Going on using existing time machine backup in a new network

Hello community,
I just set up a wireless network with my new time capsule. As I used to do my time machine backups on an external USB hard drive (Intenso), I connected it to the TC for extending my network space and going on using this volume as my backup-volume.
Unfortunately Time Machine doesn't recognize the Intenso drive as my old backup volume although I did nothing else than plugging it into the TC instead of my Macbook. My Macbook is the same, the OS is the same, the backup drive is the same. Only the port is a different one. I cant understand that Time Machine doesn't recognize my backup only because its now in the wireless network instead of plugged to the USB port.
Is there anything I can do to make time machine going on using my old backup in the network?
Thanks a lot.
Fabian

Unfortunately Time Machine doesn't recognize the Intenso drive as my old backup volume although I did nothing else than plugging it into the TC instead of my Macbook.
Nothing is the same. There is a huge difference here depending on whether a hard drive is connected directly to a Mac......in which case it is a "local" drive.....or if a drive is connected to a device like the Time Capsule.....which is a "network" device.
In other words, if you connect a drive to the USB port on the Time Capsule, the drive becomes a "network" drive.
Time Machine stores backups differently depending on whether the drive is attached as a "local" drive or whether the drive will be connected as a "network" drive. On a "network" drive, Time Machine backups are stored in a special type of container called a sparsebundle.
You can set up Time Machine to back up to the drive connected to the Time Capsule.......but Time Machine will not continue to back up to the same file that was being used when the drive was connected directly to your Mac. Instead, Time Machine will make a new, complete backup and then continue to back up incrementally once the first "master" back up is done.
Obviously, this will require quite a bit more space on the hard drive, since you will have two sets of backups on the drive.
If you want to "see" the backups that were made when the drive was connected directly to your Mac, you will need to connect the drive directly to your Mac and access them that way.

Similar Messages

HT201250 existing Time Machine backups to a new Mac

how do i migrate existing time machine backups to a new mac from my time capsule?

It took a little more research, but that link in the end solved my problem. After mounting the Time Capsule and the previous backup sparsebundle, I ran these commands to inherit the old backup (with <capsule> and <machine> representing the names of the Time Capsule and machine/hard drive respectively:
          sudo tmutil inheritbackup /Volumes/<capsule>/<machine>.sparsebundle
          sudo tmutil associatedisk -a / /Volumes/Time\ Machine\ Backups/Backups.backupdb/<machine>/2012-12-09-114511/<machine>
          sudo tmutil setdestination /Volumes/<capsule>/
"2012-12-09-114511" was the latest snapshot that was there. According to the documentation, you can pick any snapshot, since the "-a" in that command will update all of the associated snapshots.

How to keep using existing Time Machine backup after replacing main hard drive

The hard drive in my iMac (Lion) is failing. I cloned it to a new drive and installed it in the iMac. Now the system wants to start fresh with a whole new Time Machine backup.
It seems obvious that there must be a way to keep using the existing Time Machine backup set, but I can't figure out how to do it. Help, please.

If you had done a full system restore from Time Machine, it would have been done automatically. But 3rd-party cloning apps don't leave a "trail" so Time Machine can figure out that the new drive has all the old stuff on it.
Effective with Lion, there is a way to "associate" the new drive with the backups of the old one, but it requires the use of Terminal. See #B6 in Time Machine - Troubleshooting. As noted though, this only works on directly-connected backup drives, not backups made over a network.

Continue using existing Time Machine backup on new mac

I just had to replace my 13" Macbook Pro through warranty. When I first turned it on I selected to restore the computer from my time machine backup and after several hours it finished successfully with the exception of Ilife which on the restore had to be updated before it would open the restored databases. The other issue I am having is that timemachine is no longer working. I would prefer to have timemachine backup to the existing archive structure it created on the old machine but right now it just says it can not find the volume. Is there a way to keep using the existing backup or do I need to delate the archives and start a new archive?

firemandan900 wrote:
I just had to replace my 13" Macbook Pro through warranty. When I first turned it on I selected to restore the computer from my time machine backup and after several hours it finished successfully with the exception of Ilife which on the restore had to be updated before it would open the restored databases. The other issue I am having is that timemachine is no longer working. I would prefer to have timemachine backup to the existing archive structure it created on the old machine but right now it just says it can not find the volume. Is there a way to keep using the existing backup
If there's room, TM can start a new set of backups for the new Mac on the same disk or Time Capsule. But it will make a new, full backup of the new Mac, so if your TM disk/partition isn't at well over twice the size of the data it's backing-up, your best bet will be to erase the drive with Disk Utility and let TM start over.
There's a downside to that, though. TM on the new Mac won't delete the oldest backups from the old Mac when it needs room for new backups.
Instead, it will delete the oldest backups from the new Mac, leaving the old backups "stranded." Without erasing the TM disk/partition, you'll have to delete the old backups one at a time, via the TM interface, which is quite tedious and time consuming. See the instructions in item #12 of the Frequently Asked Questions post at the top of this forum.
or do I need to delate the archives and start a new archive?
That's probably your best option.

