Getting mx:DateField to be set a date on load.

Is it possible to have a custom value already in the
DateField when you load the page? If so, how do you do it.
I can't find an attribute that works. Also what format must I
put the date in for it to work?
Thanks in advance,
Max

Hi,
Try the selectedDate property, it accepts Date type. Please
find more details on selectedDate property at the URL below.
http://livedocs.adobe.com/flex/3/langref/mx/controls/DateField.html#selectedDate
Hope this helps.

Similar Messages

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

MyRio Cannot Communicate When the Getting Started Wizard Tries to Set Date and Time

I cannot seem to get MyRio to communicate with my computer. I have installed all the items on both discs and applied any updates that it asked me to do. I plug in the MyRio, the device window pops up and I click the Getting Started Wizard. The myRio is found by the computer and I click on it. It says checking software, then asks me to rename it. I do so and then it attempts to set the date and time. At this point it says it cannot communicate with the myRio and to check that the power supply and USB are plugged in, which are obviously connected since the computer was able to find the myRio in the first place.
NI MAX can see the myRio, says that it is in "Safe Mode (Software not installed)."
There may be a problem with conflicting LabViews, since I had 2012 originally before installing the 2014 packages. Does anyone know if the myRio discs are installing the full LabView 2014, or just packages for LabView 2014 that will not work without first installing the full LabView 2014? Or is there a quick fix for this?
Any help is appreciated.

There is a separate message board Academic Hardware Products (ELVIS, myDAQ, myRIO)

Getting a set type data to CRMD_ORDER

Hi Experts,
I have created a new settype which has 2 attributes .I need to show these attributes in Sales Order Line Item level.
I know there is a BADI CRM_CUSTOMER_I_BADI which gives me the freedom to show my own screen in the sales order screen(additiional tab).
I need to show the details in an existing tab. Is there a way to acheive this?
Please help.
Thanks

Hi,
For Example Enhancing product workbench Commpr01 in CRM for any Product category or somthing, we will use set type concept in CRM,for creating set types we need to go EEWB workbench and create .while creation of set types in EEWB itself it will have one option "Create BW extractor".So just we need to select that option system will create set type data source for the same.Delta will be based on Change pointer and it will use push technology.so just u need to ask your CRM IT team to select that option .u dont need to create data source in RSO2.
See the properties of Set type data source
Extraction Methods - F1
Extractor           - COM_GENERIC_FULL_UPLOAD(its common for all data sources generated through set type concept)
Extract Structure    ZZSET*
Gen. Interface       X.
Delta Process        AIM
Delta Test Possible X
DeltaInit Simu       1
U can see these propeties in RSA2
Regards,
Jyothi

Trying to programmatically set the data-source for a Crystal reports report.

I've got the following existing procedure that I need to add to in order to programmatically set the data-source (server, database, username, and password) for a Crystal reports report.
I added the connectionInfo parts, but can’t figure out how to attach this to the existing
this._report object.
This is currently getting the connection data from the report file, but I now need to populate this connection data from a 'config.xml' text file.
Am I trying to do this all wrong?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using CrystalDecisions.CrystalReports.Engine;
using WGS.Reports.Reports;
using CrystalDecisions.Shared;
using WGS.Reports.Forms;
namespace WGS.Reports
public class ReportService
ReportClass _report;
ParameterFields paramFields;
ConnectionInfo connectionInfo; // <- I added this
public ReportService()
public void DisplayReport(string reportName, int allocationNo)
if (reportName.ToLower() == "allocationexceptions")
this._report = new AllocationExceptions();
PrepareConnection(); // <- I added this
PrepareAllocationExceptionReport(allocationNo);
this.DisplayReport();
private void PrepareConnection() // <- I added this
//test - these will come from the config.xml file
this.connectionInfo = new ConnectionInfo();
this.connectionInfo.ServerName = "testserv\\test";
this.connectionInfo.DatabaseName = "testdb";
this.connectionInfo.UserID = "testuser";
this.connectionInfo.Password = "test";
this.connectionInfo.Type = ConnectionInfoType.SQL;
private void PrepareAllocationExceptionReport(int allocationNo)
this.paramFields = new ParameterFields();
this.paramFields.Clear();
ParameterField paramField = new ParameterField { ParameterFieldName = "@AllocationNo" };
ParameterDiscreteValue discreteVal = new ParameterDiscreteValue { Value = allocationNo };
paramField.CurrentValues.Add(discreteVal);
paramFields.Add(paramField);
private void DisplayReport()
frmReportViewer showReport = new frmReportViewer();
showReport.ReportViewer.ReportSource = this._report;
showReport.ReportViewer.ParameterFieldInfo = paramFields;
showReport.ShowDialog();
showReport.Dispose();
Any help would be much appreciated.

