Help css for Tiles and JSF

Hi. In JSFTiles Oracle sample, it has three columns one over the other. But I would like a design be:
HEADER
MENU ----------- BODY
FOOTER
The css could help me but I don´t know css ...
Are there somebody can help me?
Thanks

http://www.456bereastreet.com/lab/developing_with_web_standards/csslayout/2-col/
More css layout info:
http://www.neuroticweb.com/recursos/2-columns-layout/
http://glish.com/css/home.asp
http://www.webreference.com/authoring/style/sheets/layout/advanced/
http://www.bluerobot.com/web/layouts/
http://www.ssi-developer.net/main/templates/
http://realworldstyle.com/2col.html

Similar Messages

Current status of Tiles and JSF integration

Hi. I am new to JSF, and I have been researching Tiles integration with JSF. I've read a lot of posts about difficulties encountered when integrating them, and other posts seem to suggest that it is definitely do-able (some posts say using Shale Tiles is the way to go instead of using Struts tiles.)
I have not found any definitive or straight forward tutorial on integrating Tiles and JSF. Is it a matter of the JSF technology not being fully developed? Will tiles be easily integrated (as it is in Struts) in the future, without jumping through hoops?
Any opinions or advice would be greatly appreciated. I would rather not use JSF w/ JSP includes as an alternative. It seems as though Struts would be a better choice for what I have to do, unless I can integrate JSF and tiles functionality with relative ease.
Thanks.

Cold-Gin wrote:
I have not found any definitive or straight forward tutorial on integrating Tiles and JSF. Is it a matter of the JSF technology not being fully developed? Will tiles be easily integrated (as it is in Struts) in the future, without jumping through hoops?I certainly wouldn't say that JSF technology is not fully developed by any stretch. It's certainly possible that there's some sort of impedance mismatch between the two, but Tiles support is hardly the measure of a framework's maturity. :P
Having said that, I really can't say much more than that with regard to Tiles. What I can suggest, though, is JSFTemplating or Facelets. Both are mature products, engineered specifically for use with JSF. Facelets is probably the more popular of the two and is slated for inclusion in JSF 2.0 in some form, while JSFTemplating, which supports the Facelets syntax, is another strong alternative (which, incidentally, is what powers the GlassFish admin GUI).
Hope that helps...

Help Document for Keyfigures and Characteristics

Hello,
Using BEx Browser I'm generating reports so i need to create help documents for Keyfigues and characteristics that way user will know by looking documentation they will know what is what
How can we create help documentation?
Experts help would be appreciated
Thanks

actually we are using BI7.0 version but we don't have portal and web that is the reason we are using old BEx browser for front end but ETL we are using BI7.0.
so using old BEx browser can we create documentation for keyfigures or not?
if so How?
Thanks

Separate CSS for IE and Firefox

Hi all,
older versions of Robohelp generated to separate CSS files in the Wephelp for IE and Firefox. Evidently this feature was dropped somewhen. However I need it now to resolve some specific Firefox problems in a project.
I thought I could add the corrsponding script in the master page that checks for the browser and selects the CSS, but thought I should ask the forum first.. are any solutions for this already known?
Robert

If you are sure there is no way around OK but sometimes someone knows a solution. I'm not saying I do, just that sometimes someone will pop their head over the parapet with the answer.
It used to be the case that bullets were a pain for me until I found out that Firefox's own CSS had an indent that you could negate without affecting IE. Result, almost the same appearance in both browsers.
I haven't tried it but RoboHelp 10 allows you to write media queries and you can define the browswer. In theory you can have a default style for IE and other browsers but specify a rule that if the browser is Mozilla, the CSS is to be modified.
That's the cheery theory and I don't know the ins and outs of how well it would work in reality. Do let us know if you decide to take the plunge.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Help for Eclipse and JSF

I'm a novice Eclipse user with JSF. I used Oracle JDeveloper. But that seem complex to me. Anyway, I want simple and details tutorial about how to use Eclipse with JSF and some sample projects done with Eclipse using JSF.
I need that urgently. Please help me.

