GOTO Functionality from BW Report to Transaction on Portal

Hi All, I wanted to know if anyone has any idea about having a "go to" function capability from the BW report to a transaction on the Portal? for eg if we can jump from a CRM complaints or opportunity report to the corresponding transaction on portal(People centric user interface through portal)?

Hi Doniv, Thanks for your reponse. I have used RSBBS before for jumping to other BW/R3 reports, but not sure how can I pass the filters from the BW report to the transaction in portal. for example if I jump from a record in BW report to the corresponding transaction in portal then I want the details of that record open in that transaction. how do I configure the whole thing. Kindly be more specific and give the steps. thanks a lot.

Similar Messages

IP - Is it possible to call exit planning function from ABAP Report..

Hi All,
Greetings.
Is it possible to call exit planning function from ABAP Report (t-code SE38) ? Or I mean is not limited only to be called from ABAP Report, perhaps from BSP / Web-Dynpro / Function Module.
If somebody here has been doing it before, I'm keen to ask to kindly share it. Particularly how to call and transfer data to that exit function.
Or if somebody has done in BPS, appreciate if it can be shared too .
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi.
You can achive this as suggested by Mattias in your previous post.
Lets say you have next data structure:
CostCenter | Amount | PercentForDistibution |
Create input ready query in this format. Restrict cost center by variable type range.
Create WAD with analysis item.
When you run web page you enter range of cost centers (lets say you will enter 101004 to 101010).
I assume you have data only for 101004 in your cube (lets say 1000).
You will see only one record in your webpage.
CostCenter | Amount | PercentForDistibution |
101004       | 1000     | NOTHING
When you create WAD in analysis item properties set "NUMBER_OF_NEW_LINES" to lets say 1 (so in WAD you will see always one blank line for entering new data).
Just add 6 new records:
CostCenter | Amount   | PercentForDistibution |
101005       | NOTHING| 10
101006       | NOTHING| 30
101007       | NOTHING| 20
101008       | NOTHING| 25
101009       | NOTHING| 5
101010       | NOTHING| 10
Then run planning FOX function like this:
FOREACH Z_COST_CENTER.
IF {Amount, Z_COST_CENTER} <> 0
Z_AMNT_TO_DISTRIBUTE = {Amount, Z_COST_CENTER}.
ENDIF.
ENDFOR.
FOREACH Z_COST_CENTER.
IF {PercentForDistibution Z_COST_CENTER} <> 0.
{Amount, Z_COST_CENTER} = Z_AMNT_TO_DISTRIBUTE * {PercentForDistibution Z_COST_CENTER}.
ENDIF.
ENDFOR.
It is not perfect FOX, but as an idead, it should work.
Regards.

How can I print PDF attachments from ABAP report in transaction ME23N?

Hi,
Users attach PDF files using "services for objects" in transaction ME23N.
How can I print the PDF attachments from ABAP report ?
Thanks in advance,,

Hi,
check this link,this might help you to solve your problem
/people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
Regards
Kiran Sure

Calling Procedure or Function from Interative Report

Hi All -
Is it possible to call a procedure/function from "Region Source" of Interact Report page.
Basically the report I want to show would be little difficult if I use SQL alone. So wanted to check is there is a way I can call a SQL procedure/function from Apex Interactive Report Page.
Please share your expertise.
Thanks,
-Seenu

Hi,
These links might help
http://www.oracleapplicationexpress.com/tutorials/71-oracle-apex-interactive-report-based-on-plsql-function
http://sungur.wordpress.com/2009/10/11/apex-interactive-reports-with-dynamic-sql/
Br,Jari

Passing parameters (range) to ABAP function from Crystal report

Hello experts,
Iu2019ve created an ABAP function which receives parameters from a Crystal report . It works very well with simple parameters.
In my crystal report I can see the fields with the prefix u201CI_u201D in the field explorer, and I can use this fields in my Function Modules perfectly.
The problem is to pass parameters like range or multiples values.
I would like to know how to put this parameters into the low and high values of the range and receive them in my Function Module in the ABAP layer.
Thanks in Advance,
Carlos Henrique Matos da Silva and Silvio Meurer - SAP BusinessObjects BI Team - Brazil.

