Get the Pay Period from PNP

Hello,
May I know how can I get a particular period in the format of yyyy/pp (y=year and p= pay period ID) from the PNP? Thanks a lot!
Regards,
Anyi

try this..
data: w_period(7).
start-of-selection.
concatenate pn-pabrj pn-pabrp into w_period separated by '/'.
~Suresh

Similar Messages

  • How to get the split period wage type amount in payslip?

    How to get the split period wage type amount in payslip?
    Payroll period for 01.01.09 to 31.01.09.
    1.     Employee is active from 1.1.09 to 10.01.09
    2.     Employee is inactive from 11.01.09 to 20.01.09
    3.     Employee is again active from 21.01.09 to 31.01.09
    In Result Table three split periods are created.
    From 01.01.09 to 10.01.09 u2018Basic Salaryu2019 Wtype  1101 amt is 20.00
    From 11.01.09 to 20.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 00.00
    From 21.01.09 to 31.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 10.00
    My requirement is to print only the last split period in payslip from 21.01.09 to 31.01.09. May you please help me in this regard.
    Thanks in advance
    Regards,
    Rajesh.

    Hi
    Try to read the below:
    WPBPC : Distribute Lump Sum Wage Elements to WPBP Periods
      Object
        Operation
      Use
        Operation WPBPC distributes the amount of the current wage type to the
        active WPBP periods in the payroll period.
      Input
        The current wage type in the header entry of table OT is used as input
        for this operation.
      Procedure
        Within payroll, wage types are assigned to a fixed WPBP period by
        infotype 0014 Recurring Payments/Deductions, for example. However, you
        may want to distribute this payment to all active WPBP periods, which is
        what would happen if the wage type were entered in basic pay. Therefore,
        various specifications exist for parameter S:
        o   If the specification is 'A', and if several active WPBP periods
            exist, the amount is simultaneously reduced on a calendar-day basis.
        o   If the specification is 'D', the wage type is distributed to all
            existing WPBP periods without the amount being reduced.
        o   If the specification is 'S', and if the validity period starts or
            ends during the period, the entry in table WPBP is split using this
            date. The wage type is stored in table OT for the corresponding WPBP
            period.
            This parameter is only allowed if processing was accessed using
           function P0014.
           In this case, infotype 0014 must be processed before absence
           valuation and function PARTT. Otherwise, rejections occur during
           payroll processing.
       o   Specification 'X' is the combination of 'A' and 'S'.
           This parameter is only allowed if processing was accessed using
           function P0014.
       o   If the specification is 'W', and if the validity period starts or
           ends during the period, the entry in table WPBP is split using this
           date (as with option 'S'). Unlike 'S', the wage type is not stored
           in table OT.
           This parameter is only allowed if processing was accessed using
           function P0014.
       o   If the specification is ' ', the wage type is stored in table OT for
           each WPBP period in which the validity interval fits.
           This parameter is only allowed if processing was accessed using
           functions P0014 or P0015.
       If the WPBP split is set for a wage type, the wage type is stored
       without changes in table OT. If you specify a different wage type name
       in the second parameter, the wage type is stored with this name in table
       OT. Before you execute operation WPBPC, you may therefore need to delete
       the split using operation ELIMI.
       If a country-specific split (C1, C2, or C3 split) is set, the operation
       interprets it as an error. The employee in question is rejected by
       payroll. All other splits are transferred as they are.
      Output
        The processed wage type, or the wage type specified in the operation
        call, is written to table OT (output table) with the appropriate split
        indicator and reduced amount as operation output for each WPBP period.
        Parameter specification 'W' is the only exception.
      Syntax
        OOOOOSVVVV
        OOOOO       WPBPC       Operation name
        S
                    blank       distribute to all WPBP periods
                    S           split and distribute WPBP
                    W           split but do not distribute WPBP
                    A           distribute to active WPBP periods
                                with calendar-day reductions
                    D           distribute to all existing
                                WPBP periods
                    X           combination of 'S' and 'A'
        VVVV                    Results wage type
                    blank       input wage type = results wage type
                    wage        wage type name of input wage type is replaced
                     type       by wage type name of results wage
                     name       type
        Wage type before operation:
      Example
        M100        02          3000
        WPBP split
        01  June 01 - June 20 active
        02  June 21 - June 30 active
        VVVV                    Results wage type
                    blank       input wage type = results wage type
                    wage        wage type name of input wage type is replaced
                     type       by wage type name of results wage
                     name       type
        Wage type before operation:
      Example
        M100        02          3000
        WPBP split
        01  June 01 - June 20 active
        02  June 21 - June 30 active
        Wage type before operation:
        WType       WPBP        Amount
        M100        00          3000.-
        M200        02          2000.-
        Operation:   WPBPCA
        Wage type after operation:
        WType       WPBP        Amount
        M100        01          2000.-
        M100        02          1000.-
        M200        02          2000.-
        Operation:   WPBPC
        Wage type after operation:
        WType       WPBP        Amount
        M100        01          3000.-
        M100        02          3000.-
        M200        02          2000.-
    Regards
    Team Member.

