Getting I/O Device error when trying to build?

Hi...
I'm pretty much a horrible noob when it comes to stuff like this. I'm using Ant to build an EAR for deployment to an environment. I've been doing it for a while, totally fine... but when I tried to do it today - I'm getting the following error:
Problem creating war: the request could not be performed because of an I/O device error
Now, I have no idea what this means - Google isn't being a lot of help either. Is this a memory issue? Is it something corrupt in my local Javan environment?
It happens when I try to do the build via command line and through Eclipse.
The process is able to make it through the regular build portion fine - it just chokes on building the WAR.
Anyone?

Grrr... checking out Event Viewer after this most
recent restart and I'm seeing a bunch of errors:
The driver detected a controller error on
\Device\Harddisk0
Eeep.
Sounds like it might have something to do with it,
right? Yes.
There are a ton of those and then a ton more
of these:
Logical drive 1, configured on Array Controller
[Embedded] returned a fatal error on a read/write
request on the volume.
Logical block address... &c...
Does this mean a drive has failed on the box? Or just
some controller associated with a drive?Don't know and couldn't say. Either way it's bad. Find an administrator and ask them. Hopefully you have one.

Similar Messages

  • I get an internal device error when trying to sync my iphone 4

    Every time I connect I either get a message from iTunes that it doesn't recognize the phone or it tries to sync it and can't ending with an internal device error message.

    I had the same problem. I got it working a few hours after setting up the account. Go to the firefox button and click sync now. This solved the "Failed Server Lookup" issue for me.

  • I'm getting an Internal Muxer Error when trying to build a DVD project with still menu images

    It originally happened with moving menu content and a help search said it was due to the loop point on a menu being after the end point of the asset but this was not the case.
    I've now changed all the menu content to static images and the error is still occurring.

    If you want a still image for your DVD menu, click on the Menu in the Outline, then look at the Inspector. Is the Duration set to 0? If not then change it to zero. Also look below that to "At End" and make sure that is set to Still.
    Also make sure the image that you imported was a RGB image in either JPEG, TIFF, PNG, or PICT format (PNG would be your best choice), and that the image is SD resolution (i.e., 720x480 for NTSC).

  • I get an web service error when trying enable web services. I have latest update and rebooted

    i get an web service error when trying enable web services. I have latest update and rebooted

    hi there philnj,
    could you help the community narrow troubleshooting by providing a little more information? Particularly what model printer are we dealing with?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Why am I getting an app store error when trying to download Lion?

    Why am I getting an app store error when trying to download Lion? Any ideas?

    I would complain really bad and get them to give you a Flash card that they just came out with because they've inconvenienced you so much and  you don't have hours to spend at the apple store waiting for the whole thing to load.
    The only thing about the flash cards is that it will change your whole motherboard so it won't allow you to install snow leopard or anything less, ever again. (as what the apple specialist told me over the phone).
    I would also suggest waiting. It really isn't worth the hastle and you may not benefit from installing it on your old computer... just a thought.

  • HT1926 I keep getting an msvcr80.dll error when trying to download newest version of iTunes.

    I keep getting an msvcr80.dll error when trying to download newest version of iTunes.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99595)

  • HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
    Is this the only site you have problems with ? and does Safari work ok ?
    Often this problem requires the page to be reloaded
    * try pressing the shift key as you reload the page
    Another problem is sometimes the cookies for that site need clearing
    * see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
    * see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

  • I get aq run time error when trying to load the latest version of iTunes. Help.

    I get a run time error when attempting to install the latest version of iTunes & now cannot access iTunes. Can anyone help me?

