Godaddy server email support

I am using a curve 9300 with AT&T and am loading my work email address which is through godaddy.com. I am able to send emails just fine, however, incoming mail is taking 3 to 3 1/2 hours to come to the device. My other email addresses work with sending and receiving. The device chooses imap as the email type and I think I need to set it up as a pop email. How do I change the email type and prevent the device from choosing one for me?

I normally don't use the device interface to configure email. Rather, I use my carriers BIS website from a PC/browser. You can find yours here:
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
Then, follow these instructions:
KB10154 How to integrate a POP or IMAP email account through advanced integration
To get to the advanced manual settings, you usually must first give it the correct email address but an intentionally incorrect password...then the checkbox for manual configuration will appear.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

GoDaddy ISP emails quit working 1/5/15 but I made NO changes. What's happened?

I've used Thunderbird for my multiple email accounts for several years with no problem. On 1/5/15, my GoDaddy ISP email account quit working. I got an error message saying the password was incorrect. I hadn't made any changes to it. I tried re-entering the correct password, then checked all my incoming and outgoing server settings. All were correct. Deleted and reinstalled the email account. Same result. To my knowledge all server settings and passwords are correct. Only GoDaddy ISP doesn't work. Gmail accounts work fine. My GoDaddy ISP webmail works fine. I just can't get Thunderbird to work with it. Until 1/5/15, it had worked fine.

multiple machines. single point on all of them would be the router or modem, any new hardware in the mix, or a fix for something from your ISP?
Try '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
I have recently seen issues caused by bank security software and tokens from the US military. Safe mode basically disable all of that sort of stuff so a clean connection can be attempted.

How to make a simple form made with adobe Muse work with Godaddy server ?

Hi
i'm trying to do a little website for my student (excuse my english) and the simple form simply don't work with godaddy server. I put the-email adress and i receive nothing, like nothing happen. I try to place the gdform instead but muse said i can't do that.
Do yu have a simple explication or a way around that thank you very much
the site is www.chbh.org
Josée Bélanger

Hi
Please refer to : forums.adobe.com/docs/DOC-3581 to know, how you may have the forms widget provided with Adobe Muse to work with third party hosting.

Why isnt my godaddy imap email not loading messages?

Why isnt my godaddy imap email not loading messages?

I'm having the same issue, but slightly different - since upgrading to Mountain Lion the Inbox folder doesn't come across. If I right-click on the account and select "Get Account Info", the 'Inbox' folder does not appear in the Mailbox list. I've got a support email into GoDaddy but haven't heard from them yet.
Hey - sorry - I just realized this is an iPhone discussion group. Can't figure out how to delete this post.
Message was edited by: Chuck Konfrst

Can't eprint from exchange server email address

I am unable to eprint from my exchange server email address and I can print from other accounts such as @att.net aacounts. This problem has started in the last week. I have reinstalled the printer and varified the allowed address.
Any ideas?

Hi Rick60422,
Welcome to the HP Support forums. I gather that in the last week or so you have been unable to print emails from your exchanger server email address.
I have included a document here that has trouble shooting steps to take when an ePrint job fails.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Apple Mail changes settings after connecting to a GoDaddy server.

I have set up an account in Apple Mail to connect with an email account on a GoDaddy dedicated server. When I set up the account as an IMAP account everything works perfectly for the first connection to the server.
Immediately after the first connection to the server, I can no longer connect to the server via that Apple Mail account. Furthermore the settings in the account have changed. The incoming port is now 143 instead of 993 and the authentication is MD% instead of password.
GoDaddy insists this is a problem with Apple Mail, though I don't have this problem with any of the other email accounts I have set up in Apple Mail that connect with other servers.
My suspicion is that there is something about the way GoDaddy's server is handling SSL that causes Apple Mail to think that SSL is not working and reset the incoming port to 143, which is what it should be if SSL were not being used.
Note, that the only way I can connect with the GoDaddy server is to delete the account and create a new one with the correct settings. Changing the settings in the altered account does not work.
Thanks,

Try going to Mail/Preferences/Accounts/Advanced and deselecting Automatically detect and maintain account settings. You will need to do this for each account.

