Getting No Reply from SNMP Request to Windows 2012 Server

SNMP Community string has been properly configured using Properties against SNMP Service in the list of services under Computer Management/Services and Applications/Services. SNMP Service was properly installed using Add Roles and Features. The
server and the client were both rebooted (restarted). As near as I can tell (Norton is in control of the firewall on the client) the firewall on both computers has been disabled. The program that I am using has worked in the past against Windows
2008 with SNMP Service configured and against motion picture theater projectors. What else can I try?
MARK D ROCKMAN

Hi,
Type netstat –an at a command prompt, and then press
ENTER. To confirm that the SNMP service uses the correct User Datagram Protocol (UDP) ports:
UDP port 161 for general SNMP messages.
UDP port 162 for SNMP trap messages.
If these ports are being used by another service, you can change the settings by modifying the local services file on the agent. The services file is located in the
%systemroot%\System32\Drivers\Etc folder.
If you find another service or program that binds to UDP port 161, stop the automatic startup of that service or program.
It is just a suggestion that SNMP is deprecated for Windows Server 2012. Instead, use the Common Information Model (CIM), which is supported by the WS-Management web services protocol and implemented as Windows Remote Management.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

TS4079 Both my wife and I have iPhone 5 and we use Siri a lot. Ever since we upgraded to IOS 7 we found that frequently we get a reply from Siri something like "This is embarrassing but I cannot handle a request right now". Prior to IOS 7 this did not hap

Both my wife and I have iPhone 5 and we use Siri a lot. Ever since we upgraded to IOS 7 we found that frequently we get a reply from Siri something like "This is embarrassing but I cannot handle a request right now". Prior to IOS 7 this did not happen.

tonefox is probably right. Server overload. I also notice that when siri does respond correctly, it is slower. My wife has a 4s and same story, and she has not upgraded to IOS 7.
So it's not just you (if that makes you feel any better).

When I plug in my ipod Nano i syncs to itunes but I can't get the music from my Library in Windows Media Player???

How can I get my music from my Library in Windows Media Player to sync to my iPod Nana?

You can't sync an iPod using Windows Media Player. You need to add the songs to your iTunes library first, and then sync those songs to the iPod.
This document provides more information (Add to Library section)
http://support.apple.com/kb/HT1347
NOTE: The WMA files (the file type used by Window Media Player) need to be unprotected (no DRM). They are converted to a format supported by iTunes while adding to the iTunes library. This WMA conversion feature only works in the Windows version of iTunes (Mac users cannot do it).
I believe you can drag and drop the WMA files, or the folder containing the WMA files, onto the iTunes window. The original WMA files are not changed. iTunes creates its own converted files at the location it stores all the iTunes media files.

And when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

and when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

HT5902 i lost my ipad can i get my photos from it onto my windows phone

I lost my iPad.can I get my photos from it on my windows phone

yea icloud but it acts crazy on my windows phone. And doesn't have option for photos

Have you moved from Unix/Oracle to Windows/SQL Server

I am looking for people that have moved from Unix/Oracle to Windows/SQL Server...
Would you do it again ?
Did you save money ?
Were you using Zones to virutalize on Unix ?
Did you gain or loose overall Performance ?
Have you had to perform a recovery on SQL Server ?
Have you done a recovery in Oracle ?
Were you using Rman ?
Which worked better ?
We are going through an analysis of does it really make sense, save money and effect performance to move from a strong unix/oracle environment to a MS/SQL environment.
THanks Rob
[email protected]

Hi,
All our R/3 legacy systems are Windows/Oracle.
All the new systems (BW, SRM, CRM, XI) are Windows/MSSQL.
It was an order from the management to make the switch because of the high prices of Oracle licences.
The official motto is now Oracle on Unix only and SQL server on Windows only.
We get the same level of performance as with Oracle, but we, old SAP Oracle grumpy admins, are much more comfortable with Oracle admin than SQL server admin.
imho, SQL server may seem simplier but it is much easier to look under the hood whith Oracle.
We have to reinvent the wheel and it's kind of frustrating but we will cope with it...
I would say that SQL server is not a good choice for BW usage because there is a lot more litterature on BW database optimisation for Oracle than MSSQL.
The official SAP class does not speak at all about SQL server but has several chapters on Oracle...
Regards,
Olivier

Migration from Small business server 2011 standad to Windows 2012 Server Standard

Hi everyone,
I have a network with SBS 2011 standard (that is the only server) and now we are moving (migrating) to windows 2012 server standard with an exchange 2013 (not yet installed).
The main thing is that when trying to install the migration tool on the SBS server, it will not install because it is not a 2008 R2 server.
is there a workaround for this problem?
I Hope this will help. Amir Ovadia

