Getwa_not_assigned in program SAPLFKV0

Hello.
When executing a SAP program i get the following error. Can someone tell me which SAP notes to implement. The details of the dump are as follows.
GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLFKV0" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 124).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLFKV0" or "LSVIMFTX"
"SET_TXT_UPDATE_FLAG"
Information on where terminated
Termination occurred in the ABAP program "SAPLFKV0" - in "SET_TXT_UPDATE_FLAG".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 814
of the (Include) program "LSVIMFTX".
Source Code Extract
Line SourceCde
784 genkey = <textkey_x>
785 genkey_ln = x_header-textkeylen
786 TABLES
787 * inttab = mod_elem_tab
788 inttab = <texttab>
789 EXCEPTIONS
790 db_error = 12
791 not_found = 04
792 wrong_param = 08.
793 IF sy-subrc > 4. RAISE get_table_error. ENDIF.
794 * READ TABLE mod_elem_tab INDEX 1.
795 READ TABLE <texttab> INTO <table1_text> INDEX 1.
796 IF sy-subrc <> 0.
797 MOVE <text_initial> TO <table1_text>.
798 CLEAR sy-subrc.
799 * ELSE.
800 * <table1_text> = mod_elem_tab.
801 ENDIF.
802 ENDIF.
803 ENDFORM. " TABLE_READ_SINGLE_ENTRY
804
805 &----
806 *& Form SET_TXT_UPDATE_FLAG *
807 ----
808 * note, if texttab entry was modified on screen
809 ----
810 FORM set_txt_update_flag.
811
812 DATA: lb_als TYPE REF TO IF_EX_VIM_ALS_BADI.
813
>>>>> IF <textkey_x> EQ <initial_textkey_x> OR "textkey not filled yet OR
815 status-action EQ kopieren OR "copy mode OR
816 neuer EQ 'J' OR <xact> EQ leer OR "real new entry OR
817 ( temporal_delimitation_happened EQ 'X' AND "temporal delimitation
818 x_header-delmdtflag EQ 'B' ).
819 PERFORM fill_texttab_key_uc USING <table1> <table1_text>."#EC ..
820 ENDIF.
821 IF status-action EQ hinzufuegen.
822 <status>-upd_flag = 'X'. "always both tables must be added
823 ELSE.
824 TRANSLATE <status>-upd_flag USING ' TEX'.
825 ENDIF.
826
827 CALL METHOD cl_exithandler=>get_instance
828 EXPORTING
829 null_instance_accepted = seex_false
830 exit_name = 'VIM_ALS_BADI'
831 CHANGING
832 instance = lb_als
833 EXCEPTIONS
Thanks
Audrey.

Similar Messages

Problem in migration of Territory Attributes - dump : GETWA_NOT_ASSIGNED

Hi,
I am trying to migrate CRM Territory attributes using rule builder. But, I am getting run time error saying 'GETWA_NOT_ASSIGNED.
Program : CRM_TERRMAN_DATA_MIGRATION
Termination occurred in the ABAP program "CRM_TERRMAN_DATA_MIGRATION" - in
"EXECUTE_DM".
Code Extract:
777 LOOP AT lt_data_mig_output_all ASSIGNING <fs_data_mig_output_all> .
778 READ TABLE lt_terr_rule_dm ASSIGNING <fs_terr_rule_dm>
779 WITH KEY terr_id = <fs_data_mig_output_all>-terr_id .
780 IF <fs_data_mig_output_all>-success = '3'. "green
781 <fs_terr_rule_dm>-status = '@08@'.
782 ELSE.
783 <fs_terr_rule_dm>-status = '@0A@'. "red.
784 ENDIF.
>>>>> MODIFY lt_terr_rule_dm INDEX sy-tabix
786 FROM <fs_terr_rule_dm> TRANSPORTING status .
787 ENDLOOP.
Can you please let me know, how can I solve my issue.
Thanks,
Sandeep