  • How can i get the all values from the Property file to Hashtable?

    how can i get the all values from the Property file to Hashtable?
    ok,consider my property file name is pro.PROPERTIES
    and it contain
    8326=sun developer
    4306=sun java developer
    3943=java developer
    how can i get the all keys & values from the pro.PROPERTIES to hashtable
    plz help guys..............

    The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
    InputStream is = new FileInputStream("tivoli.properties");
    props.load(is);

  • Is there a way to get the voice memos from my iPhone on to my pc?

    Is there a way to get the voice memos from my iPhone on to my pc?

    See http://www.tech-recipes.com/rx/6403/iphone-transfer-voice-memos-from-iphone-to-c omputer/.

  • How to get the return values from a web page

    Hi all :
       how to get the return values from a web page ?  I mean how pass values betwen webflow and web page ?
    thank you very much
    Edited by: jingying Sony on Apr 15, 2010 6:15 AM
    Edited by: jingying Sony on Apr 15, 2010 6:18 AM

    Hi,
    What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
    Regards,
    Karri

  • How can I get the "text" field from the actionEvent.getSource() ?

    I have some sample code:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.util.ArrayList;
    public class JFrameTester{
         public static void main( String[] args ) {
              JFrame f = new JFrame("JFrame");
              f.setSize( 500, 500 );
              ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
              buttonsArr.add( new JButton( "first" ) );
              buttonsArr.add( new JButton( "second" ) );
              buttonsArr.add( new JButton( "third" ) );
              MyListener myListener = new MyListener();
              ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
              ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
              ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
              JPanel panel = new JPanel();
              panel.add( buttonsArr.get( 0 ) );
              panel.add( buttonsArr.get( 1 ) );
              panel.add( buttonsArr.get( 2 ) );
              f.getContentPane().add( BorderLayout.CENTER, panel );
              f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
              f.setVisible( true );
         public static class MyListener  implements ActionListener{
              public MyListener() {}
              public void actionPerformed( ActionEvent e ) {
                   System.out.println( "hi!! " + e.getSource() );
                   // I need to know a title of the button (which was clicked)...
    }The output of the code is something like this:
    hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
    border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
    flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
    disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
    right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
    rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
    I need this: "first" (from this part: "text=first" of the output above).
    Does anyone know how can I get the "text" field from the e.getSource() ?

    System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
    In a real-world application, no.
    In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
    In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
    All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
    Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

  • How can i get the max rpm from cpu fan??

    how can i get the max rpm from my cpu cooler regarding that i don't have a speed controller attached to the cpu fan ,,, ??  please make things clear for me
    thanks

    if you have not reduced it by using a speed controller either hardware or software or by the 7v mod its already going as fast as it will at 12 v dc you cannot speed it up only slow it down
    need more air get a different cooler/fan

  • How can I get the context-parm from a web.xml file using struts?

