Getting error message "dyld: unknown required load demand 0x80000022" with multiple applications.

When using programs such as Evom I keep getting this error message:
"Failed. dyld: unkown required load demand 0x80000022"
How do I fix this?

You should contact the developer of this application. Only the developer can fix this. The application was incorrectly built on a OS X 10.6 machine for a OS X 10.5 machine. The developer can fix this by considering three things:
Using the correct compiler parameters:
gcc-4.2 -mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk ...
Using the correct linker settings (setting environment variable before link command). This is required, so that the OS X 10.6 linker will not use the loader command 'LC_DYLD_INFO_ONLY' (=0x80000022), because OS X 10.5 does not understand this command:
export MACOSX_DEPLOYMENT_TARGET=10.5
(or   setenv MACOSX_DEPLOYMENT_TARGET=10.5)
After this is fixed, one can check if the application was correctly built for OS X 10.5 by running 'otool':
otool -l binary
The correct binary should not contain any  'LC_DYLD_INFO_ONLY' load commands (only 'LC_DYLD_INFO' commands).
(also see my blog article http://grauonline.de/wordpress/?p=71 )

Similar Messages

  • I am trying to create a new profile, but I cannot open profile manager in Mac OS 10.5.8. I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".

    Hello,
    I am trying to repair my Firefox profile, but I cannot open profile manager in Mac OS 10.5.8. When I follow the directions for opening profile manager in my Terminal utility, I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".
    At this point, Firefox (v 5.0 or previous versions), is not running.
    Thanks.

    [http://asqueella.blogspot.com/2010/12/dyld-unknown-required-load-command.html Here's an Explanation]. Basically you need to add "arch -i386 " at the beginning of the command because 10.5 is 32-bit only and more recent versions of Firefox default to 64-bit.

  • When I try to go to the profile manager, the Mac Terminal says this: "dyld: unknown required load command 0x80000022" and I don't know what that means!

    Firefox has been acting up lately, so I was going to create a new profile and copy over some stuff from the old one to the new one. I followed the instructions on the troubleshooting page, but when I tried to type in /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager, the Terminal says dyld:unknown required load command 0x80000022. I know Firefox is closed, so I have no idea what's going on. Please help!

    add "arch -i386 " at the beginning of the command
    See http://support.mozilla.com/en-US/questions/838031

  • After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly. I have repeatedly removed and reinstalled Itunes and still have the same problem!!!

    After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
    I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. It appears that I am not the only one with this issue. what is wrong with the latest update?? I tried removing Itunes and all of its components and installing it again, but get same errors and i have also tried doing a system restore with the same results

    Doublechecking. Have you also tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly

    After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
    I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly.
    Tried removing Itunes and installing again, but get same errors

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

    I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • What's up with "Unknown required load command 0x80000022"?

    Hi all.
    I have an FCP plug-in that was built on a 10.6.4 system and runs fine there, but fails to load under 10.5.8 with the following:
    Error loading /Library/Application Support/blahblah: dlopen(the path, 265):no suitable image found. Did find: (the path): Unknown required load command 0x80000022
    There was another thread on this error with a post from this month that has inexplicably been archived. Does anybody have some insight on this?
    Thanks!

    add "arch -i386 " at the beginning of the command
    See http://support.mozilla.com/en-US/questions/838031

  • Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Upgrade from 3.6.2 to 3.6.3 get error message. 1.92.2 not compatible with mini ver. =1.9.2.3 max ver

    When Upgrading From Ver.3.6.2 To Ver 3.6.3, Get error message (Platform Ver 1.9.2.2 Not Compatible With miniversion>=1.9.2.3
    maxVersion

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • TS1702 I keep getting error message number 0x800B010F when I try to update my applications

    Whenever i try to update my iphone applications from the itunes program i get error message 0x800B010F. How do I fix this?

