Please help, I'm at the end of my rope...
I got my 30gb video iPod a couple of months ago. Well, today I was running iPod restore and it got unplugged. Since that happened, my iPod can't be recognized by any USB port on my computer or on my friends mac. We've tried using different cables in case they were damaged and that didnt' work. My iPod does make the sound like it's trying to load something but it just keeps repeating and doesn't stop unless i plug it in or unplug it. Also, nothing shows up on the screen even if I reset it or try to put it into Disk Mode. Is there anything I can do or will I have got get it serviced?
XPS M1710 Windows XP Pro
Now I've got another problem with it. After I posted my original question here, I didn't touch my iPod again. Well it just made a horrible noise that sounded like two pieces of steel grinding against one another. It hasn't made a single sound since then and now it's completely cold. I fear the worst for my shiny companion...It seems that my only option now is to get it serviced but feel free to post anything that you may think will help.
R.I.P, little buddy.
Similar Messages
-
Please help find driver, at the end of my rope with this ca
I purchased a used soundcard from a computer repair shop near here a few months back. The sound card did not come with an installation CD. So i was pretty much left on my own to find drivers for it. Ive got a good many years experience building pcs so i figured this wouldnt be a problem. How WRONG i was lol. After being unable to find drivers for it originally I finally gave up and put the card in a static protection bag i had laying around and havent thought about it much since then just counted it as a loss. Now im back at it trying again to find drivers to get this card to work.
The following is every bit of information i feel applicable to this sittuation, however if anymore infos needed please let me know and ill try to provide it.
My operating system= windows XP with SP2
The following is off the card itself. (which says its a creative sound blaster Li've!)
Theres an inkstamp on the uppper left hand corner of the non chipset side that reads
32AMN08B 853
94v-0 k
(backwards RJ looking symbol)e9697 3999
Serial number= m48309402990
Model number= CT4830
Steps i've taken so far are i originally went to the creative search function and looked for the drivers on their site it gave me a link to two files which i downloaded.
This is the link where i downloaded the following files
http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP®ion=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=26&y=
And this of course is the two files i got.
. Li'veDrvPack_Patch.exe
2. Li'veDrvUni-Pack(ENG).exe
File number one has a warning as follows:
(This is an update patch, it is not a complete driver installation. You must have the previous Li'veDrvPack.exe (SBLW-XPWEB-W3-US), posted July 7,2002. in your system if you wish to use this patch.)
Ive searched the site i cant find this file (SBLW-XPWEB-W3-US) after searching through the forums a bit i found this thread http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677&vie w=by_date_ascending&page=
Which had lists of ISOs for all the different installation CDs. I downloaded everything i seen on filefront (http://hosted.filefront.com/BadBoyforum) badboy had posted that had LIVE in the name. These include the following ISOs.
. SB Audigy & Li've!.iso
2. SB Li've! 5. (SB0228).iso
3. SB Li've! 5. (SB0229).iso
4. SB Li've! 24bit.iso
I mounted each image in daemon tools and attempted to install and recieved the following error
ERROR= Setup could not detect any sound blaster audio card on your system. Please ensure that your sound blaster hardware is properly installed before running this setup program. Setup will now exit.
Im kindve at a loss as how to proceed. Ive tryed looking through driverguide.com and a few other generic driver sites without much luck. If anybody at all has any suggestions on this id be very appreciati've. Like i said its a used card so it could be an OEM but it appears to be an ODM but who knows im by no means an expert on all this. I may have missed one of the LIVE isos off that filefront site but i dont think so. The only one i see thats left is the external one and its an internal card so i dont see how that could be right.shadowcage wrote:
okay well i tryed the patching method on all of the isos i had after extracting them.
I patched it and it said it was successful. when i ran each successi've setup it still didnt detect any soundblaster hardware.
I also went to compaq and tryed a driver i found there without any luck. Im thinking at this point it is an OEM
Although i still dont understand how you got compaq from the model number, im going to continue looking around their site.
Maybe ill luck out but so far im about to the point im ready to throw this @#$%@%#@$@##@$#@$% thing away lol.
Im looking on driver guide now again. :Sighs This is so aggrivating Normally i wouldnt have bought a card without the drivers but
my wifes the one that got it and she didnt know. Oh well......
You can get the model information from here.
You can also try by installing kX drivers -> if kX package don't get installed, your card may have some problems.
kX Home pages - http://kxproject.lugosoft.com/index.php?skip=
kX support forum - http://www.driverheaven.net/forumdisplay.php?f=74
jutapa -
Please help urgent Calculation at the end of alv report
Hi ..
