GoLive conversion nightmare

I've recently switched to Dreamweaver from GoLive and converted a large site that used GoLive templates. Everything seemed OK until I realized that the title of each page in the converted site started with ""
Looking at the source code for the template I found this:
"<title>PAGE TITLE</title>"
The problem seemed obvious--the template code being inside the title tags--so I went into the template and changed the code to:
"<title>PAGE TITLE</title>"
Unfortunately this results in the following (partial code for the head section):
"<head>
<meta http-equiv="content-type" content="text/html;charset=utf-8" />
</head>PAGE TITLE
<link href="../favicon.ico" rel="shortcut icon" />"
Dreamweaver has moved the ending head tag way out of position (the head section ends many lines below this) and has stripped out the title tags all together. The resulting page does not display properly as various links, such as CSS files, are outside of the head section.
If I return to the template and change the code back to what it was originally it will fix the problem with the misaligned head tag, but I still have the original issue of having template code in the document title. Anyone have any suggestions?

After realizing that another of my GoLive converted sites suffered from the same title problems, I started investigating some more and came up with the following odd workaround/solution:
1. Removed the template regions and title tag from the template
2. Updated pages based on template
3. When asked what to do about content that was no longer in a defined region I moved it to "Nowhere"
4. Opened new pages and confirmed that they did not have titles
5. Realized that Dreamweaver had added the template regions and title tags back into the template, but had put them in AFTER the end of the head section.
6. Moved the template region and title tags back into the head section
7. Updated pages based on template.
8. Manually reentered the titles for pages based on template
This was a workable solution for a small that I used as a test (only 8 pages based off of one template), but I have a site with hundreds of template-based pages that this method will obviously not work well with.

Similar Messages

GoLive conversion to Dreamweaver

I have an existing site that was created in GoLive. How do I move this site and all its assets to Dreamweaver?

Define a site in DW that points into the local root folder for the site. Edit away, and away, and away....

Frame Rate Conversions Nightmare!

Hello Everyone. I'm in a pickle! I have multiple formats and frame rates that I am trying to combine into one project. I have at my disposal an HDW-f500 HDCAM deck and a Kona LHE card. I have projects that include PAL SD, HDV 1080i60, Apple HDV 1080i50, HDV 720p24, and ProRes 1920 1080, and XDCAM 720p24.
This is a global project that I have been charged with combining into one output. I don't know what the final output has to be, but I am looking at moving toward HDCAM 23.98psf. But, if anyone has a contrary suggestion, I am open to it.
So, what is the workflow here? Can I spit each to tape at their respective framerates and then reacapture them all use the Kona LHE to 23.98 ProRes HD? If so, what is the setup required. I am nearly at the end of my rope with this. Any and all help is greatly appreciated

HOLY COW....what a mess! I certainly don't envy you in this task.
You have the wrong capture card for the task. The Kona LHe captures analog, but won't convert 720p to 1080, or 1080 to 720...nor upconvert SD to HD. Only the Kona 3 can do that. But it cannot do any frame rate conversion...no 29.97 to 23.98.
With the Kona 3 I capture at the native rate, then either use Compressor to convert (29.97 to 23.98), or Cinema tools to conform (25 to 23.98). And I capture everything to the SAME codec...DVCPRO HD or ProRes.
Gotta get a Kona 3.
Shane

Golive Conversion WITHOUT Golive Software

Our previous web producer used GoLive and doesn't want to
continue support now that GoLive is going away. (He's a stunning
artist - and is worried he's spending too much time on mechanics
vice art). He's given us all his source files but isn't interested
messing with the GL2DW converter.
Should we start from scratch? There appears to be no add on
tool for DW and the GoLive free demo is also now a thing of the
past.

Ask him to publish the site to some subfolder on the domain,
and to select
the option to strip out the csactions when publishing.
In DW define your site to connect to this subfolder as root.
GET all the
files. You should be pretty OK at that point.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RofBeomax" <[email protected]> wrote in
message
news:g293j4$j9c$[email protected]..
> Our previous web producer used GoLive and doesn't want
to continue support
> now
> that GoLive is going away. (He's a stunning artist - and
is worried he's
> spending too much time on mechanics vice art). He's
given us all his
> source
> files but isn't interested messing with the GL2DW
converter.
>
> Should we start from scratch? There appears to be no add
on tool for DW
> and
> the GoLive free demo is also now a thing of the past.
>

JVC to FCP to Quicktime Conversion Nightmare.

Here is my goal. I recently bought at JVC GZ-HD7U camera. I want to use it to post videos (as quicktime files) online while preserving the original widescreen aspect ratio.
JVC's .TOD files require me to use the VLC player to convert them to a .ts file, and then I have MPEG Streamclip to convert them into something useable in Final Cut.
So, I have a number of questions on several of the steps to finally get it to a Quicktime file I can upload to the internet.
1. JVC's HD dimensions are 1920 x 1080i. What are the ideal settings to use when using MPEG Streamclip to convert the file that will preserve the aspect ratio and also avoid needing to render the entire clip in Final Cut Pro before I edit? Right now I think I'm getting crossed up between my sequence settings and my clip settings, and I can't get them to match up.
2. The closest I got was using the DV/DVC PRO codec that required no rendering, but then when I tried to convert it into a quicktime file it got squeezed in from the sides -- eliminating the widescreen aspect ratio. Is there a specific setting I need to get letterboxing in my Quicktime file?
I think we'll start there. Any ideas?

Apple wants you to use Compressor 2 for this now. Also, you may note that AC3 encoding is also handled by Compressor 2 instead of A.Pack. This article explains the MPEG-2 change: http://docs.info.apple.com/article.html?artnum=301871
-DH

CS2 Doc Converted to CS3 takes 2+ Minutes to Open Every Time

We are in the process of switching 34 users from ID CS2 to ID CS3 and are having file conversion nightmares. They need to re-use their old CS2 ad layouts but many users are complaining that the conversion to CS3 takes several minutes. In our test period we had noted that but once the doc was converted the subsequent file opening time in CS3 was greatly reduced. But it now appears that when some users are opening the converted and saved docs they are still experiencing the same file opening delays as when the docs were being converted from CS2. Then a different user will open the same doc and it will open immediately. We have tried to find a common setup or preference or plug-in issue that might be a problem, but so far have struck out. 6 users have brand new MacPros running Leopard 10.5.2 with all Adobe CS3 patches installed. This group uses identically configured everything and they still have inconsistent file opening behavior! Some open instantly and others take 2-5 minutes for the same file. We have noted similar inconsistency amongst our users who still have GS PowerMacs running Tiger 10.4.11. Their CS3 is patched and fully updated. Now I would expect there to be inconsistencies between the Tiger and Leopard G5 and Intel groups, but we see the same thing with the same file taking different amounts of time to open after having been converted and saved and then opened again with the same-configuration users, no matter what they are using.
We use a Xinet file and print server and all users are supposed to work on files off the server so the working file stays up to date, but for testing we have been having them download the same files to their desktops and opening them. One of my test Macs is an Intel Mac running Tiger 10.4.11 and Adobe CS3 all updated and I use the same 3rd party plug-ins as everyone else. We only use two sets of 3rd party plug-ins - the Xinet WebNative and FullPress plug-ins and Extensis Suitcase X1 client Auto-Activation plug-in getting fonts from a Suitcase server.
We don't have the problem if documents are created from scratch in CS3. Unfortunately, it will take a very long time to get to where we would never be using any of our old CS2-created files, so we need to figure out a workable solution. It is mainly a question of time, which is something you never have enough of before your press deadline and the users are balking at the amount of production time they are losing waiting for files to open. They have a tendency to force-quit InDesign before it can finish opening and then they have to deal with all the file recovery dialogues the next time. They are getting very frustrated.
Has anyone run into this behavior or come up with a solution? If so I'd love to hear from you!
Thanks, Laura K.

Hi Kevin,
I did some more trial and error testing since I posted my original message. This is what seems to be working:
You can leave the Suitcase Auto Activation plug-in there, but if you go into its preferences make sure the box for "Activate fonts in embedded objects" is not checked.
That made all the difference - so far. I need to try this on a couple more of my troubled Macs before I will declare victory!
In the Suitcase Client prefs you should also turn off Suitcase's auto activation and let the application plug-in handle that. I read that somewhere else a couple days ago, maybe it was the Extensis forums? Can't remember. But that's how I have mine set on my test Macs. (one MacPro running Tiger and a MacBook Pro running Leopard)
Hope that helps!
Laura K.

Mac Conversion for CS5 Nightmare

After seeing the FCP Supermeet at NAB this year I decided to make the switch to CS5.5
I took the following Mac and made these changes to upgrade the Mac in prep for CS5.5:
Intel Mac 3,1 Quad Core 2008
3Ghz
Up'ed the Ram to 32Gb DDR2
Clean Install (Erase/Reformat) 320Gb 7200RPM Operating System Drive and installed 64 bit Snow Leopard
Installed updates to make Snow Leopard 10.6.7 version
Installed base driver for new Quadro 4000 for the Mac graphics card (because of Apple partial support you have to use an older graphics card to install this driver BEFORE you install the Quadro 4000 physically)
Physically installed the Quadro 4000
Installed the Cuda driver
Updated the Cuda driver to current driver using the Cuda Panel interface
Installed CS5.5 from DVD disc set
Have separate 750Gb 7200RPM media drives
Have an external 600mbps read/write dual channed 0 Raid array for media as well
NIGHTMARE!
Can barely play 1 track of h.264 video/audio on an HDSLR timeline preset
Can barely play 1 track fo video/audio on XDCAM EX 720p 24fps that comes with Adobe CS5 Classroom in a Book
Playback stutters and drops frames, audio glitches even when Playback Resolution is dropped down to 1/2 and 1/4 resolution
I have used both the Playback with Mercury and GPU acceleration and Mercury Engine Software only - same resulting stuttering playback
Watching graphical CPU usage when playing back single track and there seems to be plenty of headroom
Media is stored on drive and raid separate from operating system drive. Scratch drive is on drive separate from Op Sys drive
The only out of spec component with this Mac is I am missing "Core Audio sound card"
But I have seen all sorts of Mac laptops running multiple tracks of HD with all kinds of effects applied and they played/scrubbed through the composition like butter.
Any idea - this MacPro tower with 32Gb and Quadro 4000 cuda card should tear it up with CS5.5