Hi,
Would you please first let me know how did you perform the migration? Regarding the migration tool, is it the Windows Server Migration Tools in Windows Server 2012 R2? Since you need to install
the Windows Server Migration Tools on the source SBS 2011 server, I suggest we could perform the following steps to install it.
Create deployment folders for ource computers by running the
smigdeploy.exe tool (included with Windows Server Migration Tools) on your destination server.
Register Windows Server Migration Tools on source computers that are running Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, or Windows
Server 2003 by using SmigDeploy.exe.
For details, please refer to the following article.
Install, Use, and Remove Windows Server Migration Tools
http://technet.microsoft.com/library/jj134202
In addition, here are some similar threads about how to perform the migration from SBS to Windows Server 2012 Standard, maybe they are useful to us.
how to Migrate sbs 2011 to Standard 2012 server
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server
Migrate SBS 2011 to Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard
Migrating from Windows SBS 2011 Essentials to Windows Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/41d17523-c6ae-4ba6-851f-a42b16f31d2a/migrating-from-windows-sbs-2011-essentials-to-windows-server-2012-standard
As there is no specific documentation on migrating from SBS to Windows server 2012, if you want the step by step procedure about the migration, we’d better involve
SBSMigration.com for detailed information.
Thanks.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Windows 2012 server image creation

Hi
I am posting this here as you have worked on imaging OS.
here is the situation:
I am working on creating windows image file (WIM file) for our company and i have already created images for windows 7 and also 3 different type of windows server 2008 without any issue. everything worked as it is supposed to. now i am trying to create an
image from Windows 2012 server. so all my process is same as i did for server 2008 but i get this error:
[error] c:\recovery\WindowsRE\winre.wim <error = 2>
error imaging drive [c:\]
they system ca not find the file specified.
some point to mention:
1- c:\recovery\windowsRE\winre.wim actually exists
2- as i mentioned i ahve done imaging many many times in the same environment and everything works just i get this error when i want to image my windows 2012
3- I boot in PXE environment and then try to run IMAGEX command and create my WIM file.
4- I have about 80 G free disk space on the partition I want to create my image to.
your help is appreciated.

Thanks for your reply.
as i mentioned before imagex works perfectly for all my images ( win7 and also win 2008) it just fails on win2012
about DISM: I have worked with DISM to inject updates into images offline but i didnt know we can create an image of forexample C drive with DISM. is it possible?
I would actually use a "capture image" from a WDS-server, which is actually the easiest way (in my opinion) to create a Wim-file. What you have to do is set up a WDS server, add the boot.wim from e.g. Windows 2012 DVD into boot images, and then right click
it and "create capture image". Once you boot into that, it will help you create a .Wim-file that can be saved to the same disk, external disk (or even to the WDS if wanted).
I used to use imagex for older OS:es, but it doesn't work with Win8/Server2012 in the same way.

Synchronization fails on Windows 2012 Server

Hello, Running DPM 2012 R2, Protected computer Windows 2012 Standard
I'm backing up only folders (19 GB) on a Windows 2012 server which also have SCCM 2012 installed on it. The initial replica and recovery point creations are successful. Any
scheduled synchronization job scheduled after will fail. The job display "In progress" but there is 0 MB data transferred and will remain in that stage for days until I cancel the job. A reboot of the protected server
resolves the issue temporarily where I might get a couple days of successful synchronization\recovery points but then the job will freeze again. I have looked in the event logs and the logs in Monitoring on the DPM server and also on the protected computer
but have not found any error that points to the cause. Has anyone seen this issue? Will be grateful if someone can point me in the right direction of troubleshooting this issue. Thank you.

Not seeing any errors that stands out. Here is the log from today's synchronization job that is hung.
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(2078) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::DoFailureCleanup [00000000028FD320]
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
2B98 2A40 06/18 15:05:54.409 31 vsssnapshotrequestor.cpp(119) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::~CVssSnapshotRequestor [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(2044) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::CleanUp [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
I ran the VSSADMIN LIST WRITERS command after I cancelled the job and this is the returned message.
"Waiting for response.
These may be delayed if a shadow copy is prepared."