    Hi jalbany,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • [Solved] aclocal error when trying to build caja-dropbox

    When trying to build caja-dropbox from https://aur.archlinux.org/packages/caja-dropbox/ I get the following error:
    CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/playenball/Downloads/caja-dropbox/src/caja-dropbox-1.8.0/missing aclocal-1.14 -I m4
    /home/playenball/Downloads/caja-dropbox/src/caja-dropbox-1.8.0/missing: line 81: aclocal-1.14: command not found
    WARNING: 'aclocal-1.14' is missing on your system.
             You should only need it if you modified 'acinclude.m4' or
             'configure.ac' or m4 files included by 'configure.ac'.
             The 'aclocal' program is part of the GNU Automake package:
             <http://www.gnu.org/software/automake>
             It also requires GNU Autoconf, GNU m4 and Perl in order to run:
             <http://www.gnu.org/software/autoconf>
             <http://www.gnu.org/software/m4/>
             <http://www.perl.org/>
    Makefile:398: recipe for target 'aclocal.m4' failed
    make: *** [aclocal.m4] Error 127
    ==> ERROR: A failure occurred in build().
        Aborting...
    I am not sure how to go about fixing this error. I was hoping that some here might be able to help or point me in the right direction.
    Thanks.
    Edit: I have tried building in a clean chroot and I get the same error.
    Last edited by playenball (2015-02-06 06:43:07)

    clfarron4 wrote:A possible related bug is this, referenced in this thread.
    clfarron4: It looks like it could be however the suggested solution in the bug report did not solve the problem.
    As I did not want to solve it dirty as Thorsten Reinbold did to build his package I downgraded automake from 1.15 to 1.14 temporarily and built the package with no errors. I then installed the package and all is working properly. I then reupgraded to version 1.15.

  • I/O device error when trying to backup system image (any advice? please!)

    Having posted this once with absolutely no response, I'll try again.
    When trying to backup my K330B system image, I get "device error encountered with either the source or the destination (0x8078012D)" and "Additional information: The request could not be performed because of an I/O device error.  (0x8007045D)"  It recommends chkdsk/r on both the source and destination devices.  I did this for C: and for the external drive I'm backing up to.  No problems are found.
    I also found the Lenovo Hard Drive Quick Test on the support site.  It does not list K330B as one of the devices it is designed for, but I tried it anyway.  It reported an error on the read test and two other tests that it performed when directed to test all partitions on the HDD.
    Has anyone else had problems backup up the entire system image but no problems backing up just the C: partition?

    Backing up system image using what program or component?
    What brand hard drives? Most manufacturers have test utilities
    for their drives, sometimes better at finding errors.
    As HDQT you tried found some errors, you should test drives
    more thoroughly as a first step.

  • I/O device error when trying to backup system image on my K330B running Windows 7 Home Premium

    I set up my Idea Centre K330B to schedule complete system backups to an external HDD once a week.  This worked fine for three months, then about a month ago a scheduled backup failed due to "device error encountered with either the source or the destination (0x8078012D)".  It also gave "Additional information: The request could not be performed because of an I/O device error.  (0x8007045D)"
    I ran chkdsk/r on both the backup drive ( E: ) and the system drive ( C: ) and no problems were found.  The backup drive has plenty of available space.  I tried the backup to a freshly NTFS-formated external drive.  I tried the backup with my BitDefender 2012 Anti-virus disabled. I tried the backup after booting in safe mode.  Nothing works.
    If I specify to backup only C: and not the reserved partition the backup completes with no problems.
    I get the same error condition whether I perform the backup with Windows or the Lenovo backup software.
    Is it possible I have a disk corruption on the reserve partition that is not found and repaired by the chkdsk/r C: operation?
    I'm thinking about saving all important user files and rebooting to the factory settings, but if the reserver partition is damaged I might end up with a dead 4-month-old PC.
    I would greatly appreciate any help or advice as to how to get these backups going again.