All our other edit bays are still at 32bit Leopard and are on jobs.
We pulled this one and did the noted conversion that we are having the problems with.
I guess your testing is both good news - the 3,1 model CAN be converted over and do a decent job.
I assume your co-worker's 3,1 had a Quadro 4000 for the Mac graphics card?
No choppy dropped frames at 1/2 or 1/4 playback resolution?
Bad news is the only idea I have left is start all over again and see if that changes it.
One new item to note, this morning on boot-up, when opening the "About this Mac" panel, the internal bong sound starts going off repeatedly (as if you are holding down a keyboard key continuously. And the scroll bars could not be used - when you drag one down and let go, they pop back up to the top. The only way to stop this all was to re-boot.
Yesterday I re-installed FCP and that gave me back the codec for nanoFlash XDCAMHD 422 files (and probably a lot of other missing codecs).
I then opened up a matching sequence in Premiere CS5.5 and was able to import one of these files now - so your advice on the missing codec helped here.
But when I placed this file on the timeline - video only - no audio, it stuttered and dropped frames no matter what resolution used for playback,
Then, here is the most telling thing, I rendered the "entire workspace" (1 clip of video only - 20 secs in length) it took 2mins/52 seconds with all 8 cores maxing out to render it.
I then got the green line above the video in the timeline - AND STILL THE VIDEO PLAYED BACK STUTTERING AND DROPPING FRAMES EVEN THOUGH RENDERED!!
That seems to indicate I either have something wrong with the video card or it's drivers? And maybe this morning's boot up demonstrates that as well?
What do you folks think?
Thank you so much Todd for making the extra effort to help with my problem.
So anyone following this issue, it appears to not be a CS5.5 issue - but an issue with my individual machine - or graphics card or driver. Would be interested to know what graphics card and drivers you folks were using for this test.

No images in GoLive pdf conversion

I'm setting up a webpage in GoLive and am trying to create a pdf to print out for others to review. When I convert to pdf, the images that I have placed in the page do not appear in the pdf--I just get an empty box where the image should be. The images are linked from the web, not my hard drive. Is there a way to make the images appear in a pdf?

Hi,
What is the version of PowerPoint and Acrobat you are using?
Please make sure that you have updated the Acrobat to its latest version. Go to Help -> Check for Updates.
Also, try printing the PPT to Adobe PDF printer and then check the issue.
Regards,
Anoop

NIghtmare - Brand new S230u from major retailer: Lenovo says warranty expired

I just purchased a new (sealed) Lenovo S230u factory box with security tape on both ends unopened, with no additional tape, from a major online retailer that also have physical stores in selected States.
It is a refurnished machine, according to the major retailer website, it has 90 days warranty from Lenovo with Levono phone number etc. Having bought several 1000+ Thinkpad and 3000 desktop from IBM, with the *very good* price offered and manufacture warranty, I am willing for the first time to try out the Thinkpads after it is owned by a Chinese company Lenovo. I had been very skeptical whether the Chinese company Lenovo would provide the same level of support as IBM. And this is where the nightmare begins.
I called and checked with the online retailer and they had a few hundred machines but I bought one of the last one they have in stock since it went to SOLD OUT within hours. I confirmed with them they are factory refurnished machines and they had hundreds of them. With the low price and short warranty, I made sure I have the ability to purchase extended warranty and went to Levono online chat for warranty to confirm how much it would cost to buy extended warranty and that shipping for any needed service is free BOTH ways. My last machine was HP and I loved how they provided two way free shipping and excellent technical support service. HP helped me fix an unexpected motherboard issue, deemed manufacturer’s defect and replaced it for free. No way I am buying any laptop with worse off warranty for a cheap price. The agent confirmed that I will be able to buy extended warranty with 2-way free shipping but need to receive the machine and give them the serial no. for a quote.
I felt safe, guaranteed by BOTH the online retailer and Lenovo and went ahead with my purchase.
Having read online discussions, I am very cautious to buy refurnished machines sold on eBay, non-major retailers that may switch off parts and discredit the warranty. I still checked that machine came with security tape sealed on both ends, nothing was altered.
However, when I started using the machine, I realized that it said my warranty expired! I called Levono immediately and the first agent gave me the lenovo_pop email address to send in my warranty and told me they can update and extend it for a year - I thought WOW, great if it is one year. I had tech issues as I performed a series of windows, lenovo, microsoft updates randomly, and getting some registry error message and wanted tech support to guide me quickly to restore to factory condition but the request was denied because warranty expired! Furthermore, he said they do NOT honor any warranty of refurnished machine NOT sold by lenovo.com! WHAT??? That is NOT what they informed me from online support BEFORE i purchased the machine!! And if my warranty end date is AFTER the day I called, they could have easily helped me? The machine expired 1/14/2014 (a year from manufacturer’s date) and I bought it beginning of Feb 2014. Oh great, I guess the few hundred customers that bought the same machine a few weeks before me won’t have this problem as I bought the last few machines – no wonder the cheap price for a wonderful laptop.
This issue was stretched out for weeks! With my case no. CLOSED – reason: no customer contact, when I was waiting for the agent who promised to call me back AFTER I emailed to Lenovo my proof of purchase twice to different emails - yet no one called. An agent then told me new info saying that the major retailer should be responsible to contact Lenovo. Then another agent said they don't honor any third party refurnished machine, even major retailers!! Another case no. opened and a supervisor escalated to a different Lenovo team with screen captures of links to retailer product page, warranty info, as well as my conversation with the Lenovo rep, yet I still receive no resolution 10 days after. This is night and day experience compared to previous IBM or HP experience I had. All contradicting info and the customer penalized.
With the major retailer, I have escalated the issue twice to supervisors, yet the Lenovo closed the first case no. when Lenovo supposed to call me back and the retailer couldn't do much while I still didnt' hear back from the second supervisor but they extended my 14 days return policy to 30 days. Their name not mentioned yet, because unlike Levono, the low level support person called me daily to follow up while I have been chasing after Lenovo every few days and know it would be ignored if I don’t keep pushing it.
This is madness, and if for the diligent cautious buyer I am, this is what I go through from a major online retailer, I can not imagine what a normal buyer would go through. Loyal customers should NOT be the ones who pays for this.
I sincerely hope something can be resolved within a day before my extended return date expired and a senior forum administrator can help me. If not, at least loyal and potential customers would know that things like this could happen and consider this before you buy a refurbished levono anywhere other than Lenovo, and you can be the judge whether Lenovo and it’s policies are worth supporting.
To be honest, I loved IBM, I love my new laptop and I just want the technical support I deserve to check on some potential driver issue and windows 8.1 upgrade support. I want to be able to perhaps buy the extended warranty that was promised. The peace of mind. Now I even have doubt about the company and whether to spend extra money for protection that does not protect customers! To be fair, 90% of the many agents/supervisor I talked to have been professional and helpful which made the process tolerable. The reason I waited so long to post this message on a public forum. It just seems like their system, policies and communication between departments are ridiculous and customers are penalized for it. If you don’t honor ANY third party refurbished warranty - deal with your wholesale agents, retailers, don't sell new or refurbished machines to them. Your loyal customers should NOT be penalized for it and make sure that customers are well informed if they do simple research! Information across departments should be consistent. And the supervisors of the departments should be able to honor and fix a mistake related to wrong info (if it was wrong) provided by another Lenovo department and handle things in a TIMELY manner. I should not have to spent over 15 hours on this for nearly a month! This is NOT what I expect from a top computer company in the US market. Something needs to be done so other loyal customers do not have to go through this and also ensure that customers who support Lenovo would NOT fall into traps of dishonest merchants.

wabibi,
Thanks for the additional details via private message. My apologies for the troubles you have had so far - let's look into the situation and see what can be done to help you get this resolved.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Envy x360 battery short and CMOS/RTC | No dedicated CMOS battery = Kafkaesque HP support nightmare

