Getting Started with EJB3 - Import issues

Hello, i have a question, in the following piece of code:
package cart.client;
import java.util.Iterator;
import java.util.List;
import javax.ejb.EJB;
import cart.ejb.Cart;
import cart.util.BookException;
public class CartClient {
@EJB()
private static Cart cart;
public CartClient(String[] args) {
How the client knows where is the Remote Interface cart.ejb.Cart, occurs in the deployment of the ear? in a config file?

There are a number of ways to map the remote ejb dependency declared within the Application Client to the actual target bean. You can use sun-application-client.xml to map the remote ejb dependency to the target global JNDI name. You can also use the mappedName() attribute within @EJB to set the target global JNDI name. If none of these is specified, the deployment code will assume the target Remote EJB has a global JNDI name equal to the fully-qualified name of the Remote business interface associated with the @EJB dependency.
--ken

Similar Messages

Getting Started with FCE - Problems with my imported files

Hi,
I'm trying to get started with Final Cut Express, but I'm experiencing lots of problems when I import my project from iMovie.
My project contains video, which I imported into iMovie at 960 x 540. It also contains some keynote animations, which I exported from Keynote as quicktime files.
When I export my files to FCE, I instantly get problems.
1) When I add the imported file to the sequence, I get an "Attention the clip does not match the sequence's setting or any of your sequence settings" error.
2) Whether I choose to translate my settings or not, I try to play the video in the timeline, but there is a continuous beeping sound, no audio from my video and when it hits the keynote animations, it just says "unrendered" or "media offline".
Please can you offer any advice on how I can get started with FCE more successfully.
Thanks!

Hi(Bonjour)!
(please specify iMovie and FCE version)
Well, your sequence settings in FCE should be DV-PAL 48 Khz.
Create a new sequence.
From iMovie and Keynote, export your movie with quicktime conversion andd select DV-PAL 48 kHz (*And Not* DV Stream...). This material should play without rendering because his format and codec match the sequence's codec.
Import your files and everything should be OK.
Michel Boissonneault
The audio should be AIFF 48 kHz 16 bit linear PCM

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue?

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue? Is there a work around? I have done this app twice and still cant get the exit to except the Cancel or Done bar buttons

Yes I checked it. As far as I can see I did everything Apple said to do. I took some screen shot so you can see how the screens are connected and what and where the code is, and what it does when I drag the cancel and done bar buttons to the exit

I upgrade firefox from 7 to 8 and now when i start firefox everytime it opens "getting start with firefox" page, in options i select the option 'show a blank page" how can i resolve this issue?

i upgrade firefox from version 7 to version 8, now when i start firefox everytime it open self the "getting start with firefox" website, in the options on firefox i select the 'show a blank page' but its not working. i am using firefox on windows XP- SP2.

Try restarting Firefox, the one time page(s) after starting a new release should disappear. Actually this last time with 8.0 they did not come up for me.
If that doesn't work then bring up '''about:config''' and place the url of the page into the filter. Right-click on anything that comes up and use "Reset".

What do I need to know to get started with Windows 10?

QuestionWhat do I need to know to get started with Windows 10?
AnswerWindows 10 likely looks familiar in some ways to past Windows users whether they're most familiar with Windows 8, Windows 7, or earlier versions of Windows.
To read about what's new with Windows 10, check the sections below. To learn about Windows 10 and see it in action, you can watch this video:
Desktop and Start menu
When you start your Windows 10 computer, you'll see the desktop. Like in Windows 7 and earlier versions of Windows, you'll see the Start button in the lower-left, which opens the Start menu.
The new Start menu combines aspects of Windows 7's Start menu with Windows 8's Start screen. On the left are important links, including Settings, as well as applications you use often. On the right are Modern UI app tiles. The Start menu also contains a button for power as well as a button to expand the Start menu to a full screen view.
Cortana
Next to the Start button is the Cortana search field. Cortana is a personal assistant that can help you find answers, solve issues, and search for files. You can click in the box to typer to her, click the microphone to speak to her, or press the Cortana button on select Toshiba laptops to speak to her.
You can learn more about Cortana here:
How do I use Cortana in Windows 10?
Action Center
The Action Center can be used to view notifications and access settings quickly. Hold the Windows key and press the 'A' key to open the Action Center.
Notifications are shown at the top, and toggles for various settings are located at the bottom.
On touchscreen devices, you can swipe in from the right to open the Action Center. The toggles on the bottom are sized so that you can press them with your thumb easily.

Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

Faces corkboard stuck at "To get started with Faces-"

I've named a number of faces in a mess of photos in this library imported from an older version of iPhoto, and they don't show up on the Faces corkboard. Instead, it stays at the "To get started with Faces, select a photo of people you know, click Name, and then type their names. Named people appear here on the corkboard" screen. If you mouse over the Faces icon in the source list, the tooltip says "Faces (27)", and you can step through all the faces with the left and right arrows if you get to someone's Faces page from a photo tagged at them, but you can't get to the centralized listing of everyone's face. Even clicking the "All Faces" navigation arrow from someone's Faces page brings you back to the sticky-note corkboard.
I've tried rebuilding the iPhoto library, but that didn't affect anything. The only thing that I can think of that would've affected this is that the external drive with the iPhoto Library on it was accidentally unmounted during the faces building process, but every other part of iPhoto and the Faces feature was unaffected. I haven't tried removing face.db and face_blob.db yet, since there are around 18,000 photos to reexamine and I've tagged quite a few already.
Not a major issue, since you can still get to everyone's Faces page, but it's rather annoying not having an attractive corkboard full of faces. Any suggestions?

Welcome to the Apple Discussions.
Try Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Regards
TD

Java Applet HelloWorld "Getting Started With Applets" example not working

Hi there,
It's been ages since I ran my Linux CentOS boot of Linux but I am going through the official oracle java applet tutorials, just every time I try and run the "Hello World" applet in Firefox 17.0.3 and I am running the Iced Tea thing for java applets.
Every time I try and run the example from the following code:
import javax.swing.JApplet;
import javax.swing.SwingUtilities;
import javax.swing.JLabel;
public class HelloWorld extends JApplet
// called when the user enters the html page:
public void init() // keep apps within the init() function very small as per the http://docs.oracle.com/javase/tutorial/deployment/applet/appletMethods.html
    try{
      SwingUtilities.invokeAndWait(new Runnable()
        public void run()
       JLabel myLabel = new JLabel("Hello World");
       add(myLabel);
        } // end running the application
      }); //end of swing invokeand wait
    } catch (Exception error){ // end user running the app in page
       // System.err.println("GUI didn't work on initial run");
}It keeps bringing up the error "Start: Applet not initialized" I did google that basic error and from what I found I should consult the JavaConsole, I know the console was removed from the Firefox menu quite a while ago. So went to find a way of loading it using the IcedTea one but it keeps bringing up a load of errors in even trying to run that.
Is there anyway of sorting this out? I mean I have even tried installing the one on the oracle website, the plain JDK but nothing seems to work.
Is there anyone that can help me get applets working? I was even going to go as far as to reinstall my distro but I want to avoid that as much as possible.
Thanks and I look forward to any replies,
Jeremy.

in the Getting Started with Java DB tutorial they
tell u how to set ur "DERBY_HOME" (what is that?).
once i press enter after typing this command:
set DERBY_HOME=D:\Java\Java
Phonebook\javadb in my command prompt do i get
any message or does it just go to the next line?type env or set or whatever in the command line to see what your environment variables are set to
they also tell u how to set ur "JAVA_HOME" (what is
that?). The Java installation you want to use
in their example they give u this: set
JAVA_HOME=C:\Program Files\Java\j2se1.4.2_05but in my java folder i have jdk1.6.0 and jre1.6.0
but no j2se1.4.2_05, so which 1 must i choose?It's up to you. I'd go with 1.6
also once ive done this: set
DERBY_HOME=D:\Java\Java Phonebook\javadb this
set JAVA_HOME=D:\Program
Files\Java\jre1.6.0 and this set
PATH=%DERBY_HOME%\bin;%PATH% and then type
sysinfo to verify that the variables were set
correctly i get these errors: 'D:\Java\Java' is
not recognized as an internal or external command,
operable program or batch file and '""'
is not recognized as an internal or external command,
operable program or batch file any help would
really be appreciated because this is really killing
me!you need to set your path variable - so something like:
set PATH=C:\Program Files\Java\j2se1.4.2_05\bin

Error, in Getting started with Labview. Chapter 3, part 4.

Hi.
Still struggling on, trying to find the time to work through the "Getting Started with LabVIEW" document.
Only 19 days left to go, and I'm still only in chapter 3!...
Right. In the "Saving Data When Prompted by a User" exersise, part 4...
4.   Right-click the Signals input of the Write To Measurement File
      Express VI and select Insert Input/Output from the shortcut menu to
      insert the Comment input.
Problem is, that option is greyed out, so not available!...
I did what the instructions said, I right clicked on the "Signals" input, and it doesnt do what it says on the tin!
Any pointers?   Please don't mention search the help, I've crashed the entire LV environment 3 times now, trying to search for something in there. It's OK if it finds someting, but it seems to bomb at times, when there is some ambiguity when searching.
Also, I won't be able to do anyting with any replies for a day or two, as I have to go up country to a customer, and mess about with hot oil, high volts, and lots of RF. It never ends.   (I've still got the day job to do, while trying to fight my way through this "evaluation". 30 days of "Use" would be better, than 30 calendar days for some of us.)
Regards.
Dave Baxter.
Technical Manager: AR-UK Ltd.
AR United Kingdom
OK... Who let the smoke out?