Deja vu?
http://forum.java.sun.com/thread.jspa?threadID=5197488
http://forum.java.sun.com/thread.jspa?threadID=5199156

Hi i am using tiles and jsf?

i am using tiles defnetion.
i want to use the layout logic for my application.
i created all the layouts how can i link the layouts
to the main tiles defnition.
and if i extend the main tiles def i am not able to get the page displayed.
below is my code
les-definitions>
<definition name="mainLayout" path="/layout/mainLayout.jsp" >
<put name="topLayout" value="topLayout" />
<put name="leftLayout" value="leftLayout" />
<put name="centerLayout" value="centerLayout" />
<put name="body" value="" />
<put name="subbody" value=""/>
</definition>
<definition name="topLayout" path="/layout/topLayout.jsp" >
<put name="header" value="/pages/header.jsp" />
<put name="menu" value="/pages/tabMenu.jsp" />
</definition>
<definition name="leftLayout" path="/layout/leftLayout.jsp">
<put name="body" value="/templates/edit1003_body.jsp" />
</definition>
<definition name="centerLayout" path="/layout/centerLayout.jsp">
<put name="subbody" value="/templates/mortage_body.jsp" />
</definition>
<definition name="edit1003.tiles" extends="mainLayout" >
<put name="body" value="/templates/edit1003_body.jsp" />
<put name="subbody" value="/templates/mortage_body.jsp" />
</definition>
<definition name="aboutus.tiles" extends="mainLayout" >
<put name="body" value="/templates/aboutus_body.jsp" />
<put name="subbody" value="/pages/address.html"/>
</definition>
<definition name="mortage.tiles" extends="edit1003.tiles" >
<put name="subbody" value="/templates/mortage_body.jsp" />
</definition>
its not working
please let me know whats the wrong?
thansk in advance
sreedevi.

hi
i got the navigation its works
thansk
but i have one more problem
my jsf tags are not shown in the body tag they are shown outside the body tag.
below is my code
<form id="subbody:hi:_id27" name="subbody:hi:_id27" method="post" action="/actsys/mortage.jsf" enctype="application/x-www-form-urlencoded"><table border="0"><tbody><tr><td><span class="text">Applicants should complete this form as "Borrower" or "Co-Borrower", as applicable.Co-Borrower information must aslo be provided(and the appropriate box checked)</span></td></tr>
<tr><td><table border="0"><tbody><tr><td><input type="checkbox" name="subbody:hi:_id27:_id32" value="true" />the income or assest of a person other than the "Borrower"(including the Borrower's spouse) will be used as a basis for loan qualification.</td><td><input type="checkbox" name="subbody:hi:_id27:_id35" value="true" />the income or assests of the Borrowers's spouse will not be used as a basis for loan qualification,but his or her liabilities must be considered because the borrower resides in a community property state,the security property is located in a community property state,or the Borrower is relying on other property located in a community state as a basis for repaymnet of the loan.</td></tr>
</tbody></table></td></tr>
<tr><td><table border="0" cellpadding="1" cellspacing="2"><tbody><tr><td><span class="text">Mortage applied for:</span></td><td><table id="subbody:hi:_id27:MortageApp"><tr> <td><label><input type="checkbox" name="subbody:hi:_id27:MortageApp" value="va" onblur="validateCheck(this);" /> VA</label></td> <td><label><input type="checkbox" name="subbody:hi:_id27:MortageApp" value="conv" onblur="validateCheck(this);" /> Conventional</label></td> <td><label><input type="checkbox" name="subbody:hi:_id27:MortageApp" value="other" onblur="validateCheck(this);" /> Others</label></td> <td><label><input type="checkbox" name="subbody:hi:_id27:MortageApp" value="fha" onblur="validateCheck(this);" /> FHA</label></td> <td><label><input type="checkbox" name="subbody:hi:_id27:MortageApp" value="usda" onblur="validateCheck(this);" /> USDA/RHS</label></td></tr></table></td><td><span class="text">Agency Case Number:</span></td><td><input id="subbody:hi:_id27:agencycasenumber" name="subbody:hi:_id27:agencycasenumber" type="text" value="" onfocus="validateagency('MortageApp');" onchange="checkNumber(this);" /></td><td><span class="text">Lender Case Number:</span></td><td><input id="subbody:hi:_id27:lendercasenumber" name="subbody:hi:_id27:lendercasenumber" type="text" value="" onchange="checkNumber(this);" /></td></tr>
<tr><td><span class="text">Amount:</span></td><td><input id="subbody:hi:_id27:amount" name="subbody:hi:_id27:amount" type="text" value="" onchange="checkNumber(this);" /></td><td><span class="text">Interest Rate:</span></td><td><input id="subbody:hi:_id27:interestrate" name="subbody:hi:_id27:interestrate" type="text" value="" onchange="checkNumber(this);" /></td><td><span class="text">No. of Months:</span></td><td><input id="subbody:hi:_id27:Noofmonths" name="subbody:hi:_id27:Noofmonths" type="text" value="" onchange="checkNumber(this);" /></td></tr>
<tr><td><span class="text">Authorization Type:</span></td><td><table id="subbody:hi:_id27:Authorization"><tr> <td><label><input type="checkbox" name="subbody:hi:_id27:Authorization" value="fr" onblur="validateCheck(this);" /> Fixed Rate</label></td> <td><label><input type="checkbox" name="subbody:hi:_id27:Authorization" value="other" onblur="validateCheck(this);" /> Other</label></td> <td><label><input type="checkbox" name="subbody:hi:_id27:Authorization" value="gpm" onblur="validateCheck(this);" /> GPM</label></td> <td><label><input type="checkbox" name="subbody:hi:_id27:Authorization" value="arm" onblur="validateCheck(this);" /> ARM</label></td></tr></table></td><td></td><td></td><td></td><td></td></tr>
</tbody></table></td></tr>
</tbody></table><input type="hidden" name="subbody:hi:_id27_SUBMIT" value="1" /></form>
<
<body>
</body>
i want the jsf code need to be inside the body tage
if some one has any idea why its comming
please let me know
thansk in advance