Relevant Case Number:
3015038426
Caveat:
If I'm wrong about this, I'll eat my hat with a sauce made of ultra-expensive brand-name HP ink.
Question:
Does anyone at HP want to take reponsibility for a series of the company's tech support representatives giving horribly wrong hardware information, wasting customer time and money?
Summary:
1. I have apparently experienced a short in my main battery.
2. In the x360, the real-time clock (RTC) and BIOS settings are apparently powered by the main battery, not a separate CMOS/RTC battery.
3. (1) and (2) explain why my symptoms include a CMOS checksum error and 0-set RTC on boot.
4. Three separate HP representatives have been absolutely insistent that:
(a) I have a CMOS/RTC battery that just isn't disclosed in the service manual.
    (b) My symptoms indicate the need for CMOS/RTC battery replacement.
    (c) This requires a 2-week+ send-in service, even though I live right next to an authorized support center.
    (d) A much less intrusive main battery replacement could not help me, since I have a CMOS issue.
5. I have already had to pay $54 and change for a local shop to confirm that HP support has been, for want of better terms, full of it -- they have been BSing me by phone and live chat, and there is no dedicated CMOS battery.
6. Because of HP's intransigence, I now face the choice of either
    (a) paying another $54+ to get myself a new main battery on the open market
         or
    (b) completely unnecessarily going without my primary work machine for weeks in order to get a new main battery for free from HP. That's assuming that the people at the service center know that replacing the motherboard won't do anything for this machine.
Hilarious and/or Depressing Support Record:
1. Symptoms
This is an HP Envy x360 15t hybrid notebook, model u011dx (G6T85UA).
It had been suspended but suddenly appeared off. It would not power on until AC power was attached.
It showed a CMOS checksum error (502) on boot, and its real-time clock did not hold the time between power cycles.
It had inconsistent problems with failed or severely delayed POST completion.
If AC power was removed during operation, it immediately died. Information about the main battery still showed up in the OS, where it appeared fully charged but never discharged at all.
The light next to the AC plug would often blink blue depending on the power state.
The machine could POST normally (except for the CMOS and RTC failures) with the main battery physically detached.
2. Call ("Amit")
I don't have a transcript of my initial call with HP ("Amit"), but here is the gist of it. My 502 CMOS checksum error implicates the CMOS battery. My steps are to attempt a BIOS upgrade. Failing that, the computer would need to be sent in for service so that the CMOS battery could be replaced. Amit described it to me as the shape of a small tablet.
3. False Hope
When I had initially called, the case was off of the PC and both sides of the motherboard were accessible so that I could try to see if there were any visually obvious problems with the CMOS/RTC battery. Naturally, I couldn't find it, and I had hoped the call would help me. In any case, Amit would need to call back in 60-90 minutes after I had the chance to take care of other things and re-connect the machine's components so that I could boot it and do a BIOS upgrade.
Just before he called back, the machine appeared for one or two power cycles to have overcome its problem. It even seemed like it was drawing main battery power for a few moments during a session with AC power detached. Amit closed the case for me pending the problems recurring.
I concluded that one of the following two things must have happened. Either:
    (a) All of the problems were related to the main battery, and the main battery connector had just gotten jarred loose so that one or two pins were not contacting properly. By disconnecting and reconnecting the main battery in my search for the RTC/CMOS battery, I had solved the issue by reseating it properly.
or
    (b) All of the problems were related to the CMOS battery. But by having it on AC power for testing for a little while, I had charged the CMOS battery enough to enable POST and for it to mediate the transition from AC to battery power (I know this probably isn't how it should work, but hey).
I also updated the BIOS to the newest version so that I could ensure I was following the pre-shipment troubleshooting step set out by Amit.
Fairly quickly after the second call and the closing of the case, all of the symptoms recurred. I carefully re-checked and re-seated the main battery to rule out (a) above. I then decided to run the computer on AC power for several hours to test theory (b) above. When this failed, I went back to the HP site and opted for chat support.
4. First Chat (KARISHMA BARPANDA)
Gist:
I clearly have a problem with my invisible CMOS battery. Also, this CMOS battery is absent from the manual because it isn't supposed to be user-removable, not because it doesn't exist. Note especially the exchange at 2:02.
Transcript:
Spoiler (Highlight to read)
1:38 PM  Support session established with KARISHMA BARPANDA.
1:38 PM  KARISHMA BARPANDA: Welcome to HP Customer Support & Services for Notebook support. My name is Karishma and I will be your technical support specialist today.
1:38 PM  KARISHMA BARPANDA: Hi
1:38 PM  KARISHMA BARPANDA: How are you doing today ?
1:38 PM  Adam Colligan: Hello; this is related to case 3015038426
1:38 PM  Adam Colligan: I'm good; just a little confused
1:39 PM  Adam Colligan: PC symptoms implicated RTC battery: CMOS checksum error on boot. But also instant death when AC power removed. Temporarily resolved after re-seating main battery cable, so chalked up to that. Now not so sure: maybe I had just partly charged RTC battery during testing. Now trying long run on AC to rule this out.Query: x360 service manual (unlike other Envy manuals) makes no mention of RTC/CMOS battery. Didn't see one exposed on board. Can you verify presence and location of CMOS batt?
1:40 PM  Adam Colligan: Just to clarify: I'm not asking you to walk me through changing a CMOS battery or anything like that -- I know you want notebooks sent in for service if they need that officially. But I just want to make sure that I actually know where the thing is on this model
1:42 PM  KARISHMA BARPANDA: I am sorry, I can't understand you.
1:43 PM  Adam Colligan: Okay, I'll back up. Have you heard of something called a CMOS battery or an RTC battery?
1:43 PM  KARISHMA BARPANDA: Yes.
1:44 PM  Adam Colligan: Would you be able to find out where it is located on my Envy x360 15t notebook (u011dx)?
1:45 PM  KARISHMA BARPANDA: Alright !
1:46 PM  KARISHMA BARPANDA: In this situation, we need to take the notebook in free servics repair.
1:46 PM  KARISHMA BARPANDA: Please, provide me the complete sdhipping address along with the zip code.
1:46 PM  Adam Colligan: It is not confirmed yet that the CMOS battery is actually the problem
1:47 PM  Adam Colligan: I don't want to set up a service yet. I just want to know *where* the battery is attached to the board.
1:47 PM  KARISHMA BARPANDA: We need to replace the CMOS battery,
1:47 PM  Adam Colligan: How do you know that we need to replace the CMOS battery?
1:48 PM  KARISHMA BARPANDA: Because tHe CMOS battery is not removable.
1:48 PM  Adam Colligan: Well, in that case we're probably talking about replacing the whole motherboard. Do you mean *not removable* or just "not user removable" ?
1:48 PM  KARISHMA BARPANDA: We will take the notebook in service reapir and our HP certified technician will do the complete hardware diagnostic of your notebook.
1:49 PM  Adam Colligan: I don't want to do anything yet except *LOOK* at the board and see if there is anything obviously wrong with the CMOS battery connection
1:49 PM  Adam Colligan: I just want to know *where* it is; I don't need to actually do anything to it
1:50 PM  KARISHMA BARPANDA: Let me explain.
1:51 PM  KARISHMA BARPANDA: Let me check.
1:52 PM  KARISHMA BARPANDA: Please, allow me few moments.
1:52 PM  Adam Colligan: Thank you
1:56 PM  KARISHMA BARPANDA: Thank you for staying connected. I appreciate your time and patience.
1:56 PM  KARISHMA BARPANDA: I am sending you a link, please go through page number 33 and 34.
1:56 PM  KARISHMA BARPANDA has sent a link: http://h10032.www1.hp.com/ctg/Manual/c04513489
1:57 PM  Adam Colligan: That's okay; I understand that it may take time
1:57 PM  KARISHMA BARPANDA: CMOS battery is not a customer replaceable part.
1:58 PM  Adam Colligan: 33 and 34 refer to the main battery, not the CMOS battery
1:58 PM  Adam Colligan: I know that the CMOS battery is not a customer replaceable part. However, I want to visually inspect it.
1:59 PM  KARISHMA BARPANDA: It is not listed there.
1:59 PM  Adam Colligan: Exactly. Compare that to this manual for the HP Envy 17, page 41
1:59 PM  Adam Colligan: http://www.hp.com/ctg/Manual/c02160120.pdf
2:00 PM  KARISHMA BARPANDA: If you are facing any issues with the battery then, we need to take the notebook in service reapir and will fix the issue.
2:01 PM  Adam Colligan: Sigh.
2:02 PM  Adam Colligan: Look, here is a theory. What if this PC does not have a separate CMOS battery, and it's been using power from the main battery to keep the clock and BIOS settings current? In that case, the symptoms might just be a result of poor seating of the main battery cable. To rule that out, I would like to confirm for a fact that a CMOS battery actually exists on this motherboard, and I'd like to see it with my own eyes.
2:02 PM  Adam Colligan: ...before I go without my PC for days or weeks
2:03 PM  KARISHMA BARPANDA: The CMOS battery exsist in the motherboard and it is not a customer replaceable part.
2:04 PM  KARISHMA BARPANDA: You cannot see it.
2:04 PM  Adam Colligan: So where on the motherboard is it?
2:04 PM  Adam Colligan: It's on the motherboard but it's invisible?
2:04 PM  Adam Colligan: Maybe it's under a piece of foam by the HDD indicator light? There aren't many places for it to hide
2:05 PM  KARISHMA BARPANDA: I would suggest you to sent the notebook in service repair, and if there will be any hardware issues, then HP technician will take care of it.
2:06 PM  Adam Colligan: Please answer this question honestly for me. Is the location of the CMOS battery actually available to you? It's okay for you to say, "I don't know where it is, and I don't know how to find out where it is". But it seems like you are avoiding saying that.
2:10 PM  KARISHMA BARPANDA: Let me know are you facing any issues with the HP notebook right now ?
2:11 PM  Adam Colligan: Yes. Why won't you answer that question?
2:24 PM  KARISHMA BARPANDA: I would like to inform you that, the CMOS battery is not a customer replaceable part.
2:24 PM  Adam Colligan: What does that have to do with whether or not you know where it is?
2:24 PM  Adam Colligan: Is there some rule that you are not allowed to say "I don't know" ?
2:24 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.
2:25 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.
2:25 PM  KARISHMA BARPANDA: The CMOS battery can be replaced by the HP hardware engineers.
2:26 PM  KARISHMA BARPANDA: So, the CMOS battery can be replaced only in our service center.
2:26 PM  KARISHMA BARPANDA: Do you want to send your notebook for a free service to replace the CMOS battery ?
2:26 PM  Adam Colligan: I think we've established that. I am not asking you about how to replace it. I'm asking if you can find out where it is.
2:26 PM  Adam Colligan: It's perfectly alright if the answer is "I don't know", but I do expect that amount of honesty
2:26 PM  KARISHMA BARPANDA: No, it is not listed in the manual.
2:27 PM  KARISHMA BARPANDA: I can understand your concern.
2:27 PM  KARISHMA BARPANDA: As, it is not listed in the manual, let me know how can I assist you.
2:28 PM  Adam Colligan: So then the next question is: can I contact a technical support professional who can tell me where it is attached so that I can visually inspect it before committing to a service by mail?
2:30 PM  KARISHMA BARPANDA: This is the only technical support and you can contact our voice technical support. However, they will tell you the same thing, which I have told you.
1:38 PM  Support session established with KARISHMA BARPANDA.1:38 PM  KARISHMA BARPANDA: Welcome to HP Customer Support & Services for Notebook support. My name is Karishma and I will be your technical support specialist today.1:38 PM  KARISHMA BARPANDA: Hi1:38 PM  KARISHMA BARPANDA: How are you doing today ?1:38 PM  Adam Colligan: Hello; this is related to case 30150384261:38 PM  Adam Colligan: I'm good; just a little confused1:39 PM  Adam Colligan: PC symptoms implicated RTC battery: CMOS checksum error on boot. But also instant death when AC power removed. Temporarily resolved after re-seating main battery cable, so chalked up to that. Now not so sure: maybe I had just partly charged RTC battery during testing. Now trying long run on AC to rule this out.Query: x360 service manual (unlike other Envy manuals) makes no mention of RTC/CMOS battery. Didn't see one exposed on board. Can you verify presence and location of CMOS batt?1:40 PM  Adam Colligan: Just to clarify: I'm not asking you to walk me through changing a CMOS battery or anything like that -- I know you want notebooks sent in for service if they need that officially. But I just want to make sure that I actually know where the thing is on this model1:42 PM  KARISHMA BARPANDA: I am sorry, I can't understand you.1:43 PM  Adam Colligan: Okay, I'll back up. Have you heard of something called a CMOS battery or an RTC battery?1:43 PM  KARISHMA BARPANDA: Yes.1:44 PM  Adam Colligan: Would you be able to find out where it is located on my Envy x360 15t notebook (u011dx)?1:45 PM  KARISHMA BARPANDA: Alright !1:46 PM  KARISHMA BARPANDA: In this situation, we need to take the notebook in free servics repair. 1:46 PM  KARISHMA BARPANDA: Please, provide me the complete sdhipping address along with the zip code. 1:46 PM  Adam Colligan: It is not confirmed yet that the CMOS battery is actually the problem1:47 PM  Adam Colligan: I don't want to set up a service yet. I just want to know *where* the battery is attached to the board.1:47 PM  KARISHMA BARPANDA: We need to replace the CMOS battery, 1:47 PM  Adam Colligan: How do you know that we need to replace the CMOS battery?1:48 PM  KARISHMA BARPANDA: Because tHe CMOS battery is not removable. 1:48 PM  Adam Colligan: Well, in that case we're probably talking about replacing the whole motherboard. Do you mean *not removable* or just "not user removable" ?1:48 PM  KARISHMA BARPANDA: We will take the notebook in service reapir and our HP certified technician will do the complete hardware diagnostic of your notebook. 1:49 PM  Adam Colligan: I don't want to do anything yet except *LOOK* at the board and see if there is anything obviously wrong with the CMOS battery connection1:49 PM  Adam Colligan: I just want to know *where* it is; I don't need to actually do anything to it1:50 PM  KARISHMA BARPANDA: Let me explain. 1:51 PM  KARISHMA BARPANDA: Let me check. 1:52 PM  KARISHMA BARPANDA: Please, allow me few moments. 1:52 PM  Adam Colligan: Thank you1:56 PM  KARISHMA BARPANDA: Thank you for staying connected. I appreciate your time and patience.1:56 PM  KARISHMA BARPANDA: I am sending you a link, please go through page number 33 and 34.1:56 PM  KARISHMA BARPANDA has sent a link: http://h10032.www1.hp.com/ctg/Manual/c045134891:57 PM  Adam Colligan: That's okay; I understand that it may take time1:57 PM  KARISHMA BARPANDA: CMOS battery is not a customer replaceable part. 1:58 PM  Adam Colligan: 33 and 34 refer to the main battery, not the CMOS battery1:58 PM  Adam Colligan: I know that the CMOS battery is not a customer replaceable part. However, I want to visually inspect it. 1:59 PM  KARISHMA BARPANDA: It is not listed there. 1:59 PM  Adam Colligan: Exactly. Compare that to this manual for the HP Envy 17, page 411:59 PM  Adam Colligan: http://www.hp.com/ctg/Manual/c02160120.pdf2:00 PM  KARISHMA BARPANDA: If you are facing any issues with the battery then, we need to take the notebook in service reapir and will fix the issue. 