Get WorkStatus from the other model issue (EPMWorkStatus)

Hello,
I’ve faced an issue with EPMWorkStatus formula. What I have:
       Two categories, let’s call them C1 and C2. C2 is a copy of C1 (was copied with standard copy package)
       In C1 there are some work statuses assigned
       In C2 there are no work statuses assigned yet
       I have two models, let’s call them M1 and M2. Work statuses are configured only for one model – M1. And the driver dimension presents only in M1 model
       Dimensions involved in work status assignment are Category (C type dimension), Time (T type dimension), P_PROJECT (U type dimension) and the driver dimension WFSTATUS (U type dimension)
         I have 3 statuses, let’s call them s1, s2, s3 (in this order)
       I have 2 connections: one to connect to M1 (let’s call it Connection1) and the other to connect to M2 (Connection2)
I have workbook saved in M2. And I need to get work status with EPMWorkStatus formula from model M1. It seems to be a pretty easy task – just to point “M1” (model name) in “Connection name” parameter of the EPMWorkStatus formula:
=EPMWorkStatus(M1,0,”C2”,[any Time dim base member], [any P_PROJECT dim base member],[any WFSTATUS dim base member])
But I faced an issue. The formula returns value “s3” though there are no work statuses set for C2 category because I just created it. And there’re also no records for C2 category in generated work status table for the model M1 (I checked it at SE16 transaction). That is the formula should have returned “s1” value.
I made some investigations and found out that if I connect using Connection1 (then change active connection to Connection2), then I got the correct results. But if I connect using Connection2, I always have the incorrect results. Even if I connect using Connection2 and then change active connection to Connection1 I have the incorrect results as well. So the results depend of what connection I used to log on (“Log on” button in Excel EPM tab).
I also found out that received status from the EPM formula when I connect to Connection2 depends of the status I have in the same scope for category C1. That is if I have “s1” status for C1 category, I will have “s1” status for C2 category.
How can I get the work status from the other connection?

Hi Mikhaili,
Save template by marking "do not store connection"
Go to edit report -> options and select "do not store connection"
Regards,
Shrikant

Similar Messages

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

How can i get data from the other system?

hi,
i want get some data from the other r3 system in my r3 system? now this two r3 system are installed two server.

Hi,
U can achieve this by RFC function module...
create a function module and make it as REMOTE ENEBLED IN ATTRIBUTES TAB..
for example i have to r/3 systems as A and B.
I want to get data from B system..
so create the FM in B system and then in A SYSTEM u have to call that one ,like this....
DESTINATION NAME IS FOR SYSTEM B.
CALL FUNCTION 'ZRFC' DESTINATION <DESTINATION NAME>
EXPORTING
IMPORTING
TABLES..
Regards,
Nagaraj

Chat user is not getting message from the other users

In my application when user [A] initiate the chat with user[B] , I am facing following issues
-          User[B] is not getting initiation notification so that I am unable to open chat pod for user [A] on user[B] application
-          Due to above problem , User[B] not getting any message sent by the User[A]
-          User[A] can send only one message and it is displayed on simple chat pod
when User[A]tries to send more then one message it is not displayed on simple chat pod but on the console I can see the messages
following is sample code
public function connectChat() :void {
_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
public function connectChat() :void{
trace('connectChat');_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
//Creates the nodes if they don't exist
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
/*** Checks if a chat is going to be started with this specific user
protected function onItemReceive(event:CollectionNodeEvent):void {
var item:MessageItem = event.item;
var openChatEvent:OpenChatEvent = OpenChatEvent.ToOpenChatEvent( item.body, OpenChatEvent.OPEN_CHAT );
switch (item.nodeName) {
case START_CHAT_LIST:
trace("Starting Chat Notified");
if( openChatEvent.userId && openChatEvent.userId == this.connectSession.userManager.myUserID ){
this.dispatchEvent( openChatEvent );
if( this._collectionNode.isSynchronized )
this._collectionNode.retractItem( START_CHAT_LIST, openChatEvent.roomId );}
break;}
/*** Publishes a request for someone to join a chat
public function publishChatRequest(notificationEvent : NotificationEvent) :void {
if( this.connectSession.userManager.getUserDescriptor( notificationEvent.userID ) ){
var openChatEvent:OpenChatEvent = new OpenChatEvent( OpenChatEvent.PUBLISH_CHAT,null,notificationEvent.sharedID, notificationEvent.userNotificationList, null, notificationEvent.userID );
if( this.presenceUsers )openChatEvent.descriptors =
this.presenceUsers; _collectionNode.publishItem(
new MessageItem( START_CHAT_LIST, openChatEvent, openChatEvent.roomId ) );}
else{
Alert.show(
"User "+ notificationEvent.userID + " is not logged in.", "Publish Error" );}

