Getting CI Error while Update Job Code Description :
Hi All,
Am getting the CI error (Error saving the component interface CI_CMP_RULE_DEFN for Rate Code Defaulting Rule) while try to update the Existing Job code description. But am able to add the new job code details .
The message catlog number MESSAGE_SET_NBR=1000 AND MESSAGE_NBR=1102 is getting trigger to throw the error.
Can any one help me on which scenario this error will occur.
Regards,
Hari A
This is called in JOB_CODE_TBL SavePostChange Function Update_Jobcode_Rule.
If (ciHasErrors(&ExceptionArray)) Then
/* Create an error because CI was not successfully saved. */
Error MsgGet(1000, 1102, "Message not found.", &RULE_ID);
ElseThe code is already passed the getci, so you do have permissions to start this CI, but the save was unsuccessfull.
See if you can try to find some more loggin in the appserver or run it in trace mode the see the actual error.
Hakan
Similar Messages
-
Get an error while updating itunes?
While attempting to update iTunes i get an error during installation and cant access itunes anymore
Tried reinstalling manually but the same error message pops upWhat does the error message say? (Precise text, please.)
-
Getting 80188309 error while update
Hi , Am getting an error stating an update was downloaded , but couldn't be opened (80188309) " i did restart of mobile while downloading update still the same please help !!!
I am getting the same error, but now Microsoft community says they have resolved the issue and have asked to try again. Now i am trying again.
http://answers.microsoft.com/en-us/winphone/forum/wp8-wpupdate/update-was-downloaded-but-could-not-b... -
Itunes won't detect itouch after getting an error while updating to iOS 6
Hello, I was updating my itouch 4g to iOS6. I received an error (sorry I didn't manage to record the error)
Now, my itouch shows only the usb cable and iTunes logo.
My itunes doesn't detect my itouch.
However, my computer does detect it as it makes the sound where you detach/attach an USB device.
I've tried holding the home and top button together but it doesn't work.
Please help me and thank you in advance!- Try manually placing the iPod in Recovery Mode and then try restoring via iTunes.
- Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try another computer
If you get an error, please remember what it said. -
Getting index error while updating table
Hi All,
I am getting error
SQL> UPDATE bqcustomer
2 SET
3 namelegal = 'SME ' || SubStr(bqcustomer.namelegal,8),
4 nameshort = 'SME ' || SubStr(bqcustomer.nameshort,8),
5 nametrading='SME ' || SubStr(bqcustomer.nametrading,8)
6 WHERE
7 hassmeaccount = 1
8 AND nametrading LIKE 'GLOBAL %' ;
UPDATE bqcustomer
ERROR at line 1:
ORA-08102: index key not found, obj# 60473, dba 46348301 (2)
any help on this will be appreciated .
Thanks in advance
Sachin SrivastavaORA-08102 INDEX KEY NO FOUND, OBJ# 25095, DBA 33567643 (2)
-
Getting database error while updating data to mysql table.
user registration.jsp < jsp user view to get input >
<?xml version="1.0" encoding ="UTF-8"?>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x" uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head>
<title>Registeres USers Login Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<body>
<%--debugging code--%>
<%@ include file="debug.jsp" %>
<table width="1049" cellpadding="5" align="center">
<tr>
<td width="2378"><div align="center">
<h2 align="center"> User Registration</h2>
<p>
<c:url var="HmePgeURL" value="/cw/router/home" scope="page"/>
<a href="${HmePgeURL}">Home</a> <c:url var='BSPgeURL' value='/cw/router/login' scope='page'/>
<a href="${BSPgeURL}">Buy or Sell</a>
</p>
</div></td>
</tr>
</table>
<p align="center"> </p>
<p>This website is only open to members of the De MontFort University.