    I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode.  Both times it indicated a failed read test on the HDD. The last two tests also failed.  I forget what those tests were called.
    I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

  • I/o device error when trying to use windows 7 backup to an external hard drive

    I have a Windows 7 operating system.  The computer was running very slowly so I used the systems diagnostics at startup and received short DST failed with a failure id of 6C2NXD-53Q713-XD002J-60RL03 for the hard disk test,  the start up test, the
    run-in test.  Each test showed memory test passed and smart check passed.  In researching the error it states that my hard drive is failing or perhaps some program is causing the error.  I tried removing some programs I thought may be the issue.
     Didn't work.
    I have tried using the Windows 7 backup but the backup reached about 67% then states backup not completed i/o device error.  I am trying to back up my files to a brand new Toshiba USB 3.0 & 2.0 external hard drive with 1.0 TB/To.
    I have gone to start then computer and it shows the device.  It also shows some files on it.  The backup fails when it it trying to do a system image as far as I can tell by reading the progress details.  The Toshiba device says that it is
    working fine and is already formatted to NTFS.   
    What else should I check or do?  My computer is also now popping up with a window telling me a backup is needed before the hard drive fails.  It pops up with this message at the same time I am trying to do the backup (the backup is already processing).
    Thank  you

    Hi,
    Have you performed a disk check on your PC? More details, please check here:
    How to Run Disk Check in Windows 7
    Regarding the i/o device error, have you received any specific error IDs like
    0x8007045D?
    In addition, please also take a verify to see if the external disk is Advanced Format Disks(Some types may not compatible with Windows 7):
    For example Run fsutil fsinfo ntfsinfo f:
     to check the
    bytes per physical sector
    of the external disk drive.
    More information, please see:
    An update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with Advanced Format Disks is available
    Hope this may help,
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Getting an "uncaught exception" error when trying to Scan a document via D-Link DPR-1260 print sever (worked in prior versions of Firefox)

    I'm using the interface (Firmware V1.24) on a D-Link DPR-1260 Print Server, connected to an Epson Printer/Scanner. When I hit the "Scan" button, I get an "uncaught exception" error. This firmware has been working for years (at least back to Firefox 3.x), but no longer works with Firefox V6.0

    Nothing really, but... The firmware runs in a web browser. It's been working fine for years and no longer works since I got the latest version of Firefox. It does, however, still work in IE (V9) so I do have a way to use my existing hardware.
    I tried D-Link and Google search for any information about this, but came up empty. I was hoping that there might be similar problems with other software with Firefox 6.0.2 and someone might have a work-around or there might be a patch coming soon. At the very least, someone associated with Firefox might be interested that they've apparently broken something that used to work.

  • Getting OERR: ORA 12705 error when trying to connect.

    I have tomcat running on red hat and I'm trying to connect to a remote server running Oracle 10g using a thin driver. But I keep getting this error when I try to connect. I've tried setting NLS_LANG=AMERICAN_AMERICA.UTF8, NLS_LANG=AMERICAN_AMERICA.US7ASCII, and NLS_LANG=.
    I'm not doing any ALTER SESSIONS. I wrote a test app and all it does is connect and does 1 simple select query.

    Unset it on the client and try again.
    Also see if Note:294104.1 will help you

  • Why do I get the 'PowerPC code' error when trying to launch an Intel-based app from a CD?

    When trying to launch a Flash-based app from a CD on my Mac Book Pro, I get the "PowerPC apps are no longer supported" error. Yet the app is not built with PowerPC code.
    This also happened with Microsoft Office programs soon after I upgraded to OSX Lion, but someone was able to solve that for me.

    It's just a free disc from a photo magazine, but the app runs fine on a Mac Pro running 10.7.3. Could it be hardware related?
    I have actually asked this on behalf of a reader (I work for the company that makes the magazine) who is experiencing this problem, I just can't find any reason why the error would display in these circumstances. I apologise if this is against the community's usual practise - I just want to sort this guy out!
    The app on the disc is compiled using MDM Zinc, but like I said it runs a-OK on Lion everywhere else.
    Any help would be gratefully received and appreciated!

Maybe you are looking for