Attaching calender to private server email

i cant figure out how to set up my school email on Mail on my mac, so i am wondering if there is a way i can attach a calender to a private server email? also if anyone can tell me how to setup my private server email on Mail, that would be great as well. the address is "[email protected]" and i can receive emails but i cant send emails. i entered "smtp.carroll.edu" for outgoing server but its not working. Thanks for your time.

Have you tried mail.carroll.edu as the outgoing mail server? And have you checked with your technical support people at Carroll to see if it is permitted?
AK

Problems with Email Support

Hello, I have been trying to send a request to email support for two days. I keep getting the following message:
"Sorry, we’re having some problems at the moment."
I have tried sending my message well over 20 times without success. Does anyone know if Email Support actually works? Or, am I wasting my time? Thank you for you help.
Solved!
Go to Solution.

perhaps just a temporarily server issue. for the meantime, you can try sending an email to [email protected], just provide as much relevant details possible for faster handling of your concern.
Here is a link to the instruction on how to contact Skype Customer Service: https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

How to check whether a SMTP server is supporting Authentication or not

Hi All,
We are using Java Mail API 1.3.1/1.3.2 to send the messages. some of the SMTP servers that we use are supporting authentication and some of them are not.
As the SMTPTransport.supportsAuthentication() is not available only in Java mail API 1.4.1, we are identifying the SMTP server whether it is supporting authentication or not in the following way.
Socket clientSocket = null;
InetSocketAddress socketAddress = null;
OutputStream outStream = null;
InputStream inStream = null;
InputStreamReader inReader = null;
OutputStreamWriter outWritter = null;
try
clientSocket = new Socket();
socketAddress = new InetSocketAddress(host, port);
clientSocket.connect(socketAddress, timeout*1000); // convert timeout from second to miliseconds
// 1: now try to execute the given command by passing that on Out-Socket
outStream = clientSocket.getOutputStream();
outWritter = new OutputStreamWriter(outStream);
outWritter.write("ehlo localhost" +"\n");
outWritter.flush();
// 2:Read output of above command
inStream = clientSocket.getInputStream();
inReader = new InputStreamReader(inStream);
// This array limit would be fine to get "AUTH" extension of smtp server.
char[] arr = new char[16384];
StringBuilder strBuilder = new StringBuilder();
inReader.read(arr);
for(int i=0; i< arr.length; i++)
strBuilder.append(arr);
System.out.println(METHOD_NAME + "SMTP server response for ehlo localhost command ->"+strBuilder.toString());
// The output EHLO command comes like below :
// ehlo localhost
// 250-ap9058pc.us.oracle.com Hello ap614ses.us.oracle.com [130.35.33.43], pleased to meet you
// 250-ENHANCEDSTATUSCODES
// 250-PIPELINING
// 250-8BITMIME
// 250-SIZE
// 250-DSN
// 250-ETRN
// 250-AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN
// Since for XATUH ( like internal IP),
// we are not sure, so just checking for AUTH capability.
supported = strBuilder.indexOf("250-AUTH") >=0? true : false;
As shown in above code, we are issuing 'ehlo localhost' command to SMTP server, if the response i. 'strBuilder' contains '250-AUTH' then we are assuming that it is supporting authentication.
But for one SMTP server the 'strBuilder' value is showing as '220 mail.durofelguera.com ESMTP Service (Lotus Domino Release 8.5.2) ready at Thu, 16 Feb 2012 13:57:20 +0100' only which is socket connection output but not 'ehlo localhost' command output.
where as the telnet test output is showing correct only as below
# telnet mail.durofelguera.com 25
Trying 172.20.16.65...
Connected to mail.durofelguera.com.
Escape character is '^]'.
220 mail.durofelguera.com ESMTP Service (Lotus Domino Release 8.5.2) ready
at 0
ehlo localhost
250-mail.durofelguera.com Hello localhost ([172.20.15.209]), pleased to meet
yu
250-HELP
250-AUTH LOGIN
250-SIZE
250 PIPELINING
AUTH LOGIN
The question is why the 'strBuilder' is not showing 'ehlo localhost' conad output where as the telnet test results are showing correctly, what is going wrong here?
Is there any other way to check that whether SMTP server is supporting authentication or not?
Edited by: sarojak on Feb 19, 2012 10:11 PM

There are so many things wrong with your code, it's hard to know where to start...
Basically, the problem is not as simple as you think it is.
For example, some servers might not allow authentication until you've issued
the STARTTLS command.
These days, essentially all servers allow authentication. You're probably better
off just assuming the server supports.