DNS Help: Configure for local and extenal services using same domain name?

Hello all. I'm setting up a 10.5 server, have scoured these great forums and gotten close, but am still stuck. Any help would be greatly appreciated.
My network setup is as follows: Internet (2xT1) > modem > router/firewall/NAT device > XServe > switches > rest of network, clients, etc. Pretty standard, I believe.
I'd like to use this XServe on our local network/intranet/LAN only for OD, networked home directories, AFP, iCal, Time Machine, Print and Software Update.
My website is hosted on an external server.
My email is also hosted on a (different) external server.
Domain is school.edu
XServe name is xserve.school.edu
XServe is 10.0.0.25
I've gone through Apple's recommended DNS setup (supplemented by some great info found here on the forums....), and am able to connect to other Internet sites (with client's DNS server set as 10.0.0.25), but unable to connect to www.school.edu, or send/receive mail to/from mail.school.edu.
In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If anyone out there can shoot me some notes on how to configure the DNS settings, zones, forwarding, etc. to accomplish this, I'd be VERY appreciative.
Thanks, in advance, to anyone who can help me out.
Cheers,
Tim

In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If your server thinks it's authoritative for 'school.edu' then you have to add records for every host in the school.edu zone.
For example, if you want to be able to resolve 'www.school.edu' then you have to have a 'www' record. If you want to send/receive mail you have to add an MX record, and so on.
It doesn't matter that you're not responsible for those servers, it's just that since this machine thinks it 'owns' school.edu it will only respond with records in its own zone and won't care about what any other name server says, even if that other name server is authoritative for the zone.
FWIW, that's often why people running stub servers like this choose a separate subdomain (like 'dept.school.edu') so they can leave the main school.edu records on the main server and have full control over a subdomain.

Career Help Needed for me and my wife..your suggestion would surely help!

Hi Guys,
I would really appreciate if you can solve our mid career Dilemma. Me and my wife both want to get in to SAP..Kindly suggest which module should we pick..
My Wife's Profile: She is an Economics honors graduate and an MBA too. she has got 7 years banking exp in two of the biggest Pvt sector Banks in India. Kindly Suggest which module would be in line with her domain Experience, she wants to get in to the functional side of SAP using the domain knowledge..
My Profile: I am a Science graduate and MCSE, have got 7 yrs exp in Sales and Business Development, should I opt for SD, CRM or HR? Though I am more keen on SD or CRM, but I mentioned HR as I have been doing Business development in staffing industry for the last 4 yrs now..
I am sure I would get the best advise in here..Also, do let us know the future prospects it will/may add..
Look forward to your suggestions..
Thanks!
Rohit
Edited by: Rohitgulati on Feb 7, 2012 9:11 PM

Hi Leon,
Thanks for your quick revert, but just wondering if Banking domain is good for FI/Co, as I guess it has more to do with Finance and not Retail Banking, I in the mean time searched another Module for Banking Industry called IS- Banking..I think, this module will be in line with the Banking Exp but whats the demand of this module in Banking sector that has to be seen!!
Thanks for your help!
Rohit

Help needed for storing and sorting objects.

