Getting error for migo_gr against po
Hi ,
When i try to do gr of serialized material against Po for movt 101 I get dump SAPSQL_ARRAY_INSERT_DUPREC .exception CX_SY_OPEN_SQL_DB .
An exception occurred that is explained in detail below :
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "SERIALNUMBER_POST" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Cany Anyone help me with this .
I have already checked that the serial number i am entering at the time of gr is unused one .
Thanks and Regards ,
Shikha
Hi,
This short dump is normally caused by the fact that the internal number
range is complete.
Check your serial number range intervals in the customizing
transaction OIEN and compare it against the transaction SE16 for the
table EQUI.
If the relevant number range is already completed, then the system
starts counting from the beginning again, resulting in duplicate
database records.
Also check whether this is your case and, if so, please, use the
customizing transaction OIEN and reset these number range to a higher
value.
I hope this helps.
Regards,
Ashwini.
Similar Messages
-
Getting error in Migo_gr
Hi EveryOne ,
I m getting error in Migo_gr that : " Field Bus. Area is a required field for G/L account DMRC 141004 " .
The bus arear is not visible in Migo_gr .
thanksHi,
Check business area is mandatory for your G/L 141004 (FS00) by checking field status group.
Check the G/L 141004
1. Use t.code: FS00, enter G/L account 141004 & company code and check Filed Status Group inin Create/bank/Interest TAB
2. Use t.code: OBC4, check the Filed Status Group
3. Go to u201CAdditional account assignmentsu201D segment and put optional entry of business area and save.
Now try your MIGO _GR transaction
Regards,
Biju K -
I would like to combine my word files to a pdf and i get errors for pdfmaker
i would like to combine my word files to a pdf and i get errors for pdfmaker
is it 32 bit or 64 bit. you can check it by following the steps mentioned below
In the program in which you want to verify the version, click the Microsoft Office Button, and then click Program_Name Options.
Click Resources, and then click About.
To locate the About Microsoft Program_Name dialog box in programs that do not use the Ribbon user interface, click About on the Help menu.
Thanks,
Vikrantt Singh -
Getting Errors for not Connected to Internet
Okay, so this happens with any program that I download that has to connect to a server, (Like Google Chrome), and Adobe. Please help me. I am really sad When I try downloading anything it gives me an error saying please, have an internet connection. I disable windows firewall, and no luck! This happened before all my anti-virus! Please help me! I am going to cry Please please please! If you help me, I will be very very very happy! I get errors for Im not connected to internet
What Adobe product are you trying to download? Where exactly are you receiving this error message?
-
Getting Error for Install of Prerequisite Components in 64 bit operating system
we have generated our .exe file by adding prerequisite in setup project and prerequisite (sql server 2005 Express
sp2 (x86)) works for windows xp. But we are facing an issue while we install prerequisite (sql server 2005 Express sp2 (x86)) not working in windows 7 64 bit and 32 bit operating system. We have added prerequisite (sql server 2005 Express sp2 (x86))
using visual studio 2010.While we install prerequisite (sql server 2005 Express sp2 (x86)) in windows 7 we getting error like " Prerequisite check for system component SQL Server 2005 Express Edition SP2 (x86) failed with the following error message:
"This version of SQL Server 2005 Express Edition (x86) is not supported for the current processor architecture."
See the setup log file located at 'C:\Users\BS-90\AppData\Local\Temp\VSDCFFC.tmp\install.log' for more information.
". We need only sql server 2005 express edition to be installed but not sql server 2008 express edition to be
placed as prerequisite for our application because our .mdf file supports sql server 2005 express edition only.Hello Zhang,
As per your reply here is my summary fallows as:
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Professional Service Pack 1 (Build 7601)
Time : Mon Nov 10 14:55:46 2014
BS-90-PC : The feature(s) specified are not valid for this edition of SQL Server.