Hi Garry,
Please post SAP Crystal Reports questions in their own forums here:
SAP Crystal Reports, version for Visual Studio
We don't provide support for this control now. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

Problem while having a large set of data to work on!

Hi,
I am facing great problem with processing large set of data. I have a requirement in which i'm supposed to generate a report.
I have a table and a MView, which i have joined to reduce the number of records to process. The MView holds 200,00,000 records while the table 18,00,000. Based on join conditions and where clause i'm able to break down the useful data to approx 4,50,000 and i'm getting 8 of my report columns from this join. I'm dumping these records into the table from where i'll be generating the report by spooling.
Below is the block which takes 12mins to insert into the report table MY_ACCOUNT_PHOTON_DUMP:
begin
dbms_output.put_line(to_char(sysdate,'hh24:mi:ss'));
insert into MY_ACCOUNT_PHOTON_DUMP --- Report table
(SUBSCR_NO, ACCOUNT_NO, AREA_CODE, DEL_NO, CIRCLE, REGISTRATION_DT, EMAIL_ID, ALT_CNTCT_NO)
select crm.SUBSCR_NO, crm.ACCOUNT_NO, crm.AREA_CODE, crm.DEL_NO, crm.CIRCLE_ID,
aa.CREATED_DATE, aa.EMAIL_ID, aa.ALTERNATE_CONTACT
from MV_CRM_SUBS_DTLS crm, --- MView
(select /*+ ALL_ROWS */ A.ALTERNATE_CONTACT, A.CREATED_DATE, A.EMAIL_ID, B.SUBSCR_NO
from MCCI_PROFILE_DTLS a, MCCI_PROFILE_SUBSCR_DTLS b
where A.PROFILE_ID = B.PROFILE_ID
and B.ACE_STATUS = 'N'
) aa --- Join of two tables giviing me 18,00,000 recs
where crm.SUBSCR_NO = aa.SUBSCR_NO
and crm.SRVC_TYPE_ID = '125'
and crm.END_DT IS NULL;
INTERNET_METER_TABLE_PROC_1('MCCIPRD','MY_ACCOUNT_PHOTON_DUMP'); --- calling procedure to analyze the report table
COMMIT;
dbms_output.put_line(to_char(sysdate,'hh24:mi:ss'));
end; --- 12 min 04 secFor the rest of the 13 columns required i am running a block which has a FOR UPDATE cursor on the report table:
declare
cursor cur is
select SUBSCR_NO, ACCOUNT_NO, AREA_CODE, DEL_NO,
CIRCLE, REGISTRATION_DT, EMAIL_ID, ALT_CNTCT_NO
from MCCIPRD.MY_ACCOUNT_PHOTON_DUMP --where ACCOUNT_NO = 901237064
for update of
MRKT_SEGMNT, AON, ONLINE_PAY, PAID_AMNT, E_BILL, ECS, BILLED_AMNT,
SRVC_TAX, BILL_PLAN, USAGE_IN_MB, USAGE_IN_MIN, NO_OF_LOGIN, PHOTON_TYPE;
v_aon VARCHAR2(10) := NULL;
v_online_pay VARCHAR2(10) := NULL;
v_ebill VARCHAR2(10) := NULL;
v_mkt_sgmnt VARCHAR2(50) := NULL;
v_phtn_type VARCHAR2(50) := NULL;
v_login NUMBER(10) := 0;
v_paid_amnt VARCHAR2(50) := NULL;
v_ecs VARCHAR2(10) := NULL;
v_bill_plan VARCHAR2(100):= NULL;
v_billed_amnt VARCHAR2(10) := NULL;
v_srvc_tx_amnt VARCHAR2(10) := NULL;
v_usg_mb NUMBER(10) := NULL;
v_usg_min NUMBER(10) := NULL;
begin
dbms_output.put_line(to_char(sysdate,'hh24:mi:ss'));
for rec in cur loop
begin
select apps.TTL_GET_DEL_AON@MCCI_TO_PRD591(rec.ACCOUNT_NO, rec.DEL_NO, rec.CIRCLE)
into v_aon from dual;
exception
when others then
v_aon := 'NA';
end;
SELECT DECODE(COUNT(*),0,'NO','YES') into v_online_pay
FROM TTL_DESCRIPTIONS@MCCI_TO_PRD591
WHERE DESCRIPTION_CODE IN(SELECT DESCRIPTION_CODE FROM TTL_BMF_TRANS_DESCR@MCCI_TO_PRD591
WHERE BMF_TRANS_TYPE
IN (SELECT BMF_TRANS_TYPE FROM
TTL_BMF@MCCI_TO_PRD591 WHERE ACCOUNT_NO = rec.ACCOUNT_NO
AND POST_DATE BETWEEN
TO_DATE('01-'||TO_CHAR(SYSDATE,'MM-YYYY'),'DD-MM-YYYY') AND SYSDATE