I got the answer of this question under SAP Integration Kit
How to pass parameters to ABAP function in Crystal report

Calling databse function from report end. Using Evaluate function.

Hi All,
We have a req where we need to call the backend functions from the report end. I have seen that Evaluate function can be used to do the same. I tried replicating the same same but it didnt work.
Can any one please elaborate more on this. Syntax & other details. We need to also pass on parameters to the function, probably some column value.
Also please do let me know where all changes need to be done... RPD etc if applicable.
This is the functiion we need to replicate in OBIEE.
Nvl(dwh.dwh_pa_get_si_value_f(Pa_Projects_All_V.Project_Id,Pa_Periods_All_V.Period_Name,-1,Dwh_Pa_Project_Si_Info.Currency_Type,Dwh_Pa_Task_Si_V.Task_Number,'R'),0)
Thanks,
Pankaj

Hey Pankaj,
I got solution for your issue...
Under any logical table.. you create a logical column and
Select Existing logical columns as source checkbox
Click on Eclipse button..
Now here you write..
EVALUATE('dwh.dwh_pa_get_si_value_f(%1,%2,%3,%4,%5)' ,Pa_Projects_All_V.Project_Id,Pa_Periods_All_V.Period_Name,-1,Dwh_Pa_Project_Si_Info.Currency_Type,Dwh_Pa_Task_Si_V.Task_Number,'R')
And click ok..
Hope it works..
it worked for me..
Thanks & Regards
Kishore Guggilla

Call report or transaction from PA20/PA30

Hello,
what is the best way to call a report or a transaction out of PA20 or PA30? Our idea is to enhance the menu but we don't want to do this via a modification. Exit or BADI would be much more elegant. So the scenario is:
open PA20 or PA30 and select an employee, select a function from the menu or click a button to call a program (including transfer of persnr will be great).
Any ideas? Thanx for your feedback
Stefan

You can SUBMIT a(ny) Report via the methods available in the BAdI HRPAD00INFTY.
~Suresh