Windows 7 SP1 client file lock on network share hosted ny WIndows 2012 Server

Hello
I have one strange problem after migration from Windows 2003 Server to Windows 2012 Server R2 Standard.
All migration tasks went well but two things do not work.
In Computer Management you have The Opened Files feature and if you open any file that is located on the network share hosted by Windows 2012 R2 form Windows 7 SP1 and then close it
it remains open in the Opened Files tab (even if you wait an hour). There is no problem with Windows XP SP3. The issue exist only with Windows 7.
The session view of sessions to the file server do not work. If I try to open it I get the message that the application is not responding.
Can someone help me with that ?
About the environment:
It is one server Domain migrated form 2003 to 2012R2.
The domain and forest level was raised to 2012 R2.
I have made clean install of Windows 2012 R2 and then migrated AD.
Best Regards
Sebastian Sala

Hi Sebastian,
>>There is no problem with Windows XP SP3. The issue exist only with Windows 7.
T>>he session view of sessions to the file server do not work. If I try to open it I get the message that the application is not responding.
Based on the description, please check event logs in Event Viewer to see if there were some related events logged. Besides, does this phenomenon happen all Windows 7 clients? We can try to restart the client to see if it helps.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 7 Client 'sees' an old version of windows 2012 server share

Hi All,
I have a problem which seems to be a common theme looking at other threads. Here's the overview of the problem:-
I have multiple windows 7 clients and a windows 8.1 client within a 2008 Server in a domain.
I also have a Windows 2012R2 Server which is not joined to the domain. There is a Share on the 2012R2 which has the Caching Option turned off. Everyone full control on Share & File permissions.
One of the Windows 7 machines in Explorer when it looks at
\\2012server\share sees an old version of the folder. It seems that SMB 2 chaching is working too well. Not even pressing F5 or clicking View, Refresh updates windows explorer.
It took a reboot to get the workstation to see the up to date contents of the share on the 2012 server.
We don't seem to have that behaviour with that client against the 2008 server.
I have seen this behaviour on another machine un-related to us at another location which was in a workgroup with a 2012 server and no domain.
Questions:-
Is there some sort of problem with Windows 7 workstations working against 2012 Servers in a non-domain setting or is it just Windows 7 against 2012 servers period?
I understand that Windows 7 utilises SMB1 & SMB2. SMB2 introduced caching. If the server has turned off the share cache option should the client cache the contents of the share or the information about the files & folders & 'file not found'
information?
I want to open a file handle to a file on a network share so I can read and write data to it. But I also want to know that when I look at the folder to open the file I'm actually looking at the live version of the folder and files in the folder and
not a cached version of the folder. If it's a cached version the file might be there already but I won't see it.
Is there an API call that tells the client to get a fresh view of the server share so I can be absolutely sure that when I look for a file on the server I'm getting the correct answer and not one from cache.
I first posted the question with the same subject "Windows 7 Client 'sees' an old version of windows 2012 server share" in the Windows 7 Networking Fourm
https://social.technet.microsoft.com/Forums/en-US/23bf3627-987b-4c27-8062-85a284a2cda4/windows-7-client-sees-an-old-version-of-windows-2012-server-share?forum=w7itpronetworking and it was suggested I repost in here. Please do take the time to read
the thread which will save time with suggestions that have already been covered.
As the computers that can be affected by this problem are not mine I cannot enforce or guarantee that any of my 'client base' will apply any hotfixes. I will also not have the ability to tweak registry settings as I can't guarantee Admin Access.
It seems that we need to go back to SMB1 as all the tweaks to SMB since those days have introduced problems with the basic requirement of sharing files from a share on a server for Read/Write purposes. I have tried turning a network back to SMB1 and that
has resolved a lot of the issues but then I found a post/MS blog that states not to leave the network on SMB1
The Caching option of the share had already been turned off. Surely Windows clients should not cache any information about the share but I think that is not the case.
Thanks is advance
Robert

Hi Shaon,
Thanks for looking into this.
If this is a known issue, why isn't the hotfix rolled into a general windows update if this is a known problem? However this doesn't just affect domain joined workstations.
Surely it's basic functionality for a networked computer to access files and folders on a network file server. It's what networks were invented for at the end of the day.
I am unable to apply hotfixes to these computers that are having the problem due to the fact they are not mine but my customers.
At one of my customers sites I disabled SMB2 from the server and network clients as well as disabling the network adapter power saving option. This seemed to resolve the issues that I saw on one client that seemed to be 30 minutes behind the rest of
the network. The hotfix you link to states that it is for Domain joined computers. At my customer site the PC's are not in a domain at all, just a workgroup with workstations and a 2012r2 server. Will the hotfix be applicable to non-domain machines?
Also many clients seemed to loose the file handle to an open file on the server. I'll get them to turn SMB2 back on at some point after I send out some updates but all the problems I see seem to be caused by the caching functions in SMB2. SMB1 is good and
stable. It's SMB2 that seems to be causing the problems as it was designed from the ground up for caching.
Has this networking issue been resolved in Windows 8, 8.1 and 10?
As I am unable to apply a hotfix to 1000's of PC's that are not mine, is there an API call or something where I can get the windows client to stop lying and get me the current state of a folder on the server?
Will Turning off ClientSideCaching fix the issue? HKLM\SYSTEM\CurrentControlSet\Services\MrxSmb\Parameters\
CSCEnabled
Or will every machine need to be tuned individually according to the following guide:-
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN ?
Robert