Hi Sandeep,
Can you please check what's the value in lt_terr_rule_dm, sy-tabix and <fs_terr_rule_dm> in debug mode?
If possible, can you please attach the debuggin screen?
Or, please report an SAP Customer Message, because it seems to be a standard coding problem.
Best regards,
Maggie

Dump GETWA_NOT_ASSIGNED in ALV OO

Hi experts, i have a problem ... i created an ALV OO but when i wanna dowload the ALV's lines the program trigger a DUMP: GETWA_NOT_ASSIGNED in program SAPLKKBL ... i know that it's a clasic DUMP about ALV's ... please i need your help.
Thanks.
David Carballido

Hi Uwe ... i created a structure and called to FM LVC_FIELDCATALOG_MERGE to create my fieldcat and the program trigger the same DUMP.
Errores tiempo ejecucióGETWA_NOT_ASSIGNED
 ocurrido el 23.09.2008 a 17:10:54
>> Dump breve ABAP no almacenado completamente (muy grande)
Field symbol has not yet been assigned.
¿Qué ha sucedido?
The current ABAP/4 program "SAPLKKBL " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
¿Qué puede hacer?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Análisis error
You attempted to access an unassigned field symbol
(data segment 1069).
This error occurs:
- if you address a typed field symbol before it has been set with
ASSIGN or
- if you address a field symbol that has been reset with UNASSIGN
or pointed to a local field that no longer exists, or
- if you address a field symbol that pointed to a line of an internal
table that has now been deleted, or
- if you address a global function interface partameter, even
though the relevant function module is not active,
i.e. it is not in the list of active calls. You can get the list
of active calls from the this short dump.
Notas para corregir errores
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"GETWA_NOT_ASSIGNED"
"SAPLKKBL " or "LKKBLF99 "
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
Usuario, transacción....
Client.............. 200
User................ "BCDCARBALLID"
Language key........ "S"
Transaction......... "SEU_INT "
Program............. "SAPLKKBL "
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Info posición de cancelación
The termination occurred in the ABAP/4 program "SAPLKKBL " in
"GEN_FIELD_OUT2".
The main program was "ZFI_RPT_PDB_005 ".
The termination occurred in line 3824
of the source code of program "LKKBLF99 " (when calling the editor 38240).
Detalle código fuente
037940 * Color settings "K_COLCOLOR
037950 if gs_out_flags-sum is initial.
037960 if gs_fc-hotspot = 'X' and gs_out_flags-hotline is initial
037970 and gt_stack-is_layout-no_hotspot is initial.
037980 format hotspot on.
037990 elseif gs_fc-hotspot = 'V'
038000 and gs_out_flags-hotline is initial and not <field> is initial
038010 and gt_stack-is_layout-no_hotspot is initial.
038020 format hotspot on.
038030 endif.
038040 if gs_fc-input = 'X' and
038050 gt_stack-is_layout-no_input is initial and
038060 gs_fc-checkbox is initial.
038070 format input on.
038080 format intensified off.
038090 endif.
038100 if not gs_fc-emphasize is initial and gs_out-info is initial.
038110 perform field_color_normal using gs_fc
038120 * gt_stack-is_layout
038130 gs_out-info.
038140 endif.
038150
038160 * complex logic with internal table for color description
038170 if gs_out_flags-mcoltab = 'X' and gs_out_flags-slave ne 'X' and
038180 gs_out_flags-sum ne 'X'.
038190
038200 perform field_color_complex using <coltab>
038210 gs_fc
038220 gs_out_flags-inverse.
038230 elseif gs_out_flags-scoltab = 'X' and gs_out_flags-slave = 'X' and
-----> gs_out_flags-sum ne 'X'.
038250
038260 * perform field_color_complex using <coltab> " DEL FGS_COLOR
038270 perform field_color_complex using <coltab_slave> " INS FGS_COLOR
038280 gs_fc
038290 gs_out_flags-inverse.
038300 endif.
038310 endif.
038320
038330 *--- Prüfung Ausgabelänge
038340 clear gs_out-hlplen.
038350 * Edit-Mask
038360 if gs_fc-tech_form = 7.
038370 write <field> to gs_out-hlpchar
038380 using edit mask gs_fc-edit_mask.
038390 gs_out-hlplen = strlen( gs_out-hlpchar ).
038400 * Bei NUMC führende '0' und ' ' nicht berücksichtigen
038410 elseif gs_fc-tech_form = 6.
038420 write <field> to gs_out-hlpchar no-zero left-justified.
038430 if gs_fc-just = 'R'.

