Get VM Automation Level via PowerCli

Setup:
Fully automated DRS cluster
Virtual Machine options - "Enable individual virtual machine automation levels" checked.
Most of the VMs have default automation level set
Few VMs have Disabled automation level
How can I get List of those Virtual Machines whose Automation Level is set to disabled using PowerCli? Is there any way?
Or is there any way just to get list of all VMs and their automation level using powercli?

NEW RESEARCH. HOPE IT HELPS:
Like many of us I tried valiantly to document the problems I was having then gave up cause I needed to make music and needed to be with my kids, girlfriend etc. I've gone back to hyperdraw, but for those who want to nail this puppy here are my archive notes:
Automation folder was easier to see in 6.4.3 than in 7. The manuals refer to commands that have been changed or moved since writing. Once you get them open again suggest you make a screenset for them. It does import into other songs via import settings once you set the windows up.
I was working on a twenty minute orchestral piece which played back with different levels every darn time. The way I finally solved it was study the pickup bar area of the arrange page (bar 0, bar -1 etc) and in automation event view noiced that I was seeing some phantom events that had a space before them:
I had event data for
"send 1" and then event data for
" send 1"
One of these was phantom. Deleting them made all my automation moves on that track play properly again. I then had to repeat this for every one of my 168 tracks of the piece. Since then I never used bar 0 and set all my arrange page events and folders to bar 1 not bar 0.
This was a year ago. So I cant remember (or no longer care) to open up automation folders or events anymore. But when and if you can see those folders or lists, check this anomoly out. Also check the automation folder occasionally to see that it hasn't lengthened its folder to go before bar 1 cause thats when the anomolies return (for me anyway)
Hope this helps. Good luck iSchwartz. Proud of you man for fighting a battle I gave up on.
Amin
G5 dual 2.5 Mac OS X (10.3.9) Stylus AND my original Minimoog. Lots of MOTU. No more Digi.

Similar Messages

Getting the volume level of a Microphone

Hi Everyone,
I've looked around and I haven't been able to figure this one out. Basically I need to get the volume level from the microphone as it is recording. For whatever reason, when I try and get the volume control from the TargetDataLine, it throws an exception. Is there a way to get around this or does this feature just plain not exist?
Thanks,
Robbie

hi metaldrummer610, i have the same problem and look for a solution since a long time.
i only can manipulate the gain of my players like:
public void setGain(double value) {
          try {
               FloatControl gainControl =
                    (FloatControl) auline.getControl(FloatControl.Type.MASTER_GAIN);
               float dB = (float)
               (Math.log(value==0.0?0.0001:value)/Math.log(10.0)*20.0);
               gainControl.setValue(dB);
          } catch (Exception ex) {
               ex.printStackTrace();
but in connection with my recorder it didn't work. i scanned many forums and try a lot, but i always get the exception like Unsupported control type: Mute , Volume etc.
     at com.sun.media.sound.AbstractLine.getControl(Unknown Source)
     at iax.audio.gsm.GSMRecorder.run(GSMRecorder.java:81)
     at java.lang.Thread.run(Unknown Source)
have you find another idea? i decide to try it with jni, maybe i can find an api to control it via c, c++...
regards, Karen

When I send a text message I do not get any confirmathat it has been delivered. Is there a way of getting an automated confiramtion of deleivery as I'm used to having this on a previous phone, and need to know that my texts have been delivered.

When I send a text message I do not get any confirmation that it has been delivered. Is there any way of getting an automated message confirmation delivery and time? I was used to this with my old phone and need to know that my text message has been delivered to the recipient's phone, and when.

Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.

My Ipad2 won't turn off. I've tried the reset method, holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either. Help ??

My Ipad2 won't turn off. I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work. I can't get onto the internet via wi-fi either (don't have a 3G card fitted). All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I just bought the BDP-S1500 yesterday and can not get it to work via wireless

I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

Hi BigDaddy317,
Please the link below for further assistance in connecting your wireless device to the internet.
https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
Please let us know if you're getting the same result or the error messages that you see.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Why am I getting frequent spam emails via iPad that are not coming through my primary email account? And how do I get them to stop?

Why am I getting frequent spam emails via iPad that are not coming through my primary email account? And how do I get them to stop?

Hi D.,
Unfortunately phishing is far too common these days. The articles below will help you determine the authenticity of the emails that you received.
Identifying fraudulent "phishing" email
http://support.apple.com/kb/ht4933
Identifying legitimate emails from the iTunes Store
http://support.apple.com/kb/ht2075
-Jason

I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please!

I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please! Also, I still don't understand exactly what the benefits are. At the moment it seems a lot of hassle to change a system that's been working perfectly well and that I'm very happy with. I'm not at all sure whether the mac mini (1.66 GHz INtel Core Duo) can be brought up to the relevant spec to run ICloud. Any thoughts?