2:01 PM  Adam Colligan: Sigh.2:02 PM  Adam Colligan: Look, here is a theory. What if this PC does not have a separate CMOS battery, and it's been using power from the main battery to keep the clock and BIOS settings current? In that case, the symptoms might just be a result of poor seating of the main battery cable. To rule that out, I would like to confirm for a fact that a CMOS battery actually exists on this motherboard, and I'd like to see it with my own eyes.2:02 PM  Adam Colligan: ...before I go without my PC for days or weeks2:03 PM  KARISHMA BARPANDA: The CMOS battery exsist in the motherboard and it is not a customer replaceable part. 2:04 PM  KARISHMA BARPANDA: You cannot see it. 2:04 PM  Adam Colligan: So where on the motherboard is it?2:04 PM  Adam Colligan: It's on the motherboard but it's invisible?2:04 PM  Adam Colligan: Maybe it's under a piece of foam by the HDD indicator light? There aren't many places for it to hide2:05 PM  KARISHMA BARPANDA: I would suggest you to sent the notebook in service repair, and if there will be any hardware issues, then HP technician will take care of it. 2:06 PM  Adam Colligan: Please answer this question honestly for me. Is the location of the CMOS battery actually available to you? It's okay for you to say, "I don't know where it is, and I don't know how to find out where it is". But it seems like you are avoiding saying that.2:10 PM  KARISHMA BARPANDA: Let me know are you facing any issues with the HP notebook right now ?2:11 PM  Adam Colligan: Yes. Why won't you answer that question?2:24 PM  KARISHMA BARPANDA: I would like to inform you that, the CMOS battery is not a customer replaceable part.2:24 PM  Adam Colligan: What does that have to do with whether or not you know where it is?2:24 PM  Adam Colligan: Is there some rule that you are not allowed to say "I don't know" ?2:24 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.2:25 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.2:25 PM  KARISHMA BARPANDA: The CMOS battery can be replaced by the HP hardware engineers.2:26 PM  KARISHMA BARPANDA: So, the CMOS battery can be replaced only in our service center.2:26 PM  KARISHMA BARPANDA: Do you want to send your notebook for a free service to replace the CMOS battery ?2:26 PM  Adam Colligan: I think we've established that. I am not asking you about how to replace it. I'm asking if you can find out where it is.2:26 PM  Adam Colligan: It's perfectly alright if the answer is "I don't know", but I do expect that amount of honesty2:26 PM  KARISHMA BARPANDA: No, it is not listed in the manual.2:27 PM  KARISHMA BARPANDA: I can understand your concern.2:27 PM  KARISHMA BARPANDA: As, it is not listed in the manual, let me know how can I assist you.2:28 PM  Adam Colligan: So then the next question is: can I contact a technical support professional who can tell me where it is attached so that I can visually inspect it before committing to a service by mail?2:30 PM  KARISHMA BARPANDA: This is the only technical support and you can contact our voice technical support. However, they will tell you the same thing, which I have told you.
5. I pay money to have the CMOS battery checked
Clearly, I wasn't inspired by that chat. Maybe the rep was just wrong about the hardware. More likely, it was just my own ignorance that kept me from finding the CMOS battery, and so I would benefit from a real technician checking it, maybe replacing it or telling me I really did need to send it to HP for service, and also looking at the main battery circuit.
A couple of hours and $54.13 in diagnostic fees later, I had my answer from the technicians. My main battery had a short in it and needed to be replaced. There is no dedicated CMOS / RTC battery on this motherboard. The clock and BIOS use main battery power, and it makes perfect sense that the main battery fault would therefore include symptoms normally associated with a simultaneous failure of a main battery and a dedicated CMOS battery in another computer. This PC is not unique in lacking a dedicated CMOS battery. I could buy a new main battery for around $55.
Obviously, I was now thoroughly upset at HP Support. With this clearly being a main battery issue and the main battery being easy for me to replace and covered by warranty, HP could just send me a new main battery. I wouldn't even care if they wanted to tell me that swapping it myself would void the rest of the warranty period -- better than going without my PC for weeks on end. Failing that, I would probably rather even pay the money for a new battery from a retailer rather than go through the stupidity of sending this PC in just to have the battery swapped out. But now I had already paid the equivalent of that new battery cost just to get the correct information about my hardware, solely because official HP Support had given me false information -- twice!
6. Second chat ("Justine")
Gist:
So I re-connected with technical support in the hope that something could be done to make the situation right. I briefly summarized the problem and gave the case number in the webform submission not shown. Make sure you're sitting down for this transcript and have either whisky or popcorn depending on whether you work for HP or not.
Note in particular at 5:28, where my soul tries to escape my body, and 6:00, where Justine accidentally states the whole issue without actually understanding.
Transcript:
Spoiler (Highlight to read)
5:10 PM  Support session established with Justine.
5:10 PM  Adam Colligan: Hi Justine
5:11 PM  Justine: Thank you for contacting the HP Customer Support & Services. My name is Justine and I will be your chat support specialist today. Please give me a few minutes while I review your issue description details. NOTE: For security reasons, PLEASE DO NOT send credit card information via chat. Also, If you are using a mobile device (iPad, iPod, iPhone, etc....) and experience difficulties viewing the chat window, please initiate a new chat from a Windows or Mac computer or use a different browser for better compatibility.For DISCONNECTED or failed to reconnect, we keep records for all interactions feel free to initiate another chat.
5:11 PM  Justine: May I have the phone number and e-mail address associated with your HP product?
5:11 PM  Adam Colligan: [redacted]
5:12 PM  Justine: In order for me to assist you better, can you please provide the Product and Serial number of the system that is having an issue.
5:13 PM  Adam Colligan: Are the contents of the form I filled out not sent? The SN is [redacted] . This is a model G6T85UA
5:15 PM  Justine: Thank you for verifying me those information, Adam. I have read your issue description and it seems like you need help in processing a replacement for your computer's battery, is that correct?
5:15 PM  Adam Colligan: Yes.
5:16 PM  Justine: I apologize for the inconvenience. I will do my best to help you resolve this issue.
5:19 PM  Justine: Alright, regarding the incorrect information that our tech had provided you, what is that information again, Adam.
5:20 PM  Adam Colligan: My own hunch was confirmed by an independent service center that I had to pay to diagnose this problem: this machine has no dedicated RTC/CMOS battery.
5:20 PM  Justine: -
5:22 PM  Justine: So the issue is that you went to a local tech and they are charging you for your battery replacement correct?
5:22 PM  Adam Colligan: So I wasted both a day of work and over $50 because two technical support representatives told me in no uncertain terms that I was looking at symptoms of a CMOS battery fault. And I *now* face also having to double that money on a new battery unless you guys can make it right.
5:23 PM  Adam Colligan: I paid for the diagnosis because they had to go in and determine that HP tech support was, for lack of a better phrase, full of it
5:23 PM  Adam Colligan: I even have a hilarious piece of transcript: 2:02 PM  Adam Colligan: Look, here is a theory. What if this PC does not have a separate CMOS battery, and it's been using power from the main battery to keep the clock and BIOS settings current? In that case, the symptoms might just be a result of poor seating of the main battery cable. To rule that out, I would like to confirm for a fact that a CMOS battery actually exists on this motherboard, and I'd like to see it with my own eyes.2:02 PM  Adam Colligan: ...before I go without my PC for days or weeks2:03 PM  KARISHMA BARPANDA: The CMOS battery exsist in the motherboard and it is not a customer replaceable part. 2:04 PM  KARISHMA BARPANDA: You cannot see it.
5:25 PM  Adam Colligan: I had even checked the x360 service manuals and compared them to other Envy models, since the CMOS / RTC battery is specified for the other ones. Hence this (apparently completely false) gem: KARISHMA BARPANDA: I would like to inform you that, the CMOS battery is not a customer replaceable part.2:24 PM  Adam Colligan: What does that have to do with whether or not you know where it is?2:24 PM  Adam Colligan: Is there some rule that you are not allowed to say "I don't know" ?2:24 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.2:25 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.2:25 PM  KARISHMA BARPANDA: The CMOS battery can be replaced by the HP hardware engineers.
5:25 PM  Adam Colligan: Apparently the truth is that it's not in the manual because *it doesn't exist*
5:27 PM  Justine: I apologize about that, Adam. But to explain this properly, yes the CMOS battery is not a replaceable part. We do not ship CMOS batteries. But if you want, you can consult your local tech about it.
5:28 PM  Justine: May I ask why do you want the CMOS battery to be replaced, Adam?
5:28 PM  Adam Colligan: Oh my god.
5:28 PM  Adam Colligan: You're going to have to just give me a moment here.
5:29 PM  Justine: Okay Adam. Please take your time.
5:31 PM  Adam Colligan: Before I explain again, let me just ask a question or two. Let's say that, hypothetically, HP Support thought that I needed to replace my CMOS/RTC battery. So I ship it off. Imagine that it arrives at the service center and the techs there discover that there is nothing wrong with the CMOS battery. Instead, they find that the main battery has a short in it and needs to be replaced. Would I have to pay for the replacement of the main battery?
5:32 PM  Justine: Alright, first the repair process is that whatever that is we need to replace, we will. also, fortunately, your warranty covers the repair for this computer. We could send it for repair for you.
5:33 PM  Justine: Whether the CMOS battery or the main battery, we will fix this computer like brand new for you.
5:34 PM  Adam Colligan: And you're saying there is no charge for this?
5:35 PM  Justine: Yes Adam.
5:36 PM  Justine: It will be for free.
5:36 PM  Justine: May I ask for your shipping address?
5:37 PM  Adam Colligan: Wait; see, I don't want to do that yet. How long would the whole shipping and repair process take?
5:37 PM  Adam Colligan: I've already been told that I have to go through the whole shipping nightmare even though I live right near an authorized service center
5:38 PM  Justine: Okay, we will ship you a box with a return label within 2-3 business days, then the repair process would be 7-9 business days maximum. This is for us to make sure that everything will be checked and diagnosed so that when it comes back to you, it would be like brand new.
5:39 PM  Justine: We could still send you the box if you want, the box would be active within 30 days, so you could decide when you want it to be dispatched.
5:40 PM  Adam Colligan: See, and that's the problem: I might rather just buy a new battery for $53 rather than be without my main work machine for 2 weeks+.
5:40 PM  Adam Colligan: And so here's what happened:
5:41 PM  Justine: Well, if we send it for repair we can determine if it is really a CMOS issue or the main battery.
5:41 PM  Justine: But it would depend on your decision, Adam.
5:44 PM  Justine: Are you still there? I want to get your issue taken cared of today. Please respond if you are available to chat.
5:44 PM  Adam Colligan: In order to make that choice, I needed to know whether this could really be a CMOS battery issue. If it were, then I would have no choice but to send it in, because that would mean replacing the motherboard (or at a minimum re-soldering to it...so probably replacing it). I would probably also have to spend the time before and after the shipment taking the thing apart myself and putting it back together again because I have my own RAM and my own SSD in there. And so I discussed my symptoms (which included a CMOS checksum error) with two technical support representatives. The initial one was going to take me through a BIOS upgrade attempt and informed me that if it did not resolve, it would need to be sent in for a CMOS battery replacement. I think I had already let him know that I had looked for it just to check if there was anything obviously wrong and couldn't find it, and I had wondered if there really was one.
5:46 PM  Justine: Actually if it already gave a CMOS error, it is already that.
5:46 PM  Adam Colligan: In the end I did upgrade the BIOS, but when it appeared to work afterward, it was a coincidence. The ticket was closed but I discovered quickly that the problem was still there. It appeared that maybe I had partially charged the CMOS battery and so just needed to try running the machine for several hours to see if it would recharge. When that failed, I contacted HP again, which is where those snippets of transcript come from
5:47 PM  Connecting...
5:47 PM  Connected. A support representative will be with you shortly.
5:47 PM  Support session established with Justine.
5:47 PM  Adam Colligan: Once again, I was assured that this really was or could be a CMOS battery issue. I specifically raised my concern that there might not even be a CMOS battery, which is why I tried to focus the conversation on getting the rep to tell me where it is. She very directly and repeatedly told me that it was there -- which meant that I had no choice between a long service and replacing the battery myself.
5:49 PM  Justine: The issue is that the CMOS could have already failed so technically, even though it is physically there, the computer is not detecting it anymore. For this, since there is already an error with the CMOS, it should be replaced.
5:50 PM  Adam Colligan: But between the fact that the reps had not sounded competent and the possibility that it might be worth it to replace the CMOS battery myself and void the warranty, I was still suspicious. And that's why I found myself spending $54.13 for a third party service provider to tell me what HP should have known all along. This machine does not have a separate CMOS battery. When the main battery fails -- as mine has -- it will cause all the symptoms of a main battery failure *plus* the symptoms of a CMOS battery failure, since *the main battery* powers this board's real-time clock and RAM environment memory
5:51 PM  Justine: I could wait for your decision if you want to send it in for repair, Adam. I will still send you a box for the repair, that would be available for use within a month. It is still up for you to decide, Adam.
5:51 PM  Adam Colligan: And now you're saying the same thing: that my CMOS checksum error (and also my clock resetting) means there is a problem with the CMOS / RTC battery.
5:51 PM  Adam Colligan: Am I correct that that is what you are saying?
5:52 PM  Justine: I highly suggest sending it for repair, really. In this case we could provide a proper explanation in your issue.
5:52 PM  Adam Colligan: Are you or are you not telling me that I have a CMOS / RTC battery and that it might need to be replaced?
5:53 PM  Justine: Every motherboard has a CMOS battery, yours have already failed so it needs to be replaced.
5:54 PM  Adam Colligan: See, I think -- and the service center that just looked at it thinks -- that that statement is flat-out untrue.
5:54 PM  Justine: You could replace it by yourself like what you want, but first, we do not ship CMOS batteries, and replacing it by yourself will jsut tamper the warranty.
5:55 PM  Adam Colligan: And so the important question is: will HP give me a free main battery, which I can install myself without needing to send the computer off, if it turns out that you just became rep #3 to give me false information?
5:56 PM  Justine: Actually, we cannot determine that without really having it physically here for further details and with sufficient tests. Our technicians will be testing it not just inside, but physically.
5:57 PM  Adam Colligan: You don't need my computer in front of you in order to know whether or not this model *has* a CMOS battery. You are essentially swearing up and down that it has one. If you're wrong, then you've not only cost me the $54 I already spent but will also unnecessarily cost me two weeks+ without my computer
5:57 PM  Justine: I apologize but we can only replace the battery if we have the computer in question, and we cannot do that without the error in the main battery itself.