Run time error in FMBB after execution of RGZZGLUX GETWA_NOT_ASSIGNED FM

Hello Experts,
We have activated funds management in Development it is working fine without any issues. Transported same changes to Quality system and executed Program RGZZGLUX.
Issue: Run time error in FMBB transaction code even after execution of program RGZZGLUX. similar error in funds center group also.
Category               ABAP Programming Error
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program           SAPLFMBD_DATABASE_ACCESS
Application Component PSM-FM-BCS-BU
Date and Time          10.06.2014 13:28:36
Short text
    Field symbol has not yet been assigned.
Requirement: Please let us know how to solve this issue
we have checked note:0000939958 - and changed Inactive status for tables FMIT, FMIP and FMIA, but no use, when we run program RGZZGLUX, it has deactivated this tables again.
Regards,
Chalapathi

Hello Shyam / Javed,
Thank you for your inputs.
I have solved issue, now it is working fine.
Activated EA-PS and included into transport request. executed program RGZZGLUX.
Note used to solve issue :0000908007
Regards,
Chalapathi

BAPI for Scheduling Agreement Scales

Hello,
I want to add Scales to my Scheduling Agreement.
Tried using BAPI_SAG_CREATE, I was able to successfully create a Scheduling Agreement but it says that "No scales exist". According to the FM documentation, scales are not supported during the creation of outline agreements.
Tried using BAPI_SAG_CHANGE using the Scheduling Agreement created but I always get a dump and points me to a standard code.
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program         SAPLMEOUT
Include                      LMEOUTP14
Row                          1,454
Module type              (METHOD)
Module Name           POST
If these BAPI will not work, my last option would be BDC.
Thanks in advance.

first see the documentations.
Regards
Peram

Queries on infoset throwing short dump

hello all,
We have some queries based on infoset. These queries are throwing dump
Dump info
Category               ABAP Programming Error
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program           SAPLRSQ_ISET_RUNTIME
Application Component BW-BEX
i found following
Infoset status - active.
Queries status - active
Queries executing till Selection screen
Infoset - data loaded
Pls help to fix this issue
Thanks

Hi,
Run your Query in RSRT in debug mode( Select SQL Query ). Try to analyze where it's getting failed. You can even analyze the dump in ST22.
Check the definition of your Infoset joins.
Regards,
Suman

Managed System Dump Error

Dear All,
I am in the configuration phase of SOLMAN 7.1 SP3 of MANAGED SYSTEM.
SELECT SYSTEM FOR CONFIGURATION
CONNECT SYSTEM(ABAP ONLY)
As i have completed the 3 steps while i am going to 4th step as ENTER SYSTEM PARAMETERS I am getting error as:
Error while processing your query
What has happened?
The URL call http://HOSTNAME.FQDN:8000/sap/bc/webdynpro/sap/wd_sise_wizard_app was terminated because of an error.
Note
The following error occurred in system KSA : Field symbol has not yet been assigned.
The error occurred on application serverHOSTNAME_KSA_00 and in work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: LOOKUP_DB of program CL_DIAGSTP_MNGD_DB============CP
Method: HANDLEDEFAULT of program /1BCWDY/09IUTRFAZ9T6743IXW99==CP
Method: HANDLEDEFAULT of program /1BCWDY/09IUTRFAZ9T6743IXW99==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/09IUTRFAZ9T6743IXW99==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system KSA in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server HOSTNAME_KSA_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server.HOSTNAME_KSA_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 100 -u: SOLMAN_ADMIN -l: E -s: KSA -i: HOSTNAME_KSA_00 -w: 7 -d: 20111201 -t: 163843 -v: RABAX_STATE -e: GETWA_NOT_ASSIGNED -X: 001FC6C2163B1ED187817AD34F7C230D_001FC6C2163B1ED187817AD34A9A230D_1 -x: D60B1CE17B9AF1E7830D001FC6C2163B
HTTP 500 - Internal Server Error
The dump error i got in ST22,the log is as follows:
Category               ABAP Programming Error
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program           CL_DIAGSTP_MNGD_DB============CP
Application Component SV-SMG-DIA
What happened?                                                                                |
|    Error in the ABAP Application Program                                                         |
|                                                                                |
|    The current ABAP program "CL_DIAGSTP_MNGD_DB============CP" had to be                         |
|     terminated because it has                                                                    |
|    come across a statement that unfortunately cannot be executed.
Thanks & Regards
Ajitabh