Install Remote Desktop Services Failed on Windows 2012 Server

I understand RDS is not recommended on DC due to security consideration. However since I want to play it at home, it is not much a concern. Such scenario works fine on Windows 2008 R2. But on Windows 2012, the RDS (session-based, have not
tried VDI, but expect same result) installation always fails and is incomplete on DC.
In \Administrative Tools\Terminal Services, I only have RD Licensing Diagnoser and RD licensing manager. The remote desktop service management service cannot be started (Error code: 0x88250001). Is there any extra configuration needed for RDS
working on Server 2012 DC or before the installation? Thanks.
Update: this issue has been solved in Windows 2012 R2 Server. According to
http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
"Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller. In addition, we published
guidelines for how RD Session Host could be used without the RD Connection Broker."
The guidelines (http://support.microsoft.com/kb/2833839/en-us) primarily apply to Windows 2012 Server.

Asinine. Simply Asinine. Microsoft took it out because of $GREED$.
RemoteDesktop has become so popular, they had to break it to make more money. Thats why they discontinued SmallBusinessServer.   If this practice is so tabooo... Why did MS go the opposite direction with SBS 2011 Premium Cal's? SBS2011
had DC, Exchange, RDS and Sharepoint,SQL, RemoteWebWorkplace, OWA all working in perfect harmony. It is an untrue statement then, that it was "allowed but not recommended"
Now you by Server2012 (core + two virtual) and its not enough for all this.
You need at least another $700 for another sever licence to have it all
and who knows if SQL will run on a DC, or Exchange, or R-DERP server. Another reacherous bridge to cross.
By far, the absloute worse release since Millennium. The product is not ready for production, we broke our rule of waiting until the first SP1 upgrade for this and Exchange 2013. Problems with USB drivers and networking running extreamly slow.
Our 2003 SBS server was at least three times as fast, and this server has SAS and SSD drives running. It can't get out of its own way, and IE10 is the most unstable piece of crap to come out of Redmond. Open wide and swallow - Mother Microsoft
knows whats best for you. YOU WILL EAT OUR SLOP AND LEARN TO LIKE IT.   Server2012 AKA "METRO-SERVER"
Now here I sit after 50 Hours back to back setting up a new R-DERP server 2012, AD, Have my RDP licences in my hand at $100 each, and WTH does Microsoft care if I install it on my DC. ITS MY DC. And the cost savings versus the "risk" was
previously MY decision.
Sure, I can install a couple of Virtual HyperV sessions but they are so tempremental to a power-outage in a small business its not worth it. I have to double up my server hard drive resources, buy a $800 battery backup unit and make sure to attach
the cable, and even then, if that Bi**H does not shut down properly, one bit goes awry in a VHD or VHDX file and you are screwed. Restore from lastnights backup and forget about todays work. Not to mention it will probably take a half day to try
to fix it, then recover it then tell the 30 users they lost a days worth of work.
HYPER-V is for test servers and has no place in a small (micro) business environment. 5-30 users.
Microsoft's solution, buy another server. Need Exchange? Buy another server or take the risky cheapskate route and spin up some VHD's. Might as well put a gun to your head and play russian roulette, at least you know you have a one in six
chance of failure. With MS, its a 100% failure for a dirty shutdown power loss, motherboard blows, memory goes corrupt in a few years, your conventional method of recovery is gone, and you have some upchucked VHD file to try to recover some of TODAYS
data from.
Screw server 2012 forever.
I will sell 2008 and SBS2011 Premium unitl it rots in hell like XP (of which there is NOTHING wrong with for the average, WORD, EXCEL, OUTLOOK and QUICKBOOKS that all SMB's use. Its MS $GREED$ Grab the world by the B**ls and squeeze with all
your might to squeeze every dime you can out of *SMB* because big business is going to run thier 2003 Exchange and 2008 servers into ground before they switch to this garbage.
YOU CANNOT INSTALL EXCHANGE 2013 on DC , OR on R-DERP server.
Go buy another server license and server or MOVE TO THE CLOUD and get fleeced every month.
I have 30 DC/R-DERP/Exchange and SBS2011 Premium servers all running for years in perfect harmony, locked down with security so the users can't even WIGGLE with something they are not supposed to work with. They get their apps, cannot install anything
and all these servers are running just fine behind the firewall and perfectly save. The track record of this combination is 100% stable and is up 24/7/365 with no problems. Do yourself a favor and throw this 2012 into the river, you don't need
any weights because it is LEAD and will sink to the bottom by itself.
Why, you ask? Official is "Its for your protection" The real reason? To sell you more $700 server licences.
Maybe for SMB, we start selling Linux NAS Servers, host the Exchange in the cloud and be hearded like cattle to the Microsoft slaughterhouse. One way or another, you are going to bleed.    A little each month to move to the cloud, or
a small fortune if you want to have it in house. Microsoft wants it to be more expensive to have in house. No more buying a server and running it for six years before you upgrade. They can't have in house servers competing with their cloud,
and small businesses are the low hanging fruit ripe for the pickin'.

