Getting error while transporting standard text

Hi,
I am trying to transport the standard text(created in SO10), by using RSTXTRAN program but i am getting this error message " Changes to objects are not allowed in correction/Repair" after click on "Trsfr texts to corr" button.
I am doing in the following way.
Program : RSTXTRAN
Given
Text key - Object - TEXT
TEXT KEY Name - ZTEXT
ID - ST
Language EN
Execute
enter -> click on button called transf text to corr -> it is throwing message " Transfer text to a correction" i am saying "yes" then its throwing the following error " Changes to objects are not allowed in correction/Repair"
Regards,
Sarath.J

Hi,
In order to assign a standard text to your request. You should be the owner of the request. Though you have a task on your name under that request, it doesnt allow you to assign. You will be getting the error which you got now.
Regards

Similar Messages

Error while transporting standard text using RSTXTRAN

Hai Gurus
I am trying to transport the standard text that was created in Development to Quality with the script I am working. I tried to attach the SO to the task Request using RSTXTRAN and SO are selected.Finally when I am trying attach to the correction it throws up error like this "You cannot transport client-specific objects"...what should we do for this...
Thanks
Ganesh

Hi Gurus
The Message is "You cannot transport client-specific objects".
Diagnosis
The object 'R3TR' 'TEXT' 'TEXT,Z_2200_REMIT2,ST,E' is client-specific. The current client is set so that you cannot transport client-specific objects.
System Response
You cannot release the request.
Procedure
Delete the object from the request, or ask the system administrator to change the setting of this client.
Should this occur of Settings by the Basis Guy in this client
Thanks
Ganesh

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

Error while uploading standard text files for the Global rule set

Hi all,
As part of Post Installation Activities we have uploaded standard text files for business process, functions, risks and rule set obtained with the installable Software.
While uploading the text files we have uploaded the Basis Functions Authorizations first and then R/3 text files.
When we checked no actions are appearing in the rule architect under respective functions except for the BASIS Module.
Is this because we have uploaded the Basis functions before the R/3 text files?If yes, how to replace the Basis with the R/3 ones.
We tried to replace the Basis function authorizations by re-uploading the R/3 text files again but we got the below error message u201CORA-00001:unique constraint (SAPSR3DB.SYS_C004479) violatedu201D
Can somebody please help in this regard how to get the standard rule set in our system?
Thanks and Best Regards,
Srihari.K

Hi Sri,
you should upload first the static text files and the authorization objects first and then the GRC standard rule set files following the instructions of the SAP Configuration Guide available in Service Market Place under http://service.sap.com/instguides .
The GRC standard rule set contains files named Basis_functions_action.txt and R3_function_action.txt. The first one contains ONLY function definitions in terms of transcation codes for basis only, whereas the second one contains functions definition for basis AND ERP modules. The same holds for the *_function_permission.txt files. There are also function definition files for other SAP solutions such as APO, CRM, HR etc.
You can open a customer message and request a deletion script for the rule sets files you have uploaded already. After their application of this script all rule set data will be deleted from your database. If you have uploaded static text and authorization files correctly, you can then upload the GRC standard rule set files as needed again.
best regards,
Frank

Getting error while creating a text file

Hi,
I have one macro which will write all the file names from a particular folder into a text file. However when I run it, I am getting the following error message and only last file of the identified folder is getting added in my text file.
Run Time Error '55'
File Already Open
To reproduce the scenario please add one commandbutton in your excel shhet and add the following code:
Private Sub CommandButton1_Click()
Dim p As String, x As Variant
p = "C:/*.docx"
x = GetFileList(p)
Select Case IsArray(x)
Case True 'files found
MsgBox UBound(x)
For i = LBound(x) To UBound(x)
Open "C:\temp.txt" For Output As 1
Write #1, "File Name " & x(i)
Next i
Close #1
Case False
MsgBox "No matching files"
End Select
End Sub
Function GetFileList(FileSpec As String) As Variant
Dim FileArray() As Variant
Dim FileCount As Integer
Dim FileName As String
On Error GoTo NoFilesFound
FileCount = 0
FileName = Dir(FileSpec)
If FileName = "" Then GoTo NoFilesFound
' Loop until no more matching files are found
Do While FileName <> ""
FileCount = FileCount + 1
ReDim Preserve FileArray(1 To FileCount)
FileArray(FileCount) = FileName
FileName = Dir()
Loop
GetFileList = FileArray
Exit Function
' Error handler
NoFilesFound:
GetFileList = False
End Function
'End Function
For example if I have 3 docx file(1,2,3-name of the files) in my C drive, the o/p that I want in my .txt file will be as follows.
File Name 1.docx
File Name 2.docx
File Name 3.docx
Thanks!!

