Getting zero-sized reply error when running report from SQL query
Hi,
I have a Report from SQL Query in Portal. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena
Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?
Similar Messages
-
Getting Zero Sized Reply error in report from SQL query
Hi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
LorenaHi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena -
Internal server error when running report from form
i am getting the following error when I run a report from a form using 9i:
java.lang.NumberFormatException: mgb_5
this is my code:
DECLARE
repid REPORT_OBJECT;
vc_rep VARCHAR2(20);
vc_URL VARCHAR2(100);
vc_rep_job VARCHAR2(10);
BEGIN
repid := find_report_object('rep2');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'C:\uni\mdt\cw1\rep2.rdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'rep_mgb');
vc_rep := RUN_REPORT_OBJECT(repid);
vc_rep_job := substr(vc_rep,instr(vc_rep,'_')+1);
vc_URL := '/reports/rwservlet/getjobid' ||vc_rep_job||'?server='||get_report_object_property (repid,report_server);
web.show_document(vc_url, '_blank');
END;Michael,
print out "vc_rep_job" to a message or alert to see if this contains a valid number. If this shows as a valid number try to manually type the access URL into a browser URL field. If this shows then you have a hidden character within your URL.
The PLSQL code looks okay.
Frank -
Error when running report from form
When i press on the button in form to run the report i get:
Microsoft Visual C++ Runtime library
Runtime Error!
Programm C:\Oracle\DB9iDS\bin\ifweb90.exe
abnormal program termination
What could be the problem?I just installed the new patch. But now OC4J won't start -i get "-jar: illegal argument":
C:\Program Files\Common Files\System\Mapi\1060\NT>C:\oracle\livo9iDS\jdk\bin\jav
a -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingle
tonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=C:\oracle\liv
o9iDS\j2ee\Oracle9iDS\config\jazn.xml -Doracle.home=C:\oracle\livo9iDS -DORACLE_
HOME=C:\oracle\livo9iDS -jar C:\oracle\livo9iDS\j2ee\home\oc4j.jar -userThreads
-config C:\oracle\livo9iDS\j2ee\Oracle9iDS\config\server.xml
-jar: illegal argument
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler -
Database connection error when running report from web application
Hi all,
When I open a report in Reports Builder , and enter the database connection parameters, everything works fine. When I run my web application from JDeveloper (9.0.5.1), and I tried to run a report, I get this error:
Rep-501 : Unable to connect to the specified database.
I have ran tnsping, and it works fine. My tnsnames.ora file looks like this :
GPGWL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = GPGWL)
)Please ask this question in Jdeveloper forum.
-
FRM-92101 error while running report from a button or menu
Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
ArifHello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif -
FRM-92101 error while running report from form
HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arifhi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN -
Error when run page from jdev10.1.3.3
Hi,
Im getting the following error when running pages from jdev 10.1.3.3. I have loaded all the frequired files from the server(.class and .xml).please help..
Thanks.
## Detail 0 ##
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at oracle.apps.fnd.framework.webui.OAPageContextImpl.putSessionValue(Unknown Source)
at oracle.apps.pos.supplier.webui.ByrAddCntctCO.processRequest(ByrAddCntctCO.java:97)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(Unknown Source)The OA Framework forum is available at the following URL:
OA Framework
Regards,
Didier. -
Query based Report (Reports From SQL Query)
Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
Can i increase a timeout of portal page, how i can do this?
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?Can you post the URL that is giving you the page not found error ? I am not sure if I can be of much help though.
In order to increase your chances to get a reply you should also post your question in the Portal Forum - Oracle Application Server Portal
Edited by: Rodolfo Ferrari on Jun 16, 2009 3:49 PM -
Need help in Report From SQL Query
Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
I tried also increase the page time out in httpd.conf, but no use.
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?user602513 wrote:
Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
I tried also increase the page time out in httpd.conf, but no use.
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?Do you get any errors or warnings or it is just the slow speed which is the issue?
There could be a variety of reasons for the delayed processing of this report. That includes parameter settings for that page, cache settings, network configurations, etc.
- explore best optimization for your query;
- evaluate portal for best performance configuration; you may follow this note (Doc ID: *438794.1* ) for ideas;
- third: for that particular page carrying that report, you can use caching wisely. browser cache is neither decent for large files, nor practical. instead, explore the page cache settings that portal provides.
- also look for various log files (application.log and apache logs) if you are getting any warnings reflecting on some kind of processing halt.
- and last but not the least: if you happen to bring up a portal report with more than 10000 rows for display then think about the usage of the report. Evaluate whether that report is good/useful for anything?
HTH
AMN -
Adding update and delete buttons to a Report from SQL Query
There is an option when creating a QBE to add update and delete
links which i find quite useful, but this option doesn't seem to
be possible on a Report from SQL Query. Do i need to do
something special to add them? is the option located in a
different place?Hi,
You can only add Update ,Delete in QBE Reports,
there is no option in Portal which can be used to
have these buttons in the Reports from Query Wizard or
Report from SQL Query.