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?

The ne
The new machine has Mavericks which is fine. And I will leave it as is. I don’t want anything from my old machine other than 2 apps that I will need on the new one. I want to be able to install those apps that I bought from the App Store onto my new computer. I assume Apple doesn’t want me to have the apps installed on 2 machines at the same time so I wonder if just uninstalling them from my old machine will release them for re-install on the new one.

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup and external storage as well?

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup as external storage as well for the files I don't need everyday?

If you are using "Restore from Time Machine Backup" option from OS X Recovery, you can only choose from the broad categories presented.
... Can I also use my time machine backup as external storage as well for the files I don't need everyday?
To be clear, if you are asking if you can use the volume containing your Time Machine backup to store additional, non-Time Machine files, the short answer is yes.
It's not a good idea though, since the Time Machine backup will eventually fill all available space, after which it begins to remove old, "expired" backups to make room for newer ones. The presence of additional files doesn't change that fact, and Time Machine will not erase them, but you will encounter a dilemma should you want to store additional files on that volume when there is no remaining space. You will have to make room for them on your own, by deleting existing files. Furthermore, since Time Machine cannot back up its own volume, those additional files will not be backed up by Time Machine.
The easy solution for what you describe is to purchase additional external storage. External USB hard disk drives have become very inexpensive; about $55 will buy a perfectly suitable 1 TB drive.
You can also choose to replace your MacBook Air's internal storage with a larger capacity one. Look for a suitable replacement from OWC / MacSales:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina
That gets a little more expensive but it is the optimum solution.

In the installation process lion will not install as message reads MAC HD 904 gb available this disk is used for time machine backups .What is the next step

After downloading ,completing the lic agreement phase, the next step is where to install and automatically' MAC HD with 904 gb available this disk is used for time machine backups' is shown and installation is blocked .
Any body got any idea what to do next ?

Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain.

"This disk is used for Time Machine backup..."

I bought my MacBook Air in january 2012 and want to install the new Mountain Lion update. I have downloaded it but when I´m supposed to choose where to save it I can't choose the Macintosh HD because "This disk is used for Time Machine backup..."
What can I do?

After 10 days of trying to install Mountain Lion I finally took my IMac t the Apple Store in town. It was still under Apple Care. When I would try to install it I would get a message that this disc (HD) was used by Time Machine. I had read about the Time Machine backup folder some people had mentioned should be trashed. I used "Find" and "Spotlight" and never could find it. My phone calls to Apple Support were non productive. The young lady tech at apple took all of one minute to fix the problem. She simply went to the backup folder which was empty and trashed it. mmediately the Mounain Lion begin the install and problem solved. She said that folder would not show up using Find or Spotlight as they were not to be messed with by the average Joe. It was on the HD but I have forgot how she got to it. The Apple Store was a great experience. You call and make an appointment and take your computer to what they calll the Genius Bar where they have nummerous technicians. They hook it up with you sitting at the Genius Bar as you show them what the problem is and they fix it on the spot in most cases. They will even carry the computer in and out if you need help. They also answered some other tech questions not related to my original problem. They must have the fastest net connection in the world and you are free to walk into the store and use it if you have a big download. On one install it would have taken me 8-10 hours at home while going to the store it took less than an hour. You have a place to put your computer on a bar and a stool to sit on while doing this. No charge of course. I am sure glad I bouhgt Apple Care in this case. A very impressive operation.

External usb disc used for Time Machine backup disconnects when Mac has been into sleep mode

I use a 1Tb External usb disc used for Time Machine backup which works fine, but when the Mac goes into sleep mode & powers back on I get a message stating that you should always eject the Drive before removing.
Any suggestions on how to get around this problem would be welcome

Look at the root of your hard drive for a folder called Backups.backupdb.
Or, a sparse bundle disk image for one of mobile computers that might have tried to back up to your Mac.
If you have those, remove them and try again.

"Disk is used for Time Machine Backups" on My air, HELP!

I am trying to download Mavericks on my mac air. I get almost to the download and it says "Disk is used for Time Machine Backups" I did a backup from my old pro to my new mac air when I got it a month or so back but would that affect it ? Help!

Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain.

Macbook Pro -yosemite install stalls at disc select with ''This disc is used for Time Machine Backups' - help !

Having downloaded Yosemite it installed fine on my iMac but on my Macbook Pro installation has frozen at the Disc Selection stage (where you want it to install) with the message 'This disc is used for Time Machine Backups'.
I cant find a way past this to complete the installation.
Any ideas anyone ?
Many thanks.

Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain.

Re-installed OS X Server who to re-use clients Time Machine Backups?