AND DESCRIPTION_TEXT IN (select DESCRIPTION from fnd_lookup_values@MCCI_TO_PRD591 where
LOOKUP_TYPE='TTL_ONLINE_PAYMENT');
SELECT decode(count( *),0,'NO','YES') into v_ebill
FROM TTL_CUST_ADD_DTLS@MCCI_TO_PRD591
WHERE CUST_ACCT_NBR = rec.ACCOUNT_NO
AND UPPER(CUSTOMER_PREF_MODE) ='EMAIL';
begin
select ACC_SUB_CAT_DESC into v_mkt_sgmnt
from ttl_cust_dtls@MCCI_TO_PRD591 a, TTL_ACCOUNT_CATEGORIES@MCCI_TO_PRD591 b
where a.CUST_ACCT_NBR = rec.ACCOUNT_NO
and a.market_code = b.ACC_SUB_CAT;
exception
when others then
v_mkt_sgmnt := 'NA';
end;
begin
select nvl(sum(TRANS_AMOUNT),0) into v_paid_amnt
from ttl_bmf@MCCI_TO_PRD591
where account_no = rec.ACCOUNT_NO
AND POST_DATE
BETWEEN TO_DATE('01-'||TO_CHAR(SYSDATE,'MM-YYYY'),'DD-MM-YYYY')
AND SYSDATE;
exception
when others then
v_paid_amnt := 'NA';
end;
SELECT decode(count(1),0,'NO','YES') into v_ecs
from ts.Billdesk_Registration_MV@MCCI_TO_PRD591 where ACCOUNT_NO = rec.ACCOUNT_NO
and UPPER(REGISTRATION_TYPE ) = 'ECS';
SELECT decode(COUNT(*),0,'PHOTON WHIZ','PHOTON PLUS') into v_phtn_type
FROM ts.ttl_cust_ord_prdt_dtls@MCCI_TO_PRD591 A, ttl_product_mstr@MCCI_TO_PRD591 b
WHERE A.SUBSCRIBER_NBR = rec.SUBSCR_NO
and (A.prdt_disconnection_date IS NULL OR A.prdt_disconnection_date > SYSDATE )
AND A.prdt_disc_flag = 'N'
AND A.prdt_nbr = b.product_number
AND A.prdt_type_id = b.prouduct_type_id
AND b.first_level LIKE 'Feature%'
AND UPPER (b.product_desc) LIKE '%HSIA%';
SELECT count(1) into v_login
FROM MCCIPRD.MYACCOUNT_SESSION_INFO a
WHERE (A.DEL_NO = rec.DEL_NO or A.DEL_NO = ltrim(rec.AREA_CODE,'0')||rec.DEL_NO)
AND to_char(A.LOGIN_TIME,'Mon-YYYY') = to_char(sysdate-5,'Mon-YYYY');
begin
select PACKAGE_NAME, BILLED_AMOUNT, SERVICE_TAX_AMOUNT, USAGE_IN_MB, USAGE_IN_MIN
into v_bill_plan, v_billed_amnt, v_srvc_tx_amnt, v_usg_mb, v_usg_min from
(select rank() over(order by STATEMENT_DATE desc) rk,
PACKAGE_NAME, USAGE_IN_MB, USAGE_IN_MIN
nvl(BILLED_AMOUNT,'0') BILLED_AMOUNT, NVL(SRVC_TAX_AMNT,'0') SERVICE_TAX_AMOUNT
from MCCIPRD.MCCI_IM_BILLED_DATA
where (DEL_NUM = rec.DEL_NO or DEL_NUM = ltrim(rec.AREA_CODE,'0')||rec.DEL_NO)
and STATEMENT_DATE like '%'||to_char(SYSDATE,'Mon-YY')||'%')
where rk = 1;
exception
when others then
v_bill_plan := 'NA';
v_billed_amnt := '0';
v_srvc_tx_amnt := '0';
v_usg_mb := 0;
v_usg_min := 0;
end;
-- UPDATE THE DUMP TABLE --
update MCCIPRD.MY_ACCOUNT_PHOTON_DUMP
set MRKT_SEGMNT = v_mkt_sgmnt, AON = v_aon, ONLINE_PAY = v_online_pay, PAID_AMNT = v_paid_amnt,
E_BILL = v_ebill, ECS = v_ecs, BILLED_AMNT = v_billed_amnt, SRVC_TAX = v_srvc_tx_amnt,
BILL_PLAN = v_bill_plan, USAGE_IN_MB = v_usg_mb, USAGE_IN_MIN = v_usg_min, NO_OF_LOGIN = v_login,
PHOTON_TYPE = v_phtn_type
where current of cur;
end loop;
COMMIT;
dbms_output.put_line(to_char(sysdate,'hh24:mi:ss'));
exception when others then
dbms_output.put_line(SQLCODE||'::'||SQLERRM);
end;The report takes >6hrs. I know that most of the SELECT queries have ACCOUNT_NO as WHERE clause and can be joined, but when i joining few of these blocks with the initial INSERT query it was no better.
The individual queries within the cursor loop dont take more then 0.3 sec to execute.
I'm using the FOR UPDATE as i know that the report table is being used solely for this purpose.
Can somebody plz help me with this, i'm in desperate need of good advice here.
Thanks!!
Edited by: user11089213 on Aug 30, 2011 12:01 AM