Error while RRI from BW reports to ECC CJI3 transaction

Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasad

Hi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana

Generate a url from a report or function module

Hi,
I'm trying to generate a url from a report and tried using the function module WWW_ITAB_TO_HTML in the report program, as , but i'm not able to get the expected results. The code is given below. Could someone please try and help me resolve this issue. Thanks in advance.
DATA: emp_name TYPE char80.
DATA: it_itabex TYPE zdb_ex_tty,
it_emp TYPE TABLE OF zis_emp,
it_org TYPE TABLE OF zis_org,
it_pos TYPE TABLE OF zis_pos,
it_pos_alloc TYPE TABLE OF zis_pos_alloc,
it_res TYPE TABLE OF zis_res,
it_res_alloc TYPE TABLE OF zis_res_alloc,
ls_itabex TYPE zdb_ex_s.
DATA: lv_filename TYPE string,
lv_path TYPE string,
lv_fullpath TYPE string,
lv_replace TYPE i.
DATA qstring LIKE it_itabex OCCURS 10.
DATA: url(200), url2(200), url3(200), fullurl(200).
FIELD-SYMBOLS: <fs_emp> LIKE LINE OF it_emp,
<fs_org> LIKE LINE OF it_org,
<fs_pos> LIKE LINE OF it_pos,
<fs_pos_alloc> LIKE LINE OF it_pos_alloc,
<fs_res> LIKE LINE OF it_res,
<fs_res_alloc> LIKE LINE OF it_res_alloc.
** Report Program to export data from database to Excel.
** Populate all the tables that have to be exported.
SELECT * FROM zis_org INTO TABLE it_org.
SELECT * FROM zis_pos INTO TABLE it_pos.
SELECT * FROM zis_pos_alloc INTO TABLE it_pos_alloc.
SELECT * FROM zis_emp INTO TABLE it_emp.
SELECT * FROM zis_res_alloc INTO TABLE it_res_alloc.
SELECT * FROM zis_res INTO TABLE it_res.
** Append the Column Header
CLEAR ls_itabex.
ls_itabex-ipp_pos_id = 'IPP Pos ID'.
ls_itabex-emp_name = 'Name'.
ls_itabex-dt_of_join = 'JoinedOn'.
ls_itabex-emp_status = 'Status'.
ls_itabex-org_name = 'Org'.
ls_itabex-prj_name = 'Project'.
ls_itabex-mgr_name = 'Line'.
ls_itabex-designation = 'Designation'.
ls_itabex-specialization = 'Specialization'.
APPEND ls_itabex TO it_itabex.
** Append all the tables into one internal table
LOOP AT it_pos_alloc ASSIGNING <fs_pos_alloc>.
CLEAR ls_itabex.
ls_itabex-ipp_pos_id = <fs_pos_alloc>-ipp_pos_id.
READ TABLE it_emp ASSIGNING <fs_emp> WITH KEY emp_guid = <fs_pos_alloc>-emp_guid.
IF sy-subrc = 0.
CONCATENATE <fs_emp>-emp_fname <fs_emp>-emp_lname INTO ls_itabex-emp_name SEPARATED BY space.
ls_itabex-dt_of_join = <fs_emp>-dt_of_join.
ls_itabex-emp_status = <fs_emp>-emp_status.
ls_itabex-specialization = <fs_emp>-specialization.
ENDIF.
READ TABLE it_pos ASSIGNING <fs_pos> WITH KEY ipp_pos_id = <fs_pos_alloc>-ipp_pos_id.
IF sy-subrc = 0.
ls_itabex-designation = <fs_pos>-designation.
READ TABLE it_org ASSIGNING <fs_org> WITH KEY org_id = <fs_pos>-org_id.
IF sy-subrc = 0.
ls_itabex-org_name = <fs_org>-org_name.
ls_itabex-mgr_name = <fs_org>-mgr_name.
ENDIF.
ENDIF.
READ TABLE it_res ASSIGNING <fs_res> WITH KEY org_id = <fs_org>-org_id.
ls_itabex-org_name = <fs_org>-org_name.
APPEND ls_itabex TO it_itabex.
ENDLOOP.
url = 'http://testweb/scripts/wgate/zvw10a/!?~language=en'.
url2 = '&~OkCode(LGON)=LGON&login-login_user='.
url3 = '&vbcom-vbeln='.
CONCATENATE url url2 url3 INTO fullurl.
WRITE: /'Staffing Excel'.
CALL FUNCTION 'WWW_SET_URL'
EXPORTING
offset = 12
length = 10
func = fullurl
TABLES
query_string = qstring
EXCEPTIONS
invalid_table = 1
OTHERS = 2.
Thanks & Regards,
Preethi.

Check the below example program :
data: begin of itab occurs 0,
      matnr type mara-matnr,
      mtart type mara-mtart,
      matkl type mara-matkl,
      groes type mara-groes,
      end of itab.
data: ifields type table of w3fields with header line.
data: ihtml   type table of w3html   with header line.
select * into corresponding fields of table itab
          from mara up to 100 rows.
call function 'WWW_ITAB_TO_HTML'
EXPORTING
TABLE_ATTRIBUTES       = 'BORDER=1'
TABLE_HEADER           =
    ALL_FIELDS             = 'X'
tables
    html                   = ihtml
    fields                 = ifields
ROW_HEADER             =
    itable                 = itab
check sy-subrc = 0.
call function 'GUI_DOWNLOAD'
     exporting
          filename = 'c:\test.html'
     tables
          data_tab = ihtml.
Reward points if it is helpful
Thanks
Seshu

Bapi Function call from Crystal reports 2008. import parameters syntax.

