Getting problem with running RWBLD60 with User parameters

Hi All,
I am trying to run a report using rwbld60 from command prompt which has input parameters
I tried like this but it didnt work out
rwbld60 module=reportname.rdf userid=scott/tiger@orcl destype=file desformat=pdf
desname=report_out.pdf parameterform=NO params=parms_1 traceopts=trace_prf tracemode=trace_replace
tracefile=trace.txt
Can any one please tell me how i can pass user parameters for rwbld60
Thanks,
Amar

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

Similar Messages

Problem with users disabling ARD client service

I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
BTW, this would have to be done on multiple machines running both panther and tiger.
Any help would be appreciated as I'm not quite sure where to start.

First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis.

I am getting problem with eps image coordite while rotating in AI Script

I am getting problem with eps image coordite while rotating in AI Script

"Problem"? Uh, *what* problem?
"AI Script"? There is no such thing.
I'm willing to interpret "cordite" as "coordinate" but you must provide more (a LOT more) information before anyone can volunteer to help you. You are not posting to an automated system that retrieves stock answers from a database. You are asking Real People to help you. (And this is a user-to-user forum, so it's all voluntary as well.)

Getting problem with handset

hello i have nokia e71 now i getting problem with it. my mobile phone switches doesn't work.when i try to receive any call but mobile screen it's automatically disappered. evenif i press any key to open my contect menu but i coun't open it as well. so can u reply what i should do.

Does ur phone contain a large no of msg? If yes pls bring them down to 500 or less. Remove sim & memory card & connect ur phone to charger when u try this.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Getting problem with DOMImplementation classes method getFeature() method

hi
getting problem with DOMImplementation classes method getFeature() method
Error is cannot find symbol getFeature()
code snippet is like...
private void saveXml(Document document, String path) throws IOException {
DOMImplementation implementation = document.getImplementation();
DOMImplementationLS implementationLS = (DOMImplementationLS) (implementation.getFeature("LS", "3.0"));
LSSerializer serializer = implementationLS.createLSSerializer();
LSOutput output = implementationLS.createLSOutput();
FileOutputStream stream = new FileOutputStream(path);
output.setByteStream(stream);
serializer.write(document, output);
stream.close();
problem with getFeature() method

You are probably using an implementation of DOM which does not implement DOM level-3.

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem with user-defined functions in XQuery String

hello
i've a problem with user-defined functions in XQuery String
details are here (the code is not Human-readable via forum's embedded editor ?? strange)
http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
thanks !!

See
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    return {$inputtype}
                 local:test_function("1","2")' returning content) o from dual
Error at line 5
ORA-19114: error during parsing the XQuery expression:
LPX-00801: XQuery syntax error at '{'
3                       return {$inputtype}
-                              ^
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    $inputtype
                 local:test_function("1","2")' returning content) o from dual
O
2
1 row selected.

Problem with user mapping

Hello,
We got a problem with user-mapping to a SAP system.
We create a SAp system, and an alias to this system.
We add a user mapping for the administrator (user, not group). Check for connector is OK.
Now, we make the same user-mapping for a group.
if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
</b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
So, it seem that the alias is only visible for an admin.
does any one got an idea ? we are on SP14, Linux.
regards
Guillaume PATRY

HI Guillaume,
The user mapping is available for both Admin as well as end users.
Open your system from System Administration>System Configuration>System Landscape.
In the property editor,in dropdown for property category,
select the logon method as UID?password and User Mapping type to admin/user.
Then you can create a Group,map the system alias for this group and add users to this group.
Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
Hope,this resolves your problem.
Regards,
Siddhartha

If I delete itunes completely from my computer and reinstall will I get problems with my account

If I delete itunes completely from my computer and reinstall will I get problems with my account. I am trying to upgrade from Vista to Windows 7 and need to clear hard drive as I have problems. Will it give me problems with my account if I install Itunes from new with new Windows 7 operating system?
Many thanks

Deauthorize the computer and back up the iTunes library before proceeding.
(64245)

I am a foreigner. So please forgive my bad english. When I purchase music in I tunes store and burn it on cd, can i give it away to others or to I get accusable? Is it possible, to give the musi i purchased to others or to I get problems with copyrights?

I am a foreigner. So please forgive my bad english. When I purchase music in I tunes store and burn it on cd, can i give it away to others or to I get accusable? Is it possible, to give the musi i purchased to others or to I get problems with copyrights?

It is illegal, against the law, to do this.
You ONLY buy the right to your own personal use of the music.
You do not have any right to distribute it to others.

