now,My requirement is
When i have created a maintenance order for the functional location(XXXX),upon on saving of the order,or Assigning the priority for the maintenance order,i want the user status has to be modified as "XXX".
Could you please tell us what to do?
is our requirement will be fulfilled with the exit"IWO10009".If so,please tell us the code to be made>
Can we map our requirement through "Object dependencies" or any other means to meet our requirement
you will be highly appreciated
with regards,
Joshita

HI joshita,
I had a similar issue in the past where i wanted to attach permit to an order based on some characteristic of functional location at user exit 'IWO10002 - Customer check for order release'.
This will solve your purpose during release of the order.
You can also use the exit 'IWO10009 - Customer Check for 'Save' Event', this will check irrespective of the status of the order.
Regards,
Deepak

Function module to determine the date for the nth weekday of the mth month

Hey folks,
Is there a function module which determines the date for the mth weekday of the nth month in the pth year.
For instance, if I input 2nd thursday of the 4th month in 2008, it should return me, 04/10/2008 (MM/DD/YYYY).
Thanks and Best Regards,
Puja.

Hi Ravi,
Hadn't been able to work on this lately...You solution was quite close, but did not work for a few scenarios....I tweaked the logic a bit to take care of them as well...
So here goes the code:
================================================
DATA first_day_of_month TYPE datum.
DATA day TYPE p.
CONCATENATE year month '01' INTO first_day_of_month.
CALL FUNCTION 'DAY_IN_WEEK'
    EXPORTING
      datum = first_day_of_month
    IMPORTING
      wotnr = day.
DATA day_number TYPE numc2.
IF day = weekday.
    IF recur = 1.
      DATA ls_date(10) TYPE c.
      CONCATENATE month '/01/' year INTO ls_date.
      CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
        EXPORTING
          date_external                  = ls_date
       IMPORTING
         date_internal                  = date.
    ELSE.
      day_number = ( ( recur - 1 ) * 7 ) + 1.
    ENDIF.
ELSEIF day < weekday.
    day_number = ( ( recur - 1 ) * 7 ) + ( weekday - day ) + 1.
ELSE.
    day_number = ( ( recur - 1 ) * 7 ) + ( 7 - day ) + weekday + 1.
ENDIF.
IF date IS INITIAL.
    CONCATENATE year month day_number INTO date.
ENDIF.
====================================
There still could be some loopholes in this....am not sure....but it sure did seem to work for a couple of random checks that I performed.
Brownie points to you for giving me a direction.
Thanks,
Puja.

What is hierarchical data transfer in functional location

hai,
i want to know indetail about hierarchical data transfer and horizontal data transfer in functional location.
can any one help me in this regard....
plz give information with some example if you dont mind...
thanks in advance
regards
gunnu.

Hi
From SAP HELP
Hierarchical Data Transfer
Definition
You can maintain data at a high level within a hierarchical object structure. The system will automatically transfer the data changes to the levels below that are affected.
The maintenance planner group is changed for the clarification plant described in Functional Location. The employee responsible for maintaining the master data makes the change to the master record of the highest functional location C1 and saves the changes. The system automatically makes the same change for all affected functional locations below the functional location C1, and issues a message to inform the employee of these changes.
Horizontal Data Transfer
Definition
With horizontal data transfer you can differentiate between:
Data transfer from reference location to functional location
Data transfer from functional location to installed piece of equipment
The ABC indicator of the functional location C1-B02-1 "Ventilator" is to be changed for several clarification plants.
The employee responsible for maintaining the master data makes the change in the master record of the reference functional location and saves the entries.
The system automatically makes the same change for all affected functional locations that were assigned to this reference location and for the pieces of equipment that are installed at these locations. The system then issues a message informing the employee of the changes.
Regards
thyagarajan

Table Link between the Functional Location and work order

Hi Gurus,
I am stuck in a big problem and have to find a way to list down the work order with a specific user status in the system. I am trying to link it based on the functional location as the inputs will have to be functional location and the date. Can any one guide me with the tables to link these two???
Thanks in advance
Anoop

Hi,
Depending on your exact requirement, you might be able to select from view VIAUFKST_IFLOS. This would allow selection based on order, functional location and various dates. The field IPHAS will give you some system status information - value will indicate which status the order has reached. Example value = 3 indicates order is technically completed.
To get the exact system status (or user status) you need to read the JEST table. Read this table by OBJNR. The object number will have the format OR005000123456 (where 5000123456 is the order number). It will be available in the order tables.
Status values in JEST are in the internal format - example I0002 = REL. Check transaction BS23 to see the link. User status values will have the format E0002. If INACT flag is set in a jest record then that status value is not active. If you want to check for a specific status value then call function STATUS_READ.
-Paul