5:57 PM  Justine: Every computer has a CMOS battery, what I mean is that we have to perform tests on your computer physically to determine the real issue.
5:57 PM  Justine: I apologize about that.
5:57 PM  Adam Colligan: So I want to know: if it turns out that this model has no CMOS battery, will HP comp me a main battery in return for the time and money that it has already made me waste?
5:59 PM  Justine: Actually, we can send you a box with a return label, so that you can decide. At this point we will just wait for your decision.
5:59 PM  Justine: We will only replace or provide on the part that neede to be replaced.
6:00 PM  Justine: The CMOS and the main battery has different roles, so we couldn't send you a main battery when it is a CMOS issue.
6:00 PM  Justine: Is that okay?
6:00 PM  Justine: May I ask for your shipping address please?
6:01 PM  Adam Colligan: That. That last thing you said. That is the heart of the whole problem! If the CMOS battery doesn't exist, then you would *know* you could just send me a main battery?
6:01 PM  Adam Colligan: As long as it's not costing me anything, sure, send me a stupid box. My address is [redacted]
6:02 PM  Justine: If the CMOS battery doesn't exist, the main battery doesn't have anything to do with it. If it does not exist, we can send it for repair, since we do not send CMOS batteries. That is the only thing that we can do.
6:02 PM  Justine: Alright, is there anything else I could help you with?
6:03 PM  Adam Colligan: Oh lord. If the CMOS battery doesn't exist, then the main battery is the whole point, because it's the main battery that's supplying the power to the components that normally draw from the CMOS battery on most other systems.
6:03 PM  Adam Colligan: Nope, there's nothing else. You've provided another great transcript for the file.
5:10 PM  Support session established with Justine.5:10 PM  Adam Colligan: Hi Justine5:11 PM  Justine: Thank you for contacting the HP Customer Support & Services. My name is Justine and I will be your chat support specialist today. Please give me a few minutes while I review your issue description details. NOTE: For security reasons, PLEASE DO NOT send credit card information via chat. Also, If you are using a mobile device (iPad, iPod, iPhone, etc....) and experience difficulties viewing the chat window, please initiate a new chat from a Windows or Mac computer or use a different browser for better compatibility.For DISCONNECTED or failed to reconnect, we keep records for all interactions feel free to initiate another chat.5:11 PM  Justine: May I have the phone number and e-mail address associated with your HP product?5:11 PM  Adam Colligan: [redacted]5:12 PM  Justine: In order for me to assist you better, can you please provide the Product and Serial number of the system that is having an issue.5:13 PM  Adam Colligan: Are the contents of the form I filled out not sent? The SN is [redacted] . This is a model G6T85UA5:15 PM  Justine: Thank you for verifying me those information, Adam. I have read your issue description and it seems like you need help in processing a replacement for your computer's battery, is that correct?5:15 PM  Adam Colligan: Yes.5:16 PM  Justine: I apologize for the inconvenience. I will do my best to help you resolve this issue.5:19 PM  Justine: Alright, regarding the incorrect information that our tech had provided you, what is that information again, Adam.5:20 PM  Adam Colligan: My own hunch was confirmed by an independent service center that I had to pay to diagnose this problem: this machine has no dedicated RTC/CMOS battery. 5:20 PM  Justine: -5:22 PM  Justine: So the issue is that you went to a local tech and they are charging you for your battery replacement correct?5:22 PM  Adam Colligan: So I wasted both a day of work and over $50 because two technical support representatives told me in no uncertain terms that I was looking at symptoms of a CMOS battery fault. And I *now* face also having to double that money on a new battery unless you guys can make it right.5:23 PM  Adam Colligan: I paid for the diagnosis because they had to go in and determine that HP tech support was, for lack of a better phrase, full of it5:23 PM  Adam Colligan: I even have a hilarious piece of transcript: 2:02 PM  Adam Colligan: Look, here is a theory. What if this PC does not have a separate CMOS battery, and it's been using power from the main battery to keep the clock and BIOS settings current? In that case, the symptoms might just be a result of poor seating of the main battery cable. To rule that out, I would like to confirm for a fact that a CMOS battery actually exists on this motherboard, and I'd like to see it with my own eyes.2:02 PM  Adam Colligan: ...before I go without my PC for days or weeks2:03 PM  KARISHMA BARPANDA: The CMOS battery exsist in the motherboard and it is not a customer replaceable part. 2:04 PM  KARISHMA BARPANDA: You cannot see it. 5:25 PM  Adam Colligan: I had even checked the x360 service manuals and compared them to other Envy models, since the CMOS / RTC battery is specified for the other ones. Hence this (apparently completely false) gem: KARISHMA BARPANDA: I would like to inform you that, the CMOS battery is not a customer replaceable part.2:24 PM  Adam Colligan: What does that have to do with whether or not you know where it is?2:24 PM  Adam Colligan: Is there some rule that you are not allowed to say "I don't know" ?2:24 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.2:25 PM  KARISHMA BARPANDA: That is the reason, it is not shown in the manual.2:25 PM  KARISHMA BARPANDA: The CMOS battery can be replaced by the HP hardware engineers.5:25 PM  Adam Colligan: Apparently the truth is that it's not in the manual because *it doesn't exist*5:27 PM  Justine: I apologize about that, Adam. But to explain this properly, yes the CMOS battery is not a replaceable part. We do not ship CMOS batteries. But if you want, you can consult your local tech about it.5:28 PM  Justine: May I ask why do you want the CMOS battery to be replaced, Adam?5:28 PM  Adam Colligan: Oh my god.5:28 PM  Adam Colligan: You're going to have to just give me a moment here.5:29 PM  Justine: Okay Adam. Please take your time.5:31 PM  Adam Colligan: Before I explain again, let me just ask a question or two. Let's say that, hypothetically, HP Support thought that I needed to replace my CMOS/RTC battery. So I ship it off. Imagine that it arrives at the service center and the techs there discover that there is nothing wrong with the CMOS battery. Instead, they find that the main battery has a short in it and needs to be replaced. Would I have to pay for the replacement of the main battery?5:32 PM  Justine: Alright, first the repair process is that whatever that is we need to replace, we will. also, fortunately, your warranty covers the repair for this computer. We could send it for repair for you.5:33 PM  Justine: Whether the CMOS battery or the main battery, we will fix this computer like brand new for you.5:34 PM  Adam Colligan: And you're saying there is no charge for this?5:35 PM  Justine: Yes Adam. 5:36 PM  Justine: It will be for free.5:36 PM  Justine: May I ask for your shipping address?5:37 PM  Adam Colligan: Wait; see, I don't want to do that yet. How long would the whole shipping and repair process take?5:37 PM  Adam Colligan: I've already been told that I have to go through the whole shipping nightmare even though I live right near an authorized service center5:38 PM  Justine: Okay, we will ship you a box with a return label within 2-3 business days, then the repair process would be 7-9 business days maximum. This is for us to make sure that everything will be checked and diagnosed so that when it comes back to you, it would be like brand new.5:39 PM  Justine: We could still send you the box if you want, the box would be active within 30 days, so you could decide when you want it to be dispatched.5:40 PM  Adam Colligan: See, and that's the problem: I might rather just buy a new battery for $53 rather than be without my main work machine for 2 weeks+. 5:40 PM  Adam Colligan: And so here's what happened:5:41 PM  Justine: Well, if we send it for repair we can determine if it is really a CMOS issue or the main battery.5:41 PM  Justine: But it would depend on your decision, Adam.5:44 PM  Justine: Are you still there? I want to get your issue taken cared of today. Please respond if you are available to chat.5:44 PM  Adam Colligan: In order to make that choice, I needed to know whether this could really be a CMOS battery issue. If it were, then I would have no choice but to send it in, because that would mean replacing the motherboard (or at a minimum re-soldering to it...so probably replacing it). I would probably also have to spend the time before and after the shipment taking the thing apart myself and putting it back together again because I have my own RAM and my own SSD in there. And so I discussed my symptoms (which included a CMOS checksum error) with two technical support representatives. The initial one was going to take me through a BIOS upgrade attempt and informed me that if it did not resolve, it would need to be sent in for a CMOS battery replacement. I think I had already let him know that I had looked for it just to check if there was anything obviously wrong and couldn't find it, and I had wondered if there really was one.5:46 PM  Justine: Actually if it already gave a CMOS error, it is already that.5:46 PM  Adam Colligan: In the end I did upgrade the BIOS, but when it appeared to work afterward, it was a coincidence. The ticket was closed but I discovered quickly that the problem was still there. It appeared that maybe I had partially charged the CMOS battery and so just needed to try running the machine for several hours to see if it would recharge. When that failed, I contacted HP again, which is where those snippets of transcript come from5:47 PM  Connecting...5:47 PM  Connected. A support representative will be with you shortly.5:47 PM  Support session established with Justine.5:47 PM  Adam Colligan: Once again, I was assured that this really was or could be a CMOS battery issue. I specifically raised my concern that there might not even be a CMOS battery, which is why I tried to focus the conversation on getting the rep to tell me where it is. She very directly and repeatedly told me that it was there -- which meant that I had no choice between a long service and replacing the battery myself.5:49 PM  Justine: The issue is that the CMOS could have already failed so technically, even though it is physically there, the computer is not detecting it anymore. For this, since there is already an error with the CMOS, it should be replaced.5:50 PM  Adam Colligan: But between the fact that the reps had not sounded competent and the possibility that it might be worth it to replace the CMOS battery myself and void the warranty, I was still suspicious. And that's why I found myself spending $54.13 for a third party service provider to tell me what HP should have known all along. This machine does not have a separate CMOS battery. When the main battery fails -- as mine has -- it will cause all the symptoms of a main battery failure *plus* the symptoms of a CMOS battery failure, since *the main battery* powers this board's real-time clock and RAM environment memory5:51 PM  Justine: I could wait for your decision if you want to send it in for repair, Adam. I will still send you a box for the repair, that would be available for use within a month. It is still up for you to decide, Adam.5:51 PM  Adam Colligan: And now you're saying the same thing: that my CMOS checksum error (and also my clock resetting) means there is a problem with the CMOS / RTC battery.5:51 PM  Adam Colligan: Am I correct that that is what you are saying?5:52 PM  Justine: I highly suggest sending it for repair, really. In this case we could provide a proper explanation in your issue.5:52 PM  Adam Colligan: Are you or are you not telling me that I have a CMOS / RTC battery and that it might need to be replaced?5:53 PM  Justine: Every motherboard has a CMOS battery, yours have already failed so it needs to be replaced.5:54 PM  Adam Colligan: See, I think -- and the service center that just looked at it thinks -- that that statement is flat-out untrue. 5:54 PM  Justine: You could replace it by yourself like what you want, but first, we do not ship CMOS batteries, and replacing it by yourself will jsut tamper the warranty.5:55 PM  Adam Colligan: And so the important question is: will HP give me a free main battery, which I can install myself without needing to send the computer off, if it turns out that you just became rep #3 to give me false information?5:56 PM  Justine: Actually, we cannot determine that without really having it physically here for further details and with sufficient tests. Our technicians will be testing it not just inside, but physically. 5:57 PM  Adam Colligan: You don't need my computer in front of you in order to know whether or not this model *has* a CMOS battery. You are essentially swearing up and down that it has one. If you're wrong, then you've not only cost me the $54 I already spent but will also unnecessarily cost me two weeks+ without my computer5:57 PM  Justine: I apologize but we can only replace the battery if we have the computer in question, and we cannot do that without the error in the main battery itself.5:57 PM  Justine: Every computer has a CMOS battery, what I mean is that we have to perform tests on your computer physically to determine the real issue.5:57 PM  Justine: I apologize about that.5:57 PM  Adam Colligan: So I want to know: if it turns out that this model has no CMOS battery, will HP comp me a main battery in return for the time and money that it has already made me waste? 5:59 PM  Justine: Actually, we can send you a box with a return label, so that you can decide. At this point we will just wait for your decision.5:59 PM  Justine: We will only replace or provide on the part that neede to be replaced.6:00 PM  Justine: The CMOS and the main battery has different roles, so we couldn't send you a main battery when it is a CMOS issue.6:00 PM  Justine: Is that okay?6:00 PM  Justine: May I ask for your shipping address please?6:01 PM  Adam Colligan: That. That last thing you said. That is the heart of the whole problem! If the CMOS battery doesn't exist, then you would *know* you could just send me a main battery? 6:01 PM  Adam Colligan: As long as it's not costing me anything, sure, send me a stupid box. My address is [redacted]6:02 PM  Justine: If the CMOS battery doesn't exist, the main battery doesn't have anything to do with it. If it does not exist, we can send it for repair, since we do not send CMOS batteries. That is the only thing that we can do.6:02 PM  Justine: Alright, is there anything else I could help you with?6:03 PM  Adam Colligan: Oh lord. If the CMOS battery doesn't exist, then the main battery is the whole point, because it's the main battery that's supplying the power to the components that normally draw from the CMOS battery on most other systems.6:03 PM  Adam Colligan: Nope, there's nothing else. You've provided another great transcript for the file.
7. In desperation, I try in vain to attract @HPSupport's attention on Twitter
Spoiler (Highlight to read)
@adamcolligan
6:20 PM - 13 Apr 2015
(1/3) Hey @HPSupport : would you make a wager with me? The question: whether 3 separate HP reps cost me $54.13 + 8 hrs' work with false info
@HPSupport (2/3) If I'm right, you send me a new battery for my x360-15t and say you're super sorry on your twitter feed. If I'm wrong...
@HPSupport then I guess no hilarious Reddit thread with support transcripts, and I'll spend like $1m on 2ml of your official ink. Deal?
@HPSupport (4/3) It's easy to resolve. Alls you have to do is know, and I mean *know*: "Does the G6T85UA have a dedicated RTC/CMOS battery?"
@adamcolligan6:20 PM - 13 Apr 2015(1/3) Hey @HPSupport : would you make a wager with me? The question: whether 3 separate HP reps cost me $54.13 + 8 hrs' work with false info@HPSupport (2/3) If I'm right, you send me a new battery for my x360-15t and say you're super sorry on your twitter feed. If I'm wrong...@HPSupport then I guess no hilarious Reddit thread with support transcripts, and I'll spend like $1m on 2ml of your official ink. Deal?@HPSupport (4/3) It's easy to resolve. Alls you have to do is know, and I mean *know*: "Does the G6T85UA have a dedicated RTC/CMOS battery?"
No response; not sure if I expected one or not.