Dear,
I have an issue with calling a function directly from Crystal reports (2008) in the R3 system.
(if this belongs in another thread , please add the link if moved !)
I try to get data through function "BAPI_CLASS_GET_CLASSIFICATIONS".
Till now all possible input parameters have no data-result.
I already read other threads stating that 'for example' the Language key needs to be provided in a single character. 'E' in stead of 'EN'.
I also already created a Z-wrap-function that fills out all input parameters 'hardcoded'. This works.
clearly there are som syntax changes in passing the values to R3 when called from Crystal Reports.
Can someone state which syntax has to be followed for numeric fields, for datefields etc. (so when i make these dynamical, I know which syntax should be the outcome of the formula)
in my function that doesn't work I use these selections:
(this function is called in a standard report only calling this function)
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_ISO} = "E" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_INT} = "E" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSNUM} = "DSWTEST" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSTYPE} = "001" and
{BAPI_CLASS_GET_CLASSIFICATIONS_1.I_KEY_DATE} = Date (2011, 08, 05)
I already tried other languages or the 'EN' as input.
(I would like to know how the date is passed exaclty to R3.)
The function is of course RFC enabled.
when I call the my Z-function with predefined inputparameters in R3 it does give the wanted result.
FUNCTION ZBAPI_CLASS_GET_CLASSIFICATION.
""Local Interface:
*" TABLES
*"      OBJECT_CLASSIFICATION STRUCTURE BAPI_OBJECT_VALUES
*"      CLASS_OBJECTS STRUCTURE BAPI_CLASS_OBJECTS
data ZOBJECT_CLASSIFICATION type TABLE OF BAPI_OBJECT_VALUES.
data ZCLASS_OBJECTS type TABLE OF BAPI_CLASS_OBJECTS WITH HEADER LINE.
ZCLASS_OBJECTS-OBJECT_KEY = '000000000000000085'.
ZCLASS_OBJECTS-OBJECT_TYPE = 'MARA'.
Append ZCLASS_OBJECTS.
CALL FUNCTION 'BAPI_CLASS_GET_CLASSIFICATIONS'
EXPORTING
    CLASSTYPE                    = '001'
    CLASSNUM                     = 'DSWTEST'
*   KEY_DATE                     = SY-DATUM
*   LANGU_ISO                    =
*   LANGU_INT                    =
*   CHARACTS_OF_CLASS_ONLY       =
* IMPORTING
*   RETURN                       =
TABLES
    OBJECT_CLASSIFICATION        = ZOBJECT_CLASSIFICATION
    CLASS_OBJECTS                = ZCLASS_OBJECTS
OBJECT_CLASSIFICATION[] = ZOBJECT_CLASSIFICATION[].
ENDFUNCTION.
please advise.
once again if this should be moved to another forum , add the link please!

Dear,
I just debugged my Z-function, after adding all input parameters as in the standard BAPI function.
All parameters seems to be passed correctly except from the table parameters from
CLASS_OBJECTS
So all I_parameters are passed :
{ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_INT} = "EN" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_ISO} = "EN" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_KEY_DATE} = Date (2011, 08, 05) and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSNUM} = "DSWTEST" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSTYPE} = "001" and
{ZBAPI_CLASS_GET_CLASSIFICATION.I_CHARACTS_OF_CLASS_ONLY.BAPIFLAG} = ""
but the table parameters aren't coming through:
{ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
{ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
these are 'blanco' in the function.
also after the function is executed and all data is retrieved, when passing the data back to Crystal reports, once again, the table result isn't passed to Crystal Reports.
please advise

Calling function from sql folder vs report

Hi,
A report based on a custom sql folder is taking a long time to run. One of the things that I noticed is that when I run the sql in plsql it takes a long time, but if I remove the row where I call a function, it runs pretty quickly.
In general, is there a difference between running a function from the sql custom folder and calling it from the report itself?
Thanks.
Leah

Hi Tamir,
I might check out the execution plans, but truthfully, understanding the plans and the meaning of the differences is not my strong point.
I thought that maybe there was some general rule that, for instance, it is better to keep functions out of the sql folder and use them in a condition in the report itself, or the opposite, or that maybe it makes no difference at all.
I appreciate the response.
Thanks.
Leah

Calling ORACLE Functions from within CF Builder report

Hi, I have an ORACLE function that I would like to call from within my CF REPORT.
I know there is a section in the report builder where you can write coldfusion code to perform tasks, but I would rather simply call the ORACLE function for each detail row in the report
I do not want to call this function from within my main ORACLE query that I use for the report, so please don't suggest that.
Thanks so much.
-Jim

6.0.5 is not certified against 10g database, so I suggest to upgrade to 6.0.8.26 (6i patch 17) first to see if the problem is gone.

