Globally open and close all accordion panels

Is there a way to globally open and close all accordion
panels? For example, it would be nice to have an "Expand all" and
"Collapse all" link at the top of the page, before the accordion,
that has this functionality.

Hi FM_n_DC,
Accordions can only ever have a single panel open. If you
want individual control over which panels are open you probably
want to use a CollapsiblePanelGroup. This sample shows how to open
all and close all of the panels of the CollapsiblePanelGroup:
http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html
--== Kin ==--

Similar Messages

  • Apps open and close all of the sudden

    Ok, my iphone was working fine until 10 minutes ago. I had no issues with it and all of the sudden, I tried opening up an app and all it will do is just open and close all of the sudden. And it's with ALL apps! I tried doing everything there is to do to solve the issue and nothing. I even followed someone's post about downloading a free app and nothing. I have tried restoring it, doing the sleep/wake and home button till apple logo comes up, and turning it off normally, and even re-syncing to computer and NOTHING! What should I do?

    Download another free App - doesn't matter which one.
    Sync and then hold down the Home and top button until the phone switches of completely.
    Restart the phone and you should be fine - you did nothing wrong but its a sign of a bad sync.
    You're not the first so enjoy !

  • Close all accordion panels

    Hi,
    By default when I use spray accordion the first panel is
    always open. Is it possible to have all Accordion panels closed?
    thank you

    this does not work in FireFox for mac. it starts with all
    panels closed for sure, BUT when you open one, it opens but (1) not
    all the way showing all of the panels content and (2) nor does it
    give you a scroll bar to see all of the content and (3) if you open
    a panel it pushed lower panels down so low you cannot see them any
    longer.
    in Safari it opens the panel and 'sometimes' just elongates
    your page so no scroll bar needed, but all the content is there IF
    you designed a page that can grow. but sometimes it does not grow
    and exhibits same above behavior.
    so, not so sure this is a solid cross browser method to
    achieve.

  • How to automatically open and close collapsable spry panels?

    I designed a collapsable spry panel in DW to open and close automatically, with a 10 sec delay, unless person clicks on tab to close immediately.
    The spry panel opens automatically, but will only close if i click the tab.
    Is there a way for the collapsable spry panels to close automatically?
    [Moved to Spry forum by moderator]

    Arnout,
    I feel certain the answer I need is in the reply you posted here, but I need a little more help to know exactly what to do.  I am using a collapsible panel to show and hide a series of onload panoramic photos near the top of my page.  What I want is for the collapsible panel to be open on some pages and closed on others and I want the animation of the panel closing to be seen too.  I'm thinking this should be achievable with some sort of onload trigger or something.  Currently I've gotten close to what I want by referencing two different .js files (one for the "open" panel state and another for the "closed" panel state), but this doesn't show the graceful animation of the panel closing.  Any ideas on how to achieve what I want?  Here is the url of the test site I'm developing:  http://www.gregdanpartners.com/lrre2/index.html
    Thanks in advance.
    Dan

  • My drive is ALIVE. OPENS AND CLOSES ALL ON IT'S OWN ??!!

    Hi. If I put in a disc and close the drive, DVD burner, it opens itself in 3-4 seconds. When left open, it closes and opens itself after some minutes. Got a mind of it's own. Any you guys a mind reader?
    Also, is the Pioneer 117D the drive of choice for this machine:
    867MHz G4 1.5GB memory, two 120GB hard drives RAID 1 mirrored OS X 10.5.6 Superdrive DVD burner, 4 port USB PCI card.
    Thanks. dennis

    Hi-
    Sometimes dying drives do that.
    Stuck eject, F12 or C keys can cause that too.
    The Pioneer drives are always highly recommended.

  • One link to open/close all _accordion_ panels

    I am aware that collapsible panels have group feature and you can open and close all panels by wrapping the individual panels within a group.
    Is there a way to open all panels in an accordion widget?

    Open all, no.
    Close all, yes (set panel to -1, with the useFixedHeights:false option)

  • Accordion-Toggle Open and Close

    I apologize if this has been covered before, but I checked
    and couldn't find a solution. I'd like the accordion to toggle
    between open and close the same panel. Right now, when I click on
    it, it opens, but it doesn't close when I click on the same panel
    again. Is there any way that can be achieved?

    Don't you just want the :
    http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/collapsible_panel_sample. htm
    http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/collapsible_panel_sample. htm

  • Accordion Panel Widget - open and close speed.

    Hello,
    Is there any way to change the speed that an Accordion Panel Widget opens and closes?
    I would like it to be slower than it is now.
    For my project it would be more relaxed and graceful.
    Thanks,
    Chris.