You will need a current @learner.dmu.ac.uk e-mail address in order to register.</p>
<p> If you've already registered for one site you do not need to register again </p>
<c:url value="/cw/router/userregistration" var="UregPgeURL" scope="page"/>
<form name="frmregister" method="post" action="${UregPgeURL}">
<div>
<table width="726" height="285" border="0" align="left" cellpadding="2" cellspacing="0">
<tr>
<td width="157" align="right" >Name:</td>
<td width="561" > <input name="txtname" type="text" value="${param.txtname}"/> </td>
</tr>
<c:if test="${!empty requestScope.reqInvalidUserName}">
<c:out value="${requestScope.reqInvalidUserName}"/>
</c:if>
<tr>
<td width="157" align="right" >Department</td>
<td align="left" >
<select name="txtdepartment" value="${param.txtdepartment}" >
<option></option>
<option value="Faculty of Art and Design">Faculty of Art and Design</option>
<option value="Faculty of Business and Law">Faculty of Business and Law</option>
<option value="Faculty of Computing Sciences and Engineering">Faculty of Computing Sciences and Engineering</option>
<option value="Faculty of Health and Life Sciences">Faculty of Health and Life Sciences</option>
<option value="Faculty of Humanities">Faculty of Humanities</option>
</select>
</td>
</tr>
<tr>
<td align="right" >Programme</td>
<td ><input type="text" name="txtprogramme" value="${param.txtprogramme}" />
(eg: BIS,SE) </td>
</tr>
<tr>
<td align="right" >Telephone Number: </td>
<td ><input name="txtphonenum" type="text" value="${param.txtphonenum}" /></td>
</tr>
<tr>
<td align="right" >Date Of Birth: </td>
<td ><input name="txtday" type="text" size="15" value="${param.txtdob}" />(of format YYYY-MM-DD)</td>
</tr>
<tr>
<td align="right" >Username</td>
<td align="left" >
<input name="txtuserid" type="text" size="15" value="${param.txtuserid}" />
(eg. p07269027 from [email protected])</td>
<c:if test="${!empty requestScope.reqInvalidUserId}">
<c:out value="${requestScope.reqInvalidUserId}"/>
</c:if>
</tr>
<tr>
<td align="right" >Password</td>
<td align="left" >
<input name="txtpassword" type="password" size="15" value="${param.txtpassword}" />
</td></tr>
<c:if test="${!empty requestScope.reqInvalidPassword}">
<c:out value="${requestScope.reqInvalidPassword}"/>
</c:if>
<tr>
<td align="right" >Confirm Password </td>
<td align="left" >
<input name="txtpasswordconf" type="password" size="15" />
</td>
</tr>
<tr>
<td colspan="2" align="center">
<input name="frmsubmit" type="submit" value="Register User" />
<input type="reset" name="Reset" value="Reset" />
</td>
</tr>
</table>
<c:if test="${!empty requestScope.reqQueryErrorMessage}">
<c:out value="${requestScope.reqQueryErrorMessage}"/>
</c:if>
<c:if test="${!empty requestScope.reqInvalidUpdate}">
<c:out value="${requestScope.reqInvalidUpdate}"/>
</c:if>
</div>
</form>
</body>
</html>
proregistration.jsp ( registration process jsp)
<?xml version="1.0" encoding ="UTF-8"?>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x" uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<%-- \WEB-INF\jsp\cwjsps\probooksforsale.jsp --%>
<%-- Probookforsale --%>
<%-- skip field validation and provide blankpage if first time in --%>
<c:if test="${empty param.frmsubmit}">
<c:set var="reqOutcome" scope="request" value=" "/>
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- initial request --%>
</c:if>
<%-- validate txtname --%>
<c:if test="${empty param.txtname}">
<c:set var="reqInvalidUserName" scope="request" value= "User Name Cannot Be Empty"/>
</c:if>
<%-- validate txtuserid --%>
<c:if test="${empty param.txtuserid}">
<c:set var="reqInvalidUserId" scope="request" value= "User ID Cannot Be Empty"/>
</c:if>
<%-- validate txtpassword--%>
<c:if test="${empty param.txtpassword}">
<c:set var="reqInvalidPassword" scope="request" value= "Password Cannot Be Empty"/>
</c:if>
<%-- if userid invalid or username invalid --%>
<%-- redisplay form with originl typed-in data and with errors marked --%>
<c:if test="${empty param.txtname or empty param.txtuserid}">
<c:set var="reqOutcome" scope="request" value= "failure" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- failure --%>
</c:if>
<c:catch var="pgeQueryError">
<sql:update var="pgeRowCount" scope="page" >
<%-- insert details to trader table --%>
INSERT INTO trader(dbTraderName,dbTraderDepartment,dbTraderProgramme,dbTraderPhoneNum ,dbTraderDOB,dbTraderPNumber,dbTraderPwd)
VALUES(?,?,?,?,?,?,?)