Hi all!
For some reason one of my disks in my Mac Mini Server stopped working. So I had to re-install OS X Server.
My client, a MacBook Pro, did its backup towards my Mac Mini Server OS X Server. Now I am curious about if OS X Server is able to re-use that Time Machine backup so that my MacBook Pro client can continue to backup to that Time Machine "file"?
Anyone experienced this?
Regards,
Andreas

If you have not modified your MacBook Pro, you should be able to carry on using the Time Machine backup in your Mac mini Server without any problem. Just set up your MacBook Pro to make backups in your Mac mini Server, and your existing backup should be used without any problem

Using old Time Machine backup after clean install of system

I had a system crash on my G4 iBook running Leopard. Based on advice given at the Apple store genius bar, I reinstalled Leopard from an install DVD, reformatting the drive. During the system installation process I used my Time Machine backup to reinstall the former users (but nothing else). I then installed my needed applications. So far so good.
Now I'm in the situation where I have an external drive with the Time Machine backup of the pre-crash iBook, and I'm not sure how to proceed. Do I start over and do a new backup (effectively erasing all my pre-restore data)? Or can the old backup still be used, and added to? While losing the pre-restore time machine data would not be a major loss, it would be kind of nice to have.
Any suggestions? Thanks!
Dan

DanK wrote:
I had a system crash on my G4 iBook running Leopard. Based on advice given at the Apple store genius bar, I reinstalled Leopard from an install DVD, reformatting the drive. During the system installation process I used my Time Machine backup to reinstall the former users (but nothing else). I then installed my needed applications. So far so good.
You didn't want any of your settings, preferences, data, etc.? The +MIgration Assistant+ app will let you do that, for one or more users. And of course, you can use the +Star Wars+ display to restore selected items.
Now I'm in the situation where I have an external drive with the Time Machine backup of the pre-crash iBook, and I'm not sure how to proceed. Do I start over and do a new backup (effectively erasing all my pre-restore data)? Or can the old backup still be used, and added to? While losing the pre-restore time machine data would not be a major loss, it would be kind of nice to have.
Your next backup will be a full one; everything on your internal HD is considered as changed, so will be backed-up again.
If there's room for that, it will just be a large incremental backup, added to the existing ones.
If not, Time Machine will begin deleting your oldest backups, one by one, trying to make enough room for the new backup (the amount on the internal HD plus 20% for workspace). But it won't delete the latest backup -- if that's the only one left, and there still isn't enough room, the backup will fail.
If there is room, the first backup may appear to be very slow; why is not clear, but as long as it's making progress, let it run. Subsequent ones should be normal.

I am trying to install Mavericks on my McbookAir, but it won't install, saying that my hd is used for time machine backups. I have an external HD connected to my mbAir that I'm using for time machine.

2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).

I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD :-( . If it were, I'd delete it!

Unable to use a Time Machine backup

I am getting very frustrated, as I cannot use a Time Machine backup the way I want to.
Short story, my Macbook Pro Retina (running Yosemite) is, and have for a while been, a litte buggy and slow, so I wsh to to a clean install of OSX, and use migration assistant to recover files and settings. I have tried to to a complete restore, but this hasn´t helped.
The problem is, the migration assistant can´t find the backups. When I restart with Cmd+R and prompt a restore from TimeMachine backup, it CAN find both mine, and other backups stored on the disk. But after I do a clean install, and get to the assistant, it CAN´T find any of the backups.
The backups are on a WD 2TB disk, connected via my Mac Mini.
I have tried creating another account on the fresh install, and verify disk and permissions. One time, that actually made the assistant find the backups, but I have never been able to recreate this. I did not try to copy the files on that occation, somehow.
I don´t understand how the two backup modes works differently. Complete restore cand find the files, assistant cannot.
IMPORTANT NOTE: The backups are created via a Mac Mini sharing the Time Machine disk. My backup is created as a disk file on Timemachine/Mybackup, and the Mac Mini backup is another level down on Timemachine/backups/Macmini. I don´t know if this has anythong to do with it.
On trying to recover, I have plugged the external drive directly into the MBP.
I have had to go back and to a complete restore every time, but I am not satisfied with this result.
I have tried to explain as good as I can, and will be very grateful for hints and tips.

A possible reason for backups not to be available in Migration Assistant is that the computer doesn't have a name, or the name is corrupt. Open the Sharing preference pane and check the name. If you can't do that, reset the PRAM. Credit to ASC member Csnote for this observation.
Otherwise, starting from a clean installation of OS X, set up a new administrator account and log in. Enter Time Machine and press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible.* Select the one you want and navigate to your home folder (in the Users folder at the top level of the old startup volume.)
You should now be able to restore your user data. I suggest you do this in two stages. Quit all applications except the Finder before you begin.
Restore all the visible items at the top level of the home folder.
Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
Any other invisible folders or files at the top level of the home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
You may have to reinstall all third-party applications from scratch. That would be the only point of doing a clean installation.
You'll have another problem because you erased the startup volume. The next time you back up, Time Machine won't recognize any files as being the same as they were before, and will make a full copy of all files. There might not be enough space on one or more of the backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set the backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
*If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
Browse Other Backup Disks...
from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of the computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
Show Time Machine in menu bar

Going on using existing time machine backup in a new network

Similar Messages

Maybe you are looking for