A) are these methods copied twice in the code here on purpose?
   connectChat() and onSynchronizationChange is repeated in code due copy paste mistake
B) are both users subscribing to _collectionNode right away? Do each of them
get to onSynchronizationChange?
   Yes , each of them get to onSynchronizationChange
C) If you put a breakpoint in onSynchronizationChange, do you see the node
get created? Do you see it in the dev console?
Yes , it is creating a node
D) Is user B receiving an onItemReceive at all? Is user A?
Yes , it is creating a node
Now both the user getting chat message, have following issue
When user A initiate the chat with user B this action is not opening chat pod / window on user B end which shows user A has initiated chat with user B
But when user B click on user A name to initiate the chat, this action opens a chat window and user B can see message send by user A
Above scenario is not normal chat behavior in which other user gets the notification of chat . what could be the problem

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

I recently had to get my iPhone 4s replaced. The old phone was backed up to ICloud. I get a message when I plug this one in that it is not backed up and there isn't enough storage left to back it up. How to I remove from the other phone so I can back th

I am trying to back up my new Iphone on to ICloud. It shows I dont have enough storage because it still has stuff from the old IPhone. How can I back up this phone and erase from the other. Apple kept the other phone when they replaced it. If I hit the delete storage for the other phone (which shows up on the Icloud Icon on this phone) will I lose everything on this phone? That's what I want to avoid....

If it's corrupt, generally it would be lost.
However, there is third-party software out there that can retrieve some of the data, those of which however I could not recommend as I have never done so myself.
Also, if the old 4S was running a more recent software version than the current 4S, that may cause the issue however usually iTunes tells you exactly that.
Good luck in retrieving that information.

How can i get the System Time from the other host

I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.

Open a socket to port 13 and read a string with the time.
-or-
Open a socket to port 27 and read 4 bytes that are a network order timestamp
Assuming that your UNIX machine has those services running, most do

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

This might help: http://support.apple.com/kb/HT1495.

How to get rid of the other from the MacBook Air Memory?

How to get rid of the other from the MacBook Air Memory? I reviewed my newly purchased MBA ear;y 2014 i7 8GB RAM and there was 24+ GB of "Other". I have Yosemite. I have restored to factory with no luck. is there a memory cleaner or process to eliminate what is not needed in Other? I know some files there are settings, and such but not 24+ GB worth is such of stuff.

About “Other”:
http://support.apple.com/en-us/HT202867
Go step by step and test.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Backup your computer.
3. Empty Trash.
   http://support.apple.com/kb/PH13806
4. Disk space / Time Machine ?/ Local Snapshots
Local backups
   http://support.apple.com/kb/ht4878
5. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
6. Re-index Macintosh HD.
    This will take a while. Wait until it is finished.
    System Preferences > Spotlight > Privacy
    http://support.apple.com/kb/ht2409
7.Try OmniDiskSweeper. This will give the storage size details of the items.
   https://www.omnigroup.com/more
   Select Macintosh HD and click “Sweep Selected Drive” at the bottom.
   Be careful. Delete only the files that can be safely deleted. If you are not sure about any file, don’t touch it.
8. Move iTunes, iPhoto and iMovie media folders to an external drive.
    iTunes
    http://support.apple.com/en-us/HT201562
    iPhoto
    http://support.apple.com/kb/PH2506
    iMovie
    http://support.apple.com/kb/ph2289

HT4972 I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other?

I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other? I have 2 of the same iPod's and logged onto both with the same as well as different apple ID's and passwords to each respective iPod and the completion of my downloaded songs has disappeared into thin air. Where did it go? How do I get the credit too re-download those songs to the correct iPod? Please help me!! [email protected]

What happens when you try to redownload them?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
On a computer go to iTunes>Store>View Account>Sign in and go to purchased history and see if you actually purchased them.
Try redeeming the card again
Contact iTunes
Apple - Support - iTunes - Contact Us

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

IChat Error: "Can't get video from the camera"

When I try to Screen Share with iChat on a local network, I receive the error "Can't get video from the camera" when I have an external camera plugged into the FW400 port on my Mac Mini. The Screen Sharing feature works great when the camera is not connected. Anyone know why this is and how to fix it?

Tell us about the Network you created please.
What make and model modem ?
Can it route (issue IPs) ?
IS there a router ?
Make and model of that please ?
If there are two devices which is doing DHCP if any are ?
IS there any computer that is sharing it's Internet Connection with any other computer ?
I take it from the title and the post that you infer you can Video and Audio chat ?
The Cannot get Video from Camera normally gets and Error Log pop up.
This can be opened with the reveal triangle on the left. The Details shown will have a Error number. Do you know what this log says ? (normally Error 20 or 21)
Old logs are stored in Users/(your account)/Library/Logs/iChatConnectionErrors by date.
IF you post an Error Log stop at the line that Says "Binary Images for iChat" as we don't need the bits below that yet.
As the Screen share in iChat uses an Audio component then the Camera if it is also the Mic needs to be ON.
In your case this may mean that in the ichat Video Menu both Camera Enabled and Mic Enabled should both be ticked.
(I have never seen an iChat error code for not (specifically) being able to get the Mic input so the message might be the only one iChat can pop up)
It does seem very odd that it only effecting Screen Sharing.
I have a Firewire connected DV converter that has two Firewire ports itself so I can input the camera feed to two computers. When this is in place the System also sees it as a Network.
I have also heard of one person with a Firewire Stills camera and I think the Storage space was seen as an External Device and therefore appeared Networked which is why I asked the first set of questions.
iChat does not like being in Two networks (a modem that issues IP address and a router doing the same or Wireless to a neighbour and Ethernet to your Own Internet connection, the Mac being the hub in a Share Internet connection, Wireless and Ethernet to the same router and using Parallels when set to Share the Mac's IP are the most common)
The Screen Sharing option in iChat > Video Menu is ON ? (at both ends ?)
As iChat's Screen Sharing is related to the System Screen Sharing and therefore Apple Remote Desktop you may find that in any routing device you may have to open ports 5900 and 5988 if not using UPnP
http://support.apple.com/kb/TS1629?viewlocale=en_US
You said Local Network. Do you mean this is using the Bonjour Buddy List ?
11:21 AM Saturday; June 14, 2008

