Getting error while running crystal reports on SAP BW Query
Hi
I have installed Crystal Reports 2008 SP3 and then SAP Integration Kit. I'm able to connect to SAP BW but after adding the query to crystal and while refreshing the report i'm getting an error
Database Connection Error: 'BAPI Error #:0' Error occured when starting the parser: timeout during allocate/CPIC-CALL:'ThSAPCMRCV'.
Please help how to overcome this error.
Thanks
Raghavendra.G
Check the following SAP note
https://service.sap.com/sap/support/notes/1032461
Regards,
Stratos
Similar Messages
-
Error While running crystal report
Dear All,
i have some crystal reports in SAP.while opening any crystal report its through some error like "Error While running crystal report ".
Kindly suggested me how to do this .
Thanks&Regards,
P.PratapHi All,
Thanks for your reply,
already i close this Issue.
they have one addon for crysatl report .so it show error like Error while Running crystal report
thanks&Reagrds,
P.Pratap -
Getting error while running SSRS report in SharePoint 2010
Hi,
I am getting below error while running a SSRS reports in SharePoint. Your help will be appreciated
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
Timestamp: Wed, 5 Nov 2014 11:58:42 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503
Line: 5
Char: 62123
Code: 0
Thanks,
ManjunathHi,
According to your post, my understanding is that you get error while running SSRS reports.
Basically, If the Request Management service is enabled, it manages all incoming requests by evaluating logic rules against the user requests in order to determine what\which action to take and which machine or machines (targets) in the farm should handle
the request.
By default the Request time out value for Request Management service are as follows,
RequestTimeout : 00:01:40
RequestExecutionTimeout : 01:00:00
So the error throws from RM service for those reports who take more than 1 minute to generate the report.
To solve this issue, we can stop the Request Management service.
Or increase the time out
value by making use of following PowerShell script.
$waUrl = "URLofWEbApp"
$wa = Get-SPWebApplication $waUrl
$rmSettings = $wa | Get-SPRequestManagementSettings
$req=$wa.RequestManagementSettings
$timeout2= New-TimeSpan -minutes 5
Sreq.Requesttimeout=$timeout2
$req.update()
For more information:
http://blogs.technet.com/b/sajiths/archive/2014/08/19/ssrs-reports-timed-out-with-39-503-39-error-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Getting Error while integrating Crystal reports with Java
Hi All,
I am getting below error while integrating crystal report with java
[java] os.arch = x86
[java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
(Ljava/awt/Image;I)V
[java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
[java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
Source)
[java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
Source)
[java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
[java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
[java] at JRCViewReport$1.run(JRCViewReport.java:50)
[java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
178)
[java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
[java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
spatchThread.java:190)
[java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
atchThread.java:144)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:138)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:130)
[java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
Any help can be appreciated
KalyanHi All,
For got to mention i am using crystal reports XI release 2 with JDK1.4.
Kalyan -
I am getting dump error while running one report in one select query
Hi,
While running a report program, I am getting a dump error in one select query. So could you please correct the select query so that I can't face the dump error.
SELECT vbeln parvw kunnr INTO CORRESPONDING FIELDS OF TABLE l_t_vbpa
FROM vbpa
FOR ALL ENTRIES IN l_t_backorder_item
WHERE vbeln = l_t_backorder_item-vbeln AND
( ( parvw = c_we AND kunnr IN rng_shipto ) OR ( parvw = c_ag AND
kunnr IN rng_soldto ) ) .
<removed by moderator>
Best Regards,
BDP
Edited by: Thomas Zloch on Apr 30, 2010 12:31 PMHi Bansidhar,
It would be helpful if you could tell what type of dump it is.
If it is a timeout you should check whether l_t_backorder_item is empty - in this case ALL document numbers are selected. f you get the timeout with a populated table consider converting the l_t_backorder_item table into one ore more ranges tables - the select with ranges tables is way quicker than 'for all entries'. But take care the ranges table has not to many entries - the SAP SQL converter puts this into one huge SQL statement and this might become too big to be handled by the database (depends on the actual underlying database).
I would also consider splitting the SELECT into two (2nd one with 'appending into table') to make the code easier to understand It also helps the database system determining a strategy for the select.
Regards,
Gerd Rother -
Error while running Crystal Reports from application
Hi,
I am getting the below error when I try to run Crystal Reports from my application.
There are no Page Servers connected to the Cache Server or all connected Page Servers are disabled or all connected Page Servers are not part of the specified server group. Please try to reconnect later.
I am able to preview the reports in CMC and Infoview, but when I try to run the same report via my application the above error pops up.
Sometimes I get a different error:
The Page Server you are trying to connect to is not accessible. Please contact your system administrator.
Looks like some configuration settings are missing/ corrupted.
I tried to look in a number of websites... tried few workarounds, but none seems to be working.
