GR / IR issue for two PO's

Dear Experts,
Can we do One GR and IV for two Purchase orders.
vendor has sent one invoice against two Purchase orders I want to make adjust the same with one GR and Invoice (MIRO).
If it is possible please let me know.
Regards,
JA

Hi,
You will have to post separate GRs for each purchase order but at the time of IV you select directly vendor and enter the invoice for both POs.
Please let me know if it helps!!
Regards,

Similar Messages

[svn:fx-trunk] 12994: * Fixes for two issues that were showing up in FB.

Revision: 12994
Revision: 12994
Author:   [email protected]
Date:     2009-12-16 06:44:45 -0800 (Wed, 16 Dec 2009)
Log Message:
Fixes for two issues that were showing up in FB.
QE notes:
Doc notes:
Bugs: SDK-24669, SDK-24686
Reviewer: Corey
Cycloner: George
Tests run: checkintests
Is noteworthy for integration: yes, fixes two FB issues.
Code-level description of changes:
modules/compiler/src/java/flex2/tools/PreLink.java
    Modified postRun() to swap in the root CompilationUnit's Logger
    when validating it's StyleContainer. This allows the warnings
    from StylesContainer.validate() to be persisted across incremental
    compilations. This fixes SDK-24686.
modules/compiler/src/java/flex2/compiler/Source.java
    Made getLogger() public, so it could be called from PreLink.
modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    Modified compile() to check forcedToStop() after each PreLink
    batch. This fixes SDK-24669.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24669
    http://bugs.adobe.com/jira/browse/SDK-24686
    http://bugs.adobe.com/jira/browse/SDK-24686
    http://bugs.adobe.com/jira/browse/SDK-24669
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/Source.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/CULinkable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

[svn:fx-trunk] 13169: * Fixes for two FB issues and two regressions caused by recent fixes.

Revision: 13169
Revision: 13169
Author:   [email protected]
Date:     2009-12-22 14:39:59 -0800 (Tue, 22 Dec 2009)
Log Message:
Fixes for two FB issues and two regressions caused by recent fixes.
QE notes:
Doc notes:
Bugs: SDK-24708, SDK-24668, SDK-24827, SDK-24829
Reviewer: Corey
Tests run: checkintests, com.adobe.flexbuilder.project JUnit tests
Is noteworthy for integration: Yes, fixes two FB issues
Code-level description of changes:
modules/compiler/src/java/flex2/tools/oem/Library.java
modules/compiler/src/java/flex2/tools/Compc.java
modules/compiler/src/java/flex2/tools/Fcsh.java
modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
    Modified calls into SwcAPI's setupClasses() and
    setupNamespaceComponents() to pass in the SourceList.
modules/compiler/src/java/flex2/tools/VersionInfo.java
    Added null check to getBuild().
modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    Modified compile() to only add elements of "classes" to "sources"
    if not already contained. This covers the case of a Source being
    in the SourceList and the manifest.
modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
    Modified setupClasses() and setupNamespaceComponents() to check the
    SourceList before the SourcePath when looking up sources.
modules/compiler/src/java/flex2/compiler/SourceList.java
    Made getPaths() public.
modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    Modified setState() to skip disconnecting the root's Logger. This
    fixes SDK-24827 and SDK-24829.
modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java
    Added sourceList variable, modified procressSources() to
    initialize it, and modified init() to recursively store a
    timestamp for each path in the SourceList. This fixes SDK-24708.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24708
    http://bugs.adobe.com/jira/browse/SDK-24668
    http://bugs.adobe.com/jira/browse/SDK-24827
    http://bugs.adobe.com/jira/browse/SDK-24829
    http://bugs.adobe.com/jira/browse/SDK-24827
    http://bugs.adobe.com/jira/browse/SDK-24829
    http://bugs.adobe.com/jira/browse/SDK-24708
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SourceList.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SignatureExtension.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Compc.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Fcsh.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/VersionInfo.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java