Hi,
Below is the explain plan for the original query:
select /*+ ALL_ROWS */ crm.SUBSCR_NO, crm.ACCOUNT_NO, ltrim(crm.AREA_CODE,'0'), crm.DEL_NO, >crm.CIRCLE_ID
from MV_CRM_SUBS_DTLS crm,
        (select /*+ ALL_ROWS */ A.ALTERNATE_CONTACT, A.CREATED_DATE, A.EMAIL_ID, B.SUBSCR_NO
        from MCCIPRD.MCCI_PROFILE_DTLS a, MCCIPRD.MCCI_PROFILE_SUBSCR_DTLS b
        where A.PROFILE_ID = B.PROFILE_ID
        and   B.ACE_STATUS = 'N'
        ) aa
where crm.SUBSCR_NO    = aa.SUBSCR_NO
and   crm.SRVC_TYPE_ID = '125'
and   crm.END_DT IS NULL
| Id | Operation              | Name                     | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT       |                          | 1481K|   100M|       |   245K (5)| 00:49:09 |
|* 1 | HASH JOIN             |                          | 1481K|   100M|    46M|   245K (5)| 00:49:09 |
|* 2 |   HASH JOIN            |                          | 1480K|    29M|    38M| 13884   (9)| 00:02:47 |
|* 3 |    TABLE ACCESS FULL   | MCCI_PROFILE_SUBSCR_DTLS | 1480K|    21M|       | 3383 (13)| 00:00:41 |
|   4 |    INDEX FAST FULL SCAN| SYS_C002680              | 2513K|    14M|       | 6024   (5)| 00:01:13 |
|* 5 |   MAT_VIEW ACCESS FULL | MV_CRM_SUBS_DTLS_08AUG   | 1740K|    82M|       |   224K (5)| 00:44:49 |
Predicate Information (identified by operation id):
   1 - access("CRM"."SUBSCR_NO"="B"."SUBSCR_NO")
   2 - access("A"."PROFILE_ID"="B"."PROFILE_ID")
   3 - filter("B"."ACE_STATUS"='N')
   5 - filter("CRM"."END_DT" IS NULL AND "CRM"."SRVC_TYPE_ID"='125')Whereas for the modified MView query, the plane remains the same:
select /*+ ALL_ROWS */ crm.SUBSCR_NO, crm.ACCOUNT_NO, ltrim(crm.AREA_CODE,'0'), crm.DEL_NO, >crm.CIRCLE_ID
from    (select * from MV_CRM_SUBS_DTLS
         where SRVC_TYPE_ID = '125'
         and   END_DT IS NULL) crm,
        (select /*+ ALL_ROWS */ A.ALTERNATE_CONTACT, A.CREATED_DATE, A.EMAIL_ID, B.SUBSCR_NO
        from MCCIPRD.MCCI_PROFILE_DTLS a, MCCIPRD.MCCI_PROFILE_SUBSCR_DTLS b
        where A.PROFILE_ID = B.PROFILE_ID
        and   B.ACE_STATUS = 'N'
        ) aa
where crm.SUBSCR_NO = aa.SUBSCR_NO
| Id | Operation              | Name                     | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT       |                          | 1481K|   100M|       |   245K (5)| 00:49:09 |
|* 1 | HASH JOIN             |                          | 1481K|   100M|    46M|   245K (5)| 00:49:09 |
|* 2 |   HASH JOIN            |                          | 1480K|    29M|    38M| 13884   (9)| 00:02:47 |
|* 3 |    TABLE ACCESS FULL   | MCCI_PROFILE_SUBSCR_DTLS | 1480K|    21M|       | 3383 (13)| 00:00:41 |
|   4 |    INDEX FAST FULL SCAN| SYS_C002680              | 2513K|    14M|       | 6024   (5)| 00:01:13 |
|* 5 |   MAT_VIEW ACCESS FULL | MV_CRM_SUBS_DTLS_08AUG   | 1740K|    82M|       |   224K (5)| 00:44:49 |
Predicate Information (identified by operation id):
   1 - access("CRM"."SUBSCR_NO"="B"."SUBSCR_NO")
   2 - access("A"."PROFILE_ID"="B"."PROFILE_ID")
   3 - filter("B"."ACE_STATUS"='N')
   5 - filter("CRM"."END_DT" IS NULL AND "CRM"."SRVC_TYPE_ID"='125')Also took your advice and tried to merge all the queries into single INSERT SQL, will be posting the results shortly.
Edited by: BluShadow on 30-Aug-2011 10:21
added {noformat}{noformat} tags. Please read {message:id=9360002} to learn to do this yourself