Hi Dennis, and everyone else..
That is not how it looks when first dropped on the BD. On my machine, it is partialy expanded by default, after you clear the Configure dialog that pops up ocupying most of the screen.
Again, if it makes a difference to the way the Right Click shortcut menu works, it should be documented in the Getting Started document, especialy as it seems to be a critical point.
OK, explain this...
I've just rubbed out the save to file VI, cleaned up the broken wires etc, and then planted a new one on the BD. Once I cleared the Configure dialog that covers up most of the screen before you see it the first time, the VI was partialy expanded. I forget the exact list, but "Signals" was not at the top.
I did *EXACTLY* the same again, deleted it, cleaned up, and then planted a fresh new one. That DID appear that time with nothing but the "Signals" item showing, and two down caretts below that, indicating more items.
So......
Why the different behaviour each time, on the same BD, in the same session. Some underlying working data not being correctly initialised when invoked? Of course, that never happens, right? ('C' programmes eh?)
Trying some more, it seems the behaviour loosley depends on just how close to the edge of the While loop grey border you place it.   Odd.   I have a 1280x800 screen to play with, and a 1280x1024 second screen I use for the Getting Started document. That is the absolute maximum I can have, due to hardware limits.
I also find, that if you fully expand the "Write to Measurement File" VI block, then fully collapse it, then expand it again, all the items in that list have changed places! Why?
I had noticed earlier that there is no uniformity in the layout of even the items common to many if not all VI blocks (error in, and error out to name but two) Sometimes one is above the other, sometimes the other way round, sometimes they are not even ajacent to each other. Has that been done as a source of minor ammusement or something?
Talking to another colegue here, who just wandered in to see how I was getting on with this. Seems he also has tried the introductory entry into LV (V8.something) in the past. But he too, found too many things that behaved differently from one time to another, so abandoned it as a lost cause, then decided to learn how to use Visual Basic with NI-GPIB IO instead.   Not without issues either he said, but at least it all behaves exactly the same, each and every time.
End of the day now...
Regards.
Dave B.
OK... Who let the smoke out?

Getting Started with Swept Sine (DAQmx) Multiple Response Signals

Hi,
I've been using the modified version of the Getting started with swept sine.vi for multiple response signals
https://decibel.ni.com/content/docs/DOC-24474. Program fully suitable.
However, I am facing with three issues :
1) The edits are highly non user friendly (horrible for 6 multi-channel already), and quite long to perform.
2) Would there be a way using for loops to have a more compact and flexible way to use FRF? (Calling 6 times the same program in a similar structure does not quite seem like a smart move yet I'm relatively novice in LabVIEW).
3) Be able to set the number of channels somewhere in the software, and automatically have the software to be able to cope with this? (aka if 20 multichannels are needed, no need to modify the code?)
It's probably going to be a lot of work to get there, all I'm asking for you guys is to point me in the right direction and suggestions,
Cheers,
Kentmey
Kentmey

duplicate post, continue here…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

"Tutorial - Getting Started with JSF" does not work

I tried the "Tutorial - Getting Started with JSF" located on http://www.oracle.com/technology/obe/obe1013jdev/jsfintro/jsfintro.htm#t6, but the last part "Creating a conditional navigation" is not complete.
There are 2 issues
1. The return values in the code blocks in step 9 and 11 do not match with the given example code.
2. In step 12 I am missing the way to bind this message component to returned message from the login.
Could you please correct the code parts and add the message binding piece?
Thanks,
Aard Jan

I tried the "Tutorial - Getting Started with JSF" located on http://www.oracle.com/technology/obe/obe1013jdev/jsfintro/jsfintro.htm#t6, but the last part "Creating a conditional navigation" is not complete.
There are 2 issues
1. The return values in the code blocks in step 9 and 11 do not match with the given example code.
2. In step 12 I am missing the way to bind this message component to returned message from the login.
Could you please correct the code parts and add the message binding piece?
Thanks,
Aard Jan

Just updated to latest version , getting started with Mozilla Firefox opens everytime not homepage , how do I get rid of unwanted page

I upgraded to the latest version of Firefox , when I hit the icon and firefox opens the first page that comes up is the Getting started with Mozilla Firefox and not my home page , I have checked everything I could find and nothing keeps this page from opening like it's my home page . also I unloaded download helper for the same reason , it keep opening up wanting me to upgarde to the latest version , I already had upgraded , I don't know what is going on , My home system was upgraded early last week and works fine , I double checked all setting between the two systems , nothing , Please let me know where to look , thank you , a longtime fan of Firefox.

