Getting error : End-of-central-directory signature not found.

HI,
while unzipping the patch we are getting the following error.
check the below error
bash-2.05$ unzip p4505133_10105_SOLARIS64.zip
Archive: p4505133_10105_SOLARIS64.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
***unzip: cannot find zipfile directory in one of p4505133_10105_SOLARIS64.zip or***
***p4505133_10105_SOLARIS64.zip.zip, and cannot find p4505133_10105_SOLARIS64.zip.ZIP, period.***

Kindly check if the zip file size both at the source and the destination are the same ...

Similar Messages

End-of-central-directory signature not found

I am in the process of configuring Grid on a Linux server (OEL 5)
i have the software onn the server as a zip file and i downloaded it through ftp in binary mode.
I am not able to extract it,below si the error..
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]# unzip GridControl_10.2.0.4_LINUX.zip
Archive: GridControl_10.2.0.4_LINUX.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: GridControl_10.2.0.4_LINUX.zip may be a plain executable, not an archive
unzip: cannot find zipfile directory in one of GridControl_10.2.0.4_LINUX.zip or
GridControl_10.2.0.4_LINUX.zip.zip, and cannot find GridControl_10.2.0.4_LINUX.zip.ZIP, period.
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]# file GridControl_10.2.0.4_LINUX.zip
GridControl_10.2.0.4_LINUX.zip: Zip archive data, at least v1.0 to extract
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]#
Please help !!
~Thanks

I think this is multi-part archive file. Basically, you have to put these files in one big file and unzip that file..
E.g you must have at least 2 zip files with ext a and b.. EG. for AIX platform there are 2 zip files in the downld zip files.
Step 1: cat p4547817_10202_AIX64-5L.zip.a p4547817_10202_AIX64-5L.zip.b > p4547817_10202_AIX64-5L.zip
Step 2: Make sure the checksum is correct as per the file howto.txt.
$ > /usr/bin/cksum p4547817_10202_AIX64-5L.zip
should produce output 3252003388 1319974395 p4547817_10202_AIX64-5L.zip
Step 3: unzip p4547817_10202_AIX64-5L.zip

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

HT1420 When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal.

Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found

After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Then another error message tells me: iTunes not installed correctly. Please reinstall. Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message. Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.

iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I am getting Error 2- Apple Application Support was not found

I completely uninstalled apple from my computer as previously suggested on this forum because I was getting error message 127 and missing some msi file and the itunes library would not open. I reinstalled iTunes from Apple's website and now I am getting Error 2 immediately after the install is completed and it's trying to open.
I have OS Windows 7 Home edition 32bit. I am the administrator.

See Troubleshooting issues with iTunes for Windows updates.
tt2

When sycning photos get error message: can't sync file not found

Trying to sync my wife's new 3gs to my macbook Pro. Never had any problems syncing my phone. With hers I can sync everything but photos. I get an error message saying can't sync file not found. I have no idea what file it is looking for or whether it is missing from the phone or my computer.

Thanks so much. The file path wasn't exactly the same as the link said, but it was close enough that I found it in a few minutes. Trashed the ipod cache as instructed, and now all my iphones and ipods have synced photos. Thanks again, would have never found that file on my own.

Getting error msg Server returned:AXLParser: 'maxy' not found in ENVELOPE

I get error message. Server returned:AXLParser:'Macy' not found in ENVELOPE
Cannot get graphics on Lincoln county GIS. Please advise

It's a server error. Nothing to do with your computer.

Getting error while export folder: ScriptTemplate [6] not found

Hi,
I am trying to do a weekly refresh in IOP. As part of the script I take a backup of export folder and generate a new export folder. While taking a backup of export folder, job is failing while exporting user preferences.
2011-06-21 00:02:00,626 [ExecuteCommand] MigrateExporter INFO - Exporting users to D:\bsm\IT_Big\export\migration\data\users.csv
2011-06-21 00:02:00,704 [ExecuteCommand] MigrateExporter INFO - Exporting user acls to file D:\bsm\IT_Big\export\migration\model\acls.xml
2011-06-21 00:02:01,562 [ExecuteCommand] Request ERROR - ISException processing request [execute]
com.interlacesystems.util.ObjectDNEException: ScriptTemplate [6] not found
Please let us know if any idea.
Thanks

Hi,
I am trying to do a weekly refresh in IOP. As part of the script I take a backup of export folder and generate a new export folder. While taking a backup of export folder, job is failing while exporting user preferences.
2011-06-21 00:02:00,626 [ExecuteCommand] MigrateExporter INFO - Exporting users to D:\bsm\IT_Big\export\migration\data\users.csv
2011-06-21 00:02:00,704 [ExecuteCommand] MigrateExporter INFO - Exporting user acls to file D:\bsm\IT_Big\export\migration\model\acls.xml
2011-06-21 00:02:01,562 [ExecuteCommand] Request ERROR - ISException processing request [execute]
com.interlacesystems.util.ObjectDNEException: ScriptTemplate [6] not found
Please let us know if any idea.
Thanks

I keep getting error message "AppleSyncNotifier.exe - Entry Point Not Found" every time I start up my computer. How can I fix this

I recieve this message every time I start my computer, AppleSyncNotifier.exe - Entry Point Not Found. How can I fix this?

No problem.
You can either get it via Apple Software Update ("Start > All Programs > Apple Software Update" ... it'll appear in the "New programs" section) or by downloading an installer from the following page on the Apple Website:
http://support.apple.com/kb/DL769

I keep getting "error 404 the requested URL was not found on the server. Thats all we know" message. Any idea how I can fix?

I have tried to reset firefox and I have attempted to disable all my extensions, but keep getting this error message half the time i try to click on a new link. Any help?? Thanks!!

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

TS1436 keep getting the error message saying " cd/dvd software not found". How do I fix this!?

When trying to burn my playlist, I keep getting error message saying cd/dvd software not found.. I've tried uninstalling and installing itunes over and over.. and I still get the same message . I can burn in Windows media player but not in itunes. Please help!

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

I'm getting the error msg "apple application support was not found. Apple application support is required to run itunes. error 2. How can i fix this?

Hi, I was running itunes software just fine. I got some malware and unintalled everything that was from apple. Now, I reinstalled itunes but can't run it because I get the msg "Apple application support was not found. Apple application support is required to run itunes. Error msg 2.
What can I do to fix this?
Thank you.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?

Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

Getting error : End-of-central-directory signature not found.

Similar Messages

Maybe you are looking for