Problem with user number

Goodmorning, I have a problem with user number of my smartphone Blackberry Curve 8900: when I call a numer of my adress book, on the right, appears a user number, that I don't know. Why dont'appears mine? I don't have buy this smartphone personally, but I had it (used) through the smartphone's owner...I think that the user number that appears on my display is his. How I can do to remove it?
Waiting for an answer, thank you.

Hello scricciolina90
Welcome To Support Forums
On or Curve 8900 from the Home screen > click Options > Click Advanced Settings > SIM Card > Highlight the phone number > Press the Menu key and click Edit SIM Phone Number > Check that field or Enter you Mobile number in that field .
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Problem with user services (creating a service for mpdas)

Hi, I'm using mpd and using a user service to start it.
However, I'm trying to create a service for mpdas (a mpd client for last.fm) and getting some errors:
currently, my mpdas.service is as following:
[Unit]
Description=AudoScrobbler client for MPD
After=mpd.service
[Service]
ExecStart=/usr/bin/mpdas
[Install]
WantedBy=default.target
Which giving me the following errors:
(14:49:55) [ERROR] You are not root. Not changing user ..
(14:49:55) [INFO] Connected to MPD.
(14:49:56) [INFO] Last.fm handshake successful. SessionID: ...
terminate called after throwing an instance of 'std::ios_base::failure'
what(): basic_filebuf::underflow error reading the file
Aborted
Which are the same errors I get if I run just "mpdas" instead of running it with sudo.
If I use it as a root service (instead of a user service) it fails on startup, but works fine when I restart the server.
So, I'm assuming:
1) mpdas needs root permission
2) if used as a root service, it fails at startup cause the mpd service (enabled as a user service) hasn't started yet
3) if used as a user service, it fails cause it needs root permission
What's the 'correct' way to solve this? (I believe mpdas should be a user service, cause it runs with a config that is just for my user).
Is there a way to make a user service run with root privileges?
I couldn't figure out the best way to configure it.
Last edited by alv-r- (2014-11-29 18:37:56)

TheSaint wrote:Why should it fails with sudo?
It works only with sudo. It was failing as a system service because it needs mpd, which I configured as an user service. Then when systemd starts the system services (when booting) there's not mpd instance running and it fails.
TheSaint wrote:Doesn't it works with fakeroot ?
As a noob, I don't know exactly how fakeroot works, I'll take a better look at it, but running it with fakeroot takes rid of the errors I was getting when not running as sudo.
The problem I have now is that it still fails on startup, but there isn't any helpful (or unhelpful) message. It just shows the PID and says it failed.
If I run
systemctl --user start mpdas
it works well though. Any ideas of why this happens?
My current unit file looks like this:
[Unit]
Description=AudoScrobbler client for MPD
After=mpd.service
Requires=mpd.service
[Service]
ExecStart=/usr/bin/fakeroot /usr/bin/mpdas
[Install]
WantedBy=default.target
Raynman wrote:Why does it need root privileges? Maybe you just need to configure it properly to run under your normal user?
Seeing the options in the man page and the config options for the config file, I don't see any that could do the trick.
I'll send a message to the developer with the error I'm getting (when not running as sudo).
Last edited by alv-r- (2014-11-29 18:36:59)

Problems with User profile Application not available

Hi
Have a 2 tier SP 2010, with SQL server and a single SharePoint2010 server. We have a problem with the User profile Application service.
The main problem is that we cannot go to "Edit" under Manage User Profiles. If we want to edit a user, we just get an error:
"Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: No User Profile Application available to service the request. Contact your farm administrator."
When rebooting the server, we get the following in event viewer: Warning: ASP.NET 2.0.50727.0
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 2/5/2015 12:25:25 PM
Event time (UTC): 2/5/2015 11:25:25 AM
Event ID: 84d104331476453b88c60a37d7a0b8fe
Event sequence: 9
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1212406818/ROOT-1-130676090755160256
Trust level: WSS_Minimal
Application Virtual Path: /
Application Path: C:\inetpub\wwwroot\wss\VirtualDirectories\14877\
Machine name: SPMACHINE
Process information:
Process ID: 4668
Process name: w3wp.exe
Account name: domain\spfarm
Exception information:
Exception type: UserProfileApplicationNotAvailableException
Exception message: No User Profile Application available to service the request. Contact your farm administrator.
Request information:
Request URL: http://sp2010:2010/_layouts/ProfMngr.aspx?ID=51982fe8-4886-4ebd-ad68-f5934656e54d&IsDlg=1
Request path: /_layouts/ProfMngr.aspx
User host address: ::1
User: domain\spfarm
Is authenticated: True
Authentication Type: NTLM
Thread account name: domain\spfarm
Thread information:
Thread ID: 15
Thread account name: domain\spfarm
Is impersonating: False
Stack trace: at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers._FillSubtypeCollection()
at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers..ctor()
at ASP._layouts_profmngr_aspx.__BuildControlProfileQuery()
at ASP._layouts_profmngr_aspx.__BuildControl__control6(Control __ctrl)
at ASP._admin_admin_master.__BuildControlPlaceHolderMain()
at ASP._admin_admin_master.__BuildControl__control21()
at ASP._admin_admin_master.__BuildControl__control2()
at ASP._admin_admin_master.__BuildControlTree(_admin_admin_master __ctrl)
at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
at System.Web.UI.Page.get_Master()
at System.Web.UI.Page.ApplyMasterPage()
at System.Web.UI.Page.PerformPreInit()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi Thomas,
Based on the error message, I recommend to verify the things below:
Please make sure that User Profile Service is started in Central Administration.
Please make sure Forefront Identity Manager Service and Forefront Identity Manager Synchronization Service are started in services.msc.
Change the schedule for the "Timer Service Recycle" job to run during off peak hours, when a small amount of timer jobs are running.
Check ULS log for more detailed error message. For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Field Guide 8 - Configuring the Database but problems with user id

