Getting error when ASN update is send from R/3 to SNC

Hello,
We are facing below error when we ASN update is send from R/3 to SNC. We are using SNC5.1. Due to this it is not updating it in SNC as ASN confirmed. We are implementing customer collaboration.
Below is error:
ASN item 4046020504 / 900002 ( 669301 R00550 / 00001 ): Notified quantity 20196.000000 is greater than due qty 19635.00000000000000 (tolerance: 0.000000) 187(/SCMB/DM_DLV)
Is this that when the actual delivery qty is more than requested qty R/3, to have correct update we need to maintain over delivery/Under del tolerance in SNC.
If yes then where I can maintain in SNC.
THX

Hi Vaibhav,
SAP SNC uses the supplier tolerances from the following source:
If the purchase order that the customer has sent from his or her back-end system to SAP SNC contains delivery tolerances for an item, SAP SNC uses these delivery tolerances. If the purchase order item does not contain delivery tolerances, SAP SNC uses the delivery tolerances from the purchase order header
If the purchase order does not contain delivery tolerances, SAP SNC uses the delivery tolerances for the purchase order item from the following source:
If the purchase order item contains a contract, SAP SNC uses the tolerances from the contract.
If the contract does not exist in SAP SNC or if the purchase order item does not contain a contract, SAP SNC uses the delivery tolerances from the purchasing info record.
If the purchasing info record does not exist in the SAP SNC system, SAP SNC uses the delivery tolerances from the location product master of the customer location.
Regards,
Sandeep

Similar Messages

Get error when checking out jsp file from cvs when Jdev is running in linux

I have JDev 9.0.3 andd CVS running in linux with same build version.
When I check out a project one jsp does not show up in the IDE but shows in the file folder correcly when I edit it thru vi.
I get this error when I try to edit in Jdev.
java.lang.NullPointerException
     at oracle.jdevimpl.webapp.html.HtmlSourceNode.reopen(HtmlSourceNode.java:159)
     at oracle.ide.model.TextNode.open(TextNode.java:150)
     at oracle.ide.model.TextNode.acquireTextBuffer(TextNode.java:375)
     at oracle.jdevimpl.webapp.html.HtmlSourceNode.getInputStream(HtmlSourceNode.java:239)
     at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.updateDocument(JspPreviewer.java:344)
     at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.open(JspPreviewer.java:161)
     at oracle.ideimpl.editor.EditorManagerImpl.openEditorInFrame(EditorManagerImpl.java:648)
     at oracle.ide.editor.EditorUtil.openExplicitEditorInFrame(EditorUtil.java:33)
     at oracle.ide.cmd.OpenEditorCommand.doit(OpenEditorCommand.java:45)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:363)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:115)
     at oracle.ideimpl.editor.EditorManagerImpl.handleEvent(EditorManagerImpl.java:1902)
     at oracle.ide.IdeAction$1.run(IdeAction.java:579)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:149)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:332)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:126)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:93)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:88)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:80)

Hi,
When you are starting service in OS, you are actually starting the maxdb instance service .
You can set it in auto mode so that you will not get this error. The OS service only establishes the connection to SAP.
As a part of CS install, from CSADMIN part it is just required to send the certificate successfully to OAC0.
Normally no activity is required to be done to under SICF from CS install point of view.
Anirudh,

Getting error when trying to create pdf from Word

How do I resolve this problem. When I try to creat a PDF from a Word file, I get an error saying that "pdfmaker is missing files"?

Start by opening word and printing the file to the Adobe PDF printer. Other than that, there is a lot of info missing in your post that is needed to answer. What version of WORD (32 or 64 bit), OS (32 or 64 bit), and version of Acrobat. It is likely that you have a combination that is not compatible for PDF maker. If so, your only choice will be the printer route.

Getting error when downloading updates for CS5 suite

I am in the process of trying to update my CS5 suite. During the download and install process, I get an error and the installation quits.

I just receive a message that there is a download error and you must quit and try to restart the download later.