Any help is highly appreciated.
Meena
Edited by: meenakshitikoo1 on Apr 19, 2011 12:46 PMCheck the following SAP note
https://service.sap.com/sap/support/notes/1032461
Regards,
Stratos -
Error while previewing Crystal Reports in SAP B1
Dear Experts,
I have installed the Crystal Reports Addon to SAP B1 2007B, and it works fine with the sample reports in B1.
My problem is as given below.
I have created Covering Letter report for the Cheque printing functionality. Preview and all is ok in the Crystal Report designer.
But it shows error while trying to preview it in SAP B1.
The Error Message is: Failed to retrieve data from the database. Details: [Database vendor code: 207]
I have used the Command Query while creating the report, and is given below:
SELECT ODSC_BankMaster.BankName, OCHO_ChequePaymentHd.CheckNum, OCHO_ChequePaymentHd.CheckDate,
CHO1_ChequePaymentDt.LineDitail, CHO1_ChequePaymentDt.LineMoney, OCHO_ChequePaymentHd.AcctNum, OCHO_ChequePaymentHd.TransRef,
OCHO_ChequePaymentHd.CheckSum, OCRD_BusinessPartner.CardName, CRD1_BusinessPartnerAddress.Address,
CRD1_BusinessPartnerAddress.Street, CRD1_BusinessPartnerAddress.City, CRD1_BusinessPartnerAddress.Block,
CRD1_BusinessPartnerAddress.ZipCode, OVPM_OutgoingPayment.U_AMTWRDS, OVPM_OutgoingPayment.Comments, OADM_CompanyDetails.CompnyName,
OADM_CompanyDetails.CompnyAddr, OADM_CompanyDetails.Phone1, OADM_CompanyDetails.Phone2, OADM_CompanyDetails.Fax,
OCHO_ChequePaymentHd.Address AS ToAddress
FROM CHO1 AS CHO1_ChequePaymentDt INNER JOIN
OVPM AS OVPM_OutgoingPayment INNER JOIN
OCHO AS OCHO_ChequePaymentHd ON OVPM_OutgoingPayment.DocEntry = OCHO_ChequePaymentHd.PmntNum ON
CHO1_ChequePaymentDt.CheckKey = OCHO_ChequePaymentHd.CheckKey INNER JOIN
ODSC AS ODSC_BankMaster ON OCHO_ChequePaymentHd.BankNum = ODSC_BankMaster.BankCode INNER JOIN
OCRD AS OCRD_BusinessPartner ON OCHO_ChequePaymentHd.VendorCode = OCRD_BusinessPartner.CardCode INNER JOIN
CRD1 AS CRD1_BusinessPartnerAddress ON OCRD_BusinessPartner.CardCode = CRD1_BusinessPartnerAddress.CardCode AND
OCRD_BusinessPartner.BillToDef = CRD1_BusinessPartnerAddress.Address CROSS JOIN
OADM AS OADM_CompanyDetails
WHERE (OCHO_ChequePaymentHd.Printed = 'Y') AND (OCHO_ChequePaymentHd.Canceled = 'N') AND (OCHO_ChequePaymentHd.BankNum ='{?BankCode}') AND (OCHO_ChequePaymentHd.CheckNum BETWEEN {?ChequeNoFrom} and {?ChequeNoTo})
ORDER BY OCHO_ChequePaymentHd.CheckNum
If I use the tables directly in the reports, the above query would contain the database base name also as prefix to the table in the FROM clause.
Eg
DBName.dbo.OCHO
How to avoid it? Is there any settings in the designer?
Query in the Sample report doesnot have the database name as prefix.
What shall I do for that?
Hope that my problem is clear.
Please Help. Thanks in advance
Regards,
Toms AbrahamDear Toms,
DBName.dbo.OCHO is the right format for CR. You could not avoid it. Why should you?
On the other hand, it is not a good idea to rename DB name to such a long name. What is the purpose?
Thanks,
Gordon -
OBIEE : Getting Error while running a report from the Answers tab
Hi,
I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
Created and loaded the Default rpd file. I have used "Oracle in XE" as driver in the DSN and in the Connection Pool the Call Interface is ODBC 3.5.
In the Presentation Services I have logged on as Administrator, selected a Subject Area, then selected a single column from the list of columns and ran Display results. I am getting the following error :
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: IM003 code: 160 message: Specified driver could not be loaded due to system error 1114 (Oracle in XE).. (HY000)
SQL Issued: SELECT TEST_PERIOD.PER_KEY saw_0 FROM TESTUSER ORDER BY saw_0
Can anyone help me with this problem.
Thanks
SanjayI restrated the VM and that has fixed the problem.
Thanks -
Error when running crystal report
i saw the error in log file 'Only TrueType fonts are supported. This is not a TrueType font' and 'Error while running Crystal report'
Help me to fix this problem.Thanks inadvanced.
