Getting CURL.cpp - Error?

Hi,
I updated to Mountain Lion and when using a audio converter, Sound Grinder 3.4.4, I get an error that reads as follows:
CURL.cpp - error "No URL" when getting Full Path, in getFolderFullPathAs CString0, line: 248
Can't find any thing regarding it so if someone can enlighten me of what this is and if there is a way to fix it I would appreciate it.
Thanks!

Funny I posted this and bang I figured it out. Seems Apple is getting as bad as PC's with their convoluted errors that make zero sense. Basically Sound Grinder's path to save a file, which was set in the preferences, was deleted by the new install. So once I told it where to save it was fine.
Thanks for the quick reply by the way!

Similar Messages

I am gettign objheap.cpp error

i had a cluster ( pretty large one ), i added few more controls to the cluster. when i tried to open the main vi where this custer is a contol in the FP, further the cluster is used for processing(updating , reading etc)in the code.
When i try to open the main vi with the modified cluster i get objheap.cpp error and the labview closes by itself when i press ok. What could be the reason for this problem.
Is there any precaution i need ahere to when working with large clusters.

Did you get a line number? That would go a long way to finding the reason for the error.
I believe that your VI has become corrupted due to the number of controls on your front panel. Not counting the controls in the clusters, how many objects do you have?
The following link points to another link that discusses the interal errors of LabVIEW. It might help.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000007510000&ECategory=LabVIEW.Datalogging+and+Supervisory+Control

Why getting NumericSupport.cpp(86) error?

I am upgrading a program from Labview 7.1 to Labview 2011. After calling a Graph, it begins to read data or plot (I can't figure out which one before it crashes), then crashes. Upon restart, I get the following error:
C:\builds\penguin\labview\components\mgcore\trunk\11.0\source\NumericSupport.cpp(86) : DAbort: ConvertNum called with non-numeric
$Id: //labview/components/mgcore/trunk/11.0/source/NumericSupport.cpp#3 $
See the attachments for more.
Any ideas to help? Thanks in advance.
John......
Attachments:
lvlog.txt ‏2 KB
1339d798-abd3-4859-bf7c-69d50d5ca1f8.txt ‏1 KB

John:
I don't know if you're still looking for a solution, but I just found one for a similar problem.
I was converting a program from LabView 8.2 to 2011 and kept getting the same crash you got when trying to read the Property Node of one of the graphs.
It turns out that Graphs in 8.2 have a different set of properties (X Scale range, min, max, flipped, format and precision, etc...).
I think the problem in my case was that Range used to be defined as Min, Max and Increment. It's now defined as Increment, Max, Min, Minor Increment and Start.
Trying to use the old property node to read the properties of the new chart caused an error because the data was not formatted as expected.
To fix this, I deleted the old property node, created a new one, read the new properties in their correct format and then bundled them together as they were before.
Works perfectly.

SUKeyCompare.cpp Error in OBIEE 11g

Hi All,
I am getting the below error for one of the report.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46008] Internal error: File server\Utility\Server\DataType\SUKeyCompare.cpp, line 880. (HY000)
If anyone has any clue, please let me know.
Thanks,
Soumitro

What is in report, any calculations?
I would say narrow down to a particular column, just delete a measure and execute the report if runs add it back and delete another etc.
Give some more info about the background of the report interms column expressions etc.

Windows LV6.0 running on Linux Wine: config.cpp error (line 404)

Have anyone tried to run LabView (Windows version) under Linux using the Wine "emulator"?
Trying this on Debian Woody, with a Win98 install of LabView 6.0 returns:
config.cpp error (line 404)
I tried to search for such a file on both Win/Linux partitions: there's none.
So how am i gonna check this line 404?
Any clue would be strongly welcome!

