Google chrome install wont close when click the X

google chrome install wont close when click the X . I dont know why but it is like the X is not there, ~I click in the X button and nothing happens in this browser, i am tlaking about the google site and the box in the uppper corner right,these happens since installed the new version of mozilla.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Google Chrome installing without my consent when I update Adobe Flash Player

To whom do I complain about Google Chrome installing without my consent when I updated Adobe Flash Player? I updated to Adobe Flash Player 11 Active X this morning. I saw no indication that Google Chrome was going to install and given that I have used GC in the past and absolutely hated it I would not have completed the Flash update. If there is an opt-out for Chrome when updating Flash it needs to be more obvious.
I was annoyed but simply uninstalled Chrome and thought that would take care of it. Not so fast! Suddenly links in Outlook emails stopped working. All tolled I spent 2 hours figuring out what the problem was, finding the solution and editing the registry to get rid of Chrome. I have moved beyond annoyed to livid. I am self-employed and did not have 2 hours of my week to devote to this.
I will never use Google Chrome. I tried it, didn't like it and I'm now I'm thoroughly done. Is there a way to permanently opt out of getting Google Chrome?
So again, to whom do I complain?
Tamara Gehle

No one--if they gave a **** int he first place their software gurus woulnd't have created a download that essentially hijacks your computer and installs the google toolbar and google chrome--all without asking for consent. Too much of this crap goes on. Look at your task manager--all sorts of updates and crap running behind the scenes (google update runs constantly on my other computer till I deleted the updater.exe)-too much of it from hidden downloads like this site propgates. And to top it off, I can't edit Adopbe .pdf forms on line and save them anymore. So I found this link: http://www.tracker-software.com/product/pdf-xchange-viewer where you can fill all those fillable fields in your .pdf doc, and save the damned thing. Works just like Adobe used to when you could fill in fields from forms on-line and save it.

The "not enough storage" window wont close when i press close and my phone also wont reset because my lock button doesnt work. what do i do? just let the battery drain then turn it on?

the "not enough storage" window wont close when i press close and it wont reset because my lock button is broken. what do i do?

Battery does not appear to charge
Important: iPod touch cannot be charged with a FireWire-based power source.
Verify that the power source being used is working properly.
If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
Try another USB port.
Try charging from a USB charger if available.
If that does not help, try another USB cable if available.
Learn more about charging the battery.
The Home button isn't working
Put the iPod Touch to sleep.
Wait a couple of seconds.
Press the Home button.
iPod Touch should wake up.
If iPod Touch does not wake up, then iPod Touch should be serviced.
Resources for Service
http://support.apple.com/kb/he57
https://selfsolve.apple.com

Bookmarks menu used to work fine. Recently, now when clicking the "bookmarks" menu, it says, "sign in to access your Google bookmarks," but it does no good.

Running Firefox 3.6.3.
The "bookmarks" menu is at the top of the page.
The "bookmarks" menu used to work fine.
Now when clicked, the "bookmarks" menu says, "Sign in to access your Google bookmarks."
After signing in to Google, the "bookmarks" menu still does not work, and continues to repeat the "Sign in to access your Google bookmarks."

Looks like Google changed the domain for Google accounts. You'll need to edit the Google Toolbar extension to have the new URL. The alternative id for Google to update their Google Toolbar program for Firefox, but I doubt of that will happen - they have recently dropped support for Firefox. I found these instructions in another support forum.
Open up toolbar.js with a decent editor.
Find:
www.google.com/accounts
and replace ALL with:
accounts.google.com
Restart FF.
Login through the toolbar. Enjoy.
My advice is to get your bookmarks from Google and import them into Firefox itself. If you want a backup service for your bookmarks, use Firefox Sync or Xmarks instead of Google Bookmarks.

Im trying to download a trial version of premiere pro cc with the google chrome browser. It i click download trial and it says that it's downloading, however nothing is showing up in my downloads folder. why is that where is it going?

Im trying to download a trial version of premiere pro cc with the google chrome browser. It i click download trial and it says that it's downloading, however nothing is showing up in my downloads folder. why is that where is it going?

on the adobe site, it says "premiere pro is downloading now..." in big bold letters at the top, but it doesn't seem to ever finish.

