Getting the factory/original name of an effect back

Hello All,
I thought I was being soooo efficient by renaming my effects in the Effects Control Window, and now several years later I returned to a project to discover I can not recall what several of effects were originally named. I was using CS4 when I created the project. 
I tried the ABOUT button, but on most effects it doesn't display anything and on some third party effects it only shows the manufacture's name.  Is there a key combination or preference setting or toggle like in the Layers panel that shows either the Layer name/Source Name that will display the original name of the effect.
Thanks in Advance
On a Mac CS 5.5

Nope, unfortunately not. Though on AEScripts or AEnhancers there's a script that dumps all effect info to a text fiel and using the internal matchnames you would then be able to reference your renamed effects...
Mylenium

Similar Messages

  • TS1424 I keep getting the message (song name) was not copied to IPod Ipod because it cannot be played on this ipod.  Could someone tell me what this means?  I have never had this problem.

    Hi, I have been trying to down load some music to my Ipod.  I keep getting the message: (Song name) was not copied to IPod IPod because it cannot be played on this I pod.
    Can anybody help?  I have never had this problem before.

    brackenfromrincon wrote:
    Is it something about "I Shot the Sheriff" that my iPod has a moral disagreement with? It had no issue importing and installing Body Count's "Kop Killa"...
    Not really likely, is it?
    First of all, look on the iPod to see if the song is actually on there. (The last Sync of my Classic resulted in "song not copied... because it cannot be found." The song had previously been on the iPod. I checked and despite the fact that iTunes could not find the file, the song was still on my iPod. I checked the folder and the song was exactly where t was supposed to be. So I simply set iTunes to find it again. What happened? I don't know, iTunes simply threw a wobbly!)
    Second, try another Sync. Does this change anything? If the song was on the iPod, does a second Sync remove the message?  If the song was not on the iPod after the first Sync, does the second one put it on there?
    What happens?

  • How to get the current schema name

    Hi,
    Can anybody please tell me how to get the current schema name, there is some inbuilt function for this,but i am not getting that. Please help me.
    Thanks
    Jogesh

    ok folks, I found the answer at Tom's as usual.
    http://asktom.oracle.com/tkyte/who_called_me/index.html
    I rewrote it into a function for kicks. just pass the results of DBMS_UTILITY.FORMAT_CALL_STACK to this function and you will get back the owner of the code making the call as well some extra goodies like the name of the code and the type of code depending on the parameter. This ignores the AUTHID CURRENT_USER issues which muddles the schemaid. Quick question, does the average user always have access to DBMS_UTILITY.FORMAT_CALL_STACK or does this get locked down on some systems?
    cheers,
    paul
    create or replace
    FUNCTION SELF_EXAM (
       p_call_stack VARCHAR2,
       p_type VARCHAR2 DEFAULT 'SCHEMA'
    ) RETURN VARCHAR2
    AS
       str_stack   VARCHAR2(4000);
       int_n       PLS_INTEGER;
       str_line    VARCHAR2(255);
       found_stack BOOLEAN DEFAULT FALSE;
       int_cnt     PLS_INTEGER := 0;
       str_caller  VARCHAR2(30);
       str_name    VARCHAR2(30);
       str_owner   VARCHAR2(30);
       str_type    VARCHAR2(30);
    BEGIN
       str_stack := p_call_stack;
       -- Loop through each line of the call stack
       LOOP
         int_n := INSTR( str_stack, chr(10) );
         EXIT WHEN int_cnt = 3 OR int_n IS NULL OR int_n = 0;
         -- get the line
         str_line := SUBSTR( str_stack, 1, int_n - 1 );
         -- remove the line from the stack str
         str_stack := substr( str_stack, int_n + 1 );
         IF NOT found_stack
         THEN
            IF str_line like '%handle%number%name%'
            THEN
               found_stack := TRUE;
            END IF;
         ELSE
            int_cnt := int_cnt + 1;
             -- cnt = 1 is ME
             -- cnt = 2 is MY Caller
             -- cnt = 3 is Their Caller
             IF int_cnt = 1
             THEN
                str_line := SUBSTR( str_line, 22 );
                dbms_output.put_line('->' || str_line);
                IF str_line LIKE 'pr%'
                THEN
                   int_n := LENGTH('procedure ');
                ELSIF str_line LIKE 'fun%'
                THEN
                   int_n := LENGTH('function ');
                ELSIF str_line LIKE 'package body%'
                THEN
                   int_n := LENGTH('package body ');
                ELSIF str_line LIKE 'pack%'
                THEN
                   int_n := LENGTH('package ');
                ELSIF str_line LIKE 'anonymous%'
                THEN
                   int_n := LENGTH('anonymous block ');
                ELSE
                   int_n := null;
                END IF;
                IF int_n IS NOT NULL
                THEN
                   str_type := LTRIM(RTRIM(UPPER(SUBSTR( str_line, 1, int_n - 1 ))));
                 ELSE
                   str_type := 'TRIGGER';
                 END IF;
                 str_line  := SUBSTR( str_line, NVL(int_n,1) );
                 int_n     := INSTR( str_line, '.' );
                 str_owner := LTRIM(RTRIM(SUBSTR( str_line, 1, int_n - 1 )));
                 str_name  := LTRIM(RTRIM(SUBSTR( str_line, int_n + 1 )));
              END IF;
           END IF;
       END LOOP;
       IF UPPER(p_type) = 'NAME'
       THEN
          RETURN str_name;
       ELSIF UPPER(p_type) = 'SCHEMA.NAME'
       OR    UPPER(p_type) = 'OWNER.NAME'
       THEN
          RETURN str_owner || '.' || str_name;
       ELSIF UPPER(p_type) = 'TYPE'
       THEN
          RETURN str_type;
       ELSE
          RETURN str_owner;
       END IF;
    END SELF_EXAM;

