Global Monitoring Override Of Managed Availability Messages Failing
Hello,
I have a client that would like the managed availability probes disabled. I followed
this KB to do this, but the probe emails persist. My global monitoring overrides are shown below. The client has two CAS servers, one MBX server, and one Exchange 2010 server as of now. All
three show version 15 build 913.22, also shown below. This is the version I used with the -ApplyVersion parameter in the Add-GlobalMonitoringOverride command.
What can I try to resolve this?
Thank you!
Toni
Hi,
The ApplyVersion number is a combination of the version and build. (For example, your Exchange Server version is 15.0, the build is 913.22, and the ApplyVersion number is 15.0.913.22.) Please remove all Global Override and re-create them to have a try.
Add-GlobalMonitoringOverride -Identity "FrontendTransport\OnPremisesSmtpClientSubmission" -PropertyName Enabled -PropertyValue 0 -ApplyVersion "15.0.913.22" -ItemType Probe
Add-GlobalMonitoringOverride -Identity "MailboxTransport\Mapi.Submit.Probe"
-PropertyName Enabled -PropertyValue 0 -ApplyVersion "15.0.913.22" -ItemType Probe
Add-GlobalMonitoringOverride -Identity "FrontendTransport\OnPremisesInboundProxy" -PropertyName Enabled -PropertyValue 0 -ApplyVersion "15.0.913.22" -ItemType Probe
Then restart the Microsoft Exchange Diagnostics service and the Microsoft Exchange Health Manager service on all your Exchange Server 2013 servers: EXCH-CAS, EXCH-CAS2, EXCH-MBX.
Regards,
Winnie Liang
TechNet Community Support
Similar Messages
-
FileServer Resource Failed - No storage is available message.
1st node: TSMCTN (Working Fine)
2nd node: TSMCTADM (FileServer-(TSMCTNADM)(Cluster Disk 3) Failed)
First attempt, I try to delete File Server Resource without CAP (Client Access Point), it give me the network name "hostname+FQDN" is already in used
in the network.
2nd I tried deleted CAP and adding back File Server Resource, it still give me the same error message as above.
3rd, I'm Added back CAP and I tried to use other CAP name when adding a File Server resource in HA wizard, is working fine, but in add storage wizard selection, it prompt me no storage is available message.
Question I have is -
1.) Is there a correct steps for Adding a File Server resources in Failover cluster manager? e.g. 1st CAP, 2nd File Server, 3rd Disk Drives...Hi Umesh, thanks for your tips, but it does not help me on that. It still prompted " there are no available disks in the cluster "
Let me elaborate more about this;
In Storage at Failover Cluster Manager, I have four cluster disks is Online.
Disk Witness in Quorum
Cluster Disk 1 = Online
TSMCTN
Cluster Disk 2 = Online
TSMCTNADM
Cluster Disk 3 = Online
Cluster Disk 4 = Online
My question here is, I have a problem to add back File Server resource in tsmctnadm cluster node due to no storage available, is that mean I have to de-attached Cluster Disk 3/4 and Remove from Tsmctnadm cluster in order to get back my file server resource
and then later add back? -
Hi, i have created some site collection columns with managed metdata and taxonomy term sets. I have then created some site content types of those site columns. Some of them function properly and some don't.
When i have created or uploaded a document to the document library i start to "tag" the document by first choosing witch conent type i want too use, but when it comes to save the document it renders an error message(its not the full content
of the message):
"exception message, failed to get value, could not load managed metadata, invalid field name"
I have created some other site content types before and with the same site columns and they do not generate a error message. Is there a solution for my dilemma?try these links:
https://prashobjp.wordpress.com/2014/02/14/failed-to-get-value-of-the-column-name-column-from-the-managed-metadata-field-type-control-see-details-in-log-exception-message-invalid-field-name-guid-site-url/
http://www.sharepointconfig.com/2011/03/issues-provisioning-sharepoint-2010-managed-metadata-fields/
http://blog.goobol.com/category/sharepoint/sharepoint-issue-troubleshooting/
http://www.instantquick.com/index.php/correctly-provisioning-managed-metadata-columns?c=elumenotion-blog-archive/random-whatnot
https://pholpar.wordpress.com/2010/03/03/taxonomy-issues/
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing -
Need to throw an alert or send an email if a message fails in the adapter e
Hello Guys,
We have 2 different types of scenarios Idoc to file and File to Idoc.
