Getting Error while Installing Workflow Manager 1.0 on Sharepoint 2013 On-Prem server

I am trying to install Workflow Manager 1.0 on our SharePoint Server 2013 which is On-Prem installation. The SharePoint Server 2013 is functioning correctly. During the installation of Workflow Manager 1.0 on the same SharePoint 2013 server, I receive the
following message: "Port number 9355 specified for HTTPS Port is blocked" I have checked our firewall Inbound rules and this port is not blocked.
Any reason why this could be happening or did I miss anything?
Thanks Snehal H.Rana SharePoint Consultant

I am happy to inform you that I was able to resolve this error. I configured this on different ports other than 9355. We need to modify 2 files called "ClusterManifest.1.0.xml" and "ClusterManifest.current.xml" in c:\Program
Files\Windows Fabric\Bin. They were pointing to older FQDN under following node:
 <NodeList>
        <Node NodeName="yourserverfqdn" IPAddressOrFQDN="yourserverfqdn" IsSeedNode="true" NodeTypeRef="DefaultNodeType" />
      </NodeList>
These files won't let you edit directly in notepad so you will need to make a copy of these files (just in case). Open up the notepad as "Run As Administrator". Drag these files to the notepad. After you are done editing, save these as original
names but make sure that the extension is .xml
You will also need to do IISReset
That did the trick for me.
Thanks Snehal H.Rana SharePoint Consultant

Similar Messages

  • Getting error while publishing workflow using SP designer for SharePoint 2013

    Hi,
    I am try to setup Workflow manager for our sharepoint applications.
    WF manager set ran without any issue.
    I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
    I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
    The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
    "Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
       at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
       at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
    Any help would be highly appreciated
    Thanks,

    Hi,
    According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
    Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
    Please check whether the “Configure service application associations”,  ”App Management Service” is already associated.
    Then please check whether the “Manage Services on server” and the “App Management Service” is started.
    In addition, please try to re-register Workflow Service.
    If the issues still exists, please follow the steps in the
    Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
    Steps to Troubleshoot Workflow Management Service and
    Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
    More information:
    http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014

    we are getting error while refreshing connection on excel sheet which containing data from data source in form of power pivot.
    error is "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:"
    I am confused about Configuring the Analysis Service in SharePoint Mode.
    What account should be used for Configuring the Analysis Service in SharePoint Mode?
    what are the steps and what permissions are required and where to add it?
    can you please explain in detail so i can make sure about my account permission properly in my environment?
    Do we need to install Analysis service on sharepoint server box or not? if yes, then what are steps to follow it?
    it is mentioned here to have two services are running under manages services under sharepoint central,
    https://msdn.microsoft.com/en-us/library/jj682085.aspx#bkmk_verify_powerpivot
    but we don't have SQL Server Analysis Services
    running under  Manage
    services on server.
    what need to be done here to fix this issue ?
    Thanks,
    Deepak Patel

    Hi Deepak,
    We are currently looking into this issue and will give you an update as soon as possible.
    Thank you for your understanding and support.
    Meanwhile, could you please check if there is any related ULS log for help troubleshoot the issue when error occurs.
    http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx
    http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/04/02/powerpivot-for-sharepoint-manual-data-refresh-failing.aspx
    Thanks
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Errors when pairing Workflow Manager 1.0 with Sharepoint 2013 or trying to run C# samples to directly communicate with workflow manager

    When I try with Register-SPWorkflowService for SP2013 integration or run C# samples for workflow manager 1.0 I get
    "The  remote server returned an error: (404) Not found".
    With C# sample code runs,
    Scope '/$Activities' was not found.  HTTP headers received from the server - ActivityId: e268765f-9d95-47ed-81fd-c4b38f40bfe0. NodeId: XXXX. Scope: /$Activities/...
    The inner exception is:
    The remote server returned an error: (404) Not Found.
    We have got stuck here for a couple of days and...
    The workflow server runs on a dedicated machine than the SQL server for workflow farm DBs...
    I found one similar complain for the pre-release versions of the workflow and service bus etc.
    Help please...
    muharrem
    Muharrem