Getting error when executing a RFC copied from standard RFC

Hi Guys ,
I am facing a strange issue while executing a RFC which is exact replica of standard rfc RFC_READ_TABLE.however the copied RFC is working fine as Simple Function Module but when I use RFC destination it gives me System_Exception.
Can please anyone advise
Thanks
Yogesh Gupta

HI,
Check with the RFC Destination name that you are using when calling this function module, it may not be existing... .
how ur calling it.
call function 'RFC_READ_TABLE ' Destination <RFCName>
Thanks
Mahesh

Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh Sutar

Hi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I think I solved the problem by initiating the update in a different way, from the itunes panel where I can click to start the update, instead of saying yes when asked if I want to update when itunes launches in response to the iphone being plugged into the computer.

I need to download Runtime Engine 7.1, but I get a 404 error when I try to download from the website.

I need to download Runtime Engine 7.1, but I get a 404 error when I try to download from the website.

Are you getting it from this link (assuming Windows): http://joule.ni.com/nidu/cds/view/p/id/703/lang/en? The download link on that page seems to work just fine.

I am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

sorry i was typing fast and didnt check spelling and stuff

[svn] 1774: Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials .

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
I open the remote power shell to the exchange server 2013.
Issue the following commands and getting the following error.
$mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
At line:1 char:27
+ $mailbox.EmailAddresses -= <<<< "eum:50004;phone-context=telExt5digits.lync5.com"
+ CategoryInfo : InvalidOperation: (op_Subtraction:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFoundHelp!

Now for an answer - your remote session doesn't have the same object you have on the server itself. Notice it says this is an array list, not a ProxyAddressCollection. If you need to work around this, you'll need to massage the addresses another
way that the system will accept. I'd try the following:
$NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
See what you get in the $NewAddresses variable when you do this.

Why does my email address get messed up when people hit reply sending from Mac Mail 4.6

Why does my email address get messed up when people hit reply sending from Mac Mail 4.6
OSX 10.6.8

I talked to our email provider and they say it has to do with the way thre recipients email address book has recorded the address. They say that they need to fix the address on their end.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

Getting error when record type is used

Hi Experts,
Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
PLS-00302: component 'ENAME' must be declared
PLS-00302: component 'SAL' must be declared
CREATE OR REPLACE PACKAGE emp_details_proc
IS
TYPE emp_record IS RECORD
(empno emp.empno%TYPE,
ename emp.ename%TYPE,
sal emp.sal%TYPE);
TYPE emp_type is TABLE OF emp_record INDEX BY binary_integer;
PROCEDURE EMP_PROC;
PROCEDURE sal_update_PROC
(    p_rule in emp_type
     , p_deptno in number
     , p_job in number
END;
CREATE OR REPLACE PACKAGE BODY emp_details_proc
IS
PROCEDURE EMP_PROC
IS
    V_DEPTNO NUMBER := 10;
    V_JOB VARCHAR2(20):='CLERK';
BEGIN
for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
         loop
              sal_update_PROC
              ( p_rule => rc
                , p_deptno => V_DEPTNO
                , p_job =>V_JOB
end loop;
EXCEPTION
     WHEN OTHERS THEN
DBMS_output.put_line(SQLERRM);
END;
PROCEDURE sal_update_PROC
(    p_rule in emp_type
     , p_deptno in number
     , p_job in number
IS
    V_ename VARCHAR2(20);
    V_SAL NUMBER;
BEGIN
      V_ename := p_rule.ename;
      V_sal := p_rule.sal;
        IF V_sal <=3000 THEN
        UPDATE EMP SET sal=sal+v_sal*10 WHERE ename=v_ename;
        commit;
      END IF;
dbms_output.put_line(v_ename||'   '||v_sal);
      END;
      END;
Instead of this
SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno;
PROCEDURE sal_update_PROC
(    p_rule in emp_type
     , p_deptno in number
     , p_job in number
If I use
SELECT * FROM emp where deptno =v_deptno
PROCEDURE sal_update_PROC
(    p_rule in emp%ROWTYPE
     , p_deptno in number
     , p_job in number
I am not getting any error.
Please help me.Why I am getting error what is wrong in my code.
Thanks in advance.

for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
         loop
              sal_update_PROC
              ( p_rule => rc
                , p_deptno => V_DEPTNO
                , p_job =>V_JOB
p_rule => rc       --> What exactly in rc? It's just a counter. You are using this (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)query but not using a single value returned from this query in the code.
Ishan

Getting error when ASN update is send from R/3 to SNC

Similar Messages

Maybe you are looking for