    HI Chris
    With Accordion we cannot setup the speed as of now , but you can try out composition widget where we can define transition, auto play speed.
    Thanks,
    Sanjit

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • Open and Close Front Panel of SubVI

    Hi all,
    Running LabVIEW 2011 on Windows 7 x64.  I am trying to get a subVI front panel to open from my main FP with the press of a button and then close with a button press in the subVI.  Here is the piece from my main FP that calls the VI and opens the FP 
    Plots is defined in another loop and all of the loops are in a flat sequence.  I did it this way because I want it to start with the first press and not stop my main loop from running.  I have moved the item in the left loop around a lot so I'm not sure if I can run that in the same loop as the event or not.  Either way opening the VI seems to work fine.
    The problem shows up when trying to close the subVI for the SECOND time.  The code is here:
    As I said, the first time I open and close the VI everything works as I expect it should.  I am then able to open it again but now the "blank button" doesn't function and I can't close the window or even open the block diagram to probe anything.  I have been trying to figure this out for awhile, any insite would be greatly appreciated!
    Thanks
    Solved!
    Go to Solution.

    Its good that you found the bug.
    This code may serve as a way for you to compare notes.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Would you Open and Close DAQmx tasks within a function or Globally

    Hi Guys,
    This should start something.
    The subject is DAQmx Tasks.
    If you were writing a function that is called many times, say MeasureVolts (double *Value) to obtain a reading from an Analogue Input Channel.
    Would you.
    1. open and start the task inside the function, do the measurement and then close the task inside the same function.
    or
    2. open the task globally and later do the measurement inside the function using the global task then close the task only when the application is closed.
    I am mostly concerned with the overhead of task generation and closing, what do you guys and girls out there do?? and what is the general opinion?
    I would appreciate your views.
    Regards
    Paul.

    I would definitely NOT keep configuring and clearing (I think that's what you mean by open and close) the same task over and over.  I would configure once, read many times in my main app, then stop & clear once.
    I typically like to package such data acq into an "Action Engine" that keeps track of its own DAQmx task id so I don't need to sling that task id wire around into multiple parallel loops / vi's.  Attached is a very stripped-down example for Digital Input. 
    I would typically do more with error testing and would make the "Action" enum into a typedef custom control, but this gives you the basic idea.  The action engine approach works very nicely when there's a small # of different kinds of input parameters and output info needed to support all the necessary action cases.   When you start needing a large number of differnent kinds of inputs and outputs to support the desired actions, then you start having difficulty with (1) having enough terminals to wire and (2) remembering which inputs and outputs are meaningful for which actions.
    -Kevin P.
    Attachments:
    DI Action Engine.vi ‏75 KB

  • IMessage beta loose all saved conversations when I open and close a window.

    iMessage beta looses all saved conversations when I open and close a window.
    Just reporting this bug... Could not find anyother place to do it.
    Jonathan

    I thought it was doing that also. But I found that if I start a new chat with someone I was messaging before, then the old messages re-appear in the messages window.

  • ALL of my 3rd party apps open and close immediately

    after connecting to itunes after a few months now ALL of my 3rd party apps open and close immidiately when i try to open them

    First try a hard reset.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.  If that doesn't help, try downloading a new App free app from the app store to see if that helps.
    B-rock

  • Open and Close Posting Period (OB52)

    Dear Experts,
    My client wants to close the posting period of the previous month. 
    First I went to transaction OB52 to define an entry From Per. 1 2008 To Per. 12 2009 to open all the posting period for the year.  But when the time passes, do I have to manually change the From Per. back to the current month (e.g From Per.1 2008 changed to From Per. 2 2008 and so on)
    If this is the case, is there any way to make this a automatic function to do this.
    Points will be rewarded.
    Thanks.

    Hi,
    You define posting periods in your fiscal year variants. You can open and close these posting periods for posting. As many periods as you require can be open for posting simultaneously. Special periods can be open for closing postings during the period-end closing.
    You have the following options for opening and closing posting periods:
    - Posting Period Variants: You can specify which company codes are open for posting in a posting period variant. Posting period variants are cross-company code and you have to assign them to your company codes.
    - Account Type: You can differentiate the opening and closing of posting periods by account type. This means that for a specific posting period, postings can be permitted to customer accounts, but not to vendor accounts.
    - Account Interval: You can differentiate the opening and closing of posting periods by account intervals. This means that you only open a posting period for posting to a specific account.
    Path for making the settings for opening and closing posting periods:
    Customizing for Financial Accounting under Financial Accounting Global Settings -> Document -> Posting Periods
    For detailed example for opening and closing posting periods please refer the link below:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/96/8b300943ce11d189ee0000e81ddfac/frameset.htm
    I hope it will help.
    If helpful, please assign points.
    Regards,
    Manju

  • OB52 :- Open and Close Posting periods Due to not modifiable of  PRD system

    Dear All,
    Due to not modifiable status two transaction could't be done in the PRD  System.
    This is IMG activity under the following.
    1. OB52 :- Open and Close Posting periods (FA -> FA Global Setting -> Document ->Posting -> Open and Close Postinfg periods
    2. OB08 :- Enter Foriegn exchange rate. (Gen Settings) Enter foriegn exchange rate
    These transaction are to be executed regularly and directly in the ECC6.0 Production system is not possible due to non modifiable status.
    Please help me regarding this issue

    Check Note 77430 - Customizing: Current settings
    Markus

Maybe you are looking for