I agree with Labviewguru about getting Labview for Linux. The only
problem is that you have to dish out $2000 or $3500. They don't have a
Base package.
I'm not sure if NI recomends a particular window manager but I do know it
will run on any of them. In an extreme case I used it on a PII 233MHz,
64MB ram, and a 300 MB disk. It was a Slackware distro using the fvwm2
window manager. Ran great. Presently I run it with Gnome.
My point is that if you have to buy a LV for Linux license, at least you
can save money buy putting it on a machine that's been used as a paper
weight for several years.
-kevin
In article <[email protected]>,
"Labviewguru" wrote:
> I don't believe you can run LabVIEW in an e
mulation environment. There
> is too much system control that LabVIEW needs a handle on to be able to
> run on an emulator.
>
> The reason you are not able to find and troubleshoot that file is
> because it is part of the source code for LabVIEW, and doesn't exist
> except in a super secret vault which may or may not be located in Austin
> Texas...
>
> Are you aware that there is a version of LabVIEW for Linux? I believe
> that they recommend running KDE or similar GUI, but check on the support
> website for that at ni.com/linux.
>
> I hope that was enough of a clue...

Image.cpp error

When I try to print the labview panel & diagram on my new canpn pixma iP1000 printer I get the following message. I am using LV6.0
"image.cpp error" in line 11035. Please contact ni.com. Anyone can help!

hi labview 1958,
please look here:
Failure: image.cpp, line 11035 in LabVIEW 6.0
Greets!

Getting a compiler error

Hello All: I have some code provided to me by Adobe for building a selection suite. In the .FR I have this: AddIn { kIntegratorSuiteBoss, kInvalidClass, { IID_IMYSELECTIONSUITE, kMySelectionSuiteASBImpl, } }, AddIn { kLayoutSuiteBoss, kInvalidClass, { IID_IMYSELECTIONSUITE, kMySelectionSuiteCSBImpl, } }, Please assume that all definitions and declarations and PMIDs, etc., have been declared in the appropriate auxiliary files. I copied the files implementing the above verbatim into the project. This is how I instantiate the interface in the code: ISelectionManager* iSelMgr = ActiveContext -> GetContextSelection(); InterfacePtr<IMySelectionSuite> mySelectionSuite(iSelMgr, UseDefaultIID()); The problem is that when I compile the module, I get the following error message: C:\Program Files\Adobe\InDesignCSAndInCopyCSSDK\source\sdksamples\codesnippets\SnpTestSelectionSuite .cpp(178): error C2664: 'InterfacePtr<IFace>::InterfacePtr(const IPMUnknown *,PMIID)' : cannot convert parameter 1 from 'ISelectionManager *' to 'const IPMUnknown *' with [ IFace=IMySelectionSuite ] I can make this disappear by casting iSelMgr to type IPMUnknown, but somehow that doesn't feel right. As far as I can tell, I have the right headers included in the file. Anyone have any suggestions about how to resolve this error message without the ambiguity of using IPMUnknown?

Strizh:
That was a bonehead problem wasn't it? Sigh. Thanks for your solution.
R,
John

How do I stop .cpp errors on opening firefox

when I open firefox I get a series of message boxes as follows:
353 regWithoutKeyname.cpp
49 dfxpRecord.cpp
234 dfxpInit.cpp
65 dfxpUniversal.cpp
86 winmmDfx.cpp
The number is the title of the box and the text is the file name. An OK button appears in each box and once pressed the next box appears.
How do I stop this from occurring ?

'''How to stop Firefox startup .cpp error dialog windows''':
* 353 ..\..\UTIL\reg\regWithoutKeyname.cpp
* 49 .\dfxp\dfxpRecord.cpp
* 234 .\dfxp\dfxpInit.cpp
* 65 \dfxp\dfxpUniversal.cpp
* 86 .\winmmDfx.cpp
'''It has nothing to do really with Firefox or plug-ins!'''
It happens in safe-mode as well. I also experienced the same problem in IE.
'''It is an Audio related problem'''
To my astonishment I could not find an answer anywhere until I realized that once upon a time I had installed DFX Audio Enhancer!
'''You have most likely [http://www.fxsound.com/index.php?vendor=23&subvendor=1&plus=2&refer=dfx11 DFX Audio Enhancer] installed''' and corrupted. Possibly due to a a deep registry clean scan which removed some keys.
'''''Simply reinstall DFX Audio Enhancer and you problem is solved!'''''
Fire fox error messages

Getting Page Load Error while opening a Opportunity in new window

Hi All,
outbound SSO is enabled.
when i try to punch-in to my application from CRM through opportunity web link with Web Link Target as "open in custom tab" its working properly, but when i have Web Link Target as "open in new window" i am getting page load error. previously with out Outbounf SSO it is working properly.
Do i need enable any settings in CRM
thanks

when the web link target is "open in new window" or "open in current window" the request send to third party application from CRM ONDemand is HTTPS request as SSL is not enabled it is giving "page load error"(In the web link we are specifying http only) (User athentication type is "username & password/ SSO")
Is there any setting in CRM Ondemand to send Http request only instead of HTTPS?