It is necessary to define clearly col1 first record is 10 col2 first record is 20 ..
col1 second record is 15 col2 second record is 25 .
COL3 first value is 10 / 20 .
col3 second value is 15 / 25 .
This datas come from internal table .
When I add at the end for all columns it get wrong calculation or lets say I want to do like total col1 10+ 15 total col2 is 20+ 25 . Total column3 is would like to be 25 / 45 .
How can I insert a line which is doing this operation in my alv .try this
first
DATA : SAT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = SAT_EVENTS[].
READ TABLE SAT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
APPEND LS_EVENT TO SAT_EVENTS.
ENDIF.
READ TABLE SAT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE 'END_OF_LIST' TO LS_EVENT-FORM.
APPEND LS_EVENT TO SAT_EVENTS.
ENDIF.
form for end of list
FORM END_OF_LIST.
DATA: P_HEADER TYPE SLIS_T_LISTHEADER,
PA_HEADER TYPE SLIS_LISTHEADER.
DATA: INFO(100).
info = <your calculated value for col3>
PA_HEADER-TYP = 'S'.
PA_HEADER-INFO = INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = P_HEADER
I_LOGO =
I_END_OF_LIST_GRID = 'X'
ENDFORM. "END-OF-LIST
in REUSE_ALV_GRID_DISPLAY pass
IT_EVENTS = SAT_EVENTS[]
hope this will work
regards
Shiba dutta
Message was edited by:
SHIBA DUTTA -
Can anyone help, i am at the end of my rope.=(
I recently purchased the Linksys EA3500 and cannot get my port to open. I set up "single port forwarding" correctly i hope but when i ask my "check port tool" to check the port, it always shows a ip that i dont even know. I run on lan (home) and my wife runs hers on Wifi thro the same router. I did the cmd...ipconfig /all thing, entered the IPv4 ip, the subnet and the DNS but no matter what i do, the site keeps telling me when they go to check my router for open port, they were "Refused" So any help with this
Hey, I hope I am not too late.
In order for your port forwarding to work, you have to point it to the IP address of your router. On the setup page, about the middle of the page, there is a 192.168.1. then a box; place a value in the box, which will complete the ip for your router's port forwarding.
save it then, try again. Just did that on mine, I found alot of information on the www.portforward.com web site. -
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
I bought the app peru tv in march. Sometimes it stays idle when downloading a tv channel so I ended up deleting the app and reinstalling it. Today I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't replied regarding problems with channels and lost app
In order to properly upgrade the OS of your Mac. 10.1 Puma is really old. Your Mac has to meet the tech specs for Lion: And it would probably need to be a clean install. If you recently purchased Lion. Call Apple Care CPU and ask them to be sure. You get 90 days Free of phone support. 1-800-275-2273
Apple - OS X Lion - Technical specifications
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply. -
How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution
Hi Ramesh,
In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any other end user or team.
Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
Hope this helps solving your query -
Please help me to close the IF blocks.
HI EXperts,
Please help me on closing the IF blocks properly in the below procedure.
CREATE OR REPLACE PROCEDURE sums_proc
Id INTEGER,
mtrname VARCHAR2
mtrtype INTEGER,
AS
state VARCHAR2(10);
accesslevel INTEGER;
asts NUMBER;
mtrtypesql LONG;
sumsql LONG;
BEGIN
SELECT st_name INTO state FROM states_info WHERE st_name = 'KARNATAKA';
SELECT acc_level INTO accesslevel FROM level_table WHERE level_id = 4;
IF (accesslevel = 4) THEN
BEGIN
asts :=4;
END;
ELSIF (accesslevel = 3) THEN
BEGIN
IF (OBJECT_ID('CANN_TABLE') IS NOT NULL) THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE CANN_TABLE';
END;
EXECUTE IMMEDIATE 'CREATE TABLE CANN_TABLE';
END;
ELSE
BEGIN
IF OBJECT_ID('MANN_TABLE') IS NOT NULL THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE MANN_TABLE';
END;
EXECUTE IMMEDIATE 'CREATE TABLE MANN_TABLE';
END;
IF (mtrname IS NULL OR mtrname = '') THEN
mtrname := '';
ELSE
mtrname := 'DEFAULT';
IF (mtrtype > 2) THEN
mtrtypesql := ' AND (mtr = 1) ' ;
ELSE
mtrtypesql := ' AND (mtr = 2) ';
END IF;
IF (mtrtype = 1) THEN
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM sales_table WHERE sales_type=''SALES''||mtrtypesql';
END;
ELSIF (mtrtype = 2)
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN''||mtrtypesql';
END;
IF (mtrtype = 4 OR mtrtype = 3) THEN
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN''||mtrtypesql';
END;
ELSIF (mtrtype = 10 OR mtrtype = 15) THEN
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE revenue_type=''REVENUE''||mtrtypesql';
END;
ELSE
BEGIN
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE all_type=''ALL''||mtrtypesql';
END;
sumsql := ' SELECT SUM(amount) FROM salesum_table';
EXECUTE IMMEDIATE mtrtypesql || ' UNION all ' ||sumsql ;
IF OBJECT_ID('CANN_TABLE') IS NOT NULL THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE CANN_TABLE';
END;
END IF;
IF OBJECT_ID('MANN_TABLE') IS NOT NULL THEN
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE MANN_TABLE';
END;
END;
Please help me.
