Getting INVALID_OPERATION while using UTL file

Hi,
I have a procedure which makes different UTL files i.e data file, error file and log file for a Purchase order. These 3 sets of files are made for every purchase order.
So suppose in a cursor i find that there are 10 Purchase orders to process, then it should create 30 UTL files 10 sets of 3 files.
But when i run this procedure, after processing 3 PO's i.e after creating 9 files i get INVALID_OPERATION error.
So lets say i have 10 PO's 1 to 10 , i run for first time PO 1,2 and 3 utl files are created and then i get error. Then when i run it again processes PO number 4 to 6 and then again error...
So i want to know is there any restriction on number of UTL files you can create in a single procedure. i want urgent help, appreciate ur quick replies on this matter.
thanks,
Dipin

Hi,
There could be several reasons for this...
1. In inti ora file, what utl file directory was specified? is it 'C:\PLXML\DBDOM'? if not check.
2. Do u have C:\PLXML\DBDOM\Testfile.txt in your directory?
3. If you have above file in that directory and you have opened that file for writing purpose, close that.
Ur program looks ok. Also, dbms_output.put_line will display 255 charcters only(at least in 7.3).
Koti.
null

Similar Messages

Getting error while using UTL files

hi All,
I'm getting following error -
ORA-29282: invalid file ID ORA-06512: at "SYS.UTL_FILE", line 774 ORA-06512: at "IMPORT_NEW", line 781 ORA-01722: invalid number
To used UTL i have done following steps -
1. created directory
2. grant read, write to that directory from sys
but every time I'm getting above error.
Can any one tell me, where am I going wrong?
Subir

here is the basic code...
CREATE OR REPLACE PROCEDURE import_new
begin
logfilename :=
'DnB_Source_'
|| datasetversionid
|| '-'
|| TO_CHAR (SYSDATE, 'YYMMDDHH24MI')
|| '.log';
vsfile := UTL_FILE.fopen ('import_LOG', logfilename, 'w');
UTL_FILE.put_line
(vsfile,
'No treatments have been done, Data are already in Source area.'
UTL_FILE.put_line (vsfile, '');
UTL_FILE.put_line (vsfile,
'Run began on '
|| TO_CHAR (beginrun, 'DAY MON DD HH24:MI:SS')
UTL_FILE.put_line (vsfile,
'Run ended on '
|| TO_CHAR (endrun, 'DAY MON DD HH24:MI:SS')
UTL_FILE.fclose (vsfile);
exection
END import_dnb_new

Getting Error while using LKM File to Oracle(SQLLDR) KM in ODI

Hi All ,
Could anyone please help me out on this error which i am getting while using LKM File to Oracle(SQLLDR)
My Scenario :
1. I have my CSV file created in one location with some records .
2. Created a new interface having this CSV file as source(File Technology) and Table as target (Oracle technology)
3. Here i want to get the contents from csv and store into the target table by using SQLLDR .For that i am using this KM- LKM File to Oracle(SQLLDR)
4. By Executing the Interface i am getting following error at step 6 -call sqlldr
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 22, in <module>
Load Error: See E:\demo1\file/SALES.log for details
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 22, in <module>
Load Error: See E:\demo1\file/SALES.log for details
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.doRaise(PyException.java:219)
at org.python.core.Py.makeException(Py.java:1166)
at org.python.core.Py.makeException(Py.java:1170)
at org.python.pycode._pyx2.f$0(<string>:59)
at org.python.pycode._pyx2.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
... 19 more
Here the sales.log file is not created in the above directory .I am not getting where it is actually went wrong.
I searched for the solution and i could not find any.Please help me out as it is high priority for me.
I tried to run SQL*Loader through command prompt and i am able to generate the data in the target table and not getting it through ODI.
Atleast is there any workaround .Please suggest me.
Environment Details: ODI_11.1.1.7.0, Oracle DB 11g
Thanks,
keerthi