Hello
I have an assignment and it is to create a guessing game, here is the question,
In this assignment you are to write a game where a user or the computer is to guess a random
number between 1 and 1000. The program should for example read a guess from the keyboard, and
print whether the guess was too high, too low or correct. When the user has guessed the correct
number, the program is to print the number of guesses made.
The project must contain a class called Game, which has only one public method. The method must
be called start(), and, when run it starts the game. The game continues until the user chooses to
quit, either at the end of a game by answering no to the question or by typing 'quit' instead of a
guess. After each game has been played, the program is to ask the user for a name and insert this
together with the number of guesses into a high score list. When a game is started the program
should print the entire high score list, which must be sorted with the least number of guesses first
and the most last. Note, the list must be kept as long as the game-object is alive!
each score also
consists of the game time. In case there are two high scores with the same number of guesses, the
game time should decide which is better. The game time starts when the first guess is entered and
stops when the correct guess has been made. There should also be input checks in the program so
that it is impossible to input something wrong, i.e. it should be impossible to write an non-numeric
value then we are guessing a number, the only allowed answers for a yes/no question is yes or no,
every other input should yield an error message an the question should be printed again.
I understand how to code most of it, except I am not sure how to store the playerName, playerScore, playerTime and then sort that accordingly.
I came across hashmaps, but that wont work as the data values can be the same for score.
Is it only one object of lets say a highScore class, and each time the game finishes, it enters the values into an arrayList, I still dont understand how I can sort the array all at once.
Should it be sorted once for score, then another array created and sorted again, I dont get it I am confused.
Please help clarify this.

Implode wrote:
We had the arrayList/collections lecture today.
I asked the teacher about sorting objects and he started explaining hashmaps and then he mentioned another thing which we will only be learning next term, I'm sure we must only use what we have learned.
How exactly can this be done. I have asked a few questions in the post already.
ThanksWell, there was probably a gap in the communication. Hash maps (or hash tables, etc.) are instance of Map. Those are used to locate a value by its unique key. Generally, to speed up access, you implement a hashing function (this will be explained hopefully in class). Think of name-value pairs that are stored where the name is unique.
Contrast this with items that are sorted. Any List can be sorted because its elements are ordered. An ArrayList is ordered, generally, by the order you inserted the elements. However, any List can be given its own ordering via Comparable or Comparator. You can't do this with an ordinary Map. The purpose of a Map is speedy access to the name-value pairs, not sorting. The List likewise has different purposes, advantages, disadvantages, etc. List can be sorted.
A Map is generally similar to a Set. A Set is a vanilla collection that guarnatees uniqueness of each element (note, not name-value pairs, but simple elements). There is one concrete class of Map that can be sorted, TreeMap, but I doubt your professor was referring to that. The values or the keys can be returned from the Map and sorted separately, but again, I doubt he was referring to that.
Take a look at the Collections tutorial here on this site or Google one. It is fairly straightforward. Just keep in mind that things (generally) break down into Set, Map and List. There are combinations of these and different flavors (e.g., Queue, LinkedHashMap, etc.) But if you can learn how those three differ, you will go a long way towards understanding collections.
(Oh, and be sure to study up on iterators.)
- Saish

Help required for slicing and merging file

Hi,
I am working on p2p downloading application based on Gnutella. Right now i am trying to implement downlaoding one file from many hosts at a time(like limewire does). i am able to connect to multiple host. but dont know how to downlaod and merge file for his purpose.
i know how to download one file from single host. but dont know how to handle file coming from multiple hosts.
if anyone having knowledge, please tell as soon as possble.

Hi.
thanks for the reply. Actually i had something same
in my mind. but unfortunately i am quite week in
serializtion and file stuff. If you could provide me
with code snipet for this, or can just simulate in a
fewer lines of code, it would be a great help for
me...i have too much short time...
i think i really have to study this file
stuff..........You shouldn't use serialization. Just invent a protocol, and "normal" binary data.
Kaj

Help required for sample and Hold

Hello,
I am working on a project Cerebral Oxygenation Monitoring. The concept is similar to pulse oximetry. I help already developed the hardware that includes the timing circuit , led driver for driving Red and IR Led, Amplifier and Filter Stage. I am getting the pulse signal but it is multiplexed signal corresponding to effect of both Red/IR Led. Now to separate it I need to use sample and hold circuit, whihc I can achieve with and IC LF398 but I want to minimise this part and directly take this multiplexed signal through DAQ Card in to LabVIEW and further create sample and hold in LabVIEW.
The sampling needs to be in synchronus with the Timing signal given to Red and IR. How I can achieve this in LabVIEW.
For eg: the Red Led is triggered with a pulse of 1 ms with a repeatation rate after 10 ms. So this timing pulse should trigger the sampling part.
Please Help.

