Gnucash and gnucash-docs don't seem to like one another.
I am trying the gnucash application out. But even though I have installed the gnucash-docs package, gnucash says that it can't find it. Is this a bug or just me being an old <expletive deleted>? Where should it find it's docs? And where does gnucash-docs install them?
Geesh....it's been over a year and this is *still* listed as a LOW PRIORITY bug. <- How can a missing dependency, with full documentation in the bug report as to it FIRM and ABSOLUTE requirement be listed as such ? Sigh......
( I am guessing this bug report and thread were on the DEV's "to-do-list" but somehow, over time, been forgotten. Hmmmm, what to do about reminding him ? )
Last edited by nmlibertarian (2015-02-13 15:25:39)
Similar Messages
-
[svn:bz-trunk] 8731: Bug: BLZ-251 - Destination.stop() and Service.stop() don't seem to do anything
Revision: 8731
Author: [email protected]
Date: 2009-07-22 07:08:20 -0700 (Wed, 22 Jul 2009)
Log Message:
Bug: BLZ-251 - Destination.stop() and Service.stop() don't seem to do anything
QA: Yes
Doc: No
Details: Reintroduced the change 7370 that fixed this problem but broke the LCDS Edge server; there will be another check-in in the LCDS branch to make sure this fix doesn't break the Edge server again.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-251
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.javaHi Ingrid
Thanks a lot for the response.
That parameter is right now set to "0".
But on reading the documentation for that parameter, it says you should change it only if SAP recommends you to do so.
We checked in our other systems as well and all that is set to "0" as well.
Will that be Ok to change the parameter to a different value?
If yes, what is the value to be used?
Thanks a lot -
I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't seem to figure this out. Is there a better way to smooth skin?
Here's an Adobe help page for isolating skin with suggestion on the use of the blur slider also:
https://helpx.adobe.com/speedgrade/using/apply-secondary-color-corrections.html
And here's one of the original creators of Iridas/SpeedGrade, Patrick Palmer, a six minute vid-tut on using secondaries (specifically in CS6 but this hasn't changed):
http://tv.adobe.com/watch/learn-speedgrade-cs6/secondary-color-correction-in-speedgrade-cs 6/
I'd note, the "blur" and "denoise" tools on the Secondary tab are more about smoothing the keying of the secondary ... they apply a bit of blur or de-noising to make the secondary smoother and cover over the odd pixel or three or four that don't "fit" the key of the secondary in the middle of something you're aiming for.
In current SpeedGrade, I'd try using the Guassian Blur (Range) effect, and sample a good range of the skin tones.
And a lot of people use Red Giant's "Cosmo" plug-in over in AfterEffects or Premiere Pro ... it's a tool designed specifically for working skin tones, dealing with blemishes, wrinkles, spots, and such.
Neil -
Adobe reader X and XI search don´t find text like other programs including adobe reader 9? Thanks
Adobe reader X and XI search don´t find text like other programs including adobe reader 9? Thanks
You mean, you are trying to search text in a PDF file, and you can do it in Reader 9 but not in later versions of Reader (using the same file)?
-
How can I decrease my font size in mail? I have it set to small and yet it is enormous, letters running into one another. I have rebooted and more. Something is over riding my setting. Any suggestions?
You haven't mentioned which mail it is,
If it is G-mail go to settings --> general tab--> default text style , you can change your font size & then save at the bottom of the page -
I went to silence my iPhone 5s and had a box pop up--looked like one of those boxes telling me turning on Location Services would help--telling me I needed to change my password within 60 minutes.....I turned the phone off. Can anyone explain this to me?
I went to silence my iPhone 5s and had a box pop up--looked like one of those boxes telling me turning on Location Services would help--telling me I needed to change my password within 60 minutes.....I turned the phone off. Can anyone explain this to me?
-
My laptop is not a phone. Don't treat it like one.
My laptop is not a mobile phone the last time I checked. Unless mobile phones started weighing 15 pounds and play Crysis 2 Maxed, Star Citizen Maxed, and any other game you can think of, maxed, with 18" screens.
So, don't treat it like a mobile phone with your crappy chat bubbles that liturally everyone who isn't on a mobile phone hates, even some people on phones hate it.