Looking for a client/server that supports multiple protocol and delivery

Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

How do you email Support? They sold me an incomplete TV show file .

They say how easy it is to email Support, but every link just sends me around in circles to pages I've already been to! They say there are "Email Forms" at the bottom of the support pages, but there are only links to more pages I've already been to.
I ordered "Battlestar Galactica" from iTunes, and two of the episodes are cut way short.
Would someone please post a link to an actual way to email iTunes, since they seem to be making it difficult?
Thank you

hi Sammy!
just checking. can you see an email form at the bottom of this FAQ?
iTunes Music Store video FAQ
it should be in a pale blue box below "Ask a video question".
love, b

ICal Server email invitations - how to test and get this feature working

iCal Server email invitations - how to test and get this feature working
Thanks Apple for introducing this nice little feature into iCal but then completely neglecting to write any sort of useful manual that can explain what to do when it doesn't work after you set it up for the first time.
At long, long last we have finally got there after about 6 months of fiddling on and off, so I thought I had better post up the process since many have similar issues and it is hard to ascertain what is going on.
Using an external email server was just a waste of time and it still wouldn't handle the replies properly even though it was supposed to handle '+addressing'. In the end I set up a special gmail account for the iCal server and finally got it working. I list here the process of configuring and testing the system to check that each little stage is working.
Set up a Gmail account in Apple Mail to access and test in the usual way for any email account (e.g. [email protected].);
Set the iCal server email to access the same email using the following settings:
IMAP
SMTP
[email protected]
smtp.gmail.com
Port: 993 [x] Use SSL
Port: 587 [x] Use SSL
User & Pwd
Login
User & Pwd
To test the settings:
send out a test email from Apple Mail to a non-server email address that you can access to check it has been received;
send out a test email from your non-server email account to [email protected] and check that it is received;
this tells you that the GMail account is setup correctly and working
Testing iCal:
I noted that iCal was deleting any emails that arrive in the inBox in Apple Mail as soon as they arrived (this is to be expected);
test that the invites are being sent from iCal by setting an event in iCal and inviting your non-server address (you may not see any sign of this in Apple Mail but you should catch it in the iCal server log and possibly in the Gmail sent mail box);
check that the invite is received at your non-server account and Accept it in iCal on another machine - the reply is automatically sent back;
the replies appear in Apple Mail but are quickly deleted by iCal. But their record for you to see is left in Gmail under 'All Mail';
Accepted invites appear as a notification button on the top left hand bar on iCal where you click to acknowledge them and then the attendee is shown as a green circled tick instead of a grey circled ?.
this shows that iCal invitations are working correctly. Whenever an event is updated, all invitees should be updated by email automatically.
I hope this helps anyone - I could certainly have done with something similar when I started with looking at this.
Anatole
The Error and Access logfile in the Server app under iCal server are very useful in determining any errors. I got lots of imip errors when I didn't quite have the settings right. The port is critical and it won't tell you this is the problem if it fails.