What is the need for setting property data inside the JMSMesage

Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .

raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

How to transfer a set of data from Excel spread sheet to an Access database

hi,
Can any one please tell me how to transfer a set of data from Excel spread sheet to an Access database using SQL query.I'm using java API currently. I have done all sorts of ODBC connection in administrative tools.The file is in correct location. I have done certain coding but with errors.Help me to get rid of these errors,
Coding:*
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection datacon=DriverManager.getConnection("jdbc:odbc:exdata","",""); *//For Excel driver*
Connection datacon1=DriverManager.getConnection("jdbc:odbc:stock1","",""); *// For mdb driver*
Statement datast=datacon.createStatement();
Statement datast1=datacon1.createStatement();
ResultSet excelrs=datast.executeQuery("select item_code,sdata,closing_stock from phy "); *//phy is the excel file*
while(excelrs.next())
String ic=excelrs.getString("item_code");
System.out.println(ic);
String d=excelrs.getString("sdate");
double cs=excelrs.getDouble("closing_stock");
int dbrs=datast1.executeUpdate("insert into second values('"+ic+"','"+d+"',"+cs+")"); *//second is the mdb*
excelrs.close();
}catch(Exception e)
System.out.println(e);
Error:*
java.sql.SQLException: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'C:\JavaGreen\phy.xls'. Make sure the object exists and that you spell its name and the path name correctly.
thanks,
kumar.

