Getting Total number of pages in Reports 3.0?

In the layout model of a report I want to access the value of
Total Pages in a format trigger on a repeating frame. You can use
srw.get_page_num to get the current page number but I want the
curent value of Total Pages. Can this be done?
null

Welcome to the forums!
Keynote does not have a way to automatically insert the total number of slides. You would have to do this manually (although you could do it on the slide masters, so that only one or a few would have to be changed).

Similar Messages

  • How do I print the total number of pages in report, like Page 1 of 5?

    Hi
    How do I print the total number of pages in report, like Page 1 of 5?
    thanks,
    kiran.M

    Hi,
    Check for the below code:
    *Declare a variable
    DATA L_PAGE_COUNT(5) TYPE C.
    *Copy this code to the end of program
    *Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
    READ LINE 1 OF PAGE SY-INDEX.
    REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
    MODIFY CURRENT LINE.
    ENDDO.
    TOP-OF-PAGE.
    WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
    You will find your solution in below thread with code:
    Total Pages in Basic List
    Rgds,
    Shakuntala

  • Can I get total number of page in 'After Report' Trigger?

    Currently, I use the format trigger of a field in Margin. In the trigger, I use srw.get_page_num(page_num) to get the current page number and call a package procedure to update a record. For example, if the report has 10 pages, it will update 10 times. However, could anyone know can I use another method instead? (Get the total number of page in one, then no need to update it every page) Thank you.
    (using Report 2.5)

    Thanks. I know I can choose &TotalPhysicalPages in a field for displaying. But the problem is I need to update DB for that number. So I cannot refer that value of field to run a procedure in package for update the total page number in a record. Actually, this function is already done for years. (as I mentioned in my previous message) But I would like to know can I use another method to update it in one time instead. Thank you.

  • Getting total number of pages

    Hello friends at www.oracle.com ,
    I need to know what's the Reports variable that gets the total number of pages, and how I can refer it in a PL/SQL block.
    I know there's an SRW function to get the actual page number (SRW.GET_PAGE_NUM), but I need to know if there's a function, or system variable, that gets the total number of pages that will be printed during Reports execution.
    Thanks,
    Franklin Gongalves Jr.
    [email protected]

    I am not sure of any variable to use in PL/SQL but instead u can use a field by urself
    like serial_number using summary column in ur report
    which u can check the value similar to total pages
    If u need help let me know
    Sri
    Hello friends at www.oracle.com ,
    I need to know what's the Reports variable that gets the total number of pages, and how I can refer it in a PL/SQL block.
    I know there's an SRW function to get the actual page number (SRW.GET_PAGE_NUM), but I need to know if there's a function, or system variable, that gets the total number of pages that will be printed during Reports execution.
    Thanks,
    Franklin Gongalves Jr.
    [email protected]

  • How to get total number of pages from .doc file without using Office interop?

    Hi,
    Kindly help me in getting the total number of pages from a .doc file not .docx file using C#. I know how to get by using Office interop but I do not want to use Office interop.
    So, without office automation in C# let me know how to get the total number of pages from a .doc file.
    Regards,
    Ashok

    Hi Ashok,
    >> I know how to get by using Office interop but I do not want to use Office interop
    Could you tell us why you don't want to use Office interop?
    As far as I know, this is the easiest way to achieve.Hmmm,this is my answer
    http://msdn.microsoft.com/en-us/library/microsoft.office.interop.word.pagenumbers.startingnumber(v=office.14).aspx
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I get total number of pages in the folio?

    Hello guys, I need some help.
    I'm trying to get  the total number of pages in the folio, but, currently, I only success to get the total number of pages from current article, is there someway to get it? 
    My code: gist:de1de89b493024815c3e
    Thanks so much.

    My first advice in situations like this is the double and triple check that this requirement still exists and it is driven
    by the business.  This is great opportunity to refactor some unnecessary complexity out of the solution if you identify it.
    Assuming it is a valid and verified requirement, how you approach depends on the composition of the Interchange.  Meaning, if you receive single ISA...IEA blocks with a single GS...GE, you can use the max of BTS.InterchangeSequenceNumber.
    If you receive multiple ISA or GS's, it's a little different.

  • How to get the total number of pages printed in a report?