1) Idoc to File:
We need to send an email if the idoc message fails in the Adapter engine ( system error in the adapter engine)
2) File to Idoc:
We need to send an email if the incoming file fails in the Adapter engine ( system error in the adapter engine) or fails in the communication channel.
How can this be acheived ?Hi,
U can send mails if either sender or receiver side message fails and any error in intergration engine or adapter engine using Alert management.
Alerting is an function of Runtime Workbench along with Message archiving,End-to-end monitoring, Performance Monitoring,Cache monitoring.
Alerting is no longer dependent on the configuration and activation of end-to-end
monitoring. Consequently, the delay between when an error occurs in message
processing and the creation of an alert is significantly reduced. Furthermore, you no
longer need to schedule the report SXMSALERT_PROCESS_DATA_GET as a
background job.The Runtime Workbench has CCMS Alert Monitor thru which
You can now configure one new CCMS Alert Monitor per Adapter Engine for
adapter-specific processing errors.Alerts triggered by the Runtime Workbench can now be forwarded to the CCMS Alert
Monitor and displayed there.
See also SAP Note 824039.
Thru Runtime Workbench we can access alert inbox, alert configuration
In process Integration with Central SAP Monitoring Infrastructure we Drill down to individual process steps and Use SAP Web AS Alert Framework.
In SAP Web AS Alert Framework, we Classify errors and Alert channels (such as e-mail) available.
Alert-Configuration
Objective: Active Monitoring
CCMS Alerts + message-oriented alerts
Based on SAP's Basis Alert Framework
Alerts propagated through E-Mail, SMS,
In Monitoring the SAP Exchange Infrastructure, Message Alerting is part of Runtime Workbench.
Alerting Framework
?? Configuration of alerts to reflect the needs of specific processes
?? Part of SAP Web AS
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Custom Alerts in CIC Win Client for CRM 5.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601db2b2-2839-2a10-0381-8807979f6ff8
Understanding u'r SAP EarlyWatch Alert Report
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
For raising an alert you need to first configure the alert please follow the below weblog written by Michal Krawczyk
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Regards,
Phani
Reward points if Helpful -
Indexing Schedule Manager on Server Failed!!!
Hi All,
Below is the error message from the ULS logs regarding the Indexing service. As a result of this, I'm unable to see the Content Sources and Crawl History on Central Admin. I further found out that one of the server in our farm is in Converging Status under
NLB (Network Load Balancer). Could this be the issue? But why would it say access denied. The search service account has not been modified or the permissions have never changed. Thanks in advance for any pointers.
Entering monitored scope (Timer Job Indexing Schedule Manager on WCRSPT02) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
executing job Indexing Schedule Manager on <Server> 8a76f83b-9c75-48d4-8764-61fb0d93ca49
CContentSourceCollection::ValidateTrigger in m_pScheduler -> Activate or NewWorkItem, Error is 0x80070005 [contentsource.cxx:1126] d:\office\source\search\native\gather\server\contentsource.cxx
<Exception><HR>0x80070005</HR><eip>000007FEE2929257</eip><module>d:\office\source\search\native\gather\server\contentsource.cxx</module><line>1127</line></Exception>
The Execute method of job definition Microsoft.Office.Server.Search.Administration.IndexingScheduleJobDefinition (ID 0141a0f4-9c0a-4aa3-901f-f0bd5bb7f51d) threw an exception. More information is included below. Access is denied. (Exception from HRESULT:
0x80070005 (E_ACCESSDENIED)) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
Exception stack trace: at Microsoft.Office.Server.Search.Administration.SearchApi.RunOnServer[T](CodeToRun`1 remoteCode, CodeToRun`1 localCode, Boolean useCurrentSecurityContext, Int32 versionIn) at Microsoft.Office.Server.Search.Administration.SearchApi.GetContentSources(Int32
versionIn) at Microsoft.Office.Server.Search.Administration.ContentSourceCollection..ctor(Content parent) at Microsoft.Office.Server.Search.Administration.Content.get_ContentSources()
at Microsoft.Office.Server.Search.Administration.IndexingScheduleJobDefinition.Execute(Guid targetInstanceId) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean
isTimerService, Int32& result) 8a76f83b-9c75-48d4-8764-61fb0d93ca49
Leaving Monitored Scope (Timer Job Indexing Schedule Manager on WCRSPT02). Execution Time=50.1862666903196
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***Hi,
According to your post, my understanding is that Indexing Schedule Manager on Server Failed.