iCal Server email invitations - how to test and get this feature working
Thanks Apple for introducing this nice little feature into iCal but then completely neglecting to write any sort of useful manual that can explain what to do when it doesn't work after you set it up for the first time.
At long, long last we have finally got there after about 6 months of fiddling on and off, so I thought I had better post up the process since many have similar issues and it is hard to ascertain what is going on.
Using an external email server was just a waste of time and it still wouldn't handle the replies properly even though it was supposed to handle '+addressing'. In the end I set up a special gmail account for the iCal server and finally got it working. I list here the process of configuring and testing the system to check that each little stage is working.
Set up a Gmail account in Apple Mail to access and test in the usual way for any email account (e.g. [email protected].);
Set the iCal server email to access the same email using the following settings:
IMAP
SMTP
[email protected]
smtp.gmail.com
Port: 993 [x] Use SSL
Port: 587 [x] Use SSL
User & Pwd
Login
User & Pwd
To test the settings:
send out a test email from Apple Mail to a non-server email address that you can access to check it has been received;
send out a test email from your non-server email account to [email protected] and check that it is received;
this tells you that the GMail account is setup correctly and working
Testing iCal:
I noted that iCal was deleting any emails that arrive in the inBox in Apple Mail as soon as they arrived (this is to be expected);
test that the invites are being sent from iCal by setting an event in iCal and inviting your non-server address (you may not see any sign of this in Apple Mail but you should catch it in the iCal server log and possibly in the Gmail sent mail box);
check that the invite is received at your non-server account and Accept it in iCal on another machine - the reply is automatically sent back;
the replies appear in Apple Mail but are quickly deleted by iCal. But their record for you to see is left in Gmail under 'All Mail';
Accepted invites appear as a notification button on the top left hand bar on iCal where you click to acknowledge them and then the attendee is shown as a green circled tick instead of a grey circled ?.
this shows that iCal invitations are working correctly. Whenever an event is updated, all invitees should be updated by email automatically.
I hope this helps anyone - I could certainly have done with something similar when I started with looking at this.
Anatole
The Error and Access logfile in the Server app under iCal server are very useful in determining any errors. I got lots of imip errors when I didn't quite have the settings right. The port is critical and it won't tell you this is the problem if it fails.

SQL Server 2012 support

Does anyone know of any official statements regarding the running of SharePoint Server 2007 over SQL Server 2012? Or if no official statements, has anyone tried it yet?
Actually, I have the same question with regard to Windows Server 2012, if anyone knows anything about SharePoint Server 2007 support for that as well.
Thanks.

I haven't heard of any news or information from Microsoft about plans for support of SQL Server 2012 or Windows Server 2012 with SharePoint 2007, so the best source that I know to look at is their official TechNet documentation on software requirements for
the platform:
http://technet.microsoft.com/en-us/library/cc262485(v=office.12).aspx. That article states that it is supported on SQL Server versions 2000 through 2008 R2 and Windows Server versions 2003 through 2008 R2, as long as you keep SharePoint 2007 updated to
the proper service packs to support the given version (believe the R2 versions of the 2008 OS and Database engine both require at least SharePoint 2007 Service Pack 2).
There's not any information on the Service Pack 3 that indicates that it includes compatibility with the 2012 releases of Windows Server and SQL Server, so I don't think that's a possibility.
This is just my opinion, but I really don't think you're going to see compatibility with the 2012 releases happening for SharePoint 2007, for a couple of reasons. First, Microsoft's focus is on SharePoint 2010 and potential future releases for the SharePoint
platform. There are a lot of rumblings out there right now that vNext is rapidly approaching on the horizon, and in the past at times like this Microsoft has a track record of really not paying a whole lot of attention to vCurrent -1. The other reason is that
from a business standpoint Microsoft like to structure its software so that when a customer does an upgrade of one platform or system they often have to bring others along for the ride as well. In this case, if you want SharePoint 2007 to use those new OS
and SQL versions you're probably going to have to also upgrade SharePoint to 2010 to get it.
I know it can be frustrating, but that's how Microsoft approaches things and if we want to use their software those are the rules we have to abide by.
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Which version of Ubuntu server is supported as win2012R1 Hyper-V guest ?

I tried to install latest stable Ubuntu to win2012R1 Hyper-V but failed.
Which version of Ubuntu server is supported as win2012R1 Hyper-V guest ?

Ubuntu 12.04 and 12.10
Ubuntu 13.04 and 13.10
http://technet.microsoft.com/library/cc794868%28WS.10%29.aspx
If youre getting correct answer please mark this reply as answer
Darshana Jayathilake

Godaddy server email support

Similar Messages

Maybe you are looking for