Update time! I know you've been dying to know how this has been turning out.
I provided all the requested information in response to the private message from HP staff. Nothing ever came of it; as far as I can tell, no real human being ever attempted to contact me after being "forwarded" the details of the case.
Three days after I tweeted at them, @HPSupport sent me a series of public replies. In essence, they told me to abandon useless post-sales technical support and get information from HP Sales.
Adam Colligan @AdamColligan · Apr 13
(1/3) Hey @HPSupport : would you make a wager with me? The question: whether 3 separate HP reps cost me $54.13 + 8 hrs' work with false info
Adam Colligan @AdamColligan · Apr 13
@HPSupport (2/3) If I'm right, you send me a new battery for my x360-15t and say you're super sorry on your
Adam Colligan @AdamColligan · Apr 13
@HPSupport then I guess no hilarious Reddit thread with support transcripts, and I'll spend like $1m on 2ml of your official ink. Deal?
Adam Colligan @AdamColligan · Apr 13
@HPSupport (4/3) It's easy to resolve. Alls you have to do is know, and I mean *know*: "Does the G6T85UA have a dedicated RTC/CMOS battery?"
Adam Colligan ‏@AdamColligan Apr 13
@HPSupport No but seriously. Does the HP Envy x360 have a dedicated RTC / CMOS battery or not?
HP Support ‏@HPSupport Apr 16
@AdamColligan Hello Adam, Eddie here. Saw your tweet. Our Product Information team will be able to assist with your inquiry. Dial:.. ^HPCare
HP Support ‏@HPSupport Apr 16
@AdamColligan 1800-752-0900. Follow prompts for “product information”. If you prefer email click this link http://ow.ly/HYnHT .. ^HPCare
HP Support ‏@HPSupport Apr 16
@AdamColligan Once there be sure to choose "Contact an HP sales specialist" as your subject. Let me know if you require further... ^HPCare
HP Support ‏@HPSupport Apr 16
@AdamColligan information and/or assistance. Have an awesome day! Thanks! ^HPCare
Now, being the exhaustive give-it-a-try kind of guy that I am, I tried *both* the phone and the email path to support. I may have been told once on the phone to try the email, but it's hard to even remember at the moment. I'll just paste the email outcome here.
Me (into the webform):
HP reps have directed me to contact sales support after others in the company were unable to help with a technical product question. I need to know whether the HP Envy x360 model G6T85UA (should be board 780958-501 and main battery 760944-421) has a dedicated CMOS/RTC battery. If it does, I need to know *where* it is connected to the board. This is a fairly urgent issue for me implicating a disconnect or swap-out of the main battery while AC power is not being supplied.
HP:
Dear Adam,
Thank you for contacting the hp.com Sales Center.
I understand the you are still seeking resolution for your technical concern and I’m sorry to hear that this remains unresolved.
I'm very sorry, but our email sales team does not handle technical or product support concerns. We can only handles sales inquiries pertaining to orders placed in our store.
HP Technical Support will be able to provide you with service and support for hardware, software, and parts replacement of HP products that are still covered under warranty.
I strongly suggest that you contact the HP Technical Support Team since your matter requires technical expertise. HP Technical Support can best assist you and can be reached 24 hours a day at: http://www.hp.com/contacthp
Below is step by step guide how to obtain the webform/online form:
1. Please copy and paste this link http://www.hp.com/contacthp into a new browser.
2. Please enter your model number in the "Enter my model number" search field provided then hit the "Find my product" button to generate the result.
3. Select the correct product from the search results.
4. On the next page wait for a few seconds to load the webform.
5. Scroll down to find the webform.
5. Complete the webform then hit the "Submit" button.
6. After you fill out the online form, you will receive a Technical Support case number. You will also be able to engage with a Tech Support product specialist either by chat or they will give you a call at your earliest convenience.
By the way, I have seen a link which might help you with this concern. Here's the link:
http://partsurfer.hp.com/Search.aspx?SearchText=G6T85UA
The link shows the the HP ENVY 15-U011DX X360 CONVERTIBLE PC (ENERGY STAR) has the 780958-501 motherboard but has a different battery. It doesn't show also the RTC Battery and where you can find it. Please contact our HP Technical Support for other information.
I hope this information has been of assistance to you, Adam. Please reply to this message if there is anything further we can do. For your convenience, you may also call the HP.com Sales Center directly at 1-888-222-0029 between 7:00 AM - 2:00 AM EST, seven days a week.
Customer Satisfaction is our store’s top priority. Please tell us about your email experience today. To participate, please click on our Customer Satisfaction Survey link below.
Thank you for choosing HP. We appreciate your business.
Regards,
Regine G.
Oh dear. So technical support doesn't have technical information about HP machines, and sales support doesn't answer technical questions about HP machines and refers you to technical support. Brilliant. But by this time, I of course knew better than to actually *believe* what someone was telling me, so I used the sales phone number instead.
The sales guy was super eager to help, especially since I framed this as a problem of future use. I work on disaster vulnerability issues. If I buy Envy x360 15ts and use them in a place where there isn't AC power for a while, can I swap spare batteries into them without screwing up the BIOS and real-time clock settings?
He put me on hold two or three times for what I was led to believe were very thorough attempts to get me a totally definitive answer. And this is what someone eventually told him to tell me. All HP machines ship with CMOS batteries.
So I must have been mistaken all along, right? The CMOS battery must have stopped working at the same time as the main battery. It must just be that neither I nor my local repair shop could find my CMOS battery because we all have the wrong prescriptions on our glasses and contact lenses. Well, there's just one small issue with getting to that conclusion: what HP told me about my machine was, once again, totally false.
How do I know? Because I still didn't believe HP, and rather than shipping my compter off for weeks in the big padded box, I ordered a new main battery for a total of just over $60. I swapped it. Guess what happened, HP? If you guessed, "every aspect of the problem instantly resolved, because there never was a CMOS/RTC battery in this machine in the first place", you would win a gold star. But I'm assuming you'd also lose your job, because this particular piece of information has somehow been banished and outlawed from the minds of HP employees and contractors.
I wonder: would anybody at HP be interested in apologizing to me, much less in finding a way to make up for the $115+ I've lost because nobody at any stage to this point has been willing to act like a human being?
BUT WAIT, THERE'S GREAT NEWS
I shouldn't make it seem through this thread that HP totally lacks competence and doesn't care about me at all. Because within two hours of receiving the email from HP Sales telling me that they weren't going to do anything about my problem, I started receiving advertising email blasts full of great offers and promotions about buying a new HP laptop and other great products! Yay! I guess I'm not invisible after all. And I'm sure if I bought *more* stuff from HP, they would take care of me then. Right?