Hey Chang,
Thanks for your help.
Although we are on patch level ST-PI 0004 and ST 0003 still we are facing this error.
Please guide me how to resolve this as the note you have suggested has correction instructions.
How to apply this note to have the corrections without changing the source code manually.
Thanks for your help in advance!
Thanks & Regards
Ajitabh

Availability of BOBX

Hello,
We are planning to use transaction BOBX and have checked the BOPF Feature availability matrix.
However, the transaction is not available on our "EHP6 FOR SAP ERP 6.0" system (SAP_BS_FND 731 SP 0007,SAP_BASIS/SAP_ABA 731 sp 0010)
Am I misunderstanding the Feature Availability Matrix?
On our HANA system it runs into a runtime error: "EHP7 voor SAP ERP 6.0" (SAP_BS_FND 747 SP 0003)
GETWA_NOT_ASSIGNED in program /BOBF/CL_CONF_UI_VIEW_MODIFIERCP
Programma                               /BOBF/CL_CONF_UI_VIEW_MODIFIERCP
Include                                 /BOBF/CL_CONF_UI_VIEW_MODIFIERCM00G
Regel                                   12
Moduletype                              (METHOD)
Modulenaam                              TREE_ELEMENTS_STATIC
Thanks in advance for your advice and help
Ben Meijs

Hi Indranil,
Thanks for your quick response.
This is the solution for the problem that trx BOBX doesn't exist. Have implemented it on the ENH6 system,
It seems we needed SAP_BS_FND 731 Support Package 11 and we are 'still' on SP7.
Regards,
Ben Meijs

Error in Automatic Payment Program : ABAP/4 processor : GETWA_NOT_ASSIGNED

Hi SAP gurus,
I'm currently implementing automatic payment using DME to generate a text file, in a format that is specified by HSBC.
I read some articles about this topic and I have done these steps:
I created DME Format Tree (just a demo format tree).
I created a new Payment Media Format
Set up Payment Method and Assigned Payment Media Format.
But finally it didn't work.
After I run F110, the posting was okay but no Data Media File was created. The end of Job Log Entry look like below:
"Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000001977, user ID DANGNH)
ABAP/4 processor : GETWA_NOT_ASSIGNED
Job cancelled"
I don't understand why it won't work. Does anyone here have any suggestion for this problem.
Thanks and regards.
HaiDang.
Edited by: Maxielight on Jun 28, 2010 2:14 PM

Dear Madhu,
I have followed your suggestion but It didn't work. I used transaction SE38 to run RGZZGLUX as yousuggested.
I used ST12 to analyse runtime errors and the analysis information look like below:
Short text
      Field symbol has not yet been assigned
What happend?
      Error in the ABAP Application Program.
      The current ABAP program "SAPLDMEE2_ABA" had to be terminated because it has come across a statement
      that unfortunately cannot be executed.
Error Analysis
      You attempted to access an unassigned field symbol (Data Segment 8)
Any suggestion?
Maxielight.