    Hi,I had already done disableloopbackcheck and it did not matter.No problem with creating scopes (using powershell) but pairing fails anyway.Here is the config from a local explorer connection to the HTTPS port:(And following it, you may see the result of
    a scope enumerator script)
    <?xml version="1.0"?>
    <ScopeInfo xmlns="http://schemas.microsoft.com/workflow/2012/xaml/activities" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
    <ChildScopeCount>3</ChildScopeCount>
    <DefaultWorkflowConfiguration/>
    <Description>For / sample only</Description>
    <LastModified>2013-11-08T21:22:00.967</LastModified>
    <LastRevised>2013-11-08T00:04:31.88</LastRevised>
    <Path>/</Path>
    <SecurityConfigurations>
    <ScopedSecurityConfiguration i:type="WindowsSecurityConfiguration">
    <Name>Microsoft.Workflow.Management.Security.WindowsSecurityConfiguration</Name>
    <WorkflowAdminGroupName>altemis\WorkflowAdmins</WorkflowAdminGroupName>
    </ScopedSecurityConfiguration>
    </SecurityConfigurations><
    Status>Active</Status>
    </ScopeInfo>
    PS C:\Shared> C:\Shared\WF Script-Enumaret Scopes.ps1
    Name:
    Path: /
    Status: Active
    User Comments: For / sample only
    Parent: None
    Children: 3
    Exception calling "GetChildScopes" with "0" argument(s): "Scope '/$ChildScopes' was not found.  HTTP headers received from 
    the server - ActivityId: 616224db-0321-450a-92ef-f03384c008a2. NodeId: ALTEMIS-SVR02. Scope: /$ChildScopes. Client 
    ActivityId : 649dba85-dc89-0002-d9bf-9d6489dcce01."
    At C:\Shared\WF Script-Enumaret Scopes.ps1:21 char:9
    +         $manager.GetChildScopes() | % { WriteScopeInfo $scopeUri $_.Path $scope. ...
    +         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ScopeNotFoundException
    Muharrem

  • Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014 using BISM file connection

    I am getting following error while refreshing connection on excel sheet in power pivot gallery,
    my scenario,
    using BISM file connection to create and  refresh power pivot excel sheet in power pivot gallery
    throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
    Microsoft.AnalysisServices.ChannelTransport is not available. 
    i found error in event viewer,
    "Activation context generation failed for "C:\Program Files\Microsoft Analysis
    Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
    Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
    not be found. Please use sxstrace.exe for detailed diagnosis.
    what should i do to fix it?
    Thanks for help.
    Deepak Patel

    Rebecca,
    yes, this is issue i am getting.
    Activation
    context generation failed for "C:\Program
    Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
    Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
    not be found. Please use sxstrace.exe for detailed diagnosis.
    let me know if you can find fix for it.
    THanks,

  • Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

    Hi,
    I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
    an error during the installation of assembly micro soft.vc80.crt

    Hi,
    I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
    an error during the installation of assembly micro soft.vc80.crt
    Can you please post summary.txt file here.Below link will help you in finding it.
    http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
    Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
    http://www.microsoft.com/en-gb/download/details.aspx?id=15336
    Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Getting error while installing reporting servcies on existing sql server 2012.

    Hi Expaerts,
     sql 2012 sp1:
    getting error while installing Reporting services on existing sql server. at final step
    Error on scren: install_rsharepoint_cpu64_action : roll back , rolling back action.
    error on popup windows:  ' one or more files required to restore your computer to its previous state colud  not be found. restoration will not be found.
    Thanks in advance.

    Hello,
    Please help to collect the useful log information while install SQL Server Reporting Services. Here is the article for your reference, please see:
    Navigating the Setup Logs when you install SQL Server 2012 Reporting Services:
    http://blogs.msdn.com/b/jtarquino/archive/2012/03/14/navigating-the-setup-logs-when-you-install-sql-server-2012-reporting-services.aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • Getting Error while installing UCM

