Getting the formatting error in smart forms

Hi All,
When I am running the program to display the output for SMARTFORM in development system it is working fine ,But doing the same in the production system gives me the formatting error
EXCEPTIONS
FORMATTING_ERROR = 1 .
So it is the same code which exsist in 2 different system & still it works fine in the development system but errors out in the production system .
Does this mean that any smart form settings which is system dependent ?
Any pointers on this regard will be helpful .
Regards,
Anurag

Hello Guys ,
It was an authority issue
AUTHORITY-CHECK OBJECT 'S_BDS_DS'
                 ID 'CLASSNAME' FIELD classname
                 ID 'CLASSTYPE' FIELD classtype
                 ID 'ACTVT' FIELD activity.
This object was falling .
Anurag

Similar Messages

Can we get the item data in smart form

i have a header table with 3 records and item with 10 records.. i am passing both of them to the function module ( fm_name) and then in the smartform i have to get 3 pages output. but right now i am getting only one page..
to display the header data i am using secondary windows and for displaying the item data i am using tables node in the main window ( in the data tab of the tables node i am giving it as loop it_item1 into wa_item1 ). before the header row of that table node i have created a table node and in that i am prearing the item table it_item..as
describe table i_hdr line h_lines.
if h_idx LE h_lines.
READ TABLE i_hdr into wa_hdr index h_idx.
if sy-subrc eq o.
loop at it_item into wa_item where belnr = wa_item-belnr.
move wa_item to wa_item1.
append wa_item1 to i_item1.
clear wa_item1.
endloop.
endif.
this is what i am doing it right now.. and at the last row in the footer of table node i have created a command node and in that i have selected the option go to page : first page.
please correct me if my approach is wrong
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 29, 2009 12:03 PM

Hi,
You try ur logic in
do ---endo.
after describing the table .
Do the loop for the number of records available.
i.e. as per your logic.
describe table i_hdr line h_lines.
do h_lines times.
put your above code and enddo.
Hope this will work.

While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message: DiskManagementTool has died

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I get the following error when formatting a external hard drive. Partition failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory

I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.

Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
However, when I print from Safari or another program, I have no problems
== Yesterday

The only solution to corrupted files is to restore from your back up.
Regards
TD

I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error! I read the forms and done everything! Apple I name a loyal customer, please come out with an update soon!

I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error! I read the forms and done everything! Apple I name a loyal customer, please come out with an update soon!

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Error processing Smart Form BBP_PO

Hi!
We are using standard smartform BBP_PO but when I click the "Output Preview" we get a error message stating "Error processing Smart Form BBP_PO".
What have I missed?
Sincerely
Anders Öhrling
Edited by: Anders Öhrling on May 22, 2008 11:23 AM

Wrong Wrong badi was activated

How to get the last page SAP Script form

How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
Regards

Hi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max

Hi, I am getting the following error while booting up cisco asa firewall .

Hi,
I'm getting the following error form console when booting up Cisco ASA firewall...
How do we determine the issue if its hardware or software related?
ERROR: Type:2; Severity:80; Class:1; Subclass:3; Operation: 3

Dear Ravi,
You are getting the message of time out because you must be loading huge volume of data and BW runs for a specific peroid of time and then it gives a dump with message as processing is overdue.what you can do is first you should drop the indexes of the cube and then you should manually load the data-packets.I think you can again load the failed data package.select the failed data package in the monitor screen.then go to edit(on upper left next to monitor).In Edit select Init update then select "settings for further update" now select that process should be run in the background.Now right click on the failed datapacket and select Manual update.
Hope this works for you.
With Regards,
Prafulla

I am getting the following error: Unable to authenticate the package: B_SPACE_NUTRITION.itmsp ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)

I am getting the following error when attempting to deliver my iBooks Author book package via iTunes Producer: "
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)"
I understand that there's something wrong with the TOC file (.ncx), but I have tried everything and nothing seems to work. Every section of the TOC is labeled, so not sure why the navLabel issue is happenening.
Any help is GREATLY appreciated! Thank you.

Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error. This occured after my macbook pro shut down (because of low battery) while it was installing some updates. Please Help?

Try reinstalling OS X. What version did you have installed? If it's Snow Leopard do this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

How do we write the sub routines in smart forms?

1) How do we write the sub routines in smart forms?
2) What is the form interface in smart forms?
3) Write down the path for writing for select queries in smart forms?
4) How do we put dynamic page break in smart forms?
5) in which system field contain the total page number of all forms in the currently processed print request in smart forms?
6) What is the name of function module used to calling smart forms?
1)     What is the functionality of function module controal_form?
2)     How do we print the system date in this format 15th Jan 2008 on scripts?
3)     What r the various print modes available in scripts?
4)     What is the tcode for text element?
5)     How do we draw horizontal line in scripts?
6)     How can we suppress the leading zeros for a field in scripts?
7)     In which system field is used to print current no page in scripts?
Which f.m is used to reads text in sap scripts

1) How do we write the sub routines in smart forms?
after opening form see global definitions
click on that there one tab called form routines inthat you can write subroutines logic.
You can call in program lines .
2) What is the form interface in smart forms?
It is an interface between program and form .
like function module we provide import,export,tables,exceptions
Based on import and export parameters form will display for us.
3) Write down the path for writing for select queries in smart forms?
On window give right click in that command->programlines
you can write all select statements.
4) How do we put dynamic page break in smart forms?
you can define break point using break-point<>. syntax.
5) in which system field contain the total page number of all forms in the currently processed print request in smart forms?
SFSY-PAGE
SFSY-JOBPAGES
6) What is the name of function module used to calling smart forms?
SSF_FUNCTION_MODULE_NAME
=================
1) What is the functionality of function module control_form?
This function module is used to insert SAPScript control commands like NEW-PAGE etc from whithin the ABAP program.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND    =
EXCEPTIONS
UNOPENED   = 1
OTHERS        = 3
IF SY-SUBRC NE 0.
MESSAGE ...
ENDIF.
2) How do we print the system date in this format 15th Jan 2008 on scripts?
Use SET DATE MASK to change format of date display.
3) What r the various print modes available in scripts?
4) What is the tcode for text element?
se91
5) How do we draw horizontal line in scripts?
&ULINE&
6) How can we suppress the leading zeros for a field in scripts?
&it_vbak-vbeln(Z)&
7) In which system field is used to print current no page in scripts?
&SYST-PAGE& of &SYST-FORMPAGES&
Which f.m is used to reads text in sap scripts
READ_TEXT functiomodule.
Reward points

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

QT won't stream videos. I get the 2048 error. How do i fix this?

Okay, here is the deal. For about 3 weeks i've read stuff online about this issue that has not helped me. Let me break it down
I've converted some video's to Mov files and i'm streaming them to some friends. They are able to watch the video from the stream nin QT but i get the 2048 error. I've tried everything that i can think of.
I've read that i should change the file from mov to something else, but i was also told the file has to be mov format to stream.
I'm not interested in watching the file in VLC or anything else. In order for me to share the videos it has to be QT.
I thought it could be my firewall but that doesn't seem to be the case. I've unistalled QT and reinstalled it as well
I really need to get my QT to view these files. I even called apple who blew me off. I have the latest version of windows and QT pro.
I need some help..please feel free to explain the solution to me like I'm 5. I'm not great with this stuff.
Thanks

With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), cassi, the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program

TS1424 Trying to DL a free app & I'm getting a message saying my billing info is needed because my security code is wrong. Once I put it in,I'm still getting the same error message

Trying to DL a free app & I'm getting a message saying my billing info is needed because my security code is wrong. Once I put it in,I'm still getting the same error message

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/

Getting the formatting error in smart forms

Similar Messages

Maybe you are looking for