CoastalMaineBird wrote:
Not sure what you need the HOLD part for.
Correct me if I'm wrong:
You have a 1 mSec pulse, every 10 mSec.
Each pulse triggers two LEDs: RED and IR
You have a single signal which contains the processed (through the body, or whatever) responses to BOTH of those signals.
So, how does a S&H, hardware or otherwise, separate the two responses?
Is one delayed in time, relative to the other?
YES you are right, 1 mSec pulse, every 10 mSec.
Above figure shows the trigger pulses generated using standard hardware. One triggers IR and other triggers RED. In above case I had kept repetation rate 4msec
This is the signal which I may get
Now how do I separate both of these signals in LabVIEW

Help Required For DropDownByIndex and Table

Hi All,
   Could anybody help me to solve my problem?
   Actualy I am working with one DropDownByIndex and two
   Tables.Where within one viewset DropDown
   box and one Table(say Table1) are in one view and
   another one table(say Table2) is in other view.
   DropDown box is maped with one attribute suppose
   countryName and and Table1 is maped with collageName
   and locationName. So, when I will select the DropDown
   with one countryName then the table1 will show all the
   available collageName and locationName with multiple
   row.
   In other view I mean the Table2 is bind with
   availableCourse and courseDuration this two
   attributes. So whin I will click one row of Table1
   that means one collegeName is selected then the
   Table2 will show the availableCourse and
   courseDuration for that particular college. When I
   will select next row of Table1 then the value of
   Table2 will be different.
   Could anybody help me by sending the code and
   details?
   With Thanks and Regards
   Sudip

One way is to get lead selected of drop down index , then get lead selected of table1 and pass it via a method to wdDoInit in the 3rd view so that you know what has been clicked in table1 and then accordingly get the data in table2.
Another way you can do this is to map the tables and drop down index to value nodes and create them in the component controller and then map these value nodes to the respective views. Now when your table2 view is triggered you get the lead selected in the value node of the table1 and accordingly generate the table2.

Some help needed for improrting and editing

Hi,
I need a litle help with two issues.
1) I was trying to edit a photo but when i click the edit button, I can see the photo at the top of the screen in the film strip but not in the edit screen and I have also noticed for this particular picture I cannot view it in full zoom. All I can see is an " ! " mark.
2) I deleted this picture and tried to import again but iphoto states that it cannot import because it already exists. I tried closed the program, deleting the cache.

Derek
It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
iPhoto is a database and like any database it needs you to manipulate the data via the app itself, and not via a back door. So, that's why it thinks the pic is still there - because the entry in the database is still there.
The correct way to remove a pic is to move it to the iPhoto trash and empty the iPhoto trash. This will remove the pic from the database and the HD.
Now your database base is bunged up you have two choices: one is to return things precisely the way they were the other is to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Assuming you renamed a file to make it easier to find:
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

Frames, Tiles and JSF

Hi,
I use frames in my web application.
Individual frames are laid out using tiles which basically assemble JSF components.
However I run into
[Exception in:/pages/common/header.jsf] Cannot forward after response has been committed
Is JSF & Frames & Tiles go well together. I depend on frames to give a resizing and scroll bar option to my left had navigation tree.
Any suggestions are welcome.
Thanks
Bala

It cannot work such way, because #{} is a syntax of the JSF EL working only inside the JSF tags. tiles:put is not a JSF tag. If your environment supports JSP 2.0 EL, you can use it
Sergey : jsfTutorials.net

Help needed for Audigy and Audigy 2

Hi, I got a set of Audigy Platinum EX and I have a Audigy 2 ZS. Can I use the external I/o part of Audigy Platinum EX on Audigy 2 ZS?Thanks

Remember you pay your carrier every month for them to provide you with a quality service.
contact them again, and ask them to provision your account correctly.
Once that is done, go here and create a new BIS account.
https://bis.eu.blackberry.com/html?brand=tesco
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Help css for Tiles and JSF

Similar Messages

Maybe you are looking for