Getting "line disconnected" error message when trying to monitor

Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer. Anyone else have this issue? Any suggestions on how to fix? I have reconfigured each camera with the router but still having the error message. I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras. It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup. However, starting on day three and on, it has worked very well.
The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs. All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about. I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days. It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

Similar Messages

TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities

Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. Could not complete backup to media share. The network backup disk does not support the required AFP feat

Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

On My Mac Pro Getting an unknown error message when trying to update apps

On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
Settings>Store>Apple ID - tap your ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sign in again -Settings>Store>Apple ID - sign in.
If that doesn't work either, reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I get the following error message when trying to instal in copy: "Creative Cloud Installer" can't be opened because the identity of the developer cannot be confirmed.

I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

I get the following error message when trying to sync "could not be synced because the sync session failed to finish"

hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

HT201210 I get the following error message when trying to restore seeting: unexpected error occurred (3014). anyone will be able to help please? thanks

I get the following error message when trying to restore settings on my iphone:settings could be restored due to an unexpected error occurred (3014). anyone will be able to help please? thanks

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

Hi! Hoping someone might be able to help with an odd problem. I haven't found anything in the forums or the web that match my symptoms.
I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that. I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop. I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements. To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project). This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD. But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message. I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
I typically build both DVD and Blu-Ray images from the same material in the same project. I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built). And as I mentioned before, this is the first project on which I've even seen this layer break message.
Any suggestions would be greatly appreciated! I'd rather not recreate the project from scratch, but I'm worried that I may have to.
Thanks
Jon

The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
Be sure you "run as administrator" for dual layer projects.
Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
Also see these posts:
Neil Wilkes
http://forums.adobe.com/message/3466255#3466255
Neil Wilkes
http://forums.adobe.com/message/4054265#4054265
Neil Wilkes
http://forums.adobe.com/message/4054269#4054269
Jon Geddes
http://forums.adobe.com/message/4002647#4002647
shuchi shrivastava
http://forums.adobe.com/message/3905911#3905911
Jon Geddes and Neil Wilkes
http://forums.adobe.com/message/4003221#4003221

I keep getting time out error messages when trying to install flash player

I've put a new install of Win 7 64 bit pro onto a new hdd. All other s/w has worked fine and not given me any issues except for adobe flash player. If I just install FP 11 it installs ok. Issue happens when I try to install the "other" version for Steam. The install screen stops at 11%, shoots up to 47%, then I get a timeout error message. If I uninstall and install the Steam version 1st it works then the regular version gets the same timeout error. I have folllowed all advice from previous threads on this topic such as disabling firewall (I use Panda), a clean adobe install using the flash player uninstall program and removing reader as well then going through the registry and removing all mention of adobe, etc, etc.
I found a partial way around this. I installed the Steam version of flash player, then found a website that I could download flash player 10 executable from. I was able to run that and get both versions of flash player going on my system. Then the flash player went and found the update to version 11. I've just tried to install that and I end up with the exact same error messages all over again.
Is there website that I can download the executable file for flash player 11 from or a link to it on the adobe website?

I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

I am getting the following error message when trying to open a link to a folder

"This file is set to be launched by this PDF file. This is currently disallowed by your system administrator."
Currently I am using Reader 9, I was using Reader 7 earlier today and the link opened the folder with no problem. Nothing has been changed on the PDF file containing the link, nothing has been changed in the link, and if I go to another computer in the office that is still running Reader 7 the folder still opens. I also tried another computer in the office running Reader 9, the folder doesn't open, and I get the same error message.
Any ideas on how to fix this issue would be great. Thanks

Hi,
The issue that you are referring to maybe because of a fix provided by Adobe to prevent any external attacks. The following links may be of help to you:
http://www.adobe.com/support/security/bulletins/apsb10-15.html
http://news.softpedia.com/news/Adobe-Finally-Fixes-Launch-Bug-145757.shtml
To allow certain files of yours to be able to open external files and operate witout restriction, you can try and add the files to the Privileged locations section and the restrictions on the files will be lifted:
1. Open Adobe Reader 9.4.0 and goto Edit | Preferences
2. From the Left side pane, goto Security (Enhanced)
3. Click on Add File button and add the file for which you want the restrictions to be lifted. Click on OK to close the dialogs and relaunch Adobe Reader. This will enable you to open external attachments as well as allow JavaScripts to be executed from the PDF file mentioned.

I get an Internal Error message when trying to access Hotmail

When I try to access my Hotmail inbox, I get an Internal Error message Reference #3.48406ca.1327362199.109cf5de. I can still get my mail through Internet Explorer. Please, only simple replies, I am a senior and not up with all the technical stuff, thanks

I fixed it myself!

Getting "line disconnected" error message when trying to monitor

Similar Messages

Maybe you are looking for