Getting error notifications about payment every month

I get repeatedly notifications about payment information and finally the payment succeeds without changing even the information. Anyway the system doesn't accept correct address information and suggests abbreviated forms of billing address. The problem doesn't seem to be independent about the credit card used because I have tried four different cards.
Yesterday I got once again error notification about payment (Action requirement: ...payment is past due). I the night I got "Thank you for your order" and payment confirmation and today again notification about the payment error.
I don't know how to correct the information to make this work.

tero ylonen, John is correct as you need to contact Adobe Support to get this corrected however I checked & found that you or your bank might have laid a restriction in making the payment for this Adobe product.
Regards
Rajshree

Similar Messages

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Want to get the 25th day of every month Date Function

Dear All,
i want want to get the 25th day of every month
like.
select sysdate from dua.
Regards

i want want to get the 25th day of every month By saying 'day', do you mean days like - Sunday, Monday, etc.?
Why I'm in doubt is 25th of every month will always be 25 like '25-Jan', '25-Feb', '25-Mar', etc...
In case you need the other way -
SELECT
            ADD_MONTHS (
                        TRUNC (TO_DATE (SYSDATE), 'YEAR'), LEVEL - 1
                        ) + 24,
            TO_CHAR (
                ADD_MONTHS (
                        TRUNC (TO_DATE (SYSDATE), 'YEAR'), LEVEL - 1
                        ) + 24
                , 'DAY')
      FROM DUAL
CONNECT BY LEVEL <= 12;Output:
25-Jan-2013     FRIDAY
25-Feb-2013     MONDAY
25-Mar-2013     MONDAY
25-Apr-2013     THURSDAY
25-May-2013     SATURDAY
25-Jun-2013     TUESDAY
25-Jul-2013     THURSDAY
25-Aug-2013     SUNDAY
25-Sep-2013     WEDNESDAY
25-Oct-2013     FRIDAY
25-Nov-2013     MONDAY
25-Dec-2013     WEDNESDAY

Property Bee not working properly keep getting error messages about post codes

Every time I open a new page on Rightmove I get an error message about post codes

If you use a bookmark to reach specific pages then try to start with the main (home) page of the website and navigate from that main page to those bookmarked pages in case the bookmarks are no longer working.

In F110 I getting error No valid Payment method found but i did

While doing intercompany clearance using Pay methd Y in F110 payment run in payment proposal system showing error "No valid payment method found" this is showing in vendor line item and if i am clicking customer line item showing debit bal still exit because system not picking my pay mthd Y in vendor line item which one i assigned in vendor master data. But for another vendor its posting clearing this error occur only for particular vendor. Any can help me to rectify my error.

Hello,
We were get the same error message and found that the solution was that the vendor must have an address.
In OBVU, Payment method / country, the required master record specs had Street checked on. This reqiured an address for the vendor. Once we entered an address the F110 payment run was successful for this vendor.
Rgds,
Dan

Getting error in each and every scenario

Hi,
I am getting Error as "HTTP response contains status code 503 with the description service unavailable" at SXMB_MONI in each every scenario like
FIle to File,
FIle to IDOC and vice versa,
IDOC to JMS and vice versa,
File to JDBC,
HTTP to IDOC,
JMS to JDBC,
RFC to SOAP etc.
Earlier the above scenarios all are working fine.i.e without any Error.
Can any body help me to resolve this problem.
Regards
Sridhar Raju Mahali

hi sridhar..
got design.. -> tools -> transfer from SLD -> import s/w component version...
and import the below 2 components
SAP J2EE ENGINE 6.40 sap.com SAP-JEE 6.40 01200615320200006685
SAP BASIS 6.40 sap.com SAP_BASIS 640 01200615320200005507
if imported, re-import....
hit the fulll cache refresh then ..and restart ur IR ID...
( confirm with ur basis guys, how to go abt)
regards..
vishal

I am getting error code 50 almost every day

Almost every time I want to move a photo from my desktop to a file, I get error code 50. The computer has to be turned off to fix it. Why would I be getting this error code and how can I fix it.

Hi Evelyn,
paramErr
= -50, /*error in user parameter list*/
What are you doing when this happens? Is it maybe time Machine having trouble?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

I went to IO 7 and Getting Error "Playback Failed" on every podcast

I was able to listen to podcast when I first updated. It now fails with Error "Playback Failed" on every podcast. I also see that the facebook app is never updating. I powered off the Iphone 4 and powered on. I did the same on my IMAC and try resyncing. I still get the same error.