<sql:param value="${param.txtname}"/>
<sql:param value="${param.txtdepartment}"/>
<sql:param value="${param.txtprogramme}"/>
<sql:param value="${param.txtphonenum}"/>
<sql:param value="${param.txtdob}"/>
<sql:param value="${param.txtuserid}"/>
<sql:param value="${param.txtpassword}"/>
</sql:update>
</c:catch>
<%-- check For query Error --%>
<c:if test="${not empty pgeQueryError}">
<c:choose>
<%-- check duplicate record --%>
<c:when test="${pgeQueryError.rootCause.errorCode =='1062'}">
<c:set var="reqQueryErrorMessage" scope="request" value="User already Registered - Duplicate Record" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/login.jsp"/>
</c:when>
<c:otherwise>
<%-- database error --%>
<c:set var="reqQueryErrorMessage" scope="request" value="Database Error" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/>
</c:otherwise>
</c:choose>
<c:set var="reqOutcome" scope="request" value="failure" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/>
</c:if>
<%-- check For no rows returned --%>
<c:if test="${pgeRowCount !=1}">
<c:set var="reqInvalidUpdate" scope="request" value="*** rowCount not = 1"/>
<c:set var="reqOutcome" scope="request" value="failure"/>
<jsp:forward page="/WEB-INF/jsp/cwjsps/userregistration.jsp"/> <%-- failure --%>
</c:if>
<%-- Otherwise --%>
<%-- Outcome is success --%>
<c:if test="${pgeRowCount ==1}">
<c:set var="reqOutcome" scope="request" value="success" />
<jsp:forward page="/WEB-INF/jsp/cwjsps/login.jsp"/> <%-- success --%>
</c:if>
router.jsp ( maps the jsp page based on success and failure)
<?xml version="1.0" encoding ="iso-8859-1"?>
<%-- /WEB-INF/jsp/cwjsps/router.jsp --%>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="x" uri="http://java.sun.com/jsp/jstl/xml" %>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
<%-- setup session if one does not exist --%>
<%@ page session="true" %>
<%-- set up debug variable --%>
<c:set var="sessDebug" scope="session" value="true"/>
<%-- get pathinfo information from the request --%>
<%-- this defines which use case has been requested --%>
<c:set var="pgePathInfo" scope="page" value="${pageContext.request.pathInfo}" />
<%-- uc02 : Login --%>
<c:if test="${pageScope.pgePathInfo =='/home'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/home.jsp"/>
</c:if>
<c:if test="${pageScope.pgePathInfo =='/login'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/prologin.jsp"/>
</c:if>
<%-- uc01 : View Details Of Books For Sale --%>
<c:if test="${pageScope.pgePathInfo =='/viewbooksforsale'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/probooksforsale.jsp"/>
</c:if>
<%-- uc01 : process User registration--%>
<c:if test="${pageScope.pgePathInfo =='/userregistration'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/proregistration.jsp"/>
</c:if>
<%-- uc01 : debug --%>
<c:if test="${pageScope.pgePathInfo =='/debug'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/debug.jsp"/>
</c:if>
<%-- uc01 : view Traders Own View --%>
<c:if test="${pageScope.pgePathInfo =='/Traderhomepage'}" >
<jsp:forward page="/WEB-INF/jsp/cwjsps/Traderhomepage.jsp"/>
</c:if>
<%-- otherwise --%>
<jsp:forward page="/WEB-INF/jsp/cwjsps/home.jsp"/> &nbHi..
Correcting the record from PSA is temporary solution depends on u r criticality....
Only Solution is to correct the record at source system level... Generally Material master data record is imp so just try to fix temporarily so that it vl not affect u r loads until it is corrected at Source System level..
Note: inform the problem to u r co-ordinator and try to correct it ASAP... and explain the temp solution(PSA correction)...
cheers.. -
Getting timeout error while updating a record from c#
Hi,
I have around 30k records in a tables. When I update that record inside the Transaction (Enterprise Data Library, c#) , it takes long time and throws timeout error.
But I am able to update the same record via Toad.