I recommend to reset Index and have a full Crawl. Please refer to:
Unable to view content sources or crawl history in Search server 2010 Central Administration: share point
You need to check whether you have an additional Search Service Application and is stuck in an error state. If so, please run the configuration wizard to remove the previously mentioned Search Service Application that was corrupted.
In addition, please follow the instructions to check whether it works:
stsadm -o osearch -action stop
stsadm -o osearch -action start -role index
Open Central Admin - select your SSP
Check / validate your search service configuration.
Here are some similar articles for your reference:
http://social.technet.microsoft.com/Forums/en-US/a2f749bf-5d8b-4c0e-8fdd-464bd21d0e0a/indexing-schedule-manager-failing?forum=sharepointadminprevious
http://bruteforcesharepoint.blogspot.com/2009/04/event-log-errors-6481-and-6398.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Hi,
I am getting a pop-up message(Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.Make edits in checked-out enterprise global template to make them
available for all users of this project server) when trying to insert a new column in the Gannt Chart View.
Due to this what all are the columns that inserted in the project plan, will be lost when open the project in the next time.
I have opened the Enterprise Global Template and cross checked for Gaant Chart view it is showing the table as "Entry" only.
The requirement is what all columns are required for the project plan, manager will insert in the project first time. Next time on-wards it needs to be display the columns when opened the project from server by default.
We are unable to reproduce this issue in our Dev Envt.
Could anyone of you please help me.
Thanks in Advance!
Regards,
VenkatHi Venkat,
I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
Does that help?
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support! -
ArchLinuxForums_Suck wrote:
Hey, I'm new to Arch and I've been working on setting it up on my Laptop and so far I haven't had very many problems save one. I can't get any of the available Window Managers. Whenever I try running them I get a message like:
"wmii: fatal: Can't open display," or "Error: Couldn't connect to XServer" (Fluxbox), or "twm: unable to open display" or "dwm: cannot open display" or "Openbox-Message: Failed to open display from the DISPLAY environment variable,". What am I supposed to do? I've checked to see if it was a problem with my installation of Openbox by reinstalling that and installing several other window managers, and I've checked to see if it was a problem with me not having the right kernel modules loaded, but after I ran "hwdetect --load-modules," which is supposed to load all detectable modules, but even after that I still get the same messages. Any ideas, I've tried just about everything that I know\have thought about, so yeah... any ideas?
ngoonee wrote:You'd need to provide us with details on your system. For example, what GPU are you using? hwdetect can be hit-and-miss sometimes.
karol wrote:How exactly are you trying to run them? Are you trying to run them as root? Are you using .xinitrc? If so, post it.
Boxes wrote:Uh... I try running them by typing: "openbox" or "twm" or "wmii" or "xinit openbox-session", and when I run "xinit" by itself, I get this: ". . . (EE) Failed to load module 'glx' (module does not exist, 0), (EE) Failed to load module 'intel' (module dose not exist, 0), (EE) Failed to load module 'vesa' (module does not exist, 0), (EE) Failed to load module 'fbdev' (module does not exist, 0), (EE) No drives available." Oh, and nGone I'm running an Intel Mobile 4 Chipset. I don't have a GPU. I just have an Intel Graphics Controller.
Boxes wrote:Okay, well I got "xinit openbox" to work by searching for the "intel," "vesa," "fbdev," and "glx" packages via pacman and installing them. I still can't run openbox without xinit, and I tried running "xinit wmii," but it didn't seem to work, although it did run, but I couldn't do anything. It looked exactly the same was as "xinit openbox" did right after I installed "vesa," which was the first package I downloaded and installed via pacman.
tomk wrote:
You need to read a bit more about how X works - you can't run any window manager unless there's a X session for it to run on. That's why xinit works. Set up your ~/.xinitrc correctly and use startx.
xinit wmii ran a wmii session, but I guess you didn't configure it at all - that's why you couldn't do anything. Again, more reading required.Oh, I see. So an X-session is something that's required. Oh, okay.
-
Monitoring with Server Manager?
I start Server Manager in an xterm window with command
svrmgrl
and log in with system account. However, when trying to monitor
the database, the following message appears (interpreted by
oerr):
[oracle@rxo log]$ oerr MGR 4501
4501, 0, "monitors are not available from the line mode Server
Manager"
// *Cause: You attempted the MONITOR command from Server Manager
line mode.
// *Action: Start Server Manager in graphical mode to run
monitors.