IMessages sent from icloud address/phone number=2 conversations!

This is a long-standing issue that defies resolution. At times, my iphone or my wife's iphone will send iMessages from our iCloud addresses instead of our phone number. So if my wife sends an iMessage to me, I sometimes get a new message from "[email protected]". Although her name, email addresses and phone number are in my Contacts, this new conversation shows up as her email address. We used to think it was because she travels abroad and uses wi-fi in her hotel that caused the phone to use an email address rather than her number because she was out of the UK. Not so! Here's what happened today: My wife sent me and our 2 children iMessages from London Heathrow to us three at home. My message came through as from her email address, my daughter's also came through from her email address, but my son, a few yards down the hallway got his from her phone number.
This is a typical scenario which can work the other way round when it's ME sending her the iMessages where she gets my message as though I'd sent it from my email address rather than the phone number.
I have been through all the hoops I know of to sort this but I just can't fix it. I don't know whether it's the iPhone, iCloud or what that's at fault. But it is driving me mad.
In this morning's case, I replied to her message by using an older (yesterday's) conversation to send my iMessage to her, and her reply to that came to me via her phone number, as expected, and good as gold. Had I just replied to her iMessage, it would have perpetuated the TWO conversations. I have tried logging out and back in, deleting the accounts and reinstating them, re-entering the settings, making sure that the "Start new conversations from..." is set up correctly and so on. Then after a while, it returns, randomly, to sending texts from the email and starts a new conversation again. And you can't combine the 2 conversations even when you go to Details-Add to existing contact etc.
I have also just been informed by a supplier that my iMessages to him are showing up as my email address not my phone number, despite my iphone being set to 'Start conversations from +44777...etc"
Please throw out suggestions as you wish and I'll be grateful, even if it's one I've already tried and failed with.
This icloud is a nightmare.
Many thanks in advance.
Chris
iphone 6, latest iOS

