GR/IR account setup

Does anyone know of any risks, if I setup multipal GI/IR accounts? In other words
I will have Plant A with X, and Plant B with Y. Both using the same supplier, but managed in a different area. for this reason I want to ensure that the GR/IR is Split in the different B areas.
Thanks Malcolm

So you are saying i should assign a consumption account to GBB-VKA?
Lets assume i do that . So when i do a GR the entry is
Dr GBB-VKA consumption
Cr WRX GR/IR .
When I do a delivery on PGI the entry should be as below right .
Cr Consumtion ( Same g/l as GBB-VKA)
Dr COGS .
To do this it will need a new movement type .
But in standard schedule line CB the movement type is 601 . How will system pick this Consumption account ??

Similar Messages

  • Balancing Segment Value assignment to Legal Entity using Account Setup Mgr

    Hello,
    This is on r12.06
    By mistake- I did not assign BSV at Legal Entity level, insteady I directly assigned at Ledger level. Now, I am getting following error when running "Accounting Program" standard program
    The subledger journal entry contains lines with balancing segment values that are not assigned to any legal entity.  Unassigned balancing segments cannot be used to balance a subledger journal entry with balancing segments already assigned to a legal entity.  Either update the balancing segment value assignments for the ledger ADP/Claims Solutions Group or update the balancing segment values used on the subledger journal entry Upon research, It was discovered that that the Balancing segment is assigned only at ledger level and it is not assigned at Legal Entity level in account setup manager.
    When I attempted to assign the BSV at LE level, it is not showing the BSV in list of values.
    I even end dated BS at ledger level and tried again but still the concerned BSV is not showing up in LOV at Legal entity level.
    Now I am completely stuck. Any idea what am I missing? Why, the new BSV is not showing up at LE level LOV when attempting to assign BSV at LE level?
    Thank you for reading this post in advance.
    Regards,
    R

    Once a BSV is assigned to the ledger it does not appear in the LOV of BSV-LE assignment field. Pl see if you can delete the BSV from ledger assignment, then only you can re-assign to LE. In my opinion, it allows you to delete the BSV from ledger level if you have not already used it in transactions. In your case, I wonder if it will allow you to delete it. If not, you have to raise SR with Oracle support.
    Thanks
    Tarun

  • Mobile account setup stops syncing and acts like a network user

    Mobile account setup stops syncing and acts like a network user system under ODM
    Setup: Mobile laptop users authenticating against an ODM. Every user has a networked home directory on an Xserve. The whole setup is 10.4 (client and server). All systems run a standard image. Most effected systems have been re-imaged since the onset of the issue.
    Issue: Some of the users are not syncing properly every time. It is as if the system forgets it is a mobile system and reverts to using the User's network home (instead of saving to /Users and syncing). If the user is effected, the system will not even accept cached credentials if they are off network. This forgetfulness does not seem to follow any pattern and does not effect all of our mobile users.
    In mucking about trying to find a cause to this issue I ran across an oddity in all effected systems Netinfo database. The users are each listed twice. Each entry has the same username, short name and UID. Also, In each case one record looks wrong... this varies somewhat from user to user, but in each case there is marked difference in the record's contents. Deleting the incomplete record in Netinfo manager seems to solve the issue (seems, as we are very early in testing this).
    Anyone have a clues as to where this double came from? The only lead so far is that it looks like the users having issues pre-date the use of mobile accounts. At some time they all had local accounts that authenticated against the ODM but never synced or had networked home directories. The pool of users who just got laptops (and thus never had a local account) seem unaffected so far.
    Also, what is the best way to browse the ODM master to find these duplicates?

    I have a similar issue with computers bound to Active Directory. Users occasionally have a problem logging into their computers even though their account is fine. Logging in as Admin and running netinfo manager always shows duplicate user accounts. Deleting the one that says disabled always clears up the issue. I'd like to find a startup script that would delete the disabled account, thus preventing the issue.

  • SAP Add On for Crystal Reports - no window for account setup

    Already installed the add on: windows server 2008 64 bit / SAP Business One 8.8 PL 12.
    Crystal Runtime is installed too.
    After activating the add on, we tried to do the 'account setup'.
    But there was a error: ' Item - could not commit action because the item is currently in focus [66000-23].
    Anyone there to help us solving ?
    thx