  • How to get the current function name in java

    How to get the current function name in java.
    In c it is done as
    printf("%s",__func__);
    Thanx in advance.

    j0o wrote:
    System.out.println("Class Name: " + new Exception().getStackTrace()[0].getClassName() +
    "/n Method Name : " + new Exception().getStackTrace()[0].getMethodName() +
    "/n Line number : " + new Exception().getStackTrace()[0].getLineNumber());
    I pointed the OP at this approach yesterday in one of his multi-posts. I still have not been given my Dukes!

  • How to get the SQL file name in SQL*plus

    hi all,
         I have created two sql file at C drive as "c:\Createtable.sql" and "c:\Deletetable.sql"
    afterwards i open
    C:\>sqlplus
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jan 30 11:37:10 2008
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter user-name: scott/tiger
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> @C:\Createtable.sql'
    Table created.
    SQL> @'C:\Deletetable.sql'
    Table dropped.
    SQL>My problem is to get the name of the file as "c:\createtable.sql" and "C:\Deletetable.sql" in sql*plus enviornment.
    Thanks & Regards
    Singh

    Dear Damorgan,
         >>your version number to three decimal places
         My Oracle DB Version i have already stated in my previous post is 10.2.0.1.0
    Actually my problem is to get the sql files name we run in sqlplus enviornment with @ symbol. like
    i have created one sql file in c drive as
    "C:\Createtable.sql"
    afterwords i have connected to sqlplus as
    sql> conn scott/tiger
    sql>@c:\createtable.sql
    Now i want some query to get the name of the file which is run.
    In actual my problem is as
    i have suppose 10 or more SQL files in some folder ( sql1.sql, sql2.sql, sql3.sql ....).
    i created one file to call all the 10 sql files (main.sql)
    i have also one track_table which will keep track that which sql file is runned.
    I want some automated script which will insert the record in that track_table....... for that i need the name of sql file which is runned.
    Hope this will help you.
    Thanks & Regards
    Singh

  • How to get the Output File Name as One of the Field Value From Payload

    Hi All,
    I want to get the Output file name as one of the Field value from payload.
    Example:
    Source XML
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_TEST xmlns:ns0="http://sample.com">
    - <Header>
      <NAME>Bopanna</NAME>
      </Header>
      </ns0:MT_TEST>
    I want to get the Output file name as " Bopanna.xml"
    Please suggest me on this.
    Regards
    Bopanna

    Hi,
    There are couple of links already available for this. Just for info see the below details,
    The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
    //       Description: Function to create dynamic Filename
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
    conf.put(key,a);
    return "";
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
    conf.put(key,a);
    return "";
    With this udf map it with the MessageType as
    (File Name field from Payload) > DynamicFileConfiguration>MTReceiver
    Thanks
    Swarup