Bump.
So no one knows anything about this, or how to correct this iMessage bug?

GL2DW conversions... I've tried everything, but still nothing works.

I've been trying for a few days to convert a CS1 GoLive site to a CS5 Dreamweaver site... and nothing has worked.
I have studied about 5 online discussions for various procedures. I downloaded the GL2DW extension and loaded that into the CS5 Dreamweaver site. No luck. I tried changing the names of the various GoLive folders to web-content, web-data and web-settings. But when I go to convert I'm still asked to list the folder with my .site file... which is clearly there. Yet it is ignored for some reason.
I next tried downloading an extension which I loaded into a folder in GoLive. But on launch it informed me that this conversion extenstion only supports CS2 and above.
Then I tried doing as was suggested on this list in another question:
From GoLive go to Site > Convert Site to New Structure.
Then from Dreamweaver go to Site > Import GoLive Site.
But that didn't work because there is no ' Convert Site to New Structure' option in CS1 GoLive.
So... short of looking around on ebay for a copy of GoLive 9 what might anyone suggest?
It's like I fall through all the cracks here... and don't fit in anywhere.
My site is fairly simple... but I wouldn't want to hack it all out from scratch in Dreamweaver... if at all possible.
Thanks for any help.
www.johnnez.com

The migration tool doesn't use the GoLive sitefile. What you migrate is the sitefolder itself in accordance with the organization requires. Which is:
GoLive.site file
web-content folder
web-data folder
web-settings
Youmight need to rename your folders. See post above from September 27th.
Links:
http://www.adobe.com/devnet-archive/dreamweaver/golive_migration/content/using_gmk_extensi on.html
http://www.biz-comm.com/gl2dw/
http://www.adobe.com/designcenter/dreamweaver/articles/drwcs3ip_gol2drw.html (downlaod the pdf which it links to there).

Skype - Problem with conversations (group)

Hello i have problem :
I call to friend - work
i call to friend and add 2 friend = It does not work
why?
I add 2 friend to conversation and 1 friend add 2 friend no (After addition of 2 people can not write in a conversation (connection problem))
Leave Conversations = It does not work
Everything related to the conversation group does not work
i : 10xReinstall skype, install IE 11, Clean Regedit, use Ccleaner, Update drivers, use ADWCleaner, update version, uninstall anti-virus, Disable Firewall, disable firewall system, router. download latest skype versions, update windows, update drivers.
Skype Version bugged : 7.0.102
Available commands:
/me [text]
/topic [text]
/add [skypename+]
/alertson [text]
/alertsoff
/leave
/setrole [skypename] MASTER|USER
/kick [skypename]
/get blob
/get uri
/get options
/set options [[+|-]flag] ..
/golive [token]
/invite [skypename]
/showmembers
/help
For more help please see http://www.skype.com/go/help.chathelp
[10:50:29] System: MSNP: Connection Data (MSNP24):
* Status: NetStateConnected
* Server Current: BAYMSG1020424.gateway.messenger.live.com
* Server Saved: s.gateway.messenger.live.com
* Login: (UIC)
* Skypename: [Removed for privacy]
* EPID: 800da14d-01bf-f1d1-d0e6-2b670390ef97
* ClientVersion: 0/7.0.80.102//
* OSVersion: Windows 6.1 Service
* B: 0 IF: 0
* Time: TZ: UTC+1, Server: 1422093024, Local: 1422093029
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-24T09:03:12Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-24T08:41:41Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-24T08:19:35Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-23T12:46:14Z
* Recent connect: BAYMSG1020424.gateway.messenger.live.com @ 2015-01-22T19:46:56Z
* Push: None (Unregistered)
[10:50:40] System: name=#[Removed for privacy]/$*T;65570

So here is how I got it fixed for my Mac OS X 10.9.5 and skype 6.19. I think Windows folks can follow a similar approach.
option 1 - Contact a live support agent via this link -
https://support.skype.com/en/faq/FA10656/what-is-live-chat-support and have him/her remote login to your machine and fix it.
option 2 - Do-it-yourself
1) Try installing skype ver 6.15 (you need to find the executable over the internet or from skype-support) .. the usual steps to uninstall your current version and re-install the new version.
After installing ver 6.15, make sure in Skype -> Preferences, you don't check the "Always keep skype up to date" option.. or else it will go and install the latest version 6.19.
2) If it still doesn't work,
(i) Go to Finder window -> select 'Go' tab on top -> select 'Go to Folder' -> type '~/Library/Application Support/Skype/'
there you will find a file called "shared.xml". DELETE IT.
(ii) Go to Finder window -> select 'Go' tab on top -> select 'Go to Folder' -> type '/private/var/db'. There may be a file called "config.xml" or something similar. DELETE IT.
3) Even then it doesnt work, go back to Option 1 (contacting skype-support)

Iphoto 6 nightmare: how do i uninstall properly?

I would greatly appreciate some help getting me out of this iphoto 6 nightmare - missing thumbnails, missing pictures, etc.
i have my pictures backed up - my hard drive is cloned on an external disk, containing my iphoto folder BEFORE i upgraded from ilife 05 to 06.
i have followed all the advice i could find in this forum and tried everything - rebuilding, creating a new library from my old pictures folder, importing, and so on. nothing changes.
i'd like to purge my system of the poisonous iphoto 6 so i can re-install iphoto 5 and drag my old pictures back in. can someone tell me the correct way to do this? i assume there are other files to trash besides the library and plist. i'm not sure what else was installed and where.
thanks!
G5 Dual 2 GHz Mac OS X (10.4.5)
G5 Dual 2 GHz Mac OS X (10.4.5)

Hi petitemarie,
To get back to iPhoto 5, you would really need a backup of the iPhoto 5 Library folder that has not been updated to version 6 in order to keep your metadata such as comments and keywords, and also all your albums, slideshows, books.
Steps:
-open iPhoto 6 and select all newly imported rolls since your iPhoto 5 to 6 conversion one at a time and File>export them to a newly created folder on the desktop. Name the folder with identifying text and a date such as 1/05/06 my birthday party
-close iPhoto
Steps:
To reinstall iPhoto 5
Drag the iPhoto Library folder in the Pictures folder to the desktop and rename it it iPhoto 6 library
Navigate to /Applications and drag iPhoto to the trash
Navigate to /Library/Receipts and drag all iPhoto receipts to the trash
Navigate to ~/Library/Preferences and drag com.apple.iPhoto.plist to the trash.
Insert your iLife 5 CD/DVD and choose to do a custom install. You will have to keep ongoing through the steps of the install before you get to the screen where you can choose a custom install.
Install iPhoto.
Run Software Update and update iPhoto to the latest version of 5
Put your backup iPhoto 5 library in the Pictures folder and launch iPhoto.
Once iPhoto is open and showing your library import the folders you exported on version 6 into the library.
Let me know how it turns out.
The version 5 iPhoto might not be integrated with the other iapps. now that they are different versions. This I do not know for sure.

Golive

Hi,
Can anybody pls tell me what are that activities we need to perfirm during End user training,Cutover strategy & Golive
Regards,
Rahul

End User Training:
This means training the end users about running different business processes on SAP.
Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced.   Therefore the more effort you put into helping the users master the system early the better.
Cut Over Plans:Detailed plans need to be developed for cutting over from the old system(s) to the new.   Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
Cutover Activities or Master Data Uploading Strategies Depending upon the when we are going live. As per that, you have to give the information to your core team. If you goling live at the middle you have to upload the all P&L Account items and B/S Items. If you going live at the financial year start, you have to only Upload the B/S Items.
Cutover Activities/Strategies in SAP FI.
1.   G/L Master Upload Thru BDC or LSMW (TC-Fs00 and extended one co code to another company code Fs01)
2.   Vendor Master Upload Thru BDC Or LSMW (Will be Taken Care By MM)
3.   Customer Master Upload Thru BDC or LSMW (Will be Taken Care By SD)
4.   Asset Master Upload(Thru As90)
5.   Cost Element Master Upload
6.   Cost Center Master Upload
7.   Profit Center Master Upload
8.   G/L Balances Thru F-02
10. Vendor Balances thru F-43
11. Customer Balances thru F-22
12. Customer Advances thru f-29
13. Vendor Advances thryu F-48
Before uploading Vendor Balances you have to take care of WHT(TDS) Information.
Go Live:
It means cut-off from the legacy System. During this following tasks are followed:
Production support facilities are defined, for example, checking system performance on a daily basis
Validation of business processes and their configuration
Follow-up training for users
Signoffs, etc.
Hope this helps you.
Regards,
Rakesh

GoLive conversion nightmare

Similar Messages

Maybe you are looking for