Gl account cannot be used when creating Purchase requisition

Dear Experts,
I have the following error message while creating PR :
G/L account xxxxx cannot be used (please correct)
Diagnosis
Comparison of the field selection strings from the G/L account xxxx and the account assignment category W reveals that there is an incompatible combination of field selections for the field selection group 'Business area'.
I have checked through FS00, the account xxx is a PL statement account and the field status group is Z002.
How to correct this error?
Where is mapping between GL account and account assignment category in PR?
Please advice.
Thank you.

Hi Srinivas,
Thanks for the answer,
I have mitmatch between OME9 and FSG in OBC4 but still facing error : "Comparison of the field selection strings from the G/L account xxxx and the account assignment category W reveals that there is an incompatible combination of field selections for the field selection group 'Commitment item'.
The 'commitment item' between OME9 and OBC4 is the same (optional entry).Kindly advice.
Thanks.

Similar Messages

  • Error Message when creating Purchase Requisition

    Hello,
    We are on SRM 4 version in classic scenario.
    We are creating a limit shopping but when he has been approved we got an error from the backend system :
    Shopping Cart XXXXX3 (Purch. Requisition XXXXX): ME020 Item category X not allowed with document type XX
    the same user has already created a shopping cart on limit with no problem but not on the same plant/cost center/gl account...
    Do  you have an idea of the error message solution?
    Thanks!

    Hello,
    Check the following settings in ECC system.
    1) IMG -> Materials Management -> Purchasing -> Purchase Requisition ->     
    Define Document Types                                                       
    Select "EC", (or those related with BBP), then double click on              
    "Allowed Item Categories".                                                                               
    2) IMG -> Materials Management -> Purchasing -> Purchase Order ->           
    Define Document Types                                                       
    Select "EC", (or those related with BBP), then double click on              
    "Allowed Item Categories".                                                  
    Also, check if note 140846 is applied.
    Kind regards,
    Ricardo

  • Reg: Error G/L account cannot be used !

    Hi ,
      I have an issue with one of the Purchase orders which though got generated from the EB system did not get transferred to the backend system due to some errors.
    The backend application error for the PO is : G/L account X1 cannot be used
    G/L account X2 cannot be used. & PO contains errors.
    I have debugged the transfer function module of this Purchase order and find that the I get this error message from the BAPI return parameters.
    The message number in the backend system is from message class ME 045 -"G/L accout cannot be used".
    I have checked and found that this message comes from a form FELDAUSWAHL_FEHLER. Now the perform is called in the program LMEXFU02.
    A sample code of the same which will call the perform is enclosed for your reference.
    CHECK COUNT GE 9.  "Materialnummer (Stelle 9) bewußt mit reingenommen
        UNPACK COUNT TO MODIF.
        IF  L1 = '+'
        AND L2 = '-'.
          TMODP-MODIF = MODIF.
          PERFORM FELDAUSWAHL_FEHLER.
        ENDIF.
        IF  L1 = '-'
        AND L2 = '+'.
          TMODP-MODIF = MODIF.
      PERFORM FELDAUSWAHL_FEHLER.      "nicht mehr ab 4.0B TK  89897
        ENDIF.
       CHECK COUNT NE 20.                 "Finanzposition      "173298
       CHECK COUNT NE 49.                 "Finanzstelle        "173298
       CHECK COUNT NE 50.                 "Geldgeber           "173298
        IF  L1 = '.'                       "ab Release 2.1
        AND L2 = '-'.
          TMODP-MODIF = MODIF.
          perform check_t162x using tmodp-modif.  "4.6A TK
          if sy-subrc eq 0.                "4.6A TK
            PERFORM FELDAUSWAHL_FEHLER.
          endif.                           "4.6A TK
        ENDIF.
        IF  L1 = '.' OR
            L1 = SPACE.
          L3 = L2.
        ELSE.
          L3 = L1.
        ENDIF.
      ENDDO.
    Now can any one tell me why does this perform get triggered. What is the relevance of L1 & L2. i.e which fields it validates etc and why do I receive any error that the G/L account cannot be used when the they are maintained for the company.
    Awaiting yor expert comments.
    With Regards,
    Rajesh

    Hi
    We have faced the similar issue earlier.
    We raised the issue with SAP long back, but no reply yet.
    We can avoid this by either trying to suppress the error message either in SRM or R/3 for the particular GL Account.
    <u>Meanwhile, look at the following SAP OSS Notes, which talks about the same issue, but are quite old (might not be applicable to you ) -></u>
    <u>Anyways, please cross-check</u>
    Note 95545 ME21 w.new accnt assigmnt category:error mess.ME045
    89897 ME21 EME045 G/L account cannot be used
    78322 ME21, ME51: Field selection G/L acct. (position 1-8)
    82258 PO with accnt assgnmnt: functional area w.req.entry
    Note 731791 - Source determination: Test report for checking
    Will update you soon on this.
    Regards
    - Atul

  • Creating Purchase Requisitions from within PS (ie from network)

    When creating purchase requisitions from within Projects Systems (ie activating them from a network) is there a "standard" way to put a cost center on the Purchase Requisition?  Currently no cost center is put on the account assignment.  We are looking at doing a custom field on the network header to hold the cost center and then a user exit to take this cost center and put it on the purchase requisition (and reservations) but before we go to all this trouble thought maybe I should check to see if I am missing something obvious?  Is there a more straight-forward way to accomplish this?  We know that we cannot edit the account assignment in ME52N becuase the PR originates from the network and therefore can only be changed from the network.
    Any input welcome.  Thanks.