    Hi All,
    Am getting error while installing the UCM in my system.
    Error description:-
    NOTICE:     Install logging initialized at 2/5/10 3:34 PM.
    NOTICE:     Installing master server.
    NOTICE:     Installing with Java version 1.5.0_11.
    NOTICE:     Install logging initialized at 2/5/10 3:35 PM.
    NOTICE:     Finished install type QueryConfiguration at 2/5/10 3:35 PM.
    NOTICE:     Install logging initialized for D:/UCM/install/2010-02-05-new.txt at 2/5/10 1:08 PM.
    NOTICE:     Unable to connect to database. Installation will fail.
    ERROR:     Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:ORACLE'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    The Connection descriptor used by the client was:
    localhost:1521:ORACLE
    NOTICE:     Install logging initialized for D:/UCM/install/2010-02-05-new.txt at 2/5/10 1:09 PM.
    NOTICE:     Successfully installed 'ActiveDirectoryLdapComponent' component
    NOTICE:     Successfully installed 'ArchiverReplicationExceptions' component
    NOTICE:     Successfully installed 'CheckoutAndOpenInNative' component
    NOTICE:     Successfully installed 'CheckSCSHealth' component
    NOTICE:     Successfully installed 'CIS_Helper' component
    NOTICE:     Successfully installed 'ContentFolios' component
    NOTICE:     Successfully installed 'ConfigMigrationUtility' component
    NOTICE:     Successfully installed 'FileStoreProvider' component
    NOTICE:     Successfully installed 'Folders_g' component
    NOTICE:     Successfully installed 'Helper' component
    NOTICE:     Successfully installed 'FormEditor' component
    NOTICE:     Successfully installed 'InboundRefinerySupport' component
    NOTICE:     Successfully installed 'LinkManager8' component
    NOTICE:     Successfully installed 'OracleTextSearch' component
    NOTICE:     Successfully installed 'OracleQueryOptimizer' component
    NOTICE:     Successfully installed 'ProxyConnections8' component
    NOTICE:     Successfully installed 'ThreadedDiscussions' component
    NOTICE:     Successfully installed 'CoreWebdav' component
    NOTICE:     Successfully installed 'WebUrlMapPlugin' component
    NOTICE:     Successfully installed 'WsdlGenerator' component
    NOTICE:     Successfully installed 'DBSearchContainsOpSupport' component
    NOTICE:     Successfully installed 'UserProfileSchemaLoader' component
    NOTICE:     Successfully installed 'FCKEditor' component
    NOTICE:     Successfully installed 'NativeOsUtils' component
    NOTICE:     Successfully installed 'ContentAccess-win32' component
    NOTICE:     Successfully installed 'ComponentTool' component
    NOTICE:     Successfully installed 'CoreUserInterfaceLibrary' component
    NOTICE:     Successfully installed 'Localization' component
    NOTICE:     Successfully installed 'SecurityProviders' component
    NOTICE:     Successfully installed 'PopUpCalendar' component
    NOTICE:     Successfully installed 'YahooUserInterfaceLibrary' component
    NOTICE:     Successfully installed 'iTextComponent' component
    NOTICE:     Installing shortcuts
    WARNING:     Unexpected exception: Unable to initialize the system provider 'SystemDatabase'. Unable to create database connection for the database 'SystemDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:ORACLE'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    The Connection descriptor used by the client was:
    localhost:1521:ORACLE
    WARNING:     Unable to publish user database.
    WARNING:     Unable to register with Administration Server.
    NOTICE:     Finished install type Install with warnings at 2/5/10 1:12 PM.
    Help me on this issue