Why is it so hard for Microsoft to add options to the app? Seriously? Liturally every other chat program in the world has the ability to be skinned to the user's liking. What does MS do? They force you to use their choice only. Then people came up with MSN Plus when MSN used to exist and they kept trying to take that out cause like, god forbid users have some choices when using a messenger. God forbid we actually like the look of our messenger!
I've posted this elsewhere, but this used to be my messenger before you canceled skypekit.exe for no reason whatsoever other than to force people to use mobile ugly skype.
Now here is what I'm stuck with,
Isn't it wonderful? Look at all that space I totally saved in my tiny small sentences of messages. By having 4 inches of white on either side of my messages. Cause that's how real messengers look now days.
However I did notice you can expand the thing a bit, but the chat bubbles are still confusing and useless. you have tons of angry people posting that they want them gone and your responce, is to ignore them? I thought Microsoft was all about listening to the customer. Is that not really true? No one wants bland Windows 8 paint.exe type graphics. That's why I'm still on Windows 7, cause liturally there is zero advantage to downgrading to Windows 8 or 10. All you get is a loss in graphics and the world's ugliest apps. :/ Skype being an examle of this, being forced on people who still have a real operating system like me.
The world isn't full of tiny pitiful tablets that have a processor as powerful as a SNES. Stop treating us like all our computers suck and couldn't process a simple gradient or rounded corner or Windows Aero. If people don't want Aero, they will disable it. Don't automatically disable it for them and give them something you drew up in paint.exe. Seriously. Skype is the ugliest thing on my laptop now. :/
Thank you, this has been another angry rant by me, Vas.You are not alone in wanting options! There's a very long thread on the 7.0 UI currently running at 850 messages, of which about 2 have been positive. You may want to take a look there too.
(And you may also want to read my blog post ...)
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design -
I can't remember the name of the Mozilla weather program that was on my computer, but it's no longer there now that I've updated to Firefox 4.0.1. I don't know how to get it back!
You ''may'' have created a customized Google home page. Try this address and when you find your customized page, you can make it your home page:
http://www.google.com/ig
[http://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page How to set the home page | How to | Firefox Help]
''On the other hand'', if your weather appeared in a toolbar, it's possible that the add-on is not yet compatible with Firefox 4. If you explore the following list, can you find a disabled weather add-on?
(If you have the orange Firefox button, tap the Alt key)
Tools > Add-ons > Extensions -
Time Machine and Time Capsule don't seem to work well together?
Reposted.
I get the feeling there are some serious problems with the combination of Time Machine and Time Capsule.
This is extremely disappointing, as the idea of a centralized backup device on the network (instead of disks attached to each and every computer we have running Leopard) seemed like such a good idea and a good way to supplement our tape-based backup that takes place with Retrospect.
In reality, it's a disaster on both Intel and PowerPC systems. All systems and the Time Capsule are fully up to date with software updates from Apple. I have two 1TB Time Capsule units. It goes something like this:
1. I have a few systems (mainly Intel) that work perfectly with the Time Capsule. There are no complaints and no issues at all. These systems just quietly run their backups as they should. They are the definite minority--maybe one or two have worked properly.
2. I have some systems that complain from time to time (mainly PowerPC) but will back up with a little encouragement. These too are the minority.
3. And finally, I have systems that are nothing but pain. These are both Intel and PowerPC systems. They are also the majority of the systems I have. The most common problem is sudden loss of the credentials needed to access the Time Capsule hardware--a user will be going along about their business when the Mac OS asks for the Time Capsule user name and password--after it's already been supplied and backups have been running. This should simply never ever happen.
Another charming behavior I've seen is corruption of the sparse disk image file that each computer creates on the Time Capsule. Time Machine will complain that it can't perform the backup, and examining the disk image file with Disk Utility shows it to be severely damaged. Turning off Time Machine, deleting the corrupted sparse image file, and starting over fixes it. For a while.
Finally, there are the machines (again, both Intel and PowerPC) that just can't seem to actually get through the first backup run. They either go so far and can't continue, or never actually manage to get started. I've checked the disks in these computers and found no problem with the hardware or file system. The installations are fresh and fully up to date.