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
Time : Mon Nov 10 14:55:50 2014
List of log files:
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Core(Local).log
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Datastore.xml
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_.NET Framework 2.0.log
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Support.log
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_Core.log
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_BS-60-PC_SCC.log
And Detail Logs fallows as:
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.1.1 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package 'SQL Server 2005 Express Edition SP2 (x86)', phase BuildList
Running external check with command 'C:\Users\BS-90\AppData\Local\Temp\VSDCFFC.tmp\SqlExpress\SqlExpressChk.exe' and parameters ''
Process exited with code 1
Setting value '1 {int}' for property 'SQLExpressInstalled'
The following properties have been set for package 'SQL Server 2005 Express Edition SP2 (x86)':
Property: [SQLExpressInstalled] = 1 {int}
Running checks for command 'SqlExpress\sqlexpr32.exe'
Result of running operator 'ValueEqualTo' on property 'SQLExpressInstalled' and value '0': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionNT' and value '5.1': true
Result of checks for command 'SqlExpress\sqlexpr32.exe' is 'Bypass'
Running checks for command 'SqlExpress\sqlexpr32.exe'
Result of running operator 'ValueEqualTo' on property 'SQLExpressInstalled' and value '0': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of running operator 'ValueExists' on property 'Version9x': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel': true
Result of checks for command 'SqlExpress\sqlexpr32.exe' is 'Fail'
'SQL Server 2005 Express Edition SP2 (x86)' RunCheck result: Fail
A prerequisite failed for Package "SQL Server 2005 Express Edition SP2 (x86)"
Package failed with message "This version of SQL Server 2005 Express Edition (x86) is not supported for the current processor architecture." -
Dashboard Prompt - Getting error for Adding SQL query in "Default to"
Hello Oracle,
I am facing some problem in Dashboard Prompt. Like when i add some sql query in "Default to" in Dashboard prompt and for the next prompt when i check for Contrain option i get error in the second prompt. but it works fine when i hard-code a value in "Default to" options.
For Example:
Like when we consider a two prompts :
1) Year -> (In Default to i select SQL Query and enter the query as SELECT "YTD Dim"."Fiscal Year" FROM "YTD Report" WHERE "YTD Dim"."Fiscal Year" = Year(Current_Date)
2) Business Unit -> (In specific value i give as some hard code value of Business Unit and check the contrain option)
i get error as
Business Unit
Error Generating Drop Down Values
A numeric value was expected (received "SELECT "YTD Dim"."Fiscal Year" FROM "YTD Report" WHERE "YTD Dim"."Fiscal Year" = Year(Current_Date)"). Error Details
Error Codes: EHWH2A7E
but i get correct value for Year as 2011.
I need to use SQL query in default to option and need to check the constrain option too.
Looking for positive feedback.You need to create a dashboard prompt and in Default To -> select SQL Results
Click on the ... (three dots ) underneath it and put in your sql
For Example , I have a Table called "Sales Date" in my "ABC" presentation folder. This has a column called "Year" and "Date". If I want to have a Year prompt with the default value set to current year, here is what the syntax of my sql result will be :-
SELECT "ABC"."Sales Date".YEAR
FROM "ABC"
WHERE "Date" = current_date
In SQL, we cannot put SQL as we know of in terms of Oracle, Sql Server etc. The SQL here refers to sql as OBIEE understands it and should be in the form of Select "Presentation foler"."Table Name".ColumnName from "Presentation Folder"
Hope this helps -
Getting error for classpath setting during compilation
Hi,
I tried sampel code of SchematronValidation bpel sample code from oracle site.But while compiling the code,I am getting following error:
Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "SchematronValdiationProcess" of composite "default/SchematronValidation!1.0"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
Plz help me on this to resolve!!!
Regards,
Deb
Edited by: DevD on Jun 30, 2011 2:40 PMHi Yatan,
Thanks for your inputs.
I have added BPM-Workflow class file in project properties.Now SOA-BUILD successful,but while deploying to server I am getting error:
Error during deployment: Deployment Failed: Error occurred during deployment of component: SchematronValdiationProcess to service engine: implementation.bpel, for composite: SchematronValidation: ORABPEL-01005
Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "SchematronValdiationProcess" of composite "default/SchematronValidation!1.0*soa_1272dcc8-82cf-4306-b31f-7aacd0be61cb"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
[05:10:15 PM] Check server log for more details.
[05:10:15 PM] Error deploying archive sca_SchematronValidation_rev1.0.jar to partition "default" on server soa_server1 [10.185.51.136:8001]
[05:10:15 PM] #### Deployment incomplete. ####
[05:10:15 PM] Error deploying archive file:/C:/JDeveloper/mywork/GM_POC/SchematronValidation/deploy/sca_SchematronValidation_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Plese help me on this!