Getting a permission error while updating a field.

hi,
I want to update a field in OIM and push the same to OID. When i try to update it for like 20 times it woks for 18 times and doesnt work for couple of times. I check the log and i get the below error.....
*Caused by: javax.ejb.AccessLocalException: [EJB:010160]Security Violation: User: 'xelsysadm' has insufficient permission to a*
ccess EJB: type=<ejb>, application=Xellerate, module=xlDataObjectBeans.jar, ejb=tcLookupOperations, method=create, methodInte
rface=LocalHome, signature={}.
at weblogic.ejb.container.internal.MethodDescriptor.checkMethodPermissionsLocal(MethodDescriptor.java:573)
at weblogic.ejb.container.internal.StatelessEJBLocalHome.create(StatelessEJBLocalHome.java:60)
at com.thortech.xl.ejb.beans.tcLookupOperations_u50o5o_LocalHomeImpl.create(tcLookupOperations_u50o5o_LocalHomeImpl.j
ava:70)
Kindly help me to fix this.
Thanks
thilak

http://bbs.archlinux.org/viewtopic.php?id=83076

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
 Screen: Illegal message
What happened?
 The current screen processing action was terminated since a situat
 occurred where the application could not continue.
 This is probably due to an error in the ABAP program or in the cur
 screen.
Error analysis
 The program attempted to issue a " " message during "Exit Command" processing.
 This is an illegal operation.
 The program was terminated.
 Screen name.............. "SAPMV45A"
 Screen number............ 4001
Trigger Location of Runtime Error
 Program SAPMV45A
 Include MV45AFZZ
 Row 370
 Module type (FORM)
 Module Name USEREXIT_SAVE_DOCUMENT
SourceCde
 message e001(zm) WITH text-335 ltab-kunnr text-334.
 else.
 if ktab-jkunnr <> ltab-kunnr.
 ktab-jkunnr = ltab-kunnr.
 jobsitecode = ltab-kunnr.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = jobsitecode
 IMPORTING
 output = jobsitecode.
 SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
 IF sy-subrc = 0.
 ktab-jname1 = kna1-name1.
 ktab-jstras = kna1-stras.
 ENDIF.
 chg_flg = 'X'.
 endif.
 endif.
 else.
 message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
* if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
* message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
* endif.
 custcode1 = ktab-ckunnr.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = custcode1
 IMPORTING
 output = custcode1.
 jobsitecode1 = ktab-jkunnr.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = jobsitecode1
 IMPORTING
 output = jobsitecode1.
 SELECT SINGLE * FROM knvp
 WHERE kunnr = custcode1
 AND vkorg = vbak-vkorg
 AND vtweg = vbak-vtweg
 AND spart = vbak-spart
 AND parvw = 'WE'
Error analysis
 The program attempted to issue a " " message during "Exit Command"
 This is an illegal operation.
 The program was terminated.
 Screen name.............. "SAPMV45A"
 Screen number............ 4001
Trigger Location of Runtime Error
 Program SAPMV45A
 Include MV45AFZZ
 Row 370
 Module type (FORM)
 Module Name USEREXIT_SAVE_DOCUMENT

Hi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

Getting Logon Failed error connecting to SAP R/3 with Crystal

I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin Scheeler

Hi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort

I am getting an activation error when trying to sign in to FAceTime

I am getting an activation error when trying to sign in to FAceTime

me too after upgrading into lion..

I am getting a U44M1P34 error when updating Photoshop CC (2014) and Bridge CC. All other CC apps update correctly.

I've uninstalled all my Creative Cloud applications including Creative Cloud itself and still I get the same error. Is there a work around?

Asybrandy to determine the exact cause of the update failure I would recommend reviewing your installation log files. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Getting CURL.cpp - Error?

Similar Messages

Maybe you are looking for