    Hbauer60 wrote:
    ...  How do I get around this?
    You cannot.
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Keep getting error message access denied then already a project with that

    name saved.
    I don't understand why this is happening now, I have done this stuff many times before and NOW I am getting this message over and over! I am trying to start a new project and I keep getting that message. (it also says there is already a project using that name that I am trying to save it as. I have tried rebooting and shutting down FCE to no avail. I can't render anything because I guess I am NOT allowed access to my own project. Does anyone know how to resolve this? I have an external drive that my scratch settings are set to. They are still there and the message is STILL bouncing up.
    Thanks in advance
    ruez

    The other error message reads "there is already a project with that name", when I try to save it. Then it saves it as a copy, then the next time it is saved as a copy copy. I don't get it! I am doing just what I have always done and now this?
    When you say 'drives' what are you referring to exactly? How would I trash my preferences? Where would I check permission on my drives?
    Thanks Tom, as I am sitting here that little FCE icon is flashing me already to tell me Autosave: A file of this name already exists. When I click ok, Autosave comes back with access denied.
    Thanks for all your help!!
    ruez

  • Getting error message in iCloud - cannot load iWork, Getting error message in iCloud - cannot load iWork

    Anyone else having this problem ... logged into iCloud from MBP, hit iWork icon and get the error message:
       "Cannot load iWork"
    Any information would be great.
    Thanks

    I take it we're all seeing something that looks like:
    ...and maybe a corresponding:
    Grrrr...At least it inspired me to write a blog post - "iCloud Users Experience iWork Outage"

  • Suddenly iTunes doesn´t work. Trying to reinstall I get error messages: "R6034 attempt to load C runtime library incorrectly", "Cannot start Apple Mobile device", "Not installed correctly Error7 (Windows error 1114)". What to do?

    Suddenly iTunes didn´t function. Trying to reinstall Ifirst tried to delete the program and all iTunes files, but ITunes Helper could not be deleted. After installation (with anti virus disconnected) the following error messages come up: "MS Visual C++ Runtime Library R6034 - attempt to load C routine library incorrectly", "Cannot start Apple Mobile Device", "Not correctly installed. Error 7 (windows error 1114" What to do?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Loaded the newest IOS and I get error message when trying to load I messaging and Facetime.

    I have an Ipad mini 2 and I downloaded the software update  IOS 8.1.3. Now when I try to use facetime and I-messaging it gives me an error message : (An error occurred during activation. Try again.)
    I have tried turning the applications on and off, I have turned off the I pad and restarted it. I made sure I was on the Wi-Fi. I even made sure the date and time zone were correct. None of these things have made any difference.
    Does anyone have a fix for this problem. Is there a way to reload the last IOS update? Any help would be appreciated.
    Peter

    Hey Peter Manring,
    It is my understanding that you are receiving an activation error when attempting to use FaceTime or iMessage. I have an article that should be able to help you address this issue, and it can be found below:
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    http://support.apple.com/en-us/HT201422
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I get error message when try to load new download firefox 4 for mac x==says i dont have permission???

    i get this message--
    The operation can’t be completed because you don’t have permission to access some of the items.

    Trash your older version and do a new install with the newer version problem solved

Maybe you are looking for

  • Please help me with vaults!

    I have 2 quick questions: When I export individual projects into an external hard drive, there is an option that says "consolidate images into exported project." The manual said something about referenced masters. What does this mean? Are referenced

  • WL 9.2 won't start due to "No READ permission for key" error

    I'm getting this error on startup, and it's preventing a successful start. Application will not run. I've read that this happens on initial startup, and to "just re-start it". That does not work. Also, I've made sure that failure-is-fatal property in

  • Update of SD Documents after Change in Risk category

    Dear Friends, I have a situation in Credit Management. Initially when the Customer master was set up, this customer was set as Risk category "New" to which the credit limit maintained is 1 USD. This customer is having now some Open Orders, Open Sched

  • RAW Camera support for Canon EOS 500D?

    I just bought the Canon EOS 500D and now Aperture returns an "unsupported image format" when I shoot in RAW. I have the latest RAWCameraUpdate.pkg with version 2.5. Still nothing. Help!?

  • JSP- HTML- Microsoft Word or PDF

    Hello I have an application thats generates a text that are shown for the user in the Webbbrowser. I wonder if there is a way to generate a Word document or PDF from this HTML output that the user could download by clicking a link? Thanks for helping