JAVA_GREEN wrote:
No i haven't mixed up.But the file from where i have to retrieve the data is in csv format.Even though i created another csv driver.and tried but i cud not find a solution to load/transfer a set of records from one file(in Excel/csv format) to another file(in mdb format).plz help me.Is there any other methods for this data transfer.A csv file is NOT an excel file.
The fact that Excel can import a csv file doesn't make it an excel file.
If you have a csv file then you must use a csv driver or just use other code (not jdbc) to access it. There is, normally, a ODBC (nothing to do with java) text driver that can do that.

Adobe Acrobat XPro - Unable to set automatic date in form

Hello -
I created a layout in Indesign and brought it into Adobe Acrobat XPro to create a form.
I have not been able to get the form to automatically populate a date when it opens. In fact, I am unable to even type in the box now. I entered this code under validate in the text properties:
var f = this.getField("Today");
f.value = util.printd("m/d/yy", new Date());
I also entered this code in another area:
Under page properties, page thumbnails and page properties. Under actions - Select trigger - page open. I added a run a javascript action:
var f = this.getField("Today");
f.value = util.printd("m/d/yy", new Date());
Please help. Thanks so much!

You can use the following code to catch and display the error message:
try{
var f = this.getField("Today");
f.value = util.printd("m/d/yy", new Date());
} catch(e) {
var cMsg = "An error occurred setting the date\n";
for(var i in e) {
cMsg += "\n" + i + ": " + e[i];
app.alert(cMsg, 1, 0);
If the error message displays "f is null" then you have a missing field or are using the wrong field name.

Changing charts with different sets of data

Hi Guys,
I have created a dashboard (BO 4.1) with a Summary view. It contains 5 charts.
One of the column charts gives monthly project count. The data is coming from a Webi cross tab (Live Office) as shown below.
The highlighted yellow cells is the source data for the chart.
Product
Emp Type
Jan
Feb
Mar
A
X
1
2
3
A
Y
1
2
3
B
X
1
2
3
C
X
1
2
3
C
Y
1
2
3
Total:
5
10
15
Now, there is a check box that the user clicks that opens up a "List Builder" component where the user gets to select the "Product".
Based on the "Product" selection, I want the column chart to display the respective data from the table above.
Could anyone help me achieve this in the most efficient way?
Note -
Later, I also want to add a "Radio Button" for "Emp Type" and another "List Builder" for "Month". So, total 3 selectors. The other charts have their own sets of data.

Hey jeewan,
If i understood your question properly its all about the axis value of month & totals invariable product & employee. In this case remove the totals coming from the webi report. create a sum formula 30 rows below. But make sure how many records you will comsuming at the maximu level if you include all the values in the list builder and then decide where to right this sum formula. Now pick the month from the top and total from cells where you have written the sum formula.
Got it, does it helps!!!

How can I set my date and time to ebay network time server?

In the system preferences I would like to set the date and time to ebay UK time?
I thought a quick google would be bring up the server and I can't find it.
At the bottom of every ebay page there is a link to official ebay time
But its not a live feed of time to get it to the second.
I want it to be accurate so that I can use applescript to snipe bargins.
Many Thanks
Matt

Just trying to go along the free route. I found Garage Buy This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

From yesterday, I have been facing the problems in my iphone and my wife iphone. The same problem, "cannot connect to itunes store". I have strong internet connection. I tried all the possible way I could like setting, general, date and time.....etc.

I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?

No - I have not tried other routers on my network.
What I meant was I could use my itouch on other users wireless networks without any issues.
I'll update the routers DNS to try using Google's 8.8.8.8 instead of my ISP.
Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS?