I've connected my ipad to my TV via hdmi but cannot get sound. Is there a way to get sound from the TV?

I'd like to get sound from the tv for my keynote presentations. Is there a way to do this via the hdmi connection? Or do I need to connect an 'audio-out? Thanks in advance for your help

the hdmi should transfer both sound and picture
http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=a8e08a2bb3c16bf3cd606aecff68b12c10fe327cd7b063c9bbc492e57158bbfa0778 d5b941eb2a8c1c5f2e25e51cf7b82e193c9a722651b3fc2694996f7b5281b8bf4338c46284247b76 ccce6907fa6caee062d974158ee4d0336fca558384426e7a6c6cbf3ee58c8f53f8db53c9ef91
Supports multi-channel digital audio output on compatible devices
make sure your ipad is not muted
make sure you volume is not all the way down
make sure audio play out of the ipad when not connected to the hdmi adapter
if you did and it don't work then it's likely an issue with the connetor
or the tv or it's settings

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

Why does Photoshop display colors differently from the other applications even in sRGB mode ?

Hello all !
Here is my problem :
Photoshop is set to use sRGB workspace (in edit/colors.../workspace/RVB).
If I understand correctly this is how all native windows applications work.
This means Photoshop and the other applications should display the same colors on a file with a sRGB profile.
Now this is the case until I calibrate my monitor.
When I do, Photoshop colors become different from the other applications (irfanview, explorer, browsers...).
The only way I found to let everything display the same colors is to set Photoshop to use Proofing/RVB Monitor.
What upsets me even more is that Photoshop colors look "better" to me (dark grays seem to dark to me in the other applications.)
I have read that this is because Photoshop takes the new profile into account and others applications do not. But I don't think this is relevant here because everything is in sRGB so the only profile is my monitor's and I think calibration is handled globally by windows : everything (including browsers, explorer, and Photoshop) changes color if I choose to apply the monitor's profile or not with windows color management tool ("use my parameters for this device").
Here is my system configuration :
- Photoshop CS4 (11.0.2)
- Windows 7 64 bits
- HP ZR2440W and DELL 2209WA (these are not wide gamut screens)
I have spent two days trying to figure the logics behind this and really am upset. Any help would be greatly appreciated. Don't hesitate to ask me if there is something that is unclear or some information I forgot to mention.
Thanks in advance,
Yannick

That sounds like an invitation to continue to talk about the issue. Fair enough.
I'm not sure where you're getting "insecurity"... I am just trying to help you help others more effectively.
I invite you to re-read just the first sentence of what you wrote very carefully, putting yourself in the shoes of someone struggling with both the terminology and the concepts:
Photoshop (CMS) reads an embedded ICC profile and CONVERTS it to the custom monitor profile for a theoretical 'true color' display
Think about what "Photoshop (CMS)" might mean to a person who doesn't know the acronym might stand for "Color Management System" (which is I assume what you meant). Adobe themselves don't call it "CMS", they use the acronym "CMM" (Color Management Module). The term "CMS" is used in the computer industry for about a dozen different things.
While a color profile might have been embedded in an image file before it was opened by Photoshop, Photoshop works on documents. A profile is not "embedded" in a document, it is maintained by Photoshop with the document and describes the color values in the document. If Photoshop opens a document without an embedded profile, depending on settings and user choices it might assign a profile or it might even operate on the document without color-management. Oversimplification doesn't help people when they're trying to learn new things unless it's described as such, for example, "This is a bit of an oversimplification..." or "Generally speaking..."
Not every monitor profile is a "custom monitor profile". Quite often a standard profile (e.g., sRGB IEC61966-2.1) is associated with a monitor by the operating system as a default, or a factory profile is installed by a driver package or system update. Your use of the term "custom" is a bit ambiguous and could be read as implying the creation of a profile using a calibration and profiling device specific to the particular monitor.
Photoshop's color management code does not convert an embedded ICC profile at all (read carefully what you wrote). As I said, it transforms color values. That was the key error in your description that prompted me to comment.
If ever there is a time to pick words carefully, it's in a color-management discussion.
-Noel

Get WorkStatus from the other model issue (EPMWorkStatus)

Similar Messages

Maybe you are looking for