GETWA_NOT_ASSIGNED dump error in program SAPLSLVC

Hi,
    I am using REUSE_ALV_GRID_DISPLAY FM to print ALV report and getting GETWA_NOT_ASSIGNED dump error in program SAPLSLVC.
I check the SAP Note for this error.. no luck..
Any one face similar issue.
Cheers
Senthil

Hi,
    Here is my source code.
Layout
it_layout-no_input          = 'X'.
it_layout-colwidth_optimize = 'X'.
it_layout-zebra = 'X'.
it_layout-get_selinfos = 'X'.
it_layout-box_fieldname = 'SEL'.
it_layout-detail_initial_lines = 'X'.
it_layout-detail_titlebar = 'Details'.
ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_pf_status_set = y_pfstatus
            i_callback_program      = y_repid
           i_callback_user_command = 'USER_COMMAND'
            i_grid_title           = y_outtext
            is_layout               = it_layout
            it_fieldcat             = it_fieldcat[]
            i_save                  = 'X'
       TABLES
            t_outtab                = it_out
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
I am still getting dump error.
Any parameter missing..!
Thanks
Senthil

Dump GETWA_NOT_ASSIGNED in BBPCF02 - program SAPLGCNV

Hi,
it's some days that users can't post goods issues in SRM because the system give them the following dump.
Can anyone help me to understand? What can I check?
Err. run-time GETWA_NOT_ASSIGNED
Data e ora 16.07.2007 16:17
Tsto br. Field symbol has not yet been assigned.
 Causa dell'errore
Error in ABAP application program.
The current ABAP program "SAPLGCNV" had to be terminated because one of the
 statements could not be executed.
This is probably due to an error in the ABAP program.
Possibili soluzioni
Print out the error message (using the "Print" function)
 and make a note of the actions and input that caused the
 error.
To resolve the problem, contact your SAP system administrator.
 You can use transaction ST22 (ABAP Dump Analysis) to view and administer
 termination messages, especially those beyond their normal deletion
 date.
is especially useful if you want to keep a particular message.
Analisi errori
You attempted to access an unassigned field symbol
 (data segment 32771).
This error may occur for any of the following reasons:
 - You address a typed field symbol before it is set using ASSIGN
 - You address a field symbol that points to a line in an internal table
 that has been deleted
 - You address a field symbol that had previously been reset using
 UNASSIGN, or that pointed to a local field that no longer exists
 - You address a global function interface parameter, even
 though the relevant function module is not active,
 that is it is not in the list of active calls. You can get the list
 of active calls from the this short dump.
"GETWA_NOT_ASSIGNED" C
"SAPLGCNV" or "LGCNV$02"
"G_CONVERT_OUTPUT"
Utente e transazione
 Client................ 100
 User.................. "DONEGAI"
 Language key....... ..."I"
 Transaction............"BBPCF02 "
 Program............... "SAPLGCNV"
 Screen.............. .."SAPLBBP_PDH_CUF 0100"
 Row in Screen..........6

Hi
Please take help of ABAP Person here. Please confirm whether there are any custom fileds added to the Standard functionality in this case.
Using SE11, select the radio button Data type both in the SRM and R/3 systems, and type the name CI_BBP_HDR_PO and then check whether this structure exists or not.
Some related SAP OSS Notes to check ->
Note 940242 - ECS: Enhancement fields not transferred to back end
Note 874905 - Transferring customer fields in extended classic scenario
Do let me know.
Regards
- Atul