I have Mac OS10.4.11 with MS Office 2004 installed. Yesterday, when clicking on the Entourage icon, in the dock, to receive my Email, the icon disappeared and I lost my Email service from the HD and from Spotlight, as well. Word, Excel and PP are still OK

I have Mac OS10.4.11 with MS Office 2004 for Mac, installed. Yesterday, when clicking on the Entourage icon, in the dock, to receive my Email, the icon disappeared and I lost my Email service from the HD and from Spotlight, as well. Word, Excel and PP are still OK. Could this be a virus?

Just thinking, if things are really missing...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Form won't Close when clicking 'X'

Hi All
I just created a Form on 10g that i've attached on Oracle Ebusiness Suite R12
but my problem it's that it wont close when i click on 'X'
I have the following trigger *'WHEN-WINDOW-CLOSED'* inside the trigger is this line of code app_standard.event('WHEN-WINDOW-CLOSED');
I'm not sure where i'm missing it does anyone ever experience this problem.
Thanks
Lethu

Open the program unit app_custom in your fmb file and scroll down in the close_window procedure. You'll see code like this:
bq. \\ if (wnd = '<your first window>') then \\ app_window.close_first_window; \\ elsif (wnd = '<another window>') then \\ ... \\
Replace your first window with your window name and retry your form after compilation. If you have multiple windows, use them in the '<another window>' spots.
The Oracle Applications Developer's Guide explains how it works on page 7-3.

TS1398 I have an ipad and just recently am not able to connect to home wireless wifi, the hourglass just spins when clicking the network to connect, other devices work fine

I have an ipad 2 and just recently am not able to connect to home wireless wifi, the hour glass just spins when clicking the network to connect, other devices work fine and can connect. Was able to connect at school, but not here at home all of a sudden, help?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Af:popUp close when click outside popup area, Jdev 12c

Hi! I had a similar post a long time ago and it became archived due to lack of time from my part, it was never answered
the problem is:
1)Popup without dialog tag: closes when a click is made outside the popup area.
2)Popup with a dialog tag: doesn't close when clicked outside the popup area
I'd like to be able to let the user close the popup(with dialog) when he/she clicks outside the popup area.
Thanks!

User, which jdev version do you use?
Why don't you use the popup without the dialog then?
Can't be too hard to put some buttons ontp the popup.
Timo

When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

Please try :
Software License Agreement reappears after you click Accept
Adobe's "accept license agreement" pops up way too much and ruins UX
Repeatedly asked to accept license agreement
Hope it helps you.
Regards
Rajshree

Finder not working, when click the infinity sigh comes, can't open any file

finder not working, when click the infinity sigh comes, can't open any file?

That could be an indication your drive is failing. If you do not have a current Backup, that is top priority.

IPhoto 6.0.5 crashes when clicking the Edit button

On some of my albums....not all of them.... When clicking the Edit button or double clicking one of the photos in that album, to make it bigger so you can use the arrows to move throught the pictures, iPhoto crashes.
It does this every time with certain albums. They are all jpeg, and the ones that are crashing worked fine before this last upgrade of iPhoto. Is there a known problem with this? I have looked around and seems as though people have had some problems similar to this but not exaclty the same.
Is there something that can be done that I don't know about to remedy this?
Any and all help/suggestions would be much appreciated.
Thanks

Scott:
It may be a color profile issue. Download the Automator workflow "Embed sRGB Profile" file from Toad's Cellar and unzip it. Then export one of the problem files to the desktop and drop on the workflow application. Then import the file and see if it will edit OK. If so you can find the files in the Originals folder that are giving you problems and drag them onto the workflow application file. BUT, just in case make a temp backup copy of the iPHoto Library folder beforehand.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

When clicking the + tab in the tab bar how do I set new tabs to automatically open my home page

When clicking the + tab in the tab bar how do I set new tabs to automatically open my home page

You can do that by using an add-on such as:
* NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
* New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
Another way of opening the home page in a new tab is to middle click on the home button in the navigation toolbar.

When trying to download an APP, it's requesting answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?

When trying to download an APP, it's requesting setup for answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?

Had to do a hard reboot on the iPad and we were able to get the questions to pop up. Now it's just slow downloading the apps.

Google chrome install wont close when click the X

Similar Messages

Maybe you are looking for