Thanks
Vineet -
Width of field in Report From SQL Query
I have created a report from SQL query with 15 columns being selected. However, no matter what column width and column type (pixel, char, percent) I enter in the column formatting tab of the report, I cannot get the report to format the column to the width I desire. It is always a fixed width. Does anyone have any suggestions?
Thanks,
MartinHi,
Char (used for ASCII format)
Displays the output in the specified number of
characters per line. For example, if you enter 20
in Width, the report displays 20 characters of the
column data in each line. If the number of
characters per line exceeds the specified
number, the remaining characters are wrapped
to the next line.
Pixel
Displays the output in the specified number of
pixels per row. For example, if you enter 10 in
Width, the column data displays 10 pixels of
data per line of the displayed table.
Percent
Displays the output in the specified percentage
of the table. For example, if you enter 25 in
Width, the column data displays in 25% of the
displayed table.
Thanks,
Sharmila -
Report from SQL Query -Excel format only show the first page
Hi,
I have some Reports from SQL Query. In the display options, I choose Excel as default format. The Excel documents only show the first page. If I choose HTML as default format, it shows every rows.
Please advise on how to have a complete Excel document as HTML format does.
Thanks a lot.
Lina HanI beleive when you export Oracle reports to Excel it is the Data that is transferred along with Column Names.
You cannot export the variables defined on the report.
Hence you will not be able to export the Footer to excel. (Still looking into it will let you know if i find anything interesting)
Regards,
Bhushan Salgar -
Can Portal Report from SQL Query use where column IN (:bind_variable)
I would like to create a portal report from sql query with IN (:bind_variable) in the where clause. The idea is that the user would enter comma-separated or comma-quote-separated values for the bind_variable. I have tried this several ways but nothing seems to work. Can this be done?
TrentonHi,
Which version of portal are you using. This is a bug. It has been fixed in 30984.
Thanks,
Sharmila -
Report from sql query invalid date condition
Hi, I created a Reports From SQL Query. My sql is like
"select column1, column2
from myschema.tablename
where mydate > :p_date1 and mydate < :p_date2"
I am using portal with turkish and english option. If I pass p_date paramaters 'dd-MON-yyyy' format
(for example p_date1 = 23-MAR-2003 p_date2 = 26-APR-2003) in english mode portlet is return correct result,
in turkish mode 'No Row Returned'. I changed my sql statement with
"select column1, column2
from myschema.tablename
where to_date(mydate,'dd/mm/yyy') > to_date(:p_date1,'dd/mm/yyy') and to_date(mydate) < to_date(:p_date2,'dd/mm/yyyy')"
and I pass p_date parameters 'dd/mm/yyyy' format (for example p_date1 = 23/03/2003 p_date2 = 26/04/2003)
but now turkish and english mode No row returned.
How may I write correct sql statament. My database NLS_DATE_FORMAT=DD/MM/YYYY and NLS_LANGUAGE=TURKISH.
thanks.Hi,
Try this for turkish mode:
Case 1: the 'mydate' column has a kind of a char data type (like char, varchar or varchar2)
and a value like '30/03/2003'
"select column1, column2
from myschema.tablename
where
to_date(mydate,'DD/MM/YYYY') > :p_date1
and
to_date(mydate,'DD/MM/YYYY') < :p_date2"
Case 2: the mydate column has a date type:
"select column1, column2
from myschema.tablename
where
mydate > :p_date1
and
mydate < :p_date2"
In both cases use the following parameter values:
p_date1 = 23/03/2003
p_date2 = 26/04/2003
This should work
Thanks
Peter
Maybe you are looking for
-
Problem with the creation of a new user
Hi! II want to create new user in the database but i have this message: this entry already exists in the following tables (CUMI). This user doesn't exists and we haven't deleted users. When I am going to see in the table OUSR I have 19 users But when
-
How can I travel on a plane with my iMac 21''?
Traveling Delta from JFK, international flight. how can I bring my iMac along?
-
Syncing issues with Outlook when I add a contact to my iphone
I'm using the icloud to sync my calendar and contacts to my iphones and Outlook. Everything seems to be working perfect except one thing. When I add a contact to my phone it will not show up on my husbands phone or Outlook. I have checked my defaults
-
Short question about networking, Threads and web services..
Lets say I got 2 classes, Midlet A and Thread B. I created Thread B because web services (jsr-172) uses networking and It has to be done in a separate thread other then the Midlet A. So, in Thread B, I have the run(), where I do all my stuff, and som
-
Frustrating Snow Leopard Upgrade Causing 'connection timeout'
WIFI problem no connection due to a connection timeout everytime i try and connect to my home wifi network (wired ethernet ok no problem). There seems no way out from this. Apart from downgrading back to a usable Leopard installation which I have do