Regards,
Deb -
Getting error for input string 0000 #
Hi ,
I am getting error on the portal that has an exception as error occured for For input string: "0000 #" .I think its because of some problem with the RFC that m getting this error but please suggest.The code done with dynamic coding is given below:
for(int j=0; j<intList; j++)
IDynamicNodeElement dynObj = wdContext.createDynamicNodeElement();
strLine = wdContext.nodeWeb_Table_Disp1_Out().getWeb_Table_Disp1_OutElementAt(j).getTline();
intLine = strLine.length();
strLine = strLine.substring(1,intLine-1);
String[] strArr = strLine.split("#");
for(int k=0;k<intCat;k++)
String strVal = strArr[k];
if(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getDatatype().equalsIgnoreCase("DATE"))
try
String strdate ="";
SimpleDateFormat ch1 = new SimpleDateFormat("yyyyMMdd");
//wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess(wdContext.currentUser_ProfileElement().getDatefmt()+strVal);
String strFmt = "";
if("YYYY/MM/DD".equalsIgnoreCase(wdContext.currentUser_ProfileElement().getDatefmt()))
strFmt = "yyyy/MM/dd";
else
strFmt = "MM/dd/yyyy";
SimpleDateFormat ch2 = new SimpleDateFormat(strFmt);
strVal = strVal.trim();
if(!"".equals(strVal))
strdate = ch2.format(ch1.parse(strVal));
} dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),strdate);
catch(Exception e)
else if(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getDatatype().equalsIgnoreCase("QUAN"))
Double dblVal = null;
DecimalFormat sdf = new DecimalFormat("#,###.####");
dblVal = new Double(strVal);
if(!strVal.matches("(?i).-."))
dblVal = new Double(strVal);
dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),new BigDecimal(strVal.trim()));
else
dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),null);
else
dynObj.setAttributeValue(wdContext.nodeField_Catalog_Disp1_Out().getField_Catalog_Disp1_OutElementAt(k).getFieldname(),strVal);
col.add(dynObj);
wdContext.nodeDynamicNode().bind(col);
Please help.
Thanks & Regards,
Reinuka.I guess the reason for the exception is the "date format" and conversions. Try something like this.
SimpleDateFormat sdf = new SimpleDateFormat("date format you want");
java.util.Date asDate = sdf .parse(codes.getString("your date value").trim());
node element to which you want to set the date value.setfieldname(asDate.getTime());
Example:
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd");
java.util.Date asDate = sdf .parse(codes.getString("DELIV_DATE").trim());
outboundpr.setDel_date(asDate.getTime()); -
Getting error for bind variables
Hello Experts ;
SQL> DECLARE
2 l_eid number;
3 l_name varchar2(30);
4 BEGIN
5 l_eid:=1000;
6 select name into l_name from tab1 where no = l_eid;
7 l_eid:=9999;
8 select name into l_name from tab1 where no = l_eid;
9 l_eid:=299999;
10 select name into l_name from tab1 where no = l_eid;
11* END;
PL/SQL procedure successfully completed.
when creating bind variables i am getting error :
SQL> variable b1 number;
SQL> exec :b1 :='select name from tab1 where no = :b1';
BEGIN :b1 :='select name from tab1 where no = :b1'; END;
* ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 1@ SY
SolomonYakobson wrote:
You need to explain "method not workable for me". I have no idea what method you are talking about and what are you trying to achieve.
SY.
SQL>DECLARE
v_value number;
v_dispaly varchar2(30);
BEGIN
v_value :=100000;
select name into v_display from tab1 where no = :v_value;
DBMS_OUTPUT.PUT_LINE(v_display);
v_value :=20000;
select name into v_display from tab1 where no = :v_value;
DBMS_OUTPUT.PUT_LINE(v_display);
v_value :=250000;
select name into v_display from tab1 where no = :v_value;
DBMS_OUTPUT.PUT_LINE(v_display);
* END;
RS>/
PL/SQL procedure successfully completed.