    Hi Srinath,
    again i am getting same exception ....if you feel free , check once
    NOTICE:     Install logging initialized at 2/5/10 5:06 PM.
    NOTICE:     Installing master server.
    NOTICE:     Installing with Java version 1.5.0_11.
    NOTICE:     Install logging initialized at 2/5/10 5:06 PM.
    NOTICE:     Finished install type QueryConfiguration at 2/5/10 5:06 PM.
    NOTICE:     Install logging initialized for D:/UCM/install/2010-02-05-new.txt at 2/5/10 2:38 PM.
    NOTICE:     Unable to connect to database. Installation will fail.
    ERROR:     Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:orcl'. Please make sure that the connection string, user and password are correct. ORA-01017: invalid username/password; logon denied
    NOTICE:     Install logging initialized for D:/UCM/install/2010-02-05-new.txt at 2/5/10 2:38 PM.
    ERROR:     Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:orcl'. Please make sure that the connection string, user and password are correct. ORA-01017: invalid username/password; logon denied
    ERROR:     Unable to create database tables. You will have to create them manually.
    NOTICE:     Successfully installed 'ActiveDirectoryLdapComponent' component
    NOTICE:     Successfully installed 'ArchiverReplicationExceptions' component
    NOTICE:     Successfully installed 'CheckoutAndOpenInNative' component
    NOTICE:     Successfully installed 'CheckSCSHealth' component
    NOTICE:     Successfully installed 'CIS_Helper' component
    NOTICE:     Successfully installed 'ContentFolios' component
    NOTICE:     Successfully installed 'ConfigMigrationUtility' component
    NOTICE:     Successfully installed 'FileStoreProvider' component
    NOTICE:     Successfully installed 'Folders_g' component
    NOTICE:     Successfully installed 'Helper' component
    NOTICE:     Successfully installed 'FormEditor' component
    NOTICE:     Successfully installed 'InboundRefinerySupport' component
    NOTICE:     Successfully installed 'LinkManager8' component
    NOTICE:     Successfully installed 'OracleTextSearch' component
    NOTICE:     Successfully installed 'OracleQueryOptimizer' component
    NOTICE:     Successfully installed 'ProxyConnections8' component
    NOTICE:     Successfully installed 'ThreadedDiscussions' component
    NOTICE:     Successfully installed 'CoreWebdav' component
    NOTICE:     Successfully installed 'WebUrlMapPlugin' component
    NOTICE:     Successfully installed 'WsdlGenerator' component
    NOTICE:     Successfully installed 'DBSearchContainsOpSupport' component
    NOTICE:     Successfully installed 'UserProfileSchemaLoader' component
    NOTICE:     Successfully installed 'FCKEditor' component
    NOTICE:     Successfully installed 'NativeOsUtils' component
    NOTICE:     Successfully installed 'ContentAccess-win32' component
    NOTICE:     Successfully installed 'ComponentTool' component
    NOTICE:     Successfully installed 'CoreUserInterfaceLibrary' component
    NOTICE:     Successfully installed 'Localization' component
    NOTICE:     Successfully installed 'SecurityProviders' component
    NOTICE:     Successfully installed 'PopUpCalendar' component
    NOTICE:     Successfully installed 'YahooUserInterfaceLibrary' component
    NOTICE:     Successfully installed 'iTextComponent' component
    NOTICE:     Installing shortcuts
    WARNING:     Unexpected exception: Unable to initialize the system provider 'SystemDatabase'. Unable to create database connection for the database 'SystemDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:orcl'. Please make sure that the connection string, user and password are correct. ORA-01017: invalid username/password; logon denied
    WARNING:     Unable to publish user database.
    WARNING:     Unable to register with Administration Server.
    NOTICE:     Finished install type Install with warnings and with errors at 2/5/10 2:42 PM.
    Regards,
    Vijay

  • Trying to re install PSE 11 and keep getting error while installing Shared Technologies

    Trying to re install PSE 11 and keep getting error while installing Shared Technologies

    Try this link first:
    <Install rollback and Shared Technologies | Windows>
    It is for the Windows system but if you are using Apple MAC then you'll have to wait until Barbara is here later today.

  • Workflow Manager 1.0 with SharePoint 2013

    Hi Guys,
    I understand as per below link that minimum three servers are required to provide high availability for Workflow Manager 1.0 in SharePoint 2013.
    http://blogs.msdn.com/b/sanjaynarang/archive/2013/04/06/sizing-and-capacity-planning-for-sharepoint-2013-resources.aspx
    Could anyone please point me Microsoft resources or let me know what needs to be installed on the three servers and Hardware pre-requisites? 
    Thanks in advance.
    Cheers, Badal

    Hi Badal,
    According to your description, my understanding is that you want to configure the high availability for Workflow Manager 1.0 with SharePoint 2013.
    Per my knowledge, the three servers just have the same Hardware pre-requisites:
    http://technet.microsoft.com/en-us/library/jj193466.aspx
    You can use Network Load Balancing (NLB), Application Request Routing (ARR) or slightly less trivial with another load balancing solution to implement the high availability for Workflow Manager.
    http://www.harbar.net/articles/wfm1.aspx
    http://technet.microsoft.com/en-us/library/72646b45-646f-4dfb-ab52-e42f187655e7
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Getting error while installing MSSQL 2005 SP2 Windows Server 2008 Service Pack 1

    Hi,
    We are getting error while we are installing MSSQL 2005 SP2. 
    It gives me the following error
    No Qualifying Product
    ===================
    This machine does not have a product that matches this installation package.
    I am pretty new to MSQL. Any help to solve this is much more appreciated.