How to do Apache configuration for two different domains

Hi ,
I was just trying out some clustering workshop on weblogic. I faced a issue..here is the scenario :
I have two clusters :
Cluster1 : 3 managed servers (server1,server2,server3)
Cluster2 : 2managed servers (server4,server5)
I have two sample applications which i have deployed on these two clusters i.e app1 on cluster1 and app2 on cluster2.
These two aplications are deployed successsfully as i am able to open these applicatons from browser by calling the individual port of the managed server like : http://localhost:7003/app1.
Now i have installed a apache server on my laptop and configured the http.conf file.
Issue : I am not able to call both the application from apache. If there is only one cluster then it is working fine and for two application only one cluster (application) is working that too whose port is defined in the last.
Here are the contents of my httpd.conf file :
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl.so
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
*<IfModule mod_weblogic.c>*
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
*</IfModule>*
*<Location /weblogic>*
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
*</Location>*
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin <adminurl>
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName <servername>
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://<url>/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402<url>/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
So here for the above configuration only app2 i am able to call and for app1 its saying "404 page not found".
Can soomebody help me in cofiguring apache so that i can call both the applications.
Thanks,
Ankit

>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
</Location>
>
This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
Try something like this ...
<Location /app1>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
</Location>
<Location /app2>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
</Location>
where /app1 and /app2 are contexts of your weblogic applications.
http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
http://httpd.apache.org/docs/2.0/mod/core.html#location

Issue for Form 16 and tax Computation on Salary to Employees

Dear All
Can Anybody suggest a way out for the following -
We have to issue form 16 as per Indian income tax laws to employees. is there any method for computation of tax on salary or any development is required for the same. As per the Indian income Tax law a computation sheet is to be issued to an emmployee wherein his actaul salary earned ( say for two months) plus his estimated salary for remaining 10 months is to be given and employee in turn returns back the form duly signed in. how this computation sheet works in SAP ?
Pl guide.
Regards
Rakesh Choudhary

Hi Rakesh,
this computation happens inside INTAX payroll function for India Payroll. ya its true that there is no standard SAP report to do this. But u can all the annual computation wage type in the RT (/4** wage types).
If u want a seperate report to this then u can go for some Z development. But u dnt need to write the whole computation logic inside that. Instead of this u can use /4** wage types for the same.
Regards,
Praveen
Edited by: Praveen Kr Tiwari on Apr 11, 2009 3:30 PM

I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

How to create a single delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incoterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Prerequisite for Grouped delivery
1. Header data should be same like Inco terms,Payment terms
Go to VL10A
Enter the sales order Numbers and execute
Select the sales order Nos for the group delivery and select "Background" Tab in Tool Menu Bar
If delivery is created coloured line items will get generated
Check the log for delivery docuements
Check and confirm
Senthils

Print layout - Goods issue & Issue for Production

I designed two print layouts separately 1 in Goods issue for Goods issue in inventory module
and 1 in Issue for production for Issue for production in production module.
If i take a print preview or print in Issue for production , it will reflects the print layout designed in Goods issue.
regards
kavitha S

Hi Kavitha,
I think, are you duplicate the Goods issue PLD Template to Issue for Production PLD Template on Duplicate Layout Template.
Best, Try to create a New PLD from Issue for Production(System) PLD.
Regards,
Madhan.

Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

Hi all. We're having a odd issue with two guests on our 2012 R2 failover cluster.
In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC. Interestingly, that had no affect on server B's connectivity.
The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.
Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.
Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
Thanks!
George Moore

Hi Sir,
I'v never seen this before .
>>Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
They are connecting to same virtual switch ?
First please run cluster validation to check if there is any error .
If it is ok , please try the following items for troubleshooting :
1. shutdown serverA serverB
2. then add another virtual NIC for serverB
3. start server B check if the issue happens to both "old" and "new" virtual NIC .
In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
Best Regards,
Elton Ji
If it is not the answer please unmark it to continue
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How to create one delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incorterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Hi
To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
Finally See Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
Regards
Eduardo