    To solve the issue you must launch the following queris on SQL Server Manager:
    CREATE TABLE [dbo].[SAP_CR_REPORT_GROUP](
         [GroupName] [nvarchar](50) NULL,
         [RowId] [numeric](18, 0) IDENTITY(1,1) NOT NULL
    ) ON [PRIMARY]
    CREATE TABLE [dbo].[SAP_CR_REPORT_GROUPUSER](
         [UserId] [numeric](5, 0) NULL,
         [GroupId] [char](10) NULL,
         [RowId] [numeric](18, 0) IDENTITY(1,1) NOT NULL
    ) ON [PRIMARY]
    CREATE TABLE [dbo].[SAP_CR_REPORT_REPORT](
         [ReportName] [nvarchar](50) NULL,
         [ReportDescription] [nvarchar](100) NULL,
         [ReportPath] [nvarchar](1000) NULL,
         [IsPublic] [char](1) NULL,
         [ModuleUID] [char](20) NULL,
         [RowId] [numeric](18, 0) IDENTITY(1,1) NOT NULL
    ) ON [PRIMARY]
    CREATE TABLE [dbo].[SAP_CR_REPORT_REPORTGROUP](
         [ReportId] [numeric](18, 0) NULL,
         [GroupId] [numeric](18, 0) NULL,
         [RowId] [numeric](18, 0) IDENTITY(1,1) NOT NULL
    ) ON [PRIMARY]

  • Why is the "From:" field being changed in Mac Mail.  I have multiple gmail accounts setup and it seems to change the "FROM" field even though I've selected which account to use to send the email.

    So
    I've got multiple gmail accounts setup in Mac Mail.
    Somtimes when I send or forward emails, it uses the wrong FROM field even though I'm declaring
    specifically which account to use.
    This becomes apparent when the person replies to my message and it goes to the wrong account

    Check you accounts in Mail and make sure each account has the correct outgoing server address. Check the box to use only that server.
    Second, go to the gmail website and in settings under the account tab, make sure you have the correct settings for replying to messages.

  • I'm trying to have existing Exchange accounts setup on my new iMac and can't get it to work.

    I have existing Exchange accounts setup on my iPhone and iPad to access my work email.  I'm trying to do the same on my new iMac and can't get it to work.  I have it setup the same as my iPad and it asks me for my password over and over...any suggestions?
    <Re-Titled By Host>

    Hi mwatts18,
    As a preliminary troubleshooting step, you should reference the information in the following article:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    I would especially suggest that you delete the account and re-add it, making sure that you are entering the correct password when you add the account. Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address. Is there a way to see the IP address of my Mac through iCloud?

    My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address for the police to go and claim it. Is there a way to see the IP address of my Mac through iCloud? I've tried to get the IP address through Gmail and Dropbox but no success. Is there any software that updates automatically that I could find the IP address through?

    Shouldn't the IP address be on the box you bought the machine in? If you have the box, take it to the police as evidence that it's your machine. If I were you, I would set the firmware password when you get it back, but make sure you have the password written down in a safe place. If you forget it, there's only two ways to reset it. Either pay $400+ for the tool that can do it, or pay almost nothing for Apple to do it, I think it depends on where you live. The firmware password is this encrypted password and it can't be hacked either. The password prevents anyone from booting the machine into recovery mode, thus preventing them from restoring the computer to factory settings or performing any other functions. It's not stored in the hard drive so replacing that will be of no use either.
    I hope you get your Mac back and I hope this was helpful!

  • I am a teacher that uses the iPad in the classroom.  I have an itunes account setup for my classroom without a credit card listed. Is there anyway for me to purchase apps to use in the classroom with a Purchase Order?

    I am a teacher that uses the iPad in the classroom.  I have an itunes account setup for my classroom without a credit card listed. Is there anyway for me to purchase apps to use in the classroom with a Purchase Order?

    (Being sarcastic - its because only the US is big or important enough to warrant volume licensing....)
    At this time, until Apple decides to release volume licensing structures outside of the US the only solution would be to use your purchase orders with a company that sells the iTunes Vouchers and redeem those.
    However - even then its hard to stay on the right side of the EULA when the terms are all couched in reference to "Personal Use"
    I have spoken to some developers in the past about educational discounts, or even support for proxies, and wasn't really impressed with their answers.   But hey - even Adobe has trouble with proxies and consistent approaches - we can't expect independent developers to be able to match the same capabilities...

  • Cannot amend Bank account in House Bank Accounts-setup

    Hi,
    Customer is using 2007A PL30
    With recent bank merging, a new bank account had been given to its customer. As such, customer would like to amend Account No field in House Bank Accounts-Setup but hit errors "Fields cannot be updated" Customer would like to continue posting into same G/L account for both incoming and outgoing payment history and bank reconciliation process purpose.
    Regards
    Thomas
    Edited by: Thomas Lai on Mar 4, 2009 10:27 AM

    A new bank account has to be setup.  You should not let customer to change their exist code.  A history has to be kept untouched for all financial records.
    Thanks,
    Gordon

  • Accounting Setups - Step Complete

    Hi all. I am new to Oracle R12.
    I am in the process of Accounting Setups - Reporting Currencies.
    I mistakenly clicked on Complete in the Reporting Currencies - Setup Step.
    It is now showing Green but I need to update the Currencies entries.
    Is there any way of opening up a Step once the Setup Step has been ticked as completed?
    Thanks...