Hi Romulus949,
You should take a look at the Knowledge Base article [[How to set the home page]].
There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. Then you can set your homepage to anything you like.
If that doesn't work you should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved].
Hopefully this helps!

Getting Started with Wireless: Wireless configuration on 877W router - STUC

Just letting you know that I've already posted an identical post under "Getting Started with Wireless" but don't feel that I'm getting any attention so I made another post. Thank you.
Hi all
I have a Cisco 877W router running IOS v 12.4(15)T3. Have been trying to configure wireless to run WPA-PSK and is stuck at the final stage. Spent a lot of time configuring the router using CLI but ended up using the Web GUI interface. I was able to configure the wireless settings (I think) but failed when connecting to the router from WinXP-SP2 and was wondering if you have any suggestion for me. I've ran the following debugs on the router:
VNRouter#sho debug
DHCP server event debugging is on.
dot11:
802.1X module WPA/WPA-PSK/CCKM key management debugging is on
dot11 Syslog debugging is on
Below is the error message when connecting wirelessly
*Mar 4 18:46:25.655: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
VNRouter#
*Mar 4 18:46:25.659: %DOT11-6-ASSOC: Interface Dot11Radio0, Station VNRouter 001b.771a.dbad Associated SSID[VN-WiLess1] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
VNRouter#
*Mar 4 18:47:25.571: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.575: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.575: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded
*Mar 4 18:47:25.579: *** Not encrypted dot1x packet from 001b.771a.dbad has been discarded.
I've created two VLANs (and tied these two vlans to 2 separate SSID) on this router for a reason and so far has not been able to connect to any of them (SSID). I've also attached the config so you can have a look. Thanks in advance for your help.

The configuration looks fine. In most cases, the connectivity issues with WPA-PSK is due to the mismatch in PSK on the Client and the AP. Try re-entering the PSK key on both the router and the client and check if you are seeing any issues.

Getting Started with BT Vision - FAQs

If you need some help getting started with BT Vision, check out our videos for information about how to install Vision yourself. Or if you fancy reading rather than watching, you can get the manuals here.
Lots of information on BT Vision can be found at www.bt.com/btvision
Don't forget to also check out our Vision Video of the week.
Functions and Features:
For technical information, and details of how BT Vision connects with other TV equipment such as video recorders and DVD players, check out our help pages.
How do I program my BT Vision remote control? The instructions for programming your BT Vision remote differ slightly depending on what model you have. Check out the link for more info.
Freeview on BT Vision:
Find out how to improve your reception and image quality on BT Vision with our handy video guide.
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hi Folks,
I am tidying up our sticky threads so have decided to archive a few more. The links of the Sticky threads that I am archiving can be found below, just encase you want to view these again.
New IP Channels - 28-02-2014
System update on June 23rd - Problems with accessing or playing on demand programmes - 20-06-2014
System update on June 24th - Problems playing On Demand programmes - 20-06-2014
Temporary issue with BBC iPlayer - Issue resolved - 21-07-2014
Problems receiving local TV Channels - 24-02-2014
Sky Sports 5 launch on Vision+ box - 11-08-2014
National Freeview Retune - 3rd September 2014 - ‎01-09-2014
BT Vision - Fresh New Look - 11-09-2014
ITV Retune on Monday 2nd February - 30-01-2015
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How do I stop the "Getting Started with Mozilla Firefox" tab from opening every time I open FF?

Every time I open FF, the "Getting Started with Mozilla Firefox" tab opens. I have checked and it's not in my homepage list.
If I open any additional windows, it doesn't open.
But, once I close all of them and reopen it again, the tab opens.
I've had a similar problem with a couple addons (ietab) doing the same thing.

about:config is typed into the address bar as if you were going to a web page.
It will popup a message warning you that you are messing with important stuff.
Just agree.

Guide to understanding and getting started with PowerBI?

Is there any good guide that will allow me to understand the advantages and disadvantages of:
PowerBI on SharePoint vs PowerBI through Office365?
And that also shows me the tools:
PowerMap
PowerView
PowerQuery
PowerPivot
I feel like these are all awesome things that could benefit my company, but I don't know enough about them.

Your best bet on getting to know these tools are the Microsoft documentation pages on getting started with any of them.
This page has an intro to Power BI and links to specific pages on each of these 'Power' tools.
An important note, Power BI is a specific product, which is available on the cloud only. The tools used with Power BI, Power Map, Power View, Power Query, and Power Pivot, are all available in regular Office 2013 Pro Plus and in Office 365 Pro Plus.
You can upload the workbooks utilizing these tools to SharePoint on premises, but you will not be utilizing the Power BI service, which is currently only available through the cloud and offers extended features to this stack of personal BI tools.
After you've read through the documentation, perhaps we can answer more specific questions here.

Getting Started with EJB3 - Import issues

Similar Messages

Maybe you are looking for