How to configure time synchronization for two NTP servers

We have IOSXR 4.2.1 on routers CRS3 and ASR9K with all recomended SMUs; we need to configure the time synchronization for two NTP servers with the configuration below, but the routers became unstable; synchronize with one NTP servers for some time, then switch to other NTP server, and keep doing this. Anyone know why this behavior?
ntp
authentication-key 1 md5 encrypted 01070F074F0A05
authenticate
trusted-key 1
server 10.192.32.32 prefer
server 10.192.32.33
source Loopback50
update-calendar
RP/0/RP0/CPU0:DFCRSDTC1#sh log | i ntp
Wed Jul 10 09:37:04.621 BRSPO
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.32 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:29:27 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.32 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:31:36 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:40:11 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:50:52 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : System clock selection failed
RP/0/RP0/CPU0:Jul 4 21:50:52 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->6.
RP/0/RP0/CPU0:Jul 4 21:59:26 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 6->2.
RP/0/RP0/CPU0:Jul 4 22:25:07 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : System clock selection failed
RP/0/RP0/CPU0:Jul 4 22:25:07 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->6.
RP/0/RP0/CPU0:Jul 4 22:56:16 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 22:56:16 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.

Hi Claudio, that ddts is pretty generic to be honest but yes it is filed to address sync issues in the XR NTP algo.
The thing is that XR ntp clock selection is a bit different then iOS and follows the specs very closely which results in this erroneous loss behavior.
For instance, you could also see this issue with a sync loss if the update time is only 500msec off what it was before and that will result in a ntp sync loss rather then adjusting to it.
Also I wanted to mention that the ntp prefer is a bit of a misnomer in XR (since it follows the specs differently then IOS) and this knob was taken over from IOS really.
You might get some joy if you set it to one server only and see if that helps?
regards
xander

One username for two tunnel in IPSec remote access vpn + ACS for authentication

Hi all,
I want to set up a username which can be used for two different IPSec tunnel (i.e. username USER1 can be used in tunnel TUN1 and TUN2). Can anyone help me how to do this? My current configuration is that I tied the username to tunnel group using group-lock (RADIUS property) so a username can only be used for a particular remote access vpn tunnel (USER1 can only be used for TUN1). I have already tried to enable multiple entry for group lock in ACS (by manipulating the dictionaru setting in ACS), but it seems that authentication still takes the first group and can not take the second group.

You'd have to create a new AAA server group pointing to servers in the new domain for authentication.
Then make a new connection profile that uses that AAA server group.
Your users would have to choose the connection profile (absent some more advanced tricks like issuing them user certificates that can be checked for attributes which map to one profile or another).
This could also be done with ISE 1.3 which can act as the RADIUS server and join to multiple AD domains on the backend as identity stores. (or even with ISE 1.2 if you use one of the AD directories as an LDAP store vs. native AD).

Semi-Scientific Test on iPhone 4S Battery Issue w/two iPhone 4Ss

All,
My wife and I ordered identical 16 GB iPhone 4Ss. They were set up the same way. From the very start, I could tell that her battery was outperforming mine.
After a day of turning off and on various settings, from Location Services, to Siri, to iTunes settings, etc. I still noticed a huge gap in stand-by performance. I was losing 1% per 10 minutes, her phone was not.
Today, we had similiar usage with similar network characteristics (WiFi, decent 3G coverage) starting from a full charge (100%). After 8 hours, her phone still had 52% remaining. Mine died on the way home from work.
So tonight, I performed a test. I plugged both phones up and allowed them to fully charge to 100%. While plugged up, I ensured each setting on the phone were identical, including the number of Exchange accounts, brightness level, etc. At 9pm CDT, I unplugged them. My phone took a long time to get from 99% to 100%, her phone didn't. Mine also went to 99% upon unplug, her's didn't.
Neither phone was used at