>> This is not workable for me , Here getting error >>
SQL> DECLARE
2 variable b1 number;
3 exec :b1;
4 BEGIN
5 select name from tab1 where no =: b1;
6* END;
RS>/
variable b1 number;
ERROR at line 2:
ORA-06550: line 2, column 13:
PLS-00103: Encountered the symbol "NUMBER" when expecting one of the following:
:= . ( @ % ; not null range default character
Thanks ! -
Hi,
am using database version
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
and when I run below command,
select e.empname from emp as e;
am getting error
ORA-00933 SQL Command not properly ended,
but this is allowed right? I mean we can give alias name by using as or whitespace,
Can any one please comment on this,
Thanks,NSK2KSN wrote:
Hi,
am using database version
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
and when I run below command,
select e.empname from emp as e;
am getting error
ORA-00933 SQL Command not properly ended,
but this is allowed right? I mean we can give alias name by using as or whitespace,
Can any one please comment on this,
Thanks,Column aliases can use the optional "as" keyword.
Table aliases must not use the "as" keyword.
select e.empname from emp e; -
AJRW getting error for fiscal year 2015
Hi Expert, while doing AJRW getting error
see the screen shot below.
Kind regards
Pranav Kr. GuptaHi Pranav,
In AJRW transaction please check the "Error Log" what is exactly it is mentioned over it.
Plus I would also suggest to execute Transaction OAAQ & OAAR to check the Years that are closed.
Also execute AJAB T. code in Production Run first and then execute AJRW.
Thanks.
BR, Jaymin -
The Software Update log has:
Tue Oct 22 03:01:16 XXX swupd_syncd[4534] <Error>: *** Product ID: "091-7360"; file URL: "http://swcdn.apple.com/content/downloads/35/57/091-7360/ise9pfxzzwi10qx4c2bygqf9llmcch6axd/JavaForMacOSX10.6.dst/091-7360.pt_PT.dist"[...]Tue Oct 22 03:01:17 XXX swupd_syncd[4534] <Info>: Finished downloading product: 091-7360Tue Oct 22 07:06:30 XXX swupd_syncd[15676] <Warning>: ignored invalid download request for product 091-7360, current state = PleaseMirror
There was http://support.apple.com/kb/TS3127?viewlocale=en_US&locale=en_US -- similar symptions fixed by the 10.6.3 update, but by now I'm at 10.6.8.Unfortunately, I don't have an answer for you, but at least we can comiserate about the problem. I have 3 different 10.6 SUS installations that are having this problem. I've been trying to directly manipulate the downloaded files, settings, etc. I'm seeing that the downloaded files here:
/var/db/swupd/html/content/downloads/35/57/091-7360/
do not have any of the ".dst" distribution files for the various languages that should be there. I believe that must be the "incomplete download" part, but I've even copied those files from a 10.5 SUS download (all of the 10.5 SUS engines work w/ this Java update, BTW), still to no avail.
I've also tried manipulating the list of updates in the .plist here:
/etc/swupd/com.apple.server.swupdate.plist
by changing the flags for 091-7360 to "Mirrored" instead of "PleaseMirror", changing Enabled to "true", and things like that. I still cannot get SUS to be happy w/ this update. I think that if I had a better understanding of how all of these files tie together (you've got lists of updates in /etc/swupd, but also multiple catalog files in /var/db/swupd/html), I might be able to fool the thing into working. Alas, it appears to be beyond me, and I may have to just wait until another Java update for 10.6 is issued to be able to use SUS for it again.
Any further observations you may have would be quite welcome. Maybe we can put our heads together and figure this out.
Thx,
Fred -
Getting error for the Array : help
Hi i have written following code and getting this error
String srcdir = new String("C:\\projects\\xml\\rwjf-org\\closedgrants\\finalxml\\grr\\");
File fileDir = new File(srcdir);
String[] fileList = new String[100];
fileList = fileDir.list();
for(int i=0; fileList.length>0; i++){
String currFile = srcdir + fileList;
//String fname = new String(fileList[i]);
System.out.print("String file name is " + currFile);
//System.out.print("file name is " + fileList[i]);
ERROR : java.lang.ArrayIndexOutOfBoundsException
I'm new to java.
Please tell me where i'm going wrong.
any help would be great.