There are two aspects to iCloud. One is simply getting an account, or migrating a mobileme account to iCloud. The second part is using the various features of iCloud to sync contacts, calendars, use music match or photo sharing, and store iWorks documents.
First to get an iCloud account:
If you have a mobileme account, you can migrate by simply logging onto www.icloud.com (ignore any references to Lion and just click through to complete the migration). If you have OS X Lion or an iOS 5 mobile device, you can create an iCloud account on that device using any valid AppleID.
Once you have an account, you can use JUST the mail account if you wishi - it is a standard IMAP account so you would set it up like any other IMAP email account you have, in whatever client program you use to read email.
To use the OTHER feautes of iCloud, your computers will have to be running OS X Lion (10.7). Your iPhone 3G will never be able to use iCloud as it cannot run iOS 5 (you need a min. of an iPhone 3GS to run iOS 5).
The requirements for OS X Lion are here - http://www.apple.com/macosx/specs.html You need a min. of a Core 2 duo processor so you mini is not capable of running Lion.
So, in your case, the single reasons for iCloud would be if you have a mobileme account, then use the online www.icloud.com to migrate your account so you do not lose your @me.com email address. You can use iCloud email (without using any other iCloud features) by setting it up as IMAP mail with these settings - http://support.apple.com/kb/HT4864
If you want an iCloud account and do NOT already have a mobileme account, you will need to upgrade one machine at least to Lion in order to be able to create an iCloud account.

How to get commerce item level taxAmount,shipTo details and etc?

Hi ,
How to get the commereceItem level taxAmount ,shipTo address details,price includes vat or not and discounts.
Regards,
Satya.

Hi SatyaVenkat,
You can call commerceItem.getShippingGroupRelationships(). It will return a list of commerceItem shippingGroupsRelationships.
So, with it you will be able to get all commerceItem information, about shippingGroups (that contains shippingAddress), priceInfo (that contais tax and discounts) and so on.
Hope it helps

Does somebody know how to get to the desktop via hot corners whilst being in full screen mode? it doesn't work on my mac... :/ thx for helping!

does somebody know how to get to the desktop via hot corners whilst being in full screen mode? it doesn't work on my mac... :/ thx for helping!

bump

I need to get my verification code via mobile number but use a different and can't get it, how do I update my number?

I need to get my verification code via mobile number but use a different number and can't get it, how do I update my new number so that I can get the text message verification code?

Verification code for two-step verification? If so, you can register a new new number to receive the code via text message by going to https://appleid.apple.com/account/home and click on "Manage Your Apple ID" and then on "Password and Security" and then "Add or Remove Trusted Devices." You will need a verification code in order to log in so if you currently only have one and it is no longer available you will need to use your Recovery Key. More information at: Frequently asked questions about two-step verification for Apple ID - Apple Support

HT4009 can i get in app purchase via itunes ?

can i get in app purchase via itunes ?

Do you mean via your computer's iTunes ? If you do then no, you can only do so within the app on your device.

How to get the max(level)?

Hi,
The below query returns level and other selected columns.
I need to get the max(level) 2nd column value in the below example.How to modify the query?
Ex
Level      max(level)     id
1 5 101
1 5 102
1 5 103
2 5 104
2 5 105
3 5 107
4 5 120
5 5 134
5 5 280
SELECT DISTINCT level lvl
,form_frms.emp_id
,form_frms.ing_emp_id
,form_frms.prve_id
,CASE
WHEN (select div_dn
from epm_prod epm
where epm.emp_id= form_frms.ing_emp_id) ='Y' THEN DIV_DN
WHEN NVL((select distinct 'N'
from emp_pro_version prvv
where prvv.is_py='Y' and
prvv.IS_VERSION ='N' and
prvv.emp_id=form_frms.ing_emp_id) ,'Y')='N'
THEN 'Y'
WHEN NVL((select distinct 'Y'
from employee epm
where emp.emp_id=form_frms.ing_emp_id
and epm.status<>'NEW') ,'N') ='Y'
THEN 'Y'
ELSE 'N'
END
ELSE 'N'
END UN_KNOWN_ID
FROM (SELECT empvv1.prvv_id
FROM emp_view_version empvv1
WHERE empvv1.is_version = 'Y'
) form_frms
START WITH form_frms.emp_id = :lv_emp_id
CONNECT BY PRIOR form_frms.ing_emp_id = form_frms.emp_id
ORDER BY level DESC, form_frms.emp_id,UNKNOWN_ID ASC;
Edited by: shivasha on Feb 9, 2013 12:24 AM