    Dear Laura,
    When you will create Purchase Requistion through Network, system automatically takes account assignment category as "N" i.e Network. This you can not change in ME52N transaction.
    So this is a standard practise for generating Purchase Requistion through Network in PS Module.
    As you said putting Cost Center in Network Header as a Account Assignment Category which will go up to PO creation by using some User Exit which will not be possible in PS Module as per my knowledge is concern.
    But you want to keep Cost Center as as a Account Assignement Category you need to create manual Purchase Requisition through ME51N transaction.
    Hoping this will be useful to you.
    Regards,
    Sandeep

  • When I want to organise my bookmarks most of the options are greyed out and cannot be used including create new folder! Help

    '''''''''bold text'''''''''
    When i want to organise my bookmarks most of the options on the organise bookmarks menu are greyed out and cannot be used - including create new folder etc. Help please.

    Make sure you are not in the Private Browsing Mode:
    File > Private Browsing is UNCHECKED.

  • Error when creating purchasing group.

    Hi,
         i am facing two issue when creating purchasing group. i never had such a situation before.
    i have created two p.groups successfully and moved to quality.later i figured one of them is missing USER ID now when i try to enter user ID in user column getting below mention error.
    Entry XXXX Does not exist in USR02-check your entry.message no 00058.i have checked in USR02 None of ID's exist i used in newly created groups.but ID i used in other groups has no issue even doesn't  exist in USR02,but it shows value US in OB(Object type filed).
    both ID's are not being created in Development in other words SAP ID's with SU01 but we never had such issue before while changing or creating now purchasing group.
    Another thing i have noticed that OB(Object type field is missing in Dev.) i can see that field in Quality even in sand box but not visible in Dev.that when i use OME4.but when i use SM30-V_024 i can see the OB field.Somehow OB field is hidden when going through SPRO or ME04.
    This is about Sap ver.4.7
    Suggestion are much appreciated.

    Hi,
    Before creating new purchasing groups- 1st check your user ID is authorized to purchasing groups create in t.code: OME4.
    In development system you can creates new purchasing groups with USER ID and telephone numbers, upon saving system will create a transport request. Later you can transfer related transport request to quality system for your testing.
    For example: You can creates new purchasing groups with USER ID and telephone numbers
    Purchasing groups-------------USER ID ---------------Telephone numbers
    Z01-----------------------------------USR01------------------232569875
    Z02-----------------------------------USR02------------------232589876
    Regards,
    Biju K

  • Cannot select name when creating new DC

    Hi all,
    It seems I encounter this kind of problems over and over again when dealing with NWDI )-:
    In this thread Cannot select vendor when creating new DC I couldn't select vendor.
    I installed a new NWDI system (version is 7.18), did all the post installation steps including the configuration of a name server on the SLD but I cannot select "name" and the vendor I entered is not shown (even if enter it manually I cannot select name so it doesn't help - see snapshot).
    [snapshot|http://img134.imageshack.us/i/nwdi.jpg/]
    Snapshot: http://img134.imageshack.us/i/nwdi.jpg/
    I did name server config on : http://server:port/dtr/system-tools/administration/NameServerConfiguration
    Name prefixes are defined under 'Name Reservation -> Development Component Name' - I used <x.y>/* and <x.y>/tst (x.y is namespace like com.omri).
    I updated CMS after setting the name server, restart J2EE and did all kind of voodoo without success.
    I use local SLD which is part of the J2EE.
    I don't get any error messages (from NWDI/SLD/NWDS).
    I don't remember this kind of problem with NWDI on 6.40 versions.
    Moreover I installed and configured several systems on 7.12 & 7.13 versions without any problems but with 7.14 & 7.18 I've problem with setting the name server...
    Please help,
    Thanks,
    Omri

    Solved it on my own by deleting and creating the track again (with the same settings!!!)

  • Icloud account cannot be used to unlock this iphone

    Hi I previously managed to set-up my iphone then lock it out by entering my passcode incorrectly too many times.  In the end I have to restore the phone via itunes (which took 3 hrs)!.
    I'm now trying to reset-up the phone, when I turned it on it remembered the previous icloud account the phone had been set-up with however it would not accept the password.  Its now saying this icloud account cannot be used to unlock this iphone.
    When i log into the same icloud account on the PC, the password works, however the find my iphone doesn't show this iphone as being connected.
    Any ideas on who I can get this iphone working again.
    Thanks Sadie

    You cannot Bypass the iPhone Activation Process.
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store

    I bought student mac air through university account, Iworks were included when I purchased mac air. But there are no iworks and It's not free when I tried to download from App Store. OS was OS X Mountain Lion 10.9 When I received it. Is it because of OS? I upgraded to OS X Mavericks right after I got it.