Runtime Error -GETWA_NOT_ASSIGNED when running COI

Hi ALL,
We are getting run time error - GETWA_NOT_ASSIGNED when running COI tasks.
Error analysis
 You attempted to access an unassigned field symbol
 (data segment 32995).
 This error may occur for any of the following reasons:
 - You address a typed field symbol before it is set using ASSIGN
 - You address a field symbol that points to a line in an internal table
 that has been deleted
 - You address a field symbol that had previously been reset using
 UNASSIGN, or that pointed to a local field that no longer exists
 - You address a global function interface parameter, even
 though the relevant function module is not active,
 that is it is not in the list of active calls. You can get the list
 of active calls from the this short dump.
How to correct the error
 You may able to find an interim solution to the problem
 in the SAP note system. If you have access to the note system yourself,
 use the following search criteria:
 "GETWA_NOT_ASSIGNED" C
 "CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
 "REDUCE_GOODWILL_ENTRIES"
 If you cannot solve the problem yourself and you wish to send
 an error message to SAP, include the following documents:
 1. A printout of the problem description (short dump)
 To obtain this, select in the current display "System->List->
 Save->Local File (unconverted)".
2. A suitable printout of the system log
 To obtain this, call the system log through transaction SM21.
 Limit the time interval to 10 minutes before and 5 minutes
 after the short dump. In the display, then select the function
 "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, select the Editor function "Further Utilities->
 Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
Information on where terminated
 The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
 in "REDUCE_GOODWILL_ENTRIES".
 The main program was "UCUWB000 ".
 The termination occurred in line 722 of the source code of the (Include)
 program "CL_UC_COI_ACT_PT==============CM00P"
 of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
 calling the editor 7220).
702 call method do_inv_net_change->create_data_reference
703 exporting
704 i_type = cl_uc_coi_inv_net=>gc_ref_pt_block
705 io_model = do_model
706 importing
707 er_data = lr_t_data.
708 assign lr_t_data->* to <lt_share_block>.
709 call method do_inv_net_change->get_block
710 importing
711 et_pt_shares = <lt_share_block>.
712
713 create data lr_s_data like line of <lt_share_block>.
714 assign lr_s_data->* to <ls_share_block>.
715 * change due to selling invor's transaction
716 read table <lt_share_block> into <ls_share_block> index 1.
717
718 * direct shares prior to divestiture
719 assign component 'R_TH_DSH_OLD'
720 of structure <ls_share_block> to <lr_th_dsh_old>.
721 assign <lr_th_dsh_old>->* to <lt_dsh_old>.
>>>> create data lr_s_data like line of <lt_dsh_old>.
723 assign lr_s_data->* to <ls_dsh_old>.
724 assign component ucf6_cs_coi_fld-pcnt1
725 of structure <ls_dsh_old> to <pcnt1_7a>.
726
727 * change of direct shares in divestiture
Please provide your suggestions.
Edited by: VM2727 on Feb 10, 2012 3:27 AM

Or even these ones:
SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
Symptom
When you execute the consolidation of investments, a program termination
occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
class CL_UC_COI_ACT).
Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
Symptom
When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD.

GETWA_NOT_ASSIGNED in RMVKON00 (background job)

Hello everyone
We're having the following recurring problem:
There's a job running the first of every month, it uses an ALV GRID with this statement: REUSE_ALV_GRID_DISPLAY.
When it's run normally (not scheduled) it works perfectly, but when it is scheduled we get a GETWA_NOT_ASSIGNED shortdump.
We have adjusted RMVKON00 (to ZRMVKON00) to add 2 columns to the ALV display by following the strategy of creating a work area and adding it to the ALV's internal table structure.
Function call Code
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_buffer_active = space
 i_callback_program = c_repid
 i_callback_pf_status_set = c_pf_status_set
 i_callback_user_command = c_user_command
 i_structure_name = 'I_TAB'
 it_fieldcat = tab_fieldcat[]
 it_sort = tab_sort[]
 is_layout = s_layout
 i_save = c_save
 is_variant = s_variant
 it_events = tab_events[]
 TABLES
 t_outtab = i_tab.
I_TAB setup
TYPES: BEGIN OF watype,
 mandt LIKE rkwa-mandt,
 mblnr LIKE rkwa-mblnr,
 mjahr LIKE rkwa-mjahr,
 zeile LIKE rkwa-zeile,
 status LIKE rkwa-status,
 bldat LIKE rkwa-bldat,
 budat LIKE rkwa-budat,
 bukrs LIKE rkwa-bukrs,
 sobkz LIKE rkwa-sobkz,
 lifnr LIKE rkwa-lifnr,
 werks LIKE rkwa-werks,
 matnr LIKE rkwa-matnr,
 shkzg LIKE rkwa-shkzg,
 gsber LIKE rkwa-gsber,
 bwaer LIKE rkwa-bwaer,
 wrbtr LIKE rkwa-wrbtr,
 bstme LIKE rkwa-bstme,
 bstmg LIKE rkwa-bstmg,
 hkont LIKE rkwa-hkont,
 mwskz LIKE rkwa-mwskz,
 belnr LIKE rkwa-belnr,
 gjahr LIKE rkwa-gjahr,
 buzei LIKE rkwa-buzei,
 navnw LIKE rkwa-navnw,
 prctr LIKE rkwa-prctr,
 text LIKE zconalv-text,
 name1 LIKE lfa1-name1,
 maktx LIKE makt-maktx,
 END OF watype.
DATA: alv_itab TYPE watype.
I_TAB fill in FORM alv_list
Fill itab with current rkwa table, and add corresponding
Vendor name & Material Desc.
DATA: i_tab TYPE TABLE OF watype,
 i_tabRow TYPE watype.
LOOP AT t_alv_list.
MOVE-CORRESPONDING t_alv_list TO i_tabRow.
SELECT SINGLE name1 INTO i_tabRow-name1
FROM LFA1
WHERE lifnr = t_alv_list-lifnr.
SELECT SINGLE maktx INTO i_tabRow-maktx
FROM MAKT
WHERE matnr = t_alv_list-matnr.
INSERT i_tabRow INTO TABLE i_tab.
This is an extract of the shortdump:
Transaction......... " "
Program............. "SAPLKKBL "
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLKKBL " in
"CHECKBOX_OUT".
The main program was "ZRMVKON00 ".
The termination occurred in line 1148
of the source code of program "LKKBLF01 " (when calling the editor 11480).
The program "SAPLKKBL " was started as a background job.
Any help is much appreciated.
Edit: shortdump extract added
Message was edited by: Tim Schraepen