  • Getting the Source File name Info into Target Message

    Hi all,
    I want to get the Source file name Info into Target message of one of the fields.
    i followed Michal BLOG /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Requirement :
    1) I am able to get the Target file name as same as the source file name when i check the ASMA in Sender & Receiver Adapter , with out any UDF...............this thing is OK
    2) I took One field extra in the target structure Like "FileName" & I mapped it Like
                              Constant(" " )--UDF-----FileName
    I Checked the Option ASMA in Both Sender & Receiver Adapters
    Here iam getting the Target File name as same as Source file name + Source File name Info in the Target Field " FileName".
    I Dont want to get the Target File name as same as Source file name. I want like Out.xml as Target file name.
    If i de-select the Option ASMA in Adapters means it is showing " null" value in the target field "FileName".
    Please Provide the Solution for this
    Regards
    Bopanna

    Hi All,
    Iam able to do this by checking the Option ASMA in only sender adapter itself
    Regards
    Bopanna

  • FM for getting the logical file name

    Hi,
    is there any FM for getting the logical file name.
    Thanks
    Vikranth

    Hi,
    CONSTANTS: c_mask          TYPE char9      VALUE ',.,..'.
          Pick up the file path from the application server
    FORM f1001_browse_appl_file .
      DATA:  lcl_directory  TYPE char128.
      lcl_directory  = p_direct.
      CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
        EXPORTING
          directory        = lcl_directory
          filemask         = c_mask
        IMPORTING
          serverfile       = p_f2  " Parameter File
        EXCEPTIONS
          canceled_by_user = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
       MESSAGE e000(zmm) WITH text-039.
       flg_app = 'X'.
      ENDIF.
    Then use  OPEN DATASET for data reading
    Hope this Helps.
    Manish
    Message was edited by:
            Manish Kumar

  • How to get the current class name in static method?

    Hi,
    I'd like to get the current class name in a static method. This class is intended to be extended. So I would expect that the subclass need not to override this method and at the runtime, the method can get the subclass name.
    getClass() doesn't work, because it is not a static method.
    I would suggest Java to make getClass() static. It makes sense.
    But in the mean time, does anybody give an idea to work around it?
    Thank you,
    Bill

    Why not create an instance in a static method and use getClass() of the instance?
    public class Test {
       public static Class getClassName() {
          return new Test().getClass();

  • How to get the page FUNCTION NAME?

    Hi All,
    How can I get the page Function Name? I tried below codes but it returns null value.
    <i>pageContext.getPageLayoutBean().getAttributeValue(FUNCTION_NAME)</i>
    Please help. Thanks!

    Sorry guys, i got it now.
    instead of getAttributeValue, use .getPageFunctionName()
    :-)

  • How to get the jsp page name in jsp?

    how to get the jsp page name in jsp? how the jsp get the jsp page name dynamic.
    thanks in advance.

    Try request.getServletPath()

  • How to get the document type, name and revision from the search page cv04n

    Hello,
    After performing cv04n and getting a list of documents satisfying the search criteria, how can I then get the document type, name and revision of the selected document using ABAP?
    Thanks

    HI,
    IN table DRAW... u have Document type, Version and document number.
    In Table DRAT also u get Document Type, Version, Number and Description of Doucment.
    Regards
    SAB

  • How to get the actual font name from a font file?

    Hi
    I have only the font Path I have to get the font name from that path. Any idea how to get the actual font name?
    Thanks,

    I would ask you these questions:
    Why do you need to do this?  What are you ultimately trying to accomplish?
    Are you really asking about the InDesign SDK?
    Do you really need to get the "name" of a font from an arbitrary file?  Or do you want information about a font installed on the system?  If so, what OS?
    Do you need to be able to handle any font format?
    Which font "name" do you mean?
    What language do you want the name in?
    (1) It's not clear what you're trying to accomplish.  A bit more information about your ultimate goal would be helpful.
    (2) This question is not at all specific to the InDesign SDK.  Are you really trying to do something in the context of an InDesign plug-in?  If so, you probably want to look at IID_IFONTFAMILY and the IFontFamily::GetFamilyName function.
    (3) If you are asking more generally, Windows and Mac both have system API calls to get this information, although those tend to deal with installed system fonts, not with arbitrary font files per se.
    Also, you can parse the name table from a True Type or Open Type font without using any system APIs; as True Type and Open Type are well-documented standards.  I would start by reading these:
    The Naming Table
    Font Names Table
    (4) Although there are other standards, such as Type 1 (PostScript) fonts, and True Type Collection files and other formats, especially on Mac.
    (5) Also, when you start down this road, you will quickly realize that your seemingly simple question is actually ambiguous, and that the answer is kind of complicated, because a font can have many names (a family name, a full font name, a style name, a PostScript name, etc.).
    (6) And not only does a font have multiple names, it can have each of those names in multiple languages and encodings.
    Any clarification would make this a better question.