    Hi All,
    I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
    Thanks,
    Srini.

    i found the solution, thanks

  • Getting the total number of pages inside a report

    Post Author: jportelas
    CA Forum: .NET
    Good afternoon:
    How can I get the total number of pages inside a reportdocument object???
    I'm currently using VS.NET 2005.
    Thanks for the help.

    There's no public API to get this info directly from RAS.
    Option is to either walk through pages in the CrystalReportViewer till you get to the end, or use the non-public not-for-public use API:
    int lastPageNumber = ((com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource) reportClientDocument.getReportSource()).getLastPageNumber(new com.crystaldecisions.sdk.occa.report.reportsource.RequestContext());
    Sincerely,
    Ted Ueda

  • How can I get a report with total number of pages printed on my HP Officejet Pro 8610?

    Since knowing the number of pages I print is so critical to a choice of using the "HP Instant Ink Plan" or not, how can I find the total number of pages I have printed on my brand-new (installed 2 days ago) 8610?  And if I can, is it a "resettable" or rolling total?  Don't see anything in user guide and a search yields nothing usable on this blog.
    Printer is installed wirelessly on an older PC with Windows XP SP3.  I can also of course intstall it with network cable but so far it works OK on my home network without network cable.  If it matters which OS, I also have a Lenovo laptop running Vista on which I can install this printer. 
    Please do not respond that I can find the total by counting the number of pieces of paper I have.  Surely the internals of this fine machine must have the requested data so that HP can tell my usage if I select the monthly ink plan!
    This 8610 was a good buy (net $89.00 after trade-in of my six year old J36xx Deskjet) at Office Depot/Max which of course influenced my decision to buy it.  So far I am very happy with printing qualities and speed, have not tried the scanner yet and will probably never use the fax since I have no land line phone. 
    Thanks,
    Harry
    This question was solved.
    View Solution.

    Hi,
    Section #2 of the Printer Ststus report will tell you. Please try:
    Printer status report
    Use the printer status report to view current printer information and ink cartridge status. Also use the printer status report to help you troubleshoot problems with the printer.
    The printer status report also contains a log of recent events.
    If you need to call HP, it is often useful to print the printer status report before calling.
    To print the Printer Status Report
    1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup.
    2. Touch Print Reports and then touch Printer Status Report.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to retrieve total number of pages in a report of Instance - RAS SDK ?

    Hello All,
    Hope all is well. I am using BOXI R2 Enterprise and was wondering how to get total # of pages of an Crystal Report Instance using RAS SDK.
    Thanks in advance,
    Sam

    How do i retrieve the total number of pages in a report-- via RAS SDK
    Sincerely,
    Ted Ueda

  • Total number of pages in Normal Report

    How to display the total number of pages in normal report.
    To display current page number I am using sy-pagno.
    Is there any system variable to display Total numbetr of pages in normal report.
    Thanks in advance.

    Hi,
    There is no system variable to find total no of pages but you can use the following to get that one.
    Declare a variable
    DATA L_PAGE_COUNT(5) TYPE C.
    Copy this code to the end of program
    Page count will be printed on each page here
        WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
        DO SY-PAGNO TIMES.
            READ LINE 1 OF PAGE SY-INDEX.
            REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
            MODIFY CURRENT LINE.
        ENDDO.
    TOP-OF-PAGE.
        WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
    *--- End of Program
    Thayalan

  • In report how to get total no.of pages

    Hi all,
    i need to display at footer 'Page No.' of 'Total No.of pages'.
    is there any variable for total no.of pages.
    regards.
    cnu

    Hi...
    The code below shows how to display the total number of pages in a report like "Page 1 of 8."  May be this would solve your problem... (Award points if useful)
    Santosh
    REPORT YPAGECOUNT NO STANDARD PAGE HEADING LINE-COUNT 65.
        DATA L_PAGE_COUNT(5) TYPE C.
    TOP-OF-PAGE.
        WRITE: /(70) 'Heading' CENTERED, 70 SY-PAGNO,'of ', '-----'.
        ULINE.
    START-OF-SELECTION.
      Real list output takes place here
        DO 300 TIMES.
            WRITE: / 'Line #', SY-LINNO.
        ENDDO.
      Page count will be printed on each page here
        WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
        DO SY-PAGNO TIMES.
            READ LINE 1 OF PAGE SY-INDEX.
            REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
            MODIFY CURRENT LINE.
        ENDDO.