For i = LBound(x) To UBound(x)
Open "C:\temp.txt" For Output As 1
You call the Open method inside the FOR loop.
BTW, a collection is much more easier.
Andreas.
Private Sub CommandButton1_Click()
Dim Files As New Collection
Dim File
Dim ff As Integer
File = Dir("C:\*.docx")
Do While File <> ""
Files.Add File
File = Dir
Loop
If Files.Count = 0 Then
MsgBox "No matching files"
Exit Sub
Else
MsgBox Files.Count & " files"
End If
ff = FreeFile
Open "C:\temp.txt" For Output As #ff
For Each File In Files
Print #ff, File
Next
Close #ff
End Sub

Getting Error While Transporting object

Hi Experts,
While Releasing the Transport Request Im getting the Following error how can i resolve it,
Not all objects in the request could be locked.
Do you want to release them anyway?
Awaiting for your replies.
Thanks
Vijay.R

Hi,
The following options can be tried:
1)Try to transport the cube once again with option "before data Target" and manually collectinng all the objects.
2)Transport the Update Rules once again
3)Activate directly once again in Test system.
Hope this helps.
Venkat

Error while transporting 0MAT_PLANT

Hi Experts
I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
it is giving the follwoing error with return code 8
Characteristic 0MAT_PLANT: Master data has to be activated before conversion
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
1.Is it because we have large no of records in Prod system ..??
2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
3.Is it related to any database error in adjusting P table in Prod...?
Please let me know anybody faced this kind of problem.
Regards
Prasad

Hi Prasad,
Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
Please decide accordingly as there is a trade off here!
-VA
Edited by: Vishwa Anand on Sep 27, 2010 12:15 PM

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

Error while saving Long Texts

Hello
We are using SRM7 Extended classic scenario.
We don't use shopping carts, rather create POs directly in SRM which will be transferred to ECC as per the standard.
Error:
I am getting an error "Error while saving Long Texts" during my PO creation. I get this message in a small pop-up screen. As soon as i click ok or close the pop up screen it kicks me out of the PO creation screen back into the main SRM screen.
When:
During the PO Creation
Any specific situation:
Yes, only for Material POs
This is happening when I am creating the PO with a Material code. I can create free text PO without any issues.
This is a standard message and the message number is 022.
Thaks for the help guys.

Hi,
To confirm can you check commeting "getOADBTransaction().commit();" gives any error message?
If yes then you can try the following option:
Have you checked whether the "/" is changed to "\" in the dbc file?
In the following two entries the slash has to be made as shown below:
APPS_JDBC_URL=jdbc\:oracle\:thin\:@(DESCRIPTION\=(ADDRESS_LIST\=(LOAD_BALANCE\=YES)(FAILOVER\=YES)(ADDRESS\=(PROTOCOL\=tcp)(HOST\=10.100.503.6)(PORT\=1521)))(CONNECT_DATA\=(SERVICE_NAME\=VIS)))
JDBC\:processEscapes=true
Thanks and Regards,
Lacman

Error while transporting req

Hi,
I have this strange problem. I have added some transformation , DTP , infopackage and routines to existing data flow.
I have put them in a single request and tried to transport them to quality server.
Now I am getting error while moving it to the quality.
The error log says that one of the transformation has error in start routine. Where is that transformation doesn't exist in the system, not in active as well as inactive mode. I have checked in RSA1 as well as table 'RSTRAN'.
Same problem with some of the DTPs as well. They are in error and they doesn't exist in the system( table RSBKDTP).
Kindly help. Am I missing something.
Regards
Vivek

Hi,
I have narrowed the problem. I had 4 transformation in that req, Now I have separate req for each transformation. Out of 4 req 3 has been transported successfully. Now I am having trouble with a single transformation and cause of the error is piece of code in include which I am using in a start routines.
LOOP AT source_package INTO ls_sourcepackage.
ls_i_mat-fpc = ls_sourcepackage-/BIC/dpmat. >> If I comment this line req get transported.
APPEND ls_i_mat TO i_mat.
ENDLOOP.
/BIC/dpmat is fiield in the structure of source package.
I am confuse why its giving trouble. The above transformation is from DataSource to Cube.
Regards
Vivek

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while transporting Openhub (BI7)

Hi Gurus,
I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
"Unable to activate table /BIC/OHZxxxxxx ."
When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
Why this error is happening?
Regards,
Raghavendra.

Hi Raghavendra,
There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
Please create one more transport request and validate the tr objects...
Best Regards,
maruthi

Error while transporting Infocube

Hello all,
i am getting following error while transporting infocube to testing system.
Please see the bellow error message details.
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZMD_Y_MR2)
Structure change at field level (convert table /BIC/FZMD_Y_MR)
Table /BIC/DZMD_Y_MR2 could not be activated
Table /BIC/FZMD_Y_MR could not be activated
Return code..............: 8
Following tables must be converted
ZMD_Y_MR InfoCube could not be activated
Thanks in advance.
BR,
YVReddy

Dear Venkat,
Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
regards,
Srini

Error while transporting Queries

Hi,
I am getting this error while transporting queries!!
Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing
Thanks

Hi Murali,
YOu are trying to transport the element ZTIC_UKA' of the query,may be an variable which is not colelcted in the request.
Try to transport the query through RSA1> Transport connection->Query-->give you query name -->Drag and Drop to Right hand side and Click on collect all dependent objects and check whetehr they have collected in the same request.Make sure ur variables are collected.
Tranport it now and Check.
Rgds
SVU123
Edited by: svu123 on Mar 4, 2010 7:41 AM

Getting error while transporting standard text

Similar Messages

Maybe you are looking for