In the morning I tried same updating the record, it works without any change in the code or script.+
is it due table lock or db related issue? please adivse, how to resolve if occurs again.
anandCode:
private static void Save()
using (DBTransactionManager dbTransactionManager = new DBTransactionManager())
try
DataTableDAL.Instance.ExecuteDML("Update Voyage SET BallastBonus = 30000 WHERE ID = 'AE53B610BEA743EC8AFBAED0C8349BF8';");
//commit database
dbTransactionManager.Commit();
catch
dbTransactionManager.RollBack();
throw;
Table
Column Name ID Pk Null? Data Type Default Histogram Encryption Alg Salt
ID 1 1 N NVARCHAR2 (32) None
CALCNUMBER 2 N NUMBER (10) None
CURRENCYID 3 N NVARCHAR2 (32) Frequency
CALCTYPE 4 N NUMBER (5) Frequency
ESTIMATEDESCRIPTION 5 Y NVARCHAR2 (200) None
ESTIMATEGROUPDESCRIPTION 6 Y NVARCHAR2 (200) None
BALLASTBONUS 7 Y NUMBER (12,2) None
BALLASTBONUSCOMMPCT 8 Y NUMBER (6,3) None
ISESTIMATE 9 N NUMBER (1) None
ADDITIONALSTEAMVALUE 10 Y NUMBER (8,4) None
ISADDITIONALSTEAMPCT 11 Y NUMBER (1) None
ADDITIONALPORTVALUE 12 Y NUMBER (8,4) None
ISADDITIONALPORTPCT 13 Y NUMBER (1) None
CREATEDBY 14 N NVARCHAR2 (32) Frequency
CREATEDDATE 15 N DATE None
UPDATEDBY 16 Y NVARCHAR2 (32) None
UPDATEDDATE 17 Y DATE None
LUMPSUMCARGOCOST 18 Y NUMBER (1) None
BUNKERPRICEMETHOD 19 Y VARCHAR2 (30 Byte) None
INCCONTCALCRESULT 20 Y NUMBER (1) None
FINAL_EST 21 Y NUMBER None
SPOT_VOYAGE 22 Y NUMBER (1) None
ISRUNCOSTEDIT 23 Y NUMBER (1) None
Index
Table doesnt have any index, except primary key index.
Total Records
35,000
Hope this input might sufficient to help me. -
Getting 507 error while Updating OS version
Hi Folks,
i am updating bb 8310 OS version 4.2.2.114 to 4.5.X.X. Now i have wipe my 8310 device, Now any body can tell me the proper step to update this os version?
i am trying to install 4.5.x.x version, but through Apploder but is is giving "The blackberry desktop software does not have BB device software for the device that you have connected to the computer,contact your wireless service provider or system administrator".
Plz help me out.Thanks for all the advice, it all really makes sense. I tried it, however, and it still gave me the same error message the previous guy said he got that it was unable to reconnect to the device. I even tried it without the battery in there....
I have a 8830 World Edition
Still getting the 507 error
Must have tried reinstalling device software 30+ times...
PLease Help!!!
Have A Great Day!! -
ERROR WHILE UPDATING TO INFOCUBE
Hi All,
I am using a flat file to load data from datasource into infocubes.The data reaches PSA tables with no errors but after the execution of DTP , the monitors shows up Error Updating to infocube, intitally I thought there could be some problem in the data format of certain fields in the flat file but everything looks to be correct, there are no errors in the transformation rules.
Here's the ST22 analysis :
what happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Termination occurred in the ABAP program "CL_RSAWBN_NAV_TRACE===========CP" -
in "DUMP".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 42
of the (Include) program "CL_RSAWBN_NAV_TRACE===========CM004".
I have been deleting requests from the infocube , datasources and deleting entries from PSA but always endup getting the "Error while updating to Infocube"
Have to figure out the solution as the planning team is waiting for me to copy the actual data to the plan cube
ThanksHi,
You should have the following format in the flatfile :
Considering today's date(18 Apr 2008) for example:
0CALDAY 20080418
0CALMONTH 200804
0FISCPER 0042008
0FISCPER3 0042008 (I think this can have additional periods as well, not sure though)
0FISCVARNT No idea about this.
Reward with points if helpful.