Iam just running into problem after problem with Chapter 8 dataproviders when I'am about 2/3 of the way through.
I'am now trying to configure the "Login Data Structure" Page 363. After adding the derbyclient.jar file. Then opening DerbyLogin.java and thereafter clicking "Run" as instructed in the book I get this error.
Error on url jdbc:derby://localhost:21527/sample
ERROR: SQLException: Connection authorization failure occurred. Reason: userid invalid.
org.apache.derby.client.am.SqlException: Connection authorization failure occurred. Reason: userid invalid.
at org.apache.derby.client.net.NetConnection.mapSecchkcd(Unknown Source)
at org.apache.derby.client.net.NetConnection.securityCheckComplete(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.parseSECCHKRM(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.parseSECCHKreply(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.readSecurityCheck(Unknown Source)
at org.apache.derby.client.net.NetConnection.readSecurityCheckAndAccessRdb(Unknown Source)
at org.apache.derby.client.net.NetConnection.flowSecurityCheckAndAccessRdb(Unknown Source)
at org.apache.derby.client.net.NetConnection.flowUSRIDONLconnect(Unknown Source)
at org.apache.derby.client.net.NetConnection.flowConnect(Unknown Source)
at org.apache.derby.client.net.NetConnection.<init>(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at asg.databuild.DerbyLoginDB.createLoginDatabase(DerbyLoginDB.java:52)
at asg.databuild.DerbyLoginDB.<init>(DerbyLoginDB.java:38)
at asg.databuild.DerbyLoginDB.main(DerbyLoginDB.java:25)
BUILD SUCCESSFUL (total time: 5 seconds)
It's telling me that user ID is invalid. I have no idea what my db user id is or how I can check it with the bundled database as there is no documentation I have found about that. Nor do I even know what I have to do to properly configure this app to properly work with the bundled database as the field guide says absolutely nothing about this!Message was edited by:
tutorials

Found a solution to this problem for anyone else having the same problem please go to thread: http://forum.sun.com/jive/thread.jspa?forumID=123&threadID=99634

Problem with User Defined Second Selection Screen

Hi Gurus,
                   I have a problem with the selection screen selections. My requirement is that , User when he selects a check box on the main selection screen ( which is 1000) then at the at-selection event, another screen (whose number is 2000) will be called and it has some parameters to enter values. My problem is that how to get the values from this second screen and use them in the in my program. There is an execute button on the second selection screen and when i click that, nothing is happening.
                   Can anybody suggest me how to get the values from this screen which we called, and entered values in that screen. How to use these values and is there any way that we can do this.
Thanks in advance for helping me out.
Regards,
Srinivas.

Use <b>DYNP_VALUES_READ</b> FM to read the values from your dynpro screen...
Like this...
DATA: ls_dyname     TYPE d020s-prog,
        ls_dynumb     TYPE d020s-dnum.
gt_dynpfields TYPE STANDARD TABLE OF dynpread WITH HEADER LINE.
    ls_dynumb = '0112'.
    gt_dynpfields-fieldname = 'RF05A-NEWKO'.
    APPEND gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = ls_dyname
      dynumb               = ls_dynumb
    TABLES
      dynpfields           = gt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
Greetings,
Blag.

Getting problem with running RWBLD60 with User parameters

Similar Messages

Maybe you are looking for