Maybe
select lvl,
       max(lvl) over (order by null rows between unbounded preceding and unbounded following) max_level,
       emp_id,
       unknown_id
from (SELECT DISTINCT
               level lvl,
               form_frms.emp_id,
               form_frms.ing_emp_id,
               form_frms.prve_id,
               CASE WHEN (select div_dn
                            from epm_prod epm
                           where epm.emp_id = form_frms.ing_emp_id
                         ) = 'Y'
                    THEN DIV_DN
                    WHEN NVL((select distinct 'N'
                                from emp_pro_version prvv
                               where prvv.is_py = 'Y'
                                 and prvv.IS_VERSION = 'N'
                                 and prvv.emp_id=form_frms.ing_emp_id
                             ),'Y'
                            ) = 'N'
                    THEN 'Y'
                    WHEN NVL((select distinct 'Y'
                                from employee epm
                               where emp.emp_id = form_frms.ing_emp_id
                                 and epm.status != 'NEW'
                             ),'N'
                            ) = 'Y'
                    THEN 'Y'
                    ELSE 'N'
               END UNKNOWN_ID
          FROM (SELECT empvv1.prvv_id
                  FROM emp_view_version empvv1
                 WHERE empvv1.is_version = 'Y'
               ) form_frms
         START WITH form_frms.emp_id = :lv_emp_id
         CONNECT BY PRIOR form_frms.ing_emp_id = form_frms.emp_id
ORDER BY lvl DESC,emp_id,UNKNOWN_IDRegards
Etbin

EP6 sp9 installation get stuck on "deploy via sdm/j2ee"

Hi,
I'm trying to install the ep6 SP9 after I have installed the WAS SP9 and upgrade it to SP13
Now, The installation get stuck at "deploy via sdm/j2ee" stage.
This result is the same after several attempts including shutdown and restrat the processes
There are not any errors on the installaion logs and everything looks fine
Does anybody has any idea what it wrong ?
Thanks
Ami

Thanks Priya for your reply,
I did saw on the java log file the following error:
<b>
java.lang.NoClassDefFoundError: iaik/utils/Base64Exception</b>
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:108)
at com.sap.engine.core.configuration.impl.persistence.rdbms.
This is the only error message I'm getting.
The installation is being freeze for many hours and there is not any CPU load.
So I think that this message error causing the installation to freeze.
Does anyone familier with that error ?
Thanks a lot
Ami

Poweshell script to parse a XML document to get all Leaf level nodes with Node names in CSV

Hi Experts,
I want to write a Powershell script to parse a XML document to get all Leaf level nodes with Node names in CSV
<?xml version="1.0" encoding="UTF-8"?>
<CATALOG>
   <CD>
      <TITLE>Empire Burlesque</TITLE>
      <ARTIST>Bob Dylan</ARTIST>
      <COUNTRY>USA</COUNTRY>
      <COMPANY>Columbia</COMPANY>
      <PRICE>10.90</PRICE>
      <YEAR>1985</YEAR>
   </CD>
</CATALOG>
Need to display this as
CD_Tiltle, CD_ARTIST, CD_COUNTRY, CD_COMPANY, CD_PRICE, CD_YEAR
Empire Burlesque, Bob Dylan,USA,Columbia,10.90,1985
and so on..
I do not want to hard code the tag names in the script.
current example is 2 level hierarchy XML can be many level till 10 max I assume
in that case the csv file field name will be like P1_P2_P3_NodeName as so on..
Thanks in advance
Prajesh

Thankfully, I have writtenscript for ths same $node_name="";
$node_value="";
$reader = [system.Xml.XmlReader]::Create($xmlfile)
while ($reader.Read())
while ($reader.Read())
if ($reader.IsStartElement())
$node_name += "," + $reader.Name.ToString();
if ($reader.Read())
$node_value += "," + $reader.Value.Trim();
Thanks and Regards, Prajesh Please use Marked as Answer if my post solved your problem and use Vote As Helpful if a post was useful.

Cant get my pc online via extreme

I have my powerbook online(wirless) via extreme and my dell laptop(wireless),all working fine.however,i cant get my pc online via ethernet on the extreme.i have double checked all connections and they seem correct.Does anyone a any suggestions? thanks

Rick asked you a few questions above - you never responded to them! If you don't understand the questions, please ask for an explanation rather than ignoring them.
The key issue is - does it get an IP address from your Airport Base Station? If you are running Windows XP, go to Start->All Programs->Accessories->Command Prompt. Type "ipconfig" without the quotes, and press the return key. What IP address does it report your PC has?
See also message #1 in this discussion, posted by iFelix:
iFelix, "Connecting Windows 98se PC to Airport Extreme using ethernet" #1, 04:30pm Aug 21, 2005 CDT
This tells you the proper configuration for your PC's ethernet interface, so that it can obtain an IP address from your Base Station.

Get VM Automation Level via PowerCli

Similar Messages

Maybe you are looking for