Microsoft security compliance manager 3.0 in windows 2012 server

Hi All,
I am completely new in SCM. I have assigned to verify and check why SCM is required for environment, what and how SCM works. I have downloaded SCM from
https://www.microsoft.com/en-us/download/details.aspx?id=16776.
After download i am able to install it in 2008 std x64 bit but my target is to install it in 2012 server x64 bit. I am not able to install it.
It's showing do not have feature of .Net Framework 3.5 and installation is getting closed suddenly. I tried to download .Net Framework3.5 but not able to install it as showing not supported or showing alternet path. I am not holding any CD/DVD of Windows
2012 server. Only ISO.
Please help me.
Thanking you in advance!
Abhijit

Hi,
Thanks for your post.
SCM Baselines for Windows 8.1, IE 11 and Server 2012 R2 are now live!
http://blogs.technet.com/b/secguide/archive/2014/09/04/scm-baselines-for-windows-8-1-ie-11-and-server-2012-r2-are-now-live.aspx
For more SCM related issue, i think you may ask in:
https://social.technet.microsoft.com/Forums/en-US/home?forum=compliancemanagement
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Assessment and Deployment Kit (ADK) for Windows 2012 Server

Hi
I need to download Windows ADK for Windows 2012 Server. The link mentioned on microsoft website "http://www.microsoft.com/en-in/download/details.aspx?id=30718" is not reachable. Can anyone please tell me, from where I can download Windows ADK for
2012 Server.
Thanks
Manik Bansal

Hi Johan, Hi Manik,
Your reply with the link for the Windows Assessment and Deployment Kit (ADK) for Windows® 8 at http://www.microsoft.com/en-us/download/details.aspx?id=30652 has been very much appreciated.
I have also found a new and updated link to the *NEW* Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 at http://www.microsoft.com/en-us/download/details.aspx?id=39982 that was released and published on 2013-Oct-17.
Please note that this ADK can be used with Windows Server 2012, but there are some important differences between the Windows 8 ADK and the Windows Server 2012 ADK. The TechNet summary of the ADK may be explored at the link http://technet.microsoft.com/en-us/library/jj200116.aspx
The details of the ADK for Windows 8 may be explored at the link http://go.microsoft.com/fwlink/?LinkId=248647
Thank you,
Michael C.

Forced reboot of a Windows 2012 server

Hi,
First of, which M*r*n though it was a good idea to treat a Windows 2012 server as if it was an old Windows XP SP1 machine and let Microsoft decide what would be a good moment to reboot a server and make sure the user logged on would be clueless what to do
to prevent the reboot untill it was too late.
PLEASE Microsoft, I dot not care that you made a mistake when designing this new feature but PLEASE change the default. For those of us that want to change it it then seems to become a hunt for the right GPO setting because there is a multitude of similar
settings to choose from. Some were designed to work with Windows XP, some were designed to ... what ever. Once I knew this problem existed it still is an almost impossible tast to simple get it the way I want it. :-(
Yesterday I almost completely lost a server as the server controling it it insisted rebooting in the middle of an upgrade. :-(
Can we have al least the option to postpone the reboot please?
Also why can I no longer tell the server to install the updates as I was able to do on a Win2008R2 where I was able to simply tell it to install the updates monday morning early when all backups for the weekend have finished and then reboot before any user
is logged on.
So.... will anyone from MS read this and maybe do something with this info?
After asking arround it seems this is such a big issue some customers are even refusing to install Windows 2012 or 2012 R2 on new servers and stick with Win 2008 R2. I think I am going to do the same if MS does not fix this issue soon.

So.... will anyone from MS read this and maybe do something with this info?
No. Probably not.

Getting No Reply from SNMP Request to Windows 2012 Server

Similar Messages

Maybe you are looking for