Which agent are you using to execute?
Standalone? If standalone, did you start it with OPMN? I've seen such issues with standalone agent started with OPMN.
Generally these kind of issues occur when you try to run with standalone agent started with OPMN.
Because OPMN does not have access to the environment shell variables PATH or ORACLE_HOME and therefore the sqlldr.exe binary (or other Oracle product binary) is not found for execution.
In this case, you need to specify PATH and ORACLE_HOME variables in opmn.xml file like below for your agent(say "MyStandaloneAgent" in this case)
<ias-component id="MyStandaloneAgent">
<process-type id="odiagent" module-id="CUSTOM">
<environment>
<variable id="ORACLE_HOME" value="C:\oracle\product\11.2.0\client_1"/>
<variable id="PATH" value="C:\oracle\product\11.2.0\client_1\BIN;$PATH"/>
After that, start and stop the agent and try the execution once again.

Error using UTL File

Hi,
I am using UTL file to export data to an external file and getting an error which i am unable to reslove... Can anyone help me with this
SQL> create or replace
2 procedure MEXICO_NAFTA_CERTIFICATE_EXT (
3 f_org_id varchar2,
4 f_customer_nbr_base varchar2,
5 f_customer_nbr_sufx varchar2,
6 f_year VARCHAR2)
7 is
8 output_file utl_file.file_type;
9 o_filename VARCHAR2(50):= 'MEXICO_NAFTA_CERTIFICATE_EXT.txt';
10 o_DataDir CONSTANT VARCHAR2 (30) := '/d014/oradata/temp';
11 v_CERTIFICATE_NBR fta.SAP_CERTIFICATES_EXTRACT_VIEW.CERTIFICATE_NBR%type;
12 v_PART171 fta.SAP_CERTIFICATES_EXTRACT_VIEW.PART171%type;
13 v_INACTIVE_IND fta.SAP_CERTIFICATES_EXTRACT_VIEW.INACTIVE_IND%type;
14 v_HTS_CDE fta.SAP_CERTIFICATES_EXTRACT_VIEW.HTS_CDE%type;
15 v_ORIGINATING_IND fta.SAP_CERTIFICATES_EXTRACT_VIEW.ORIGINATING_IND%type;
16 v_ISO_COUNTRY_CDE fta.SAP_CERTIFICATES_EXTRACT_VIEW.ISO_COUNTRY_CDE%type;
17 v_BASIS_CDE fta.SAP_CERTIFICATES_EXTRACT_VIEW.BASIS_CDE%type;
18 v_PRODUCER_CDE fta.SAP_CERTIFICATES_EXTRACT_VIEW.PRODUCER_CDE%type;
19 v_CERT_CDE fta.SAP_CERTIFICATES_EXTRACT_VIEW.CERT_CDE%type;
20 v_REGIONAL_VALUE_CONTENT_CDE fta.SAP_CERTIFICATES_EXTRACT_VIEW.REGIONAL_VALUE_CONTENT_CDE%type;
21 v_PART_NBR fta.SAP_CERTIFICATES_EXTRACT_VIEW.PART_NBR%type;
22 v_EFFECTIVE_DATE fta.SAP_CERTIFICATES_EXTRACT_VIEW.EFFECTIVE_DATE%type;
23 v_EFFECTIVE_FROM_DATE fta.SAP_CERTIFICATES_EXTRACT_VIEW.EFFECTIVE_FROM_DATE%type;
24 v_EFFECTIVE_TO_DATE fta.SAP_CERTIFICATES_EXTRACT_VIEW.EFFECTIVE_TO_DATE%type;
25 v_TRANSACTION_DATE fta.SAP_CERTIFICATES_EXTRACT_VIEW.TRANSACTION_DATE%type;
26
27
28 CURSOR Cert_ext IS select certificate_nbr ,
29 part171,
30 inactive_ind,
31 hts_cde,
32 originating_ind,
33 iso_country_cde,
34 basis_cde,
35 producer_cde,
36 cert_cde,
37 regional_value_content_cde,
38 part_nbr,
39 effective_date,
40 effective_from_date,
41 effective_to_date,
42 transaction_date
43 from fta.SAP_CERTIFICATES_EXTRACT_VIEW
44 where org_id= f_org_id AND
45 customer_nbr_base= f_customer_nbr_base AND
46 customer_nbr_sufx = f_customer_nbr_sufx AND
47 to_char(effective_from_date, 'yy') = f_year AND
48 to_char(effective_to_date, 'yy') = f_year;
49
50 begin
51
52 output_File := UTL_FILE.FOPEN (o_DataDir, o_FileName, 'w');
53
54 OPEN Cert_ext;
55 loop
56
57 fetch Cert_ext into v_CERTIFICATE_NBR ,
58 v_PART171 ,
59 v_INACTIVE_IND,
60 v_HTS_CDE ,
61 v_ORIGINATING_IND ,
62 v_ISO_COUNTRY_CDE ,
63 v_BASIS_CDE ,
64 v_PRODUCER_CDE ,
65 v_CERT_CDE ,
66 v_REGIONAL_VALUE_CONTENT_CDE ,
67 v_PART_NBR,
68 v_effective_date,
69 v_effective_from_date,
70 v_effective_to_date,
71 v_transaction_date ;
72
73 UTL_FILE.PUT_LINE (output_File, v_CERTIFICATE_NBR || ' '||
74 v_PART171 || ' '||
75 v_INACTIVE_IND || ' '||
76 v_HTS_CDE || ' '||
77 v_ORIGINATING_IND || ' '||
78 v_ISO_COUNTRY_CDE || ' '||
79 v_BASIS_CDE || ' '||
80 v_PRODUCER_CDE || ' '||
81 v_CERT_CDE || ' '||
82 v_REGIONAL_VALUE_CONTENT_CDE || ' '||
83 v_PART_NBR || ' '||
84 to_char(v_EFFECTIVE_DATE, 'mm-dd-yy') || ' '||
85 to_char(v_EFFECTIVE_FROM_DATE, 'mm-dd-yy') || ' '||
86 to_char(v_EFFECTIVE_TO_DATE, 'mm-dd-yy') || ' '||
87 to_char(v_TRANSACTION_DATE, 'mm-dd-yy'));
88
89 UTL_FILE.FCLOSE (output_File);
90 DBMS_OUTPUT.PUT_LINE ('Data Extracted');
91 end loop;
92 close Cert_ext;
93 END MEXICO_NAFTA_CERTIFICATE_EXT;
94 /
Procedure created.
SQL> declare
2 begin
3 MEXICO_NAFTA_CERTIFICATE_EXT('0048', '00254101', '11', '03');
4 end;
5 /
Data Extracted
declare
ERROR at line 1:
ORA-29282: invalid file ID
ORA-06512: at "SYS.UTL_FILE", line 774
ORA-06512: at "FTA_SOURCE.MEXICO_NAFTA_CERTIFICATE_EXT", line 72
ORA-06512: at line 3