    You took the trouble to create a thread to ask others for help; you took the trouble to reply saying you figured it out; you took the trouble to mark the thread as answered.
    Can you take the trouble to post the solution so other people who have the same problem in future can get help?

  • Evernote Account Setup Failure

    I cannot get the account setup for Evernote to work on a Z10.
    What's occurring: 
    Setup->Accounts->Add Account->Evernote
        evernote login page shown.
    I enter user name and password, click on "Sign in"
        Evernote website goes to next page
    I click on "Authorize"
        immediately I get an "Error: Couldn't connect to the server" and it shows a "Try again" button
    I click "Try Again"
    Evernote website displays 'Missing required oauth parameter "oauth_token"' and dead ends.
    There is a 'cancel' button ribbon at the top of the screen for the whole duration, so I think I am still in the normal account setup.  Anyone else have same problem?  Is there a workaround?
    From Evernote's perspective, the Blackberry is being authorized correctly, it is visible as a new device in the Evernote account logs.  But the blackberry does not appear to be capturing the oauth token, nor completing the account setup process. I can't tell which side of the equation (Blackberry account setup vs. Evernote website) is screwed up.
    Evernote customer support will not provide support.
    I'm running latest OS on a Z10.
    I can't think of any interfering service or web configuration.  I've tried over cellular and wifi data services.

    Have exact same problem and response from Evernote.  The first Z10 I had sent through the Evernote setup with no problem and was working great.  That device was faulty and had to get another.  2nd one has the problem.  Will monitor this thread for updates.

  • Email account setup icon

    Hi,
    I bought new blackberry 9320, and did a switch from my BB 9700. The email stop working. I deleted the email account setup application in the setup icon, before now I can click on the email account icon and it will open, but now it can't open again.
    Please I need help on what to do to enable reinstall tha application so as to open it and create an email account
    Thanks

    Hello confido4jc
    Which link is not working  , also explain where you're having problem so that we can assist .
    First of all Connect your device and run BlackBerry Desktop Software Click on Application > Wait till the application list refresh, then scroll down and see if you are able to view email setup within that list , if you see that Click on + beside that application to install that on your device, while doing so be sure that your computer has active  Internet .
    So please explain what steps you performed within that knowledge base where you're having problem.
    Let us know.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Exchange option in Account setup missing?

    I had Mail hooked up to an Exchange server for my work email. That stopped working for some weird reason so I thought about re-creating the account and I don't see the Exchange option in the account setup anymore. Where'd it go?

    it's probably hardware. it's actually linux operation system and comes with pre-loaded operation system. did you make any changes on volumes?
    edit:typo 

  • Nokia Mail - "Other" Account Setup Not Working

    Help.  Nokia Mail Other/Manual Setup Not Accessible.
    A previously manually setup IMAP account got deleted from my C3-00.
    It is an account that requires manual setup, but when I tried to set it up again under "Other" the Nokia Mail App will no longer let me.  It had been working before and I inputted manual settings when it was previously set up.
    Now under "Other" instead of going from the mail address and password screen to the manual setup (POP3/IMAP) screen it just says: "Could not sign in. Try again."
    The email address is on the @mytyndale.ca and I need to input these settings manually:
     IMAP setting:  Server name: pod51011.outlook.com  // Port: 993 // Encryption method: SSL
    SMTP setting: Server name: pod51011.outlook.com // Port: 587 // Encryption method: TLS
    Please help or fix this for me. 
    If there is a way to force manual setup that I am missing let me know about that.
    NOTE: I was able to get the account setup by putting in an incorrect email address and then putting the correct login information in the manual setup  set up sceeen.  But Nokia Mail will not let my change my email address after the setup has been made.
    Phone Model: Nokia C3-00
    Firmware: 08.63
    Mail Revision: 2.0.24

    SunshineBC, on your desktop computer, when you go for webmail.eastlink.ca, are you able to login with your password? (double-checks we are using the right credentials). Are you able to log-in via webmail.dccnet.com?
    Now, let us double check the origin of your request (IP address outside of Canada). Please, try the same from within the Nokia browser of your phone because it does use a proxy based IP address. Does it work? If yes, please, try Opera Mini as well – because that useses yet another IP address. In all these browsers (yours on your desktop, in Nokia browser, and in Opera Mini), please, check your IP with my-ip.mobi. Please post your IPs and results (worked, did not work) and I check the location of that IPs if there is a did-not-work. Perhaps Eastlink has an outside filter in combination with some passwords – the procedures above checks that.