Meanwhile, I have computers running Leopard with directly attached disks configured for use with Time Machine. One is a QuickSilver that isn't even officially supported by Leopard, with a Firewire attached disk. It doesn't skip a beat. The other is an Intel Mac mini being used with Mac OS X Server 10.5.4 and a USB external hard drive. These machines just do their thing, and I never have to babysit them.
These problems with the Time Capsule have been so severe that I've just given up on most of the computers and shut off Time Machine entirely. We have tape backups that run over the week, so it's not a huge loss. But that's not what really made me throw up my hands and say "enough"...no, that was the speed. Even with just one computer backing up to it, the Time Capsule seemed terribly slow. Watching the progress indicator was just painful.
I put in a word about all of this to my independent Apple dealer, and they say I'm definitely not the first to complain about some or all of these problems. In fact, they told me they were going to set up a test lab in their shop to see if they could duplicate these findings. I have no doubt that they can.
There are a total of seven computers backing up to one Time Capsule. They all store maybe ~40GB worth of data including the OS. There are about six computers on the other. Because of the way the network is laid out, the Time Capsule is connected to a Gigabit switch (and that is the only thing it's connected to). It cannot be used as the router, although I know Apple suggests this. The Airport section is disabled--I have no need or desire to use it. Some computers link up at 100 megabits, others at 1 gigabit. There are no network problems--we have no problems moving large amounts of data across the same network to our tape backup machine.
Is anyone else seeing these kinds of problems? Am I doing something wrong or expecting too much from Time Capsule?I may be on to something. The Time Capsules I have live in a telephone equipment room that is indoors but not directly air conditioned or heated. It doesn't ever get too hot to be comfortable in there--the highest I've ever seen the temperature was 80 degrees (F). Most of the time the temperature is between 60-78 degrees.
I happened to touch one of them the other day while it was in use, and I noticed that the casing was hot to the touch...not dangerously so I suppose, but much hotter than I would have expected.
So I turned a small fan on both Time Capsules and have left it running. And I've noticed that not only do backups seem to complete more quickly, the reliability is also better. I am going to try some of my most troublesome computers once again just to see what happens.
I know there is a fan pointed at the hard drive in the Time Capsule, but I can't see how it does much in the way of cooling things down. In my opinion, it's just surrounded by too many heat producing devices to do much good...after all, not only is there a 7200 RPM hard disk in there, but also a 500MHz Marvell processor and radio set. -
Help and Mail search don't seem to be working properly in Mountain Lion.
When i search for a keyword in mail and specify 'Entire Message', I don't get any results. Also, the OS X help function is not giving me any results because it says that it can't connect to the internet. The internet is connected and working normally in all other applications.
Regarding Mail, the entire message search uses Spotlight to find results. Is your Spotlight icon (magnifying glass) in the dock still indexing, or otherwise corrupted?
You may wish to just add and then remove your main hard drive from the Spotlight privacy pane. This will cause Spotlight to re-index the whole drive, and once that's done (it may take a few hours) the searches would work.
I'm not sure on Help... Any chance you're behind some sort of proxy server? -
ACR And Vista 64 Don't Seem To Get Along
Using the latest Photoshop CS4, w/all updates, Vista 64 / 32gb RAM. I start w/an empty cache, and a clean, separate internal scratch disk of sufficient capacity.
Using ACR, open a folder on my desktop, wait until all the thumbnails are rendered, (the little arrow in the LLH corner stops spinning), select the raw files to open.
ACR stops responding. I have to wait a minute or so, or close ACR and re-open.
I can try to open 2 files, or 10 files, with the same results.
I can't find any settings that affect this behavior. Any ideas ? TIA, IraSadly I have these issues also. The re-indexing of the phone takes so long that it almost never completes during my short drive between home, work & most places I go. Consequently Sync is almost always re-indexing my iPhone. Also about every 10th time I plug the phone in via USB Sync detects a "new" device which is very annoying. I've tried every solution to the bluetooth audio skipping that I've found and nothing makes any difference. I've gone so far as to un-pair the iPhone & Sync (on both ends), pull Sync's fuse to forcibly reboot it, reboot the iPhone, repair and setup bluetooth streaming. Even this rather draconian series of steps didn't stop the skipping. Oddly enough using the phone with Sync via bluetooth works beautifully.