  • How to get the number of page by creating OLE microsoft word document

    Hihi Experts,
    I have generated a word document using ole in sap abap report.
    May i know which command can i use to call the word object to get the number of page before closing the word document?
    eg. call method of wordobj 'insertpagefield' ? and i need to require the page number in a variable eg. gv_pagenumber for other filtering purposes.
    Thanks and Regards,
    li Hui
    Edited by: lihui lil on Aug 11, 2009 9:35 AM
    Edited by: lihui lil on Aug 11, 2009 12:36 PM

    hi,
    use the following code:
    CALL METHOD OF gv_selection 'Information' = gv_curpage
        EXPORTING
        #1 = 3. " get current page number
      CALL METHOD OF gv_selection 'TypeText'
        EXPORTING
        #1 = gv_curpage. "show current page number
      CALL METHOD OF gv_selection 'TypeText'
        EXPORTING
        #1 = ' of '.
      CLEAR gv_endpage.
      CALL METHOD OF gv_selection 'Information' = gv_endpage
        EXPORTING
        #1 = 4. "get total page number
      CALL METHOD OF gv_selection 'TypeText'
        EXPORTING
        #1 = gv_endpage. " show total page number
    Edited by: VoonHan on Oct 13, 2009 7:35 AM

  • How to Access Total Number Of Pages inside code

    Hi All,
    I would like to get the total number of pages in the report,inside the trigger.
    How can i access this value inside code.
    Pls Help me
    Thanks and Regards
    Binu

    I think this is not possible inside the code, because this value is deteremined after the code is executed and during the formatting of the report.

  • Print number of pages with Report Generation toolkit

    I use the report generation toolkit and the Print Report.vi to print a table and some text extracted from a MS Access database. The result of this is a print out that takes up several pages.
    Now, on each page i want something like (Page x of y), and I do not want to buy more expensive NI packages for this simple thing. I know it should be possible since the Report Express vi can do it --- which for me is a useless vi.
    I do not consider it a nice solution to try and keep track of the number of pages myself by dividing the table into more tables and use the new page vi between each "page table". This I would not like to do since depending on paper size, font size, and length of text strings in each cell this will be virtually impossible.
    By moving into the Print Report.vi I've tried to see if I somehow can extract the info --- I've not found anything usefull but expect a workaround to possible.
    Any suggestions?
    Cheers,
    Martin

    Hi Skinny,
    There are some tokens you can use in the headers and footers of Standard Reports generated by the Report Generation VIs.  If you take a look at [LabVIEW]\examples\reports\TextReportExample.llb\Text Report Example.vi, you'll see that the right footer text of the report has the token <pagenofm>, which generates a footer of the form "1 of 10", to indicate page 1 out of 10 pages.  There's also another tag you can use, <page>, that just lists the page number itself without a total number of pages.  If you look at the help for the Set Report Header Text.vi or Set Report Footer Text.vi, you'll see a link in the help for all the different "tokens" you can use with the report header and footer.  Actually, now that I think about it, you can use these tokens anywhere in the report, including the body text.
    Good luck,
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

Maybe you are looking for

  • No firewire after turning of mains power - SMU reset needed to fix

    Everytime I turn the mains power off on my 20" G5 imac when I reboot I've lost all my firewire connections. If I do a SMU reset they both come back. It's a new logic board having been replaced on Apple Care for the overheating and fan problems. Unfor

  • How do I add a logo into an email?

    I'd like to send out messages incorporating my company logo. If I drag the logo into the body of the message (it's in a .png format) it becomes an attachment, which is not what I'm looking for. What would be the best way to send out mail so that the

  • J2ee Web application exploded format in oracle 10g

    Hi, I am trying to develop a simple j2ee application in Exploded Format in oracle 10g AS. i have created a new OC4J instance called TestOC4j for this. A .war file works fine in this instance. I have placed the application under applications directory

  • Process code

    Dear All, I have my idoc number and message type, partner type. I checked WE20 and in partner type, message type is defined. When i double click on message type, i found no process code. This is outbound idoc. Could you please let me know how to find

  • I can't read PDF files online, they must be saved. How can I go back to having the option to read them online?

    When I click on a link to view a PDF file, Firefox tries to make me save the file. This started when I clicked the "do this every time" check box for ONE file. Now I can't undo the selection and my Applications Options control window is completely bl