  • How to leave account setup screen

    recently I upgraded to OSx Yosemite, and needed to remake an admin account using the mount -uw and .applesetupdone, but once I finish with the new account setup, it says "creating account" and then goes back to the "welcome, choose country" screen and makes me go through the account setup again. The proceas restarts every time the setup finishes. How can I get back to my accounts and away from this setup screen?

    Uprise78, its apparent that you love the SDK just as it is and take the problems as personal challenges to be overcome. That is fine.
    I like the iPhone, I like Apple, but I'm not satisfied with the current iPhone SDK and I want Apple to make it a real platform where I do not have to be ingenious to get the basics that a platform should provide. Moreover whole classes of applications that should be possible are just out of the question. Its a big step forward from Brew, Rex and the like. I don't plan to go back there nor do I plan to develop for WinMobile again any time soon. But it's more than just "low level goodies" that are missing here and saying that ingenuity is all that is needed a pretty naive statement. I would rather see developers empowered by the platform than spending effort overcoming its (artificial) obstacles.
    The point that was missed is that Apple drastically changed the landscape in mobile and soon its going to evolve further with Android and Windows Mobile and their forthcoming distribution models. Its a reality that Apple will soon be faced with and from what I have seen it stands to be a tough fight where it could have been (and potentially still could be) a cake walk. At the end of the day I would rather stand on the winning side with Apple but there are problems and there are many who have concerns that Apple is not making the right choices with regard to developers and the SDK.

  • Error in loading accounting setup

    Hi,
    When I am trying to load accounting setup through isetup I am getting the below error for a particular Ledger ID.
    ## Detail 0 ##
    oracle.apps.fnd.framework.OAException: An error occured trying to retrieve data using the <UserConversionType> attribute.
         at oracle.apps.gl.ispeed.config.server.GLLedgersVORowImpl.setUserConversionType(GLLedgersVORowImpl.java:1459)
         at oracle.apps.gl.ispeed.config.server.GLLedgersVORowImpl.setAttrInvokeAccessor(GLLedgersVORowImpl.java:2705)
         at oracle.jbo.server.ViewRowImpl.setAttribute(ViewRowImpl.java:838)
         at oracle.apps.fnd.framework.server.OAViewRowImpl.setAttribute(OAViewRowImpl.java:239)
         at oracle.apps.az.fwk.server.BEImport.setRowAttributeValues(BEImport.java:1169)
         at oracle.apps.az.fwk.server.BEImport.insertOrUpdateRowWithAtts(BEImport.java:1489)
         at oracle.apps.az.fwk.server.BEImport.processOneRecord(BEImport.java:2094)
         at oracle.apps.az.fwk.server.BEImport.startElement(BEImport.java:590)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:206)
         at oracle.apps.az.fwk.server.BEImport.importXML(BEImport.java:386)
         at oracle.apps.az.fwk.server.BEApplicationModuleImpl.importFromXML(BEApplicationModuleImpl.java:424)
         at oracle.apps.gl.ispeed.config.server.GLLedgerConfigurationsAMImpl.importFromXML(GLLedgerConfigurationsAMImpl.java:264)
         at oracle.apps.az.r12.api.BC4JAPI.importAPI(BC4JAPI.java:981)
         at oracle.apps.az.r12.loader.cpserver.APILoader$APIExecuter.run(APILoader.java:665)
    This ledger has Average balance enabled with foreign currency translation rate type as Corporate.But when I try to inquire the journals for this ledger ID the journals have currency rate type as User. I found that in Average balance enabled type of ledgers we cannot have User rate type for currency translation.
    Is this the reason that I am not able to fetch the records?.If not what can be the reason for such type of error ?
    How to resolve this error?

    Please post the details of the application release, database version and OS.
    Please see these docs.
    R12.1: Loading Payables Option Extract into Target Fails with the Following Exception: java.lang.NullPointerException [ID 1323037.1]
    AZR12LOADER Failed with An exception occurred in API 'Chart Of Accounts API' [ID 832383.1]
    iSsetup Migrations Error Fails For Valuesets Using HR_LOOKUPS For Lookup Using Tags [ID 782030.1]
    How To Import Foundation Data into target instance from souce instanceusing iSetup [ID 790001.1]
    Thanks,
    Hussein

Maybe you are looking for