PoojaHi i have written following code and getting this
error
String srcdir = new
w
String("C:\\projects\\xml\\rwjf-org\\closedgrants\\fina
xml\\grr\\");
File fileDir = new File(srcdir);
String[] fileList = new String[100];
fileList = fileDir.list();If you are not after limiting the number of files returned, change the previous two lines to this one line (then, you will get all files/subdirs contained within the srcdir):
String[] fileList = fileDir.list();
for(int i=0; fileList.length>0; i++){And, as another poster mentioned, change your first line of the for loop to this:
for (int i = 0; i < fileList.length; i++)
HTH,
Mike Kares
String currFile = srcdir + fileList;
//String fname = new String(fileList[i]);
System.out.print("String file name is " +
is " + currFile);
//System.out.print("file name is " +
is " + fileList[i]);
ERROR : java.lang.ArrayIndexOutOfBoundsException
I'm new to java.
Please tell me where i'm going wrong.
any help would be great.
Pooja -
New update of Quicktime gets error for mp4 file
So I have a video file in .mp4 format and I all the other video player such as Mplayer extend and VLC all work with mp4 but quicktime however i like to watch all my .mp4 in Quicktime and i thought it was a file error however i believe it's a quicktime update error so all your mp4 file you had before probably gets an invalid sample description error..... so can some one help me out i still got to watch the file but i would like to use my Quicktime pro because i have it and if it just not doing anything i want to delete but I can't because it apart of mac's so i would like something done by the support team or something...........
From where did you get this "mp4" file? From what site, or what application generated it? Did it ever play in QuickTime Player? QuickTime can play standard MPEG-4 files, but there are other applications that generate non-standard files but still use the .mp4 extension (Microsoft, for once) and those QuickTime will not be able to play without third-party codecs such as Perian. If you had Perian before, you may need to update or reinstall.
BTW, it makes it a lot easier to read your posts if you use proper punctuation and capitalization. I don't mean to be giving English lessons here, but it helps if you make your posts as easy to read as possible.
Regards. -
Getting error for opening shopping cart after deleting user fron org struct
Hi Experts
I am getting dump user attribute not maintained after deleting user assignment from org structure.
what can i do to retain old status. or atleas wants to avoid getting this dump ..while displaying this SC.
pl provide any solution
Regards
Nilesh,It is never a good idea to just delete a user assignment. What I find is that people just go on deleting assignments without considering the consequences. And later on it gives a lot of trouble to correct errors.
So never delete an assignment, but give it an end date (it's there for a reason!).
On to your problem: as said by someone else, get the user/business partner back into the organisational model (doesn't matter where actually) and there won't be an error. Try first with ppoma_bbp, if that doesn't work use pp01 - use pp01 with care and know exactly what you want to achieve else you'll end up creating a bigger mess than you started with.
If you have deleted the business partner completely you will have to update the database by hand hacking tables (a big reason never to delete a bp you are not entirely sure about).
Regards,
Robin
Maybe you are looking for
-
Questions about using Styles Window for formatting a book in Apple Works.
Help says "You can create your own styles in any document type." Not clear on how to do that. I wish to have one Style or group of Styles associated with one document of say 500 pages for a book. Each chapter Heading. as a single column layout, is se
-
IDOC number update in processing log
Hi My problem is when I run VL02N, although it updates the NAST table with a record dynamically , it does not update NAST-CMFPNR field, hence I cannot find the updated idoc number in the processing log acceding to NAST-OBJKY.It was showing previuos
-
Regarding Exception handling in Coherence
Hi , I am using c++ to connecting coherence try{ String::Handle gridHandleCache = GridCacheName; if(hCommCache == NULL) { hCommCache = CacheFactory::getCache(gridHandleCache); else { //cout<<"Info :"<<GridCacheName<<" Cache Already in Active State "
-
Blocked Plug-in with current Flash player. *** am I doing wrong?
I am student and cant open any of my work on my computer currently because it says blocked plug-in. I have a Mac book Pro with the Mac OS X verion 10.6.8 Processor 2.53 GHz Intel Core 2 duo Memory 4 GB 1067 MHz DDR3. im not sure what else i need to p
-
Does anyone know what this is please? Quite infuriating as I'm on deadline - happened suddenly between working late yesterday and this morning. Please advise on any information I can provide for help. Thanks in advance! X