what is the datatype of your column org_id for the table fta.SAP_CERTIFICATES_EXTRACT_VIEW? also try to put this exceptions to see what might be the exact cause of the error.
EXCEPTION
    WHEN utl_file.invalid_mode THEN
      RAISE_APPLICATION_ERROR (-20051, 'Invalid Mode Parameter');
    WHEN utl_file.invalid_path THEN
      RAISE_APPLICATION_ERROR (-20052, 'Invalid File Location');
    WHEN utl_file.invalid_filehandle THEN
      RAISE_APPLICATION_ERROR (-20053, 'Invalid Filehandle');
    WHEN utl_file.invalid_operation THEN
      RAISE_APPLICATION_ERROR (-20054, 'Invalid Operation');
    WHEN utl_file.read_error THEN
      RAISE_APPLICATION_ERROR (-20055, 'Read Error');
    WHEN utl_file.internal_error THEN
      RAISE_APPLICATION_ERROR (-20057, 'Internal Error');
    WHEN utl_file.charsetmismatch THEN
      RAISE_APPLICATION_ERROR (-20058, 'Opened With FOPEN_NCHAR But Later I/O Inconsistent');
    WHEN utl_file.file_open THEN
      RAISE_APPLICATION_ERROR (-20059, 'File Already Opened');
    WHEN utl_file.invalid_maxlinesize THEN
      RAISE_APPLICATION_ERROR(-20060,'Line Size Exceeds 32K');
    WHEN utl_file.invalid_filename THEN
      RAISE_APPLICATION_ERROR (-20061, 'Invalid File Name');
    WHEN utl_file.access_denied THEN
      RAISE_APPLICATION_ERROR (-20062, 'File Access Denied By');
    WHEN utl_file.invalid_offset THEN
      RAISE_APPLICATION_ERROR (-20063,'FSEEK Param Less Than 0');
    WHEN others THEN
      RAISE_APPLICATION_ERROR (-20099, 'Unknown UTL_FILE Error');