  • How do I get the Weblogic system name in WLS 6.1 sp2 without creating T3Client

    Hi Folks,
    In Weblogic Server 5.1, I get the weblogic.system.name using the following code:
    T3ServicesDef t3services = T3Services.getT3Services();
    String systemName t3services.config().getProperty("weblogic.system.name");
    What is the counterpart for Weblogic Server 6.1?
    Thanks in advance for your help.
    Bill

    The class doesn't seem to be documented in the normal documentation, but
    you can get an overview of the methods by executing
    javap weblogic.management.Admin
    with weblogic.jar in your classpath.
    Hope that helps,
    Nils
    Bill Lam wrote:
    >
    Jim,
    Can you tell me where I can find documentation for
    weblogic.management.Admin?
    Thank you.
    Bill
    "Bill Lam" <[email protected]> wrote:
    Jim,
    Thanks. I appreciate your help.
    Bill
    Jim Brown <[email protected]> wrote:
    Bill:
    The weblogic.server.name property in WLS 5.1 has been replaced by the
    property weblogic.Name in WLS 6.X. Although it is possible to retrieve
    this value by calling System.getProperty(), I would encourage you to
    use
    the new JMX services which have replaced our proprietary management
    interfaces (T3ServicesDef, et. al.). For example, you could write aJMX
    client to read the various properties of ServerMBean. To get started,
    here is the link to our WebLogic JMX documentation:
    Programming WebLogic JMX Services
    <http://e-docs.bea.com/wls/docs61/jmx/index.html>
    Please post any follow-up questions about JMX to the
    weblogic.developer.interest.management.general_and_jmx newsgroup.
    Besides writing a JMX client, you can also take advantage of the
    following short-cut for retrieving the server name. The remaining code
    for this example can be found in your WebLogic Server samples directory
    under: ./wlserver6.1/samples/examples/cluster/rmi/HelloClusterImpl.java
    private String getLocation(){
    String toReturn = null;
    try{
    toReturn = weblogic.management.Admin.getServerName();
    }catch(Exception e){
    System.out.println("HelloClusterImpl failed getLocation");
    e.printStackTrace();
    if(toReturn==null){
    return "";
    }else{
    return toReturn;
    Regards,
    Jim Brown
    Bill Lam wrote:
    Hi Folks,
    In Weblogic Server 5.1, I get the weblogic.system.name using the followingcode:
    T3ServicesDef t3services = T3Services.getT3Services();
    String systemName t3services.config().getProperty("weblogic.system.name");
    What is the counterpart for Weblogic Server 6.1?
    Thanks in advance for your help.
    Bill--
    Jim Brown
    Developer Relations Engineer
    BEA Support
    ============================
    [email protected]

  • How to get the main funciton name when calling another function inside?

    for eg, one RFC named A,inside A,a funtion B is called.when the processing is at B now,how can i get the main RFC name(A)?
    any help will be much appricated.

    > just see SM50,there is a column called 'Report',it shows the program id the proess is now processing.but i don't know its main program or say it 'the process's first excuting program',how can i get it programmatically?
    I'm still not sure to understand. The program in SM50 is the current main program (not the first). It is stored in SY-REPID system variable. Or use this code:
    DATA lt_callstack_long TYPE abap_callstack.
    DATA ls_callstack_long TYPE LINE OF abap_callstack.
    CALL FUNCTION 'SYSTEM_CALLSTACK'
          IMPORTING
            callstack    = lt_callstack_long.
    READ TABLE lt_callstack_long INDEX 1 INTO ls_callstack_long.
    WRITE : / 'current main program is:', ls_callstack_long-mainprogram.
    If you want to know the frame program (the first called), use SY-CPROG, or use this code:
    DATA lt_callstack_long TYPE abap_callstack.
    DATA ls_callstack_long TYPE LINE OF abap_callstack.
    CALL FUNCTION 'SYSTEM_CALLSTACK'
          IMPORTING
            callstack    = lt_callstack_long.
    " read last line = first called program
    DESCRIBE TABLE lt_callstack_long. "to make sy-tfill = number of lines
    READ TABLE lt_callstack_long INDEX sy-tfill INTO ls_callstack_long.
    WRITE : / 'First main program is:', ls_callstack_long-mainprogram.

Maybe you are looking for