The problem is in the Yahoo mail server farm. Their mail servers are terrible. Give it time. It will eventually straighten itself out. In the mean time, create an account a gmail account, outlook.com account, etc. and consider switching.

Mdx query to get the last date of every month if the month is current month need current date..

i have a scenario where i need the data of last date of every month and if the month is current month need current date data...
is it possible using MDX...

Hi Shashi,
According to your description, you want to return the last day for each month except current month, right?
In MDX, we can use ClosingPeriod function to return the member that is the last sibling among the descendants of a specified member at a specified level, here is a sample query for you reference.
with member [measures].[a]
as
ClosingPeriod ([Date].[Calendar].[Date],[Date].[Calendar].currentmember).name
select {[measures].[a]} on 0,
[Date].[Calendar].[Month].members on 1
from
[Adventure Works]
And then use the IIF function to evaluate if the month is current month. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms145584.aspxhttp://msdn.microsoft.com/en-IN/library/ms145994.aspx
Regards,
Charlie Liao
TechNet Community Support

Getting the new products included every month

Hi friends,
Iam having two tables
PRODUCT_CATEGORY - Has the details of the Category of Products
PRODUCT_SUBCATEGORY - The Subcategory details of the Products.
I need to create a view to store the product introduced every month, how can i do this?[as i have the created date in the product category table]
PRODUCT_CATEGORY
id -- name -- cdate---------------------> fields
PRODUCT_SUBCATEGORY
id--catid--name--descriptions ----------------------> Fields
Help me in this

Requirements are not very clear..
Like this..?
sql>select * from t;
ID DT
1 30-JAN-07
1 31-DEC-06
sql>
create or replace view vu1
as
select * from t
where to_char(dt,'fmmmyyyy')=to_char(sysdate,'fmmmyyyy');
View created
sql>select * from vu1;
ID DT
1 30-JAN-07
--now db date changed to 01-feb
sql>select * from vu1;
no rows selected

HT204406 when matching my music with ITunes store I keep getting error notification

when matching my music with ITunes store I keep getting the followig message after a while: "A problem caused program to stop working correctly. Windows will close the program and notify you if a solution is available. Could someone tell me how can I fix this problem.
It keeps disconnecting me and my music stops playing. Thank you
enriqueroman

Since about Feb 1 2012 was having this same problem - seemingly started after I had downloaded latest iTunes and Lion updates. I got the error both when trying to update apps on iPhone 4S and MacBook Pro.
I found the solution on another discussion list. My iTunes account had an "&" in the name. I edited the account details through iTunes and this solved the problem immediately.

Can automation plug-in gets error notification from Photoshop ?

Hi All,
Suppose I open the photoshop file(.psd) and font is missing in the layer. Photoshop shows error dialog box. Can automation plug-in get any kind of notification regarding this font missing in layer ?
I want to do some stuff if font is missing in the layer.
Any idea/logic ?
Thanks,
Amar

Hi,
Thanks Tom for the response and idea. I can now check whether the font used in text layer is present or not by checking in font list for photoshop.
Now I am stuck in another point: load font (saved in local folder) in the photoshop in runtime. Can we update the font list of the photoshop by automation plug-in ?
I can get font list from descriptor using "kfontListStr", update the lists like "keyFontName", "fontPostScriptName", "fontFamilyName" and call
"sPSActionControl->Play(&result, eventSet, descSet, plugInDialogSilent);".
But at the moment its returning error code and I don't really know if these are enough to update font list in photoshop.
If this can't be done by automation plug-in then let me know some idea on how to solve loading font in photoshop in runtime.
Thanks,
Amar

Getting error message about Java Script/OSX/Illustrator incompatability. CS6 will not open

Suddenly, CS6 version of Adobe Illustrator is not opening,. Getting an error message that it requires a "legacy version of Java Runtime." Talked with Apple Customer Service about this and they learned that Oracle is no longer making that version available. What to do?

Read this to the end:
Adobe Illustrator(CS6) NOT running on OS X Yosemite

Getting error notifications about payment every month

Similar Messages

Maybe you are looking for