The issues with USB I'm pretty sure are on the Sync end. The bluetooth issues I'm pretty sure are on Apple's end. The most frustrating thing is that Apple doesn't even seem to acknowledge that the skipping problem exists. -
New IPAD - cannot swith on for first use as iTunes activation not working - unable to set up new account- new user
Go to iTunes.com/download
Download and install latest version of itunes on pc (if not working chance pc. That's what i did)
Register
Connect the iPad to the pc
Follow instruction on iPad
Ciao -
BTW i am using SCOM 2012 R2. If you have the query to extract the availability data from the database, it would be of a great help. Also, i meant database when i said OperationsManagerDW table.
Hi,
You need following Parameters for example:
@ManagedEntityMonitorRowId
@StartDate=
'2014-05-01 00:00:00'
@EndDate= '2014-06-01
00:00:00'
@DataAggregation= '1'
@LevelCount= '1'
@LanguageCode= 'ENU'
To get the ManagedEntityMonitorRowId you can use following SQL Queries on the DWH (You
also can do it with a Inner Join but i'm not that good in T-SQL)
# MonitorRowID: With this query you can look after the ID based on the MonitorDefaultName
SELECT *
FROM [dbo].[vMonitor]
WHERE MonitorDefaultName = 'AD_Database_and_Log_DBSpace.Monitor'
# ManagedEntityRowID: With this query you can look after the ID based on the DisplayName of the Entity
SELECT *
FROM [dbo].[vManagedEntity]
WHERE DisplayName LIKE 'DC1'
# Now you can query for the right ManagedEntityMonitorRowID (For Example)
SELECT [ManagedEntityMonitorRowId]
FROM dbo.vManagedEntityMonitor
WHERE ManagedEntityRowId = '4753' AND MonitorRowId = '1371'
I hope this help you.
Cheers,
Christoph
Blog: http://blog.cmaresch.at/ Twitter:
LinkedIn:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
My facebook and twitter app don't seem to be working..
they are small and centered and small plus they aren't responding. I have re-installed it several times but still it won'twork. I have no idea what to do please help
Hey melissadiiaazz,
Thanks for the question, and great troubleshooting so far. You have almost exhausted all of the recommended steps, as outlined in this resource:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Some steps you may have not already tried:
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
1. Open the App Store and tap Updates.
2. If updates are available, tap Update All.
3. If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Contact the developer
If you see the issue again, contact the developer of the app for help:
1. Find the app in the App Store.
2. Tap the app and tap Reviews.
3. Tap App Support.
Thanks,
Matt M. -
Energy and Screen Savers Don't Seem to be Working
I have a 27" iMac (early 2011) running Lion. No matter how long I set the Energy or Screen Savers for, the screen dims after less than five minutes of inactivity then goes into screen-saver mode after another couple minutes.
Any suggestions?
Thanks,
LloydHi Lloyd,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
If that doesn't do it, (not on 10.7 to see if it's the same, but older OSX info)...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
(Then Trash the original of these last two, as "moving" them only copies them.)
Then reboot once more.
Maybe you are looking for
-
Qosmio X770 Where to get Corel WinDVD?
I got Qosmio X770. After having updated nvidia drivers, Corel WinDVE does not work anymore? How can I get it work again?
-
How can I add new songs to the top (not the bottom) of my playlist in iTunes?
How can I add new songs to the top of my playlist in iTunes? I thought thats what it did before but now it automatically adds new songs to the bottom of the list. Not a huge issue but an annoyance.
-
Any function module to change the mode in Planning board
Hi guys, Is there any function module to change the mode in Planning board? I would like to call a custom screen to to chagne the mode since the strandard function cannot show enough info. Thanks.
-
Access Connections 4.52 on A20m with Buffalo Wireless g card
I have an A20m on which I use a Buffalo Wireless 'g' PC card, and have updated to AC 4.52. AC does not see any wireless networks - text 'greyed-out' in menu. Is it at all possible to use AC with this config, or do I have to forget AC if I need to us
-
Cannot display japanese font/character in WTK22
Hi guys, I followed this http://www.devarticles.com/c/a/Java/J2ME_and_Unicode/ instructions but I stil cannot display the japanese character on the screen both with eclipe and wtk22. What seems to be missing with my application? Do I have to install