    Hello:
    I need get the context-param from the web.xml file of my web project using struts. I want configurate the jdbc datasource connection pooling here. For example:
    <context-param>
    <param-name>datasource</param-name>
    <param-value>jdbc/formacion</param-value>
    <description>Jdbc datasource</description>
    </context-param>
    and then from any Action class get this parameter.
    Similar using a simple server can be:
    /** Initiates new XServlet */
    public void init(ServletConfig config) throws ServletException {
              for (Enumeration e = config.getInitParameterNames(); e.hasMoreElements();) {
                   System.out.println(e.nextElement());
              super.init(config);
              String str = config.getInitParameter("datasource");
              System.out.println(str);
         public void doPost(HttpServletRequest req, HttpServletResponse res)
              throws ServletException, IOException {
              // res.setContentType( );
              System.out.println("Got post request in XServlet");
              PrintWriter out = res.getWriter();
              out.println("nada");
              out.flush();
              out.close();
    but only this works for init-params, if I use
    <servlet>
         <servlet-name>MyServlet</servlet-name>
         <display-name>MyServlet</display-name>
         <servlet-class>myExamples.servlet.MyServlet</servlet-class>
         <init-param>
         <param-name>datasource</param-name>
         <param-value>jdbc/formacion</param-value>
    </init-param>
    </servlet>
    inside my web.xml. I need something similar, but using struts inside the action class for that I can get the context-params and call my database.
    Thank you

    To get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
    ServletContext context = getServlet().getServletContext();
    String tempContextVar =
    context.getInitParameter("<your context param >");

  • How can I get the example fonts from the font file Programmatically?

    Hi Friends,
             I am doing one mac application for the fonts management. Now I would like to Preview the Font in the NSTextView.  This is my coding for the textView.
        NSTextView *text3=[[NSTextView alloc]initWithFrame:NSMakeRect(250,500,450,30)];
        [text3 setString:@"ABCDEFGHIJKLMNOPQRSTUVWXYZ"];
        [text3 setFont:[NSFont fontWithName:@"GangofThree" size:40]];
        [[[self window] contentView] addSubview:text3];
    Because I have set the string in English for the NSTextView I can't able to view the other languages characters.I got the character set of the font file by using this code.
       NSCharacterSet *characterset = (NSCharacterSet *) CTFontCopyCharacterSet (fontRef);
    This Font is greek font.Now My question is how can I able to get the greek characters from this characterset.

    Your text string would certainly have to be in Greek itself, not Latin.  No normal font just translates Latin letters to Greek, they use other codepoints reserved for Greek letters.

  • How can I get the edited pictures from the thumbnails to full size?

    I upgraded to iPhoto 11, the thumbnail photos show my previous edits, but when I click on the photo to make it bigger, it reverts back to the unedited, original picture.  How can I get the edited pictures from the thumbnails to full size?

    Verify you are using iPhoto11 ver 9.5
    if not run the >Software update or check your apps folder and make sure the correct iPhoto is launched,  not an older ver.

  • Not able to get the Qualification data from BAPI

    Hi all,
    I am using a BAPI (BAPI_JOBREQUIRE_GETLIST) to get the qualifiaction data for requirement profile. It's working fine earlier but I did not get the qualification data from this BAPI, although the data is there in DB against this requirement profile.
    Can someone suggest me why I am getting this issue. I have looked into SDN and in BAPI documentation and found as below:
    "You require authorization (structural authorization) to read the Requirements subprofile."
    I am having the same User ID as I had before (when I getting back the correct data), so I don't think it should be authorization issue.
    Can someone help me out in this issue please.
    Thanks,
    Sanket Sethi