Problem with JFMERGE using the last set of data on all form sets

b Here is the scenario...
I have a file of data in character delimited format. Each record needs to produce the same set of forms. I used the Visual Transformation Editor to define the field nominated data file, including the ^form statements. The transformation agent processes the file of multiple records just fine. I get a file from JFTRANS that contains the set of data & form statements repeated for each record in the file.
Great so far.
b Here is the problem...
Unfortunately, the print agent is repeating the same set of data on every copy of the set of forms that is printed. It uses the data from the last set of forms to be printed.
b Additional information...
For ease of building the field nominated file by our custom client program we have standardized on using GLOBAL fields. Therefore, our DAT files contain all the ^global declarations with all the necessary ^form statements at the end. I used the transformation editor to build the same type of file. Therefore the file going to the print agent looks like:
^global name1
data1
^global name2
data2
^form form1
^form form2
^global name1
newdata1
^global name2
newdata2
^form form1
^form form2
The printed result puts "newdata1" & "newdata2" on both sets of form2. Strangely, the correct data values are showing up on both sets of form1.
The only difference between the two forms is that form1 is not defined with the fields as global where form2 does define them as global. I removed the global flag from form2 but that didn't change anything.
I think I know what is occurring. JFMERGE is putting the data elements into the global dictionary and when the same name is in the file the latest data value ends up in the dictionary (thus all the forms print using the last data put into the dictionary). I certainly didn't expect this. I thought it would load the dictionary and print the first set of forms, then reload the dictionary and print the next set of forms. At least that is the way I see it occuring based on the order of things in the DAT file. Based on what is occuring it appears that JFMERGE reads the whole DAT file, building the dictionaries and then processes all the ^form statements.
b My request for help...
Does anyone know what I can do (such as insert some command) to get the correct data on the forms?
It looks like using a fixed record format might do the trick but that isn't an option at this time. As things are right now it looks like I'm going to have to take the data file apart, and make lots of files with one line of data per file.
I have a time deadline to get this printed so if there isn't a way to make JFMERGE operate as I expected it looks like I'll be doing this by hand. Fortunately, there are only 250-300 data lines. Future jobs could have thousands of data lines so if there isn't a way to do it with a multi-line data file I'll have someone create a program for splitting the original file up (and adding the ^job line).

We don't use subforms so some of what you suggest isn't effective for us. Our forms are a duplication of the paper forms and are not dynamic. We design each form separately and our custom filler software (that builds the DAT file) uses a database with the required forms for each print job defined within it. Since we don't have subforms, our simple method of printing is to declare as GLOBAL all the unique fields used on all the forms to be printed followed by the ^form commands. It was a simple & straightforward method for us to do better than 500 print jobs over that past couple of years. In addition, our custom filler software can easily build the DAT files. Because I need to manually declare all the ^form statements my experience with using ^field is that the form must be declared followed by the appropriate field commands (repeat for all the forms). i <many hours later I continue typing this post> Taking the original Transformation Definition File and customizing it for how things need to be when using ^field commands was a time consuming experience (and a learning one). It did the job as I needed but it is an experience I don't want to repeat. There has got to be a better way of building the TDF properly. I'm definately leaning towards a program to split the file into multiple files. Here is what I went through... I did all the editting using Notepad. I changed all ^global to ^field. Then I had to remove the #comment lines. Next was to find any references to fields that had to be global to the top and chang ^field to ^global. Then it was moving the fields around so they were underneath the appropriate ^form statement. Then, since one of the forms was multi-page I had to add the ^page command and sort the fields so they were under the correct page. That was followed by duplicating fields that are used on multiple forms or multiple pages. Then I discovered that the print agent won't do ^page unless "inline processing" is turned off (I did not want to specify the page name as it could change over time) - so I added "^inline off" in front of every ^page. Finally it was removing unecessary field references so the log file would be clean. For those that are interested, the following is an example of my final file. ^global nameA data ^global nameB data ^form nameX ^field name1 data ^field name2 data ^form nameY ^field name1 data ^field name3 data ^inline off ^page ^field name4 data ^field name1 ^inline off ^page ^field name5 data ^field name6 data

How do I programatically set the date and time of my FP-2000 in LabVIEW RT?

I checked out the following knowledgebase document which has a tool for setting the system time, but I also need to set the date:
http://zone.ni.com/devzone/explprog.nsf/ 6c163603265406328625682a006ed37d/ 37175dbc3696a1ac86256a850051097d?OpenDoc ument
How can I do this?
-Jim

That is great, Steven. I also found a solution using GetSystemTime and SetSystemTime which are functions in kernel32.dll that get and set the system date-time. This function call worked on the FP-2000 that I have and should work on RT-Embeded systes, as well.
-Jim
Attachments:
GetSystemTime.vi ‏16 KB
SetSystemTime.vi ‏14 KB

Getting mx:DateField to be set a date on load.

Similar Messages

Maybe you are looking for