Thanks.Hi,
Thanks for your help.
Please help on the error.
ORA-24338: statement handle not executed
CREATE OR REPLACE PROCEDURE sums_proc(
p_Id INTEGER,
mtrname VARCHAR2 mtrtype INTEGER,
P_out OUT SYS_REFCURSOR
AS
state VARCHAR2(10);
accesslevel INTEGER;
asts NUMBER;
countval NUMBER :=0;
mtrtypesql LONG;
sumsql LONG;
v_query LONG;
BEGIN
SELECT st_name INTO state FROM states_info WHERE st_name = 'KARNATAKA';
SELECT COUNT(*) INTO countval FROM level_table WHERE level_id = p_id;
IF countval = 0 THEN
RETURN;
ELSE
SELECT access_id INTO accesslevel level_table WHERE level_id = p_id;
IF (NVL(accesslevel, 0) = 0) THEN
RETURN;
END IF;
END IF;
IF (accesslevel = 4) THEN
asts :=4;
ELSIF (accesslevel = 3) THEN
IF (OBJECT_ID('CANN_TABLE') IS NOT NULL) THEN EXECUTE IMMEDIATE 'DROP TABLE CANN_TABLE';
ELSE EXECUTE IMMEDIATE 'CREATE TABLE CANN_TABLE(SM NUMBER)';
END IF;
ELSE
IF OBJECT_ID('MANN_TABLE') IS NOT NULL THEN EXECUTE IMMEDIATE 'DROP TABLE MANN_TABLE';
ELSE EXECUTE IMMEDIATE 'CREATE TABLE MANN_TABLE(SM NUMBER)';
END IF;
IF (mtrname IS NULL OR mtrname = '') THEN mtrname := '';
ELSE
mtrname := 'DEFAULT';
IF (mtrtype > 2) THEN
mtrtypesql := ' AND (mtr = 1) ' ;
ELSE
mtrtypesql := ' AND (mtr = 2) ';
END IF;
IF (mtrtype = 1) THEN
mtrtypesql := 'SELECT SUM(amount) as amount FROM sales_table WHERE sales_type=''SALES'''||mtrtypesql;
ELSIF (mtrtype = 2)
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN'''||mtrtypesql;
ELSIF (mtrtype = 4 OR mtrtype = 3) THEN
mtrtypesql := 'SELECT SUM(amount) as amount FROM margin_table WHERE margin_type=''MARGIN'''||mtrtypesql;
ELSIF (mtrtype = 10 OR mtrtype = 15) THEN
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE revenue_type=''REVENUE'''||mtrtypesql;
ELSE
mtrtypesql := 'SELECT SUM(amount) as amount FROM revenue_table WHERE all_type=''ALL'''||mtrtypesql;
END IF;
sumsql := ' SELECT SUM(amount) FROM salesum_table';
v_query :=||mtrtypesql || ' UNION all ' ||sumsql ||';
OPEN P_out FOR v_query;
COMMIT;
END;
My requirement is
IF accesslevel = 0 or IF accesslevel is not existed the program should come out.
SO that I have included the below code
SELECT COUNT(*) INTO countval FROM level_table WHERE level_id = p_id;
IF countval = 0 THEN
RETURN;
ELSE
SELECT access_id INTO accesslevel level_table WHERE level_id = p_id;
IF (NVL(accesslevel, 0) = 0) THEN
RETURN;
END IF;
END IF;
I want to send the result set to front so that I have replaced the below statement with
EXECUTE IMMEDIATE 'BEGIN INSERT INTO CANN_TABLE '||mtrtypesql || ' UNION all ' ||sumsql ||';
OPEN P_out FOR v_query;
If I get accesslevel as 0 I am getting error when executing thic procedure.