I have found the thing that was causing the error!
If you look at the short dump it says something about program LKKBLF01 on line 1148.
I went to take a look at that line.
 if not r_sum is initial or <box> = '-'.
That <box> statement got me thinking that the layout could be the cause, so I commented out the layout parameter line like this:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_buffer_active = space
 i_callback_program = c_repid
 i_callback_pf_status_set = c_pf_status_set
 i_callback_user_command = c_user_command
 i_structure_name = 'ZRKWA'
 i_structure_name = 'T_ALV_LIST'
 it_fieldcat = tab_fieldcat[]
 it_sort = tab_sort[]
* is_layout = s_layout i_save = c_save
 is_variant = s_variant
 it_events = tab_events[]
 TABLES
 t_outtab = i_tab.
 t_outtab = t_alv_list.
And it worked!
Here's an important note I found in the documentation about that parameter:
Interaction
box_fieldname
Value range: SPACE, field name of the internal output table
If the list should have checkboxes at the beginning of each list row (to allow the user to select multiple rows at once), you must fill this parameter with the field name of the internal output table that represents the selection column for selecting rows with the help of checkboxes.
The field is always displayed as a checkbox at the beginning of each list row without a list heading.
I don't know why this has something to do with it, but my problem is solved. I will look into it further and update when I've found a better solution.
Thank you for all your help Christian.
I really appreciate it.

Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0

Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT 0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
Balaraj

Thanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
" READ TABLE p_t_mapping ASSIGNING <fs_map>
 WITH KEY target_stepid = 0
 targetsegid = <fs_posit>-rulesegid
 targetposit = <fs_posit>-ruleposit
 targetid = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj

GETWA_NOT_ASSIGNED error while running abap prog in process chain

Hi.
I am getting a runtime error GETWA_NOT_ASSIGNED while running an ABAP program in process chain.
But when i execute pro in SE38 , it's not giving any error.
Please any one can suggets what will be error.

Hi,
i also used to get error for a program executed through process chain but when it is executed in se38 it used to work... that is because my program try to access a application server folder and reads the file from there... the authorisation to this is not proper through process chain ..... once authorisation to the folder was given properly .. i am able to run...
Such things can happen in your case also... Try to analyse the dump in st22.... what happened ...
Regards
vamsi

Getwa_not_assigned in program SAPLFKV0

Similar Messages

Maybe you are looking for