I used some software developed in vb6.It changed some system font when running :D.
i want to run both that soft and sap.Hi,
Please refer to the link, [Re: CR XI R2, Crystal Report Viewer Opentype Font not supported|Re: CR XI R2, Crystal Report Viewer Opentype Font not supported].
What is the version of your crystal report, we will try to apply some service packs.
Regards,
Clint -
Hi all,
I am getting this particular error while running a report. The error is:
<b>SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 </b>
Could anyone tell me what that means?
Thanks In advance,
RajHi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh -
Error While Running the report in oracle apps
Hi All,
I got an error while running the report.The error is
"FDPSTP failed due to ORA-06510: PL/SQL: unhandled user-defined exception".
Please anyone give ur idea to resolve this issue as it is urgent.
Thnaks
SuryaHi;
I got an error while running the report.The error is
"FDPSTP failed due to ORA-06510: PL/SQL: unhandled user-defined exception".
Please anyone give ur idea to resolve this issue as it is urgent.What is EBS version? You get this error on which steps or report? If you make search at metalik as FDPSTP failed due to ORA-06510: PL/SQL: there are 35 similar docs avaliable
Regard
Helios -
WIS 10901 error while running WEBI Report but no error in the DESKI report
Hi,
Can anyone please help me to resolve this issue.
we have recently migrated BOXIR2 - BOXI3.1. many of the reports are from SQL Server and Oracle databases.
Oracle Database connection universe reports error:
i'm getting WIS 10901 error while running WEBI report for some particular objects not for all the objects but the same time i could able to pull the same object in the DESKI.
those particular objects having lenthy data's for ex:100 bytes. but i tried same 100bytes some other objects refreshing fine and displaying results.
i don't know where we ar missing.
SQL Server Connection universe reports:
These reports are giving mismatched results from the original but the callculation are done by the reporter side by creating variables. other than that there are no issues with these reports.
Please we are struggling lot on these issues, can anyone please help us.Hi,
For your issue 2 check whether any filters used in XI R2 are missing in XI R3. As during migration some filetrs might be missed. To check this in slice and dice panel in both bo versions.
Cheers,
Suresh Aluri. -
Getting warninig while running the report
hi all am getting warning while running the report .
am getting following errors in log file .
log file is given below
please help me
+---------------------------------------------------------------------------+
Process Manufacturing Inventory: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXVIS_OPM_STOCK_STATEMENT module: Visaka RG1 Register
+---------------------------------------------------------------------------+
Current system time is 11-OCT-2011 20:35:56
+---------------------------------------------------------------------------+
**Starts**11-OCT-2011 20:35:57
**Ends**11-OCT-2011 20:37:26
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Unable to find an Output Post Processor service to post-process request 15845786.
Check that the Output Post Processor service is running.
+--------------------------------------+
+------------- 2) PRINT -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 11-OCT-2011 20:37:26
+---------------------------------------------------------------------------+
[\code]
thanks for all in advance.Ask this in the Oracle eBusiness Suite forum. This doesn't look like a Reports problem.
-
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill -
Error While Running the Report(WIS 10901)
Hi Champs,
I am facing an Error while running my Report which is "The Database Error Occurred .The Database Error Text Is :The Supplied XML is not Valid [Measures].[41RK910OO62ME7S8AOB9IEJ7F].WIS 10901.
This reports was running fine earlier but Not we are facing this issue and wen I remove that measure whose key is mentioned in the Error above then the Error is thrown for other Measures which are available in the Query.
What could be the Possible solution for this ?Hi,
Are you sure nothing has changed in the universe?
Thanks
Maybe you are looking for
-
Unable to reference items in a hashtable
HI, I'm having a bad PowerShell day today! My sample script to read in a text file and put the data into a hash table works just fine: $InputFile=Get-Content C:\Out\ktf06011.REQ $CurrentUserHashTable = @{} ForEach ($Line in $InputFile) $Data=$Line.Sp
-
Quicktime movie in separate window - how?
Hello: 2 part question... I am wanting to have a quicktime movie open in a separate window - that opens in addition to the homepage AND I want that window to display the movie only at 320 x 240. Is this possible and how do you do it? thanks!
-
Importing DVD into FCE with decent quality
Can anyone tell me what they would do if they needed to import a DVD into FCE maintain decent quality? Not a produced movie, just like a home movie...and I can't afford DVD Pro... Thanks very much! Curt
-
I have a very strange problem with workshop. I'm working on an application that contains several control projects, several java projects and a web project. Last week everything was working perfectly and suddenly on Thursday whenever I tried to build
-
Just in case some users don't follow the Youview community forums, there should hopefully be a new update soon for the Youview boxes. One update is looking to be 5.1 audio via HDMI