Create, Update and Delete Partner functions for a Functional location.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

Alternative Label for a Functional Location

Dear PM Experts,
Can you explain about the Role of Alternative Label for a Functional Location.How to be created and how can you make use of this termu201D Alternative Label for a Functionalu201Din PM Module
RC

Dear Raju,
You can same FLOC by different name. Eg. K1 is a FLOC and you can activate alternative labelling for it and name it as G1.
Must: Activation of alternative labelling in customizinf for this setting
Procedure: IL02>Extras>Alternative Labels>Overview>Pen mark (change Label)...here you can give you name of FLOC and now you can this FLOC by both name in IL02
Regards,
Kaushal Rai
Edited by: Kaushal Rai on Oct 15, 2008 1:22 PM

Help - Class name and descriptions for a function location.

Hi Guys
i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
please help.
many thanks.
seelan.

sadiepu1 wrote:
When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
Did you use facebook to log in?
Verizon will not be able to help you retrieve any of the information you need. You will have to contact Zynga.

Unable to see the data for the hierarchy in rsa3

Hi Gurus,
i am trying to check the data for the standard hierarchy in rsa3,but it is showing an error message saying that error 6 in functional module rss_program_generate.Please help me out.
thanks
bhaskar

Check if this helps seemed relevant
Error 6 in function module RSS_PROGRAM_GENERATE
Error 6 in function module RSS_PROGRAM_GENERATE
error Error 6 in function module RSS_PROGRAM_GENERATE

Required to get class Charateristics and values for an functional location

Hi ,
   As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
Regards
Arun T

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

I recently transferred my ITunes library to an external hard drive. I made sure to copy all the data from the saved location. After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.

I recently transferred my ITunes library to an external hard drive. I made sure to copy all the data from the saved location. After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing. Is there any way to recover the data? Thanks for any help.

I may have found an answer here:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
Message was edited by: williamson42
Message was edited by: williamson42

Duplicate ILOAN for unassigned Functional Location

Hi,
We have a peculiar problem: Two ILOANs ( Location & account assignment for technical object) are created by the system for the same equipment - one for the assigned Functional Location and the other for Unassigned Functional Location. When we have assigned a functional location to the euipment, why is the ssytem creating ILOAN for the same equipment with unassigned functional location ? How can this be rectified ? We don't want ILOAN for the unassigned location as it is affecting the reporting.
Thanks in advance,
Rgds,
Sheeja

Hello,
The system is creating the same equipment only because during the equipment creation from IBIP the system does not find the superior location to which the equipment is assigned(directly to PG or FL or .....) so this generates a new equipment number(SAP number).You must be searching the equipment through the legacy number so you are finding the two same legacy equipment with different SAP number.
I would suggest one thing find all the unassigned equipment and create one default FL just like unused FL and assign all the equipment to it.
Now your reporting will not be affected. DO you have any other issue ???

How to add Test data for a function module

Hi experts,
i want to add test data for a function module . i don't know how to proceed on it . please help me...
with regards,
James...
Valuable answers will be rewarded...

Hi,
- Go to SE37 and execute your FM
- Enter the data you want to pass to FM
- Hit 'Save' button. Enter the meaningful name for your test scenario and save. That's it you have saved the test data.
You can also enter some other test data and save that also. In short, you can save multiple test scenario. Also, you can give multiple test scenario a same name and they do not overwrite each other ( but normally you give different name to differentiate them)
Next time you come to execute the FM again, hit the "test data" button and it will show you all the test scenario you have stored before. Select the one you want to use and it will load the data in FM parameters.
Let me know if you need any other information.
Regards,
RS

ALE/IDOC:The group data for the material CS94163AOOO is locked by ECPUSER

Dear All,
I have extended the idoc for MATMAS and getting -The group data for the material CS94163AOOO is locked by ECPUSER
error on receving ( production ) server.I have written BDC in Z-function module to upload the data for extended segments after calling IDOC_INPUT_MATMAS01 function module.
When the same scenario executed in development server the material is not getting locked and idoc is posted successfully.
Please guide to resolve the error.
Thanks,
Sanjay Deshpande.
Edited by: sanjay_123 on Nov 1, 2009 4:41 PM

Hello,
Can you pls try to use ENQUEUE_E_TABLE or FM specific to lock/unlock MARA table during Idoc creation.
and put some WAIT statement before creation.
CALL FUNCTION 'ENQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '2'
*_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Then write code for creation of MARA
Unlcok now like this
CALL FUNCTION 'DEQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '3'
_SYNCHRON = ' '
_COLLECT = ' '
~Pramod
Edited by: PKUPADHYAY on Nov 1, 2009 5:40 PM

Classification overview Data for the functional location in Emigall

Similar Messages

Maybe you are looking for