Error in loading data into essbase while using Rule file through ODI

Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

Getting error while loading Flat File

Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
path

Hi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy

Can we define cursors from in procedure while using .procedure file?

Hi Team,
Can we define cursors from in procedure while using .procedure file?
I have a catalog procedure in which am using cursors and it is working fine. But while trying to create the same procedure using .procedure , the validation is failing with "An error occurred while parsing your procedure".
Request your suggestions.
Regards,
Krishna Tangudu

Hi Krishna,
I also tried to find the validation for procedure and failed. What was on my mind when I posted earlier was related to Window -> Properties -> SAP HANA -> Modeler -> Validation Rules but this is not the same for procedure.
Also the validation error seems to not being raised by Studio but the server, so it's not a frontend validation anyway.
Trying to replicate your error I create two procedures here and both worked fine with cursor.
The behavior you found was the same I found, the .procedure goes to repository and _SYS_BIC after activation and .hdbprocedure goes to catalog only.
As far as I understood as you are moving from catalog (manually) and it worked on catalog (.hdbprocedure), I could check the declaration of table types of header as it's the main difference.
Despite this investigation of declaration, you can try create it on modeler direct and see what you found on .procedure created. This can speed up investigation.
Regards, Fernando Da Rós
BTW: I'm faced an very strange behavior that each caracter I type on .procedure or .hdbprocedure freezes studio by around 15 seconds ?!?!?!?! (studio rev73)

Is it common that iPhone purchased in other Country may get heated while using 3G network ?

Is it common that iPhone purchased in other Country may get heated while using 3G network ?
My iPhone5 gets heated when I am on 3G Network and this device is purchased in another country which I am not a Resident-of.
Please assist. Thanks !

About ControlPlane

My iphone 5 gets hot while using it and while charging too.... Please help me what should i do?? Should i replace the battery....?? Because it gets hot even within 5 minutes also.... And it is happening from 2 weeks daily.

My iphone 5 gets hot while using it and while charging too.... Please help me what should i do?? Should i replace the battery....?? Because it gets hot even within 5 minutes also.... And it is happening from 2 weeks daily.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Getting error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure

I have create Logic App under Azure App Services, I am getting
error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
Following are the screen shots:
Login App Connector Diagram:
hema

Marking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
http://twitter.com/joshtwist

Ipod touch 4 gets hot while using some apps like angry birds?

Is it normal for the upper back of the ipod touch 4 to get hot while using some apps like angry birds? Is this a potential battery problem? It doesnt get hot while charging or playing songs... Just when using some game apps. I assume that it has something to do with battery drain, should I be concerned?

When the iPod is used heavily like for games it is norma for the iPod to get warm. Unless you hav short battery life I would not be concerned.

I have 5s and is getting heat while using it and durin charging

I have 5s 7.0.4 (64G) and is getting heat while using it and durin charging

thanks dear friend,
but from Apple - Batteries - Notebooks:
Apple does not recommend leaving your portable plugged in all the time !!!
it's opposite of what you saying !

IPad is getting heat while using skype

Hi
Please advice me a solution, my iPad is getting heat while using skype.
Thanks
Satya

do not use anyother app while you are using skype , its not your software fault problem is regarding to your device,physically check your device from where you bought it

Getting INVALID_OPERATION while using UTL file

Similar Messages

Maybe you are looking for