Regards
Hemant Khemani -
Error while updating the plan in Enterprise link
hi
i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
Thanks in advanceI also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad -
RFC_ERROR_SYSTEM_FAILURE error while updating the sick leave in MSS
Hi Guru ,
We are getting RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
Please tell how to resolve this .
Dump part :
Runtime Errors MESSAGE_TYPE_X
Error analysis
Short text of error message:
System error
Long text of error message:
Technical information about the message:
Message class....... "HRTIM00BUFMSG"
Number.............. 001
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Information on where terminated
Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
"INITIALIZE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 55
of the (Include) program "LHRTIM00_TMWBUFFERCB5".When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
2. Have an ABAP programmer review where the RFC is failing on the Backend System
3. Set up an External Breakpoint in the backend RFC. Step to do this:
a. Get the Backend UserID of a test portal user that is having this issue.
b. Ensure that test user has "Debug Display" access in the Backend System
c. Log into the Backend system, go to SE 37 and display your RFC
d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
e. Set an external breakpoint any where you want in the RFC.
f. Run the Leave request as the test user.
g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
Regards,
Tom -
Error While updating info in the People Form-Additional Personla Details
Hi All,
Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
Error Like:
APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure per_htrca_merge_tca_person at step10.
Please contact your support represntative.
Thanks -
SowmyaThanks you,
By this Note id:395136.1
Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
with this Note id:278422.1
We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
we are using applications 11i.
please help to find this Profile option.
But with this note id:ID 395136.1
This is Working.
Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
Thanks for the Support-
Sowmya.
Edited by: user13419037 on Aug 11, 2011 11:53 PM
Edited by: user13419037 on Aug 12, 2011 12:03 AM
Edited by: user13419037 on Aug 12, 2011 3:45 AM -
Error while updating the content in workflow
Hi,
I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
Content Server Request Failed
Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.Service.doSubService(Service.java:3465)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
at intradoc.server.Service.doCodeEx(Service.java:507)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
at intradoc.server.Service.executeActions(Service.java:433)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
at intradoc.server.Service.doRequest(Service.java:1707)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
Please help to resolve.
Thanks in advance
PrasadI also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad -
Error while updating phone button template in CUCM 8.6
Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
VivekI'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG -
Error while updating patch level 11 of HR
Dear All,
I am getting following error while updating HR patch level 11.
Phase OBJECTS_LOCKED_?: Objects Locked in Requests
Request Names of Locked Transport Objects
MRDK900089 LIMU REPS H99_POST_PAYMENT
LIMU REPS RPCIPE00
MRDK900542 R3TR FORM HR_IN_TAXF16000Y
the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
Object messages: R3TR CINS 01200615322 0000824666
Transport objects from package PCPO to target MRP only
Object messages: R3TR NOTE 0000970953
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
Transport objects from package PCPO to target MRP only
Object messages: LIMU REPS H99_POST_PAYMENT
Transport objects from package PCPO to target MRP only
Please help me how to rectify.
Thanks n regards
BhaskarHello Bhaskar,
is the transport already approved?
If not approve it and try it again. (also it is a local one)
If not check the objects and unlock them manually the following way:
SE03 => Unlock Objects (Expert Tool)
But if you approve your transport... the objects should be unlocked.
Regards
Stefan
Maybe you are looking for
-
Apple TV from Singapore to a US Version
we purchased and register our Apple TV in Singapore. Can we make it a US version as it has more options? Is that possible?
-
Hello Friends, I have to create some address for diffrent Business Partners. I was actually doing a BDC for this but am running with couple of issues. So i was wondering is there any FM or BAPI that could be of any help. Any suggestions would be help
-
I am running os x7.3 on mac mini with safari 5.1.4 safari will not open to my "home page"..... I set the prefs..... but it always opens to the last page I went to. How do i correct this.....
-
Strange Goings on with a date???
Hi, I have a loop that has a date and then for each time it goes around the loop it adds one week onto that date up to todays date and the displayed the date in a message box. Just to test my code I made the date for today 10/04/05, the date in the l
-
Desktop After Awakening with Yosemite
To Apple regarding Yosemite on my early 2011 MBP (15 inch): I sometimes sleep the computer by closing the lid. When I awaken the machine the screen is a spasmodic mix of colour and pixels (I am not getting this problem on my iMac or Mac Pro loaded wi