    Hi Shiva,
    It does not going to these includes at all. Message comes out with successfully done. The BApi is calling RHPP_COMMON_QUALI_READ inside, but this will not return any data. But if will call any qualification object ID, this BAPI will come up with data.
    So the QP type LO profile will not come up with any kind of data, but if we pass the OTYPE as Q and pass any Qualification object ID then the data will be returned.
    Is there any relationship or some other thing is missing? Any idea.
    Thanks,
    Sanket Sethi

  • Remote Object - not able to get the returned value from java method

         Hi ,
    I am developing one sample flex aplication that connects to the java code and displays the returned value from the
    java method in flex client. Here I am able to invoke the java method but not able to collect the returned value.
    lastResult is giving null .  I am able to see the sysout messages in server console.
    I am using flex 3.2 and blazeds server  and java 1.5
    Here is the code what I have written.
    <?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication  xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundColor="#FFFFFF" initialize="initApp()">
     <mx:Script><![CDATA[
    import mx.controls.Alert; 
    import mx.binding.utils.ChangeWatcher; 
    import mx.rpc.events.ResultEvent; 
    import mx.messaging.*; 
    import mx.messaging.channels.* 
    public function initApp():void { 
         var cs:ChannelSet = new ChannelSet(); 
         var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8400/blazeds/messagebroker/amf");     cs.addChannel(customChannel);
         remoteObj.channelSet = cs;
    public function writeToConsole():void {      remoteObj.writeToConsole(
    "hello from Flash client");
          var returnedVal:String = remoteObj.setName().lastResult;     Alert.show(returnedVal);
    //[Bindable] 
    // private var returnedVal:String; 
    ]]>
    </mx:Script>
    <mx:RemoteObject id="remoteObj" destination="sro" /> 
    <mx:Form width="437" height="281">
     <mx:FormItem>  
    </mx:FormItem>  
    <mx:Button label="Write To Server Console" click="writeToConsole()"/>
     </mx:Form>
     </mx:WindowedApplication>
    Java code
    public  
         public SimpleRemoteObject(){  
              super();     }
      class SimpleRemoteObject { 
         public void writeToConsole(String msg) {          System.out.println("SimpleRemoteObject.write: " + msg);     }
         public String setName(){          System.
    out.println("Name changed in Java"); 
              return "Name changed in Java";
    And I have configured destination in  remote-config.xml
    <destination id="sro">
       <properties>    
        <source>SimpleRemoteObject</source>
        <scope>application</scope>
       </properties>
      </destination>
    Please help me .

    You are not able to get the returned value because if you see the Remote object help you will realise you have to use result="resultfn()" and fault = "faultfn()"
    In this you define what you wish to do.
    More importantly in the remote object you need to define which method you wish to call using the method class like this
    <mx:RemoteObject id="remoteObj" destination="sro" result="r1" fault="f1"  >
         <Method name="javaMethodName" result="r2" fault="f2"/>
    <mx:RemoteObject>
    r2 is the function where you get the result back from java and can use it to send the alert.

  • How can I get the host name from Email address?

    hi
    When I using socket to develope an email-sending servlet,I don't know how to get the host name from emial address.can you help me,thanks

    Stripping off the user name will give you the domain of from field in the message. This is not the same as the host. Take a look at:
    http://www.stopspam.org/email/headers/headers.html
    Theres a pretty good discussion about email headers and how to use the information. You probably want to check the information here against the RFC.
    Sean

  • How can i get the count vaule from GPIB?

    I want to get the count waule from GPIB ,but I find that the vaule I get from GPIB now is the trace vaule ,
    so I ask How can i get it.

    The count of what? What kind of instrument are you using?

  • How can i get the System Time from the other host

    I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
    Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.

    Open a socket to port 13 and read a string with the time.
    -or-
    Open a socket to port 27 and read 4 bytes that are a network order timestamp
    Assuming that your UNIX machine has those services running, most do

Maybe you are looking for