So: What is the right way to use the monitor command. Should I
start svrmgrl with some weird parameter ?
nullRisto Raitio (guest) wrote:
: I start Server Manager in an xterm window with command
: svrmgrl
: and log in with system account. However, when trying to monitor
: the database, the following message appears (interpreted by
: oerr):
: [oracle@rxo log]$ oerr MGR 4501
: 4501, 0, "monitors are not available from the line mode Server
: Manager"
: // *Cause: You attempted the MONITOR command from Server
Manager
: line mode.
: // *Action: Start Server Manager in graphical mode to run
: monitors.
: So: What is the right way to use the monitor command. Should I
: start svrmgrl with some weird parameter ?
Correct me if I'm wrong here, but I think the "l" in svrmgrl
stands for "l"ine mode.
Rob
null -
Monitoring of older RFC Adapter messages - RFC API
Hi,
I have successfully implemented a number of scenarios (File to rfc & File to Idoc)that required external data lookup - using the RFC API (calling a customer RFC FM) (and parsing the response with DOM).
I am also using Global variables to store my lookup responses to help minimize the number of RFC calls invoked.
When trouble shooting - as expected the log in the communication channel for the RFC adapter shows the BAPI response. However the number of records is always restricted to 25.
If I process a message with 30 records, and lets say the first RFC Lookup fails but the remaining 29 are successfully - because the log is limited to 25 I lose a record of this error.
Am I missing another method of search?
Is this just a display restriction and perhaps I could report over the underlying tables myself?
Regards
AndrewCommunication channel monitoring is as i understood primarily für monitoring the module chain a message is eventually running through. Did you try monitoring via RWB->Message Monitoring or sxmb_moni? There also should be a reference to the response. Maybe I didn´t get you right, but as far as I remember RFC Calls are also listed there with a bigger history.
Thomas -
The usage monitor is currently not available
BT.com message...
"The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
Well, finally BT's complete lack of ability to manage their core business is paying off.....can download/will download.....FANTASTIC!!!
And if you aren't affected by this and Do go over your limit...I'd complain to ofcom....you can't treat one customer one way and another a more preferential way....
Oh, and if you pay for anything more than 10MB download per month, I'd also ask for a discount......
Thank you BT...may your utter incompetence reign supreme forever....
All hail the God of failure...yes, Mr Buckley...I'm genuflecting in YOUR direction!!!Hi Guys,
Thanks for raising this. I am sorry that you are having problems with the usage monitor. I would like to sort this out.
Can I ask that anyone having issues, Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Hi,
I try to install, the SQL Express 2008 R2 with Advanced
The installation has only one error (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Start time: 2015-01-02 16:17:17
End time: 2015-01-02 16:24:01
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?
LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
Machine Properties:
Machine name: KHPNHSI_BNANG
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: g:\41bee43707e62fab54ec\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: g:\41bee43707e62fab54ec\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PSI\ssamnang
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SystemConfigurationCheck_Report.htm
Please help!
Samnang.Hi SSamnang,
According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
use google drive to upload the error log following the steps in the article:
https://support.google.com/drive/answer/2424368?hl=en
From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
In addition, there is a similar thread for reference:
https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
Regards,
Michelle Li -
Management Configuration Service failed to process agent configuration request
We're having a SCOM environment with several Management Servers. Since about two days, we're receiving the following alerts in SCOM and Management Server State is Critical:
Name : Management Configuration Service failed to process agent configuration request
Description : Management Configuration Service failed to process agent configuration request.
OpsMgr Management Configuration Service failed to process configuration request
(Xml configuration file or management pack request) due to the following exception
Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAccessEx
ception: Data access operation failed
at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAc
cessOperation.ExecuteSynchronously(Int32 timeoutSeconds, WaitHandle stopWaitHandle)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
ConfigurationStore.ExecuteOperationSynchronously(IDataAccessConnectedOperation
operation, String operationName)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
ConfigurationStore.GetConfiguration(IDictionary`2 agentList,
ConfigurationSignature configurationSignature)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.AgentRequestPro
cessor.ProcessConfigurationRequest(ICollection`1 requestList, Int32&
processedRequestsCount)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.AgentRequestPro
cessor.Execute()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.ThreadManager.R
esponseThreadStart(Object state)
System.Data.SqlClient.SqlException (0x80131904): Timeout expired. The timeout
period elapsed prior to completion of the operation or the server is not
responding. ---> System.ComponentModel.Win32Exception (0x80004005): The wait
operation timed out
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean
breakConnection, Action`1 wrapCloseInAction)
at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand
cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryReadInternal(Boolean setTimeout,
Boolean& more)
at System.Data.SqlClient.SqlDataReader.Read()
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
AgentConfigGetOperation.ReadAgentPoolInfo(IDataReader reader,
AgentConfigurationBuilder builder)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
AgentConfigGetOperation.ReadData(SqlDataReader reader)
at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.Reader
SqlCommandOperation.SqlCommandCompleted(IAsyncResult asyncResult)
ClientConnectionId:e44a346e-adb8-4679-9b0d-b515ac24df95
As of that I'm pretty sure that it's related to a SQL Issue. I think it's related to SQL performance, as the server is available and can be reached:
System.Data.SqlClient.SqlException (0x80131904): Timeout expired. The timeout elapsed prior to completion of the operation or the server is not . ---> System.ComponentModel.Win32Exception (0x80004005): The wait timed out
at ....