    Hello,
    It seems you downloaded Service Pack 2 for SQL Server 2005 alone, that download does not install a SQL Server 2005 instance.
    You might have to download and install SQL Server 2005 and then proceed to apply service packs related to that version of SQL Server.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • I am getting Error while installing any applicatio...

    I am getting "Download error" while installing any applications whethet it is from 
    Nokia Suit or Nokia Store or N 8 fanclub Sighned .
    After installation its coming to preparing than an error 
    Solved!
    Go to Solution.

    Ok..I got it ..some apps need to be online even when installing through Nokia Suit.My Mobile Data was off..

  • Getting error while installing BI publisher desktop 64 bit

    Hi ,
    I'm getting the following error while installing BI publisher desktop 64 bit.
    "Please use BI Publisher Desktop installer 32 bit"
    My Machine OS is : Windows 7 , 64 bit.
    If I go with BI publisher desktop 32 bit, I'm not getting the "BI Publisher" tab in Microsoft Word. (MS word version : 2010) .
    Kindly help to solve the installation issue.
    Regards,
    Vanitha

    Hello Vanitha,
    After you install BI Publisher Desktop 32bit, you are not seeing the BIP ribbon on MS Word but can you see the BI Publisher Add-In
    in Word Options > Add-Ins > Inactive Applications Add-Ins?
    Bogdan

  • Error While Installing Oracle 9.2.0.1.0 on Win 2003 Server

    Hi,
    I am getting following error while installing Oracle 9.2.0.1.0 on Windos Server 2003-
    ORA-12546: TNS: Permission Denied.
    Above error pops-up during database configuration phase. Oracle docs says- "Acquire necessary privileges and try again." But I am installing as administrator.
    Thanks in advance,
    -Sandeep

    I can't tell you why this error is occurring but you are installing a desupported version of the Oracle database that may well not be supported on your version of the o/s.
    Check the support matrix and metalink and see if you can install a supported product such as 10.2.

  • Getting error while setting SFTP adapter properties dynamically in Biztalk 2013

    Hi ,
    I am getting error while doing setup SFTP adapter in biztalk 2013.
     Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Create SFTP facade error.
    Server stack trace: 
       at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker..ctor(String host, Int32 port, String username, String password, String key, String privateKeyPassword, Boolean acceptAnyserverKey, String expectedServerFingerPrint, String proxyhost, Int32 proxyport,
    String proxyuserName, String proxypassword, Int32 proxytype, Int32 encryptionType, Boolean isKeyData)
       at Microsoft.BizTalk.Adapter.Sftp.SftpConnection.OpenUnderlyingConnection(SftpConnectionProperties connectionProperties)
       at Microsoft.BizTalk.Adapters.CommonHelpers.Connection`3.ConnectionPool`3.GetConnection(T1 connectionProperties, TimeSpan timeout)
       at Microsoft.BizTalk.Adapters.CommonHelpers.Connection`3.GetConnection(T connectionProperties, TimeSpan timeout)
       at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
       at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    Exception rethrown at [0]: 
       at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
    Exception rethrown at [1]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result) 
     MessageId:  {1059433E-B2D4-4394-8277-C31BDFC00553}
     InstanceID: {BED31F04-E764-446D-A587-65B1F72F7A98}

    Hi Abhay,
    Can you pls explain what are you trying to achieve here? Little bit about your solution/requirement and the way you implementing things?
    As you have mentioned that you are setting the SFTP adapter properties dynamically within your orchestration, can you share the code where you are assigning the properties and constructing the message?
    Rachit

Maybe you are looking for