    Today, I went to the mac store and asked the staff about above issue. Apple obviously sent me a mac air which was manufactured before October 2013 and therefore, iworks and OX Mavericks weren't installed. I have refund for around £45 to purchase iworks. However, I wasn't happy with what Apple actually did. I asked for replacement and refund the one I got and getting the new one from store so I can use mac straight away. however, the refund takes 5-7 working days. The staff on the phone told me if I have enough money I can just buy the new one in the store and get refund later. So I gave up! I was so disappointed with Apple. Even though I use the mac now, this was not the one Apple promised when I purchased online. if anyone would like to buy a mac, Please go to the actual store. DO NOT buy a mac through MAC ONLINE STORE!!! I strongly recommend! I feel like I wasted my time because the company doesn't keep its promise.

  • Workflow issue when create Purchase Order automaticlly based on Sales Order

    dear experts,
    I got a problem when create purchase order automatically once the Sales Order created, the field ERNAE of the Purchase Order creatd is WF-BATCH, but we want this field to be the user log in the system, like John. Smith
    it seems this is a configuration issue, but i am not familar with workflow, do you experts have any solutions?
    thank you in advance.
    Hongtao

    thank you for you reply my friend.
    yes, i mean the PO creator.
    I just create a SO in VA01, then change the Schedule line category from CN to CP, then SAVE, then Confirm the Delivery Proposal. after all this, the PO will be created automatically by Workflow. Because when I display the PO via ME23N, it displays [Standard PO XXXXX  created by Workflow-System] on the top of the screen.
    But i do not know which workflow is trigered to create the PO. and i tried SWEL like you said, there is no record listed.
    do you have any other suggestions? thank you so much, friend.

  • This youtube account cannot be used with apple tv

    I cannot view youtube on my apple tv.  It worked a couple of weeks ago but now does not.  I tried to log into youtube on apple tv and get the message that "this youtube account cannot be used with apple TV.  Anyone know the problem?

    Establish a Google+ channel. Then be sure your ATV has the latest update. This worked for me last week.

  • When I do a package my adobe-id is sign in and is the default account. How can I fix so that no account is sign in when creating package. Regards Daniel

    When I do a package my adobe-id is sign in and is the default account. How can I fix so that no account is sign in when creating package. Regards Daniel

    Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

  • What port numbers are used when creating temporary queues

    Using the following code as an example, what port(s) are used when creating temporary queues? Is it a range of ports? Is it random? And is it configurable? If you have any insight on this, please let me know. Thanks.
    QueueConnection con = connectionFactory.createQueueConnection();
    QueueSession session = con.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
    TemporaryQueue replyQueue = session.createTemporaryQueue();

    The only ports I know about are the defaults ports:
    JMS 7676
    IIOP 3700
    Are these the only ports that are used, even for temporary queues?

  • Create Purchase requisitions directly using PS network or indirectly ME51N

    Hello SAP-PS consultants,
    My customer manage big projects that most of the work done by suppliers, contractors and consultants. We use WBS element to define phases in project and for link to budget control in FM (every phase as different budget). We also use activities network to manage the work in the phases. I offer my customer to create Purchase requisitions, as a standard integrated process, using activities. My customer thinks that is more difficult and complicated to create Purchase requisitions directly using PS network. From your experience, is it better to create purchase directly using PS network or indirectly using MM transaction?
    Regards
    Muly Zohar

    Hi Muly,
    The decision to go for PR creation from PS or from MM will be based on the customer requirement.
    1.If the customer requirement is to have both the cost integration as well as the integration project schedule with the PR , then you create the PR from PS.Any changes in the dates of the network will change the requirement dates of the components and will be transferred to the Purchase requisition. Further more planned cost distribution across the duration of the activity is possible in this approach.
    2. Creating the PR from MM will have only the cost integration with the project. Any changes in the project schedule will not transfer the requirement date to the purchase requisition. You normally go for this where scheduling and procurement are independent of each other.
    By clearly explaining these points to your client, I hope they can  make a better choice of which approach to take based on business requirement.
    Regards
    K Ramaiah

  • Tables used when creating a sales return with and without refrence

    Hiya gurus,
                    I am developing a report to display sales order and sales return created from one partiular storage location and for one particular division. I need to get the tables used when creating the sales order and the sales return's.
                   For sale order I would be using VBAK and VBAP but for sale return with refrence and without refrence i am not sure which tables to look for.
                 kindly please let me know which tables i go for to get the sale return data.
                Thanking you very much, your efforts are deply appreciated
    Cheers,
    ZIa

    Hi,
    U can see VBFA tablefor CompleteDocu flow with differentconditions.
    Regards,

Maybe you are looking for