Trouble migrating Crystal Reports Custom Functions from BOXI R2 to BOXI 3.1

I can't seem to migrate the custom functions from the custom function repository in my R2 environment to the 3.1 with FP 1.3 environment.
When I migrate Crystal Reports using the Import Wizard, they all come over and they retain their custom functions, however, they don't bring over or create a new custom function repository.
When I do run the import wizard I have selected the repository radio button, but it does not have any affect .
How can I migrate all of these custom functions without having to manually open up reports and placing them back into the repository on the new server?
Thanks,
Randy

Hi,
so if they are published to Rel.2 this looks different.
Just to clarify it a bit more...these Files are no Datasources for Reports and Universes and your Users dont consume them via InfoView?!
Whats the purpose for these Files? If they have none, you can de- select them in the UMT and dont migrate them (or better said move them cause you wont actually migrate .csv files). But if nobody touches them, you can move them with the UMT during daily business...how long it will take i cant estimate it. But 65GB for .CSV files is a huge amount.
But you are correct, to move them from Rel.2 to BI4 you have to use the UMT.
If you have the ressources and time i would recommend the following (Thats what i usually do with my customers):
1. Setup a Machine (could be a VM) with the same OS and BOE Version (included SPs and FPs) as your production Rel.2
2. Schedule a half day or day Downtime to copy the content 1:1 from the production Rel.2 to the VM Rel.2 with the IW or CMS DB Copy. Or do this after Business Hours.
- With this Size of your FileStore i would recommend the CMS DB copy way.
- Now you have a 1:1 Testing Environment of your Production Environment
3. Use the UMT to migrate from your VM Rel.2 to your BI4 installation
- Here you can see how long it takes
- You can check if the UMT is capable for this 65GB transfer
- Can sort out other possible issues
- Do some other Testing
After you did that you have a perfect estimation on how long the Migration will take and what for issues you are facing. With this information you can decide if you need a downtime or can do it after Business Hours f.e.
Regards
-Seb.

Access Report Custom Functions from code

Post Author: leedo
CA Forum: .NET
Hello,
I am using VS2005 (VB) and was able to change formula text from within code using the "FormulaFieldDefinitions" object. However, I am having problems finding out how I can do the same to Report Custom Functions. The reason I am doing all this is that I noticed during my Windows app is running the source of my .rpt file is thrown in the user "Local Settings\Temp" folder and all code is revealed by simply opening that file. Please help. ThanksLeedo

Post Author: MJ@BOBJ
CA Forum: .NET
It looks like it is not possible to access the custom functions within a report using the CR .NET SDK. However, to address the potential security issue that you may be concerned about, is this a Windows or ASP.NET application? If this is an ASP.NET application, then you shouldn't have to worry about the security as the end-user (client) will not be able to access that folder since the rest of the web server is typically unaccessible by the client.
Another way to secure your reports is to use what we call "managed reporting" solutions such as Crystal Report Server or Business Objects Enterprise, which manages reports securely and your users are only allowed to access/see what you allow them to. These solutions also provide public SDKs so you could incorporate the system into your own applications. For more information, go to www.businessobjects.com/products.

Calling javascript function from report customization form

I have been unable to call any user-defined javascript function from Portal Report Customization forms.
Even a simple Message Box function doesn't work. I've been placing my code in the ..after header PL/SQL section for the report customization form.
htp.p('<script type="javascript">');
htp.p('function MsgBox(message){');
htp.p('alert(message);}');
htp.p('</script>');
htp.p('See if it works');
I have verified in plain html that my syntax is fine. Even the syntax rendered by portal is correct:
<script type="javascript">
function MsgBox(message){
alert(message);}
</script>
See if it works
Despite this, you will get a javascript error that an Object is expected, MsgBox not defined. Clearly from the script above MsgBox is defined.
I have tried any number of calls to user defined functions and can't get anything to work. However, calling native functions like 'alert' works fine ( ie
See if it works
Anyone know how I can call a user defined javascript function in a Portal Report Customization form?

Try changing the code
htp.p('<script type="javascript">');
to
htp.p('<script language="javascript">');
Thanks
-Krishnamurthy

GOTO Functionality from BW Report to Transaction on Portal

Similar Messages

Maybe you are looking for