ORA-24338: statement handle not executed
Please help me.
Thanks. -
Please help me to build the logic
Hi All,
Please help me to implement the following logic.
The conditional statements should not only be executed in sequence, but also if any of them are true they should not be overridden by any subsequent conditional statements being true.
When actual effort Accepted or Rejected for AST proposals and calculate a flag for “enhance to AST guideline” = Y/N as follows for each employee and display at the employee level
1)If AST eligibility = N AND proposed AST % >0, then “N”
2)Else If AST eligibility = N AND proposed AST % = 0 then “n/a”
3)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST = 0 then “Y”
4)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST >0 then “N”
5)Else If AST eligibility = Y AND Act Rank = 2 AND proposed AST = 0 then “Y”
6)Else If AST eligibility = Y AND AST % is greater than or equal to the AST guideline minimum AND less than or equal to the AST guideline maximum, then “Y”
7)Else If AST eligibility = Y AND AST % is less than the minimum guideline OR greater than the maximum guideline, then “N”
I tried the following code but I am not getting the expected result .
Could you Please help me to build the logic.
Your earliest response is very helpful to me.
if (upper(P_stat)='ACCEPTED' or upper(P_stat) like 'REJECTED%') then
else if NVL(P_elgi,'N') <> 'Y' AND P_prop > '0' then
P_flag := 'N';
else if(NVL(P_elgi,'N') <> 'Y' AND P_prop = '0') then
P_flag := 'N/A';
else if ((NVL(P_elgi,'N')='Y') AND P_rank = '3' AND P_prop = '0') then
P_flag := 'Y';
else if((NVL(P_elgi,'N')='Y') AND P_rank = '3' AND P_prop > '0') then
P_flag := 'N';
else if((NVL(P_elgi,'N')='Y') AND P_rank = '2' AND P_prop = '0') then
P_flag := 'Y';
Else if (P_prop >=ast_min_guide AND P_prop <= ast_max_guide ) then
P_flag := 'Y';
else
((P_prop < ast_min_guide) OR (P_prop > ast_max_guide)) then
P_flag := 'N';
end if;
end if;Thanks for ur quick responce .
When actual effort Accepted or Rejected for AST proposals and calculate a flag for “enhance to AST guideline” = Y/N
Once the above condition is satisfied we have to check for remaing conditions
if (upper(P_stat)='ACCEPTED' or upper(P_stat) like 'REJECTED%') then
once it is satisfies then we have to go for remaing conditions.
how can we do it in CASE statement.
1)If AST eligibility = N AND proposed AST % >0, then “N”
2)Else If AST eligibility = N AND proposed AST % = 0 then “n/a”
3)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST = 0 then “Y”
4)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST >0 then “N”
5)Else If AST eligibility = Y AND Act Rank = 2 AND proposed AST = 0 then “Y”
6)Else If AST eligibility = Y AND AST % is greater than or equal to the AST guideline minimum AND less than or equal to the AST guideline maximum, then “Y”
7)Else If AST eligibility = Y AND AST % is less than the minimum guideline OR greater than the maximum guideline, then “N”
I tried the following code but I am not getting the expected result . -
Please help me to solve the issue in my query.
Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0) -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
-
I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
Please help me ,i forgot the synchronising password for my mac pro lion backup disk
please help me ,i forgot the synchronising password for my mac pro lion backup disk
If the backup volume is encrypted, and you forgot the password, then you'll have to erase the volume and start a new backup. There's no way to recover the password.
Maybe you are looking for
-
I just factory restored my iPod 5 touch and when I plug it into iTunes to back it up, iTunes stops responding and closes. This only occurs when the iPod is plugged in, when it isn't, iTunes works fine. I am using Windows 8 and iTunes is updated (as o
-
Can anyone tell me where I might find my movie,
Can anyone tell me where I might find my movie, its not in the project file......I closed imovie and when I came came back the next day, the project was gone! Any input would be greatly appreciated! Thanks in advance!
-
How can I get rid of the "unnamed" feature in iPhoto?
I don't care what the name of the person is. I WANT TO SEE THE PHOTOGRAPH. Without the word "unnamed" showing up under every single **** face. So frustrated. Please help me get rid of this. I don't care about this feature at all.
-
How can I just email a photo without a set up and text and all that stuff?
I used to be able to select a photo and email it - no and for quite a while a whole set up appears with place for text and choices of design, etc. Can I no longer just send plain unadorned photo? I have a MBP 2010 running Lion. Thanks.
-
How import flac files into itunes
how do you import flac files into itunes on a mac? thx