Getting back to 8128kbps sync :P

Question

My stats are
ADSL line status
Connection Information
Line state
Connected
Connection time
2 days, 02:25:25
Downstream
7,360 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Fast
Noise margin (Down/Up)
15.0 dB / 24.0 dB
Line attenuation (Down/Up)
6.3 dB / 2.5 dB
Output power (Down/Up)
11.2 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
0 / 5
CRC Errors (Down/Up)
1485 / 60
HEC Errors (Down/Up)
1745 / 1
Error Seconds (Local/Remote)
1464 / 56
 although up untill like 2 weeks ago I use to sync at 8128kbps but it seems that every time I resync it gets a little but lower and then goes back up the next day to this. How can I get it back to what it use to be. I do have a feeling that my bt home hub 2 is on its last legs though as it has fell on the floor numerous times from shelf height! :L
Thanks
Solved!
Go to Solution.

Answer 1

Your noise margin is 15, normally it should be 6 at the start of a connection.
I wonder if your default margin has been increased due to a series of reconnects in a short period (lightning storms etc can cause this). If this is the case any new connect you get will always have a noise margin around 15 and that would be the cause of your lost speed since each db in the margin is one less in sync speed.
Only the mods can get the default snr margin reset
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’