Related to the error I also see warning related to "Local Dirty Notification State" and "Delta Synchronization State"
Thanks for any helpHi,
You may need to check whether your SQL server which hold SCOM database has any performance issue. You can restart related SQL services and system center management configuration service. In addition, please check operation manager event logs on management
server and find out is there any error messages related.
If there is event 31552, then you can try links below to troubleshoot it:
http://blogs.technet.com/b/sudheesn/archive/2009/07/28/getting-31552-exception-sqlexception-timeout-expired-very-frequently-in-scom-server.aspx
http://blogs.technet.com/b/kevinholman/archive/2010/08/30/the-31552-event-or-why-is-my-data-warehouse-server-consuming-so-much-cpu.aspx
In addition, please also try to flush health service state and caches for management server.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hi,
I am in the process of installing Business Objects XI 3.1 in one of our server. While installing I am getting the error 'The Central Management Server has failed to start. Press 'retry' to attempt to start it again or 'cancel' to skip any actions dependendent on the Central Management Server. STW00213.'
I have tried re-installing the BO, and also tried installing without giving admin password. But it doesn't work. And also I ahve tried giving the passwords of database and CMS Admin without Sepcia Characters. But it also doesn't work.
If I cancel and install the BO, Server Intelligence Agent is not available in Central Management Server.
Could anyone help on this issue?
Thanks
PrakadeshHi Prakadesh,
Try these steps.
1. Stop and disable the service of current SIA. You can do it from start-->run services.msc. Double click the SIA service and change the status to disable.
2. Login into sqlplus and drop all the CMS tables.
3. Create a new SIA pointing to Oracle from the CCM.
4. Start the new SIA and check if all services come up and you are able to login into Manager servers.
If this does not work, check the event viewer for error messages.
Regards
Chinmaya -
1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish -
Remote Management - Rights Authentication Failed
Since upgrading from zenworks 10 to zenworks 11 I am getting the following error when I try to remote to workstations. I am not receiving this on all workstations, just some.
Zenworks Remote Management
Rights Authentication failed. An internal error occured while validating
information about the managed device. If the problem persists, contact
Novell Technical Services.
I cannot find any info on this particular error. Workstations are Windows XP SP3. This error did not occur before the upgrade to Zen 11.
Any suggestions would be appreciated.
Thank You
Debraruybalda,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Maybe you are looking for
-
How to change a text in an icon prorgrammatically
Hi, I've got some VIs that have a text in common in their icons but I would like to change that text because I'm going to use that VIs in another part of the project. So, how can I change that text programmatically in all VIs that are in the same dir
-
Domain and User Level Security
Dear Friends Tuxedo Version : 8.0 Weblogic Server: 7.0 Operating System : Win 2000 I have successfully run the simpapp example with WTC as the connector between the remote domain (tuxedo) and local domain (WLS). Now, i want to perform authentication,
-
Can Quicktime on a Macbook Pro play DVCpro HD without dropping frames?
I know this is a cardinal forum sin, but I think I posted this in the wrong place to start. Hey All, I'm trying to output a 40min DVC Pro Hd 60, 1280x720 video to a projector for a large group. I'm using Quicktime 7.2 at full screen playing back on t
-
Sales order number in not coming as a text in Accounting Document
Hi Friends, Sales order number in not coming as a text in Accounting Document in INSTALLMENT BILLING PROCESS is there any config missing for this doc number Pl advise me Raju
-
Missing image command line utility help
Hi all, I can't seem to find the name of the utility (command line) that is very similar to ImageMagick. I know it's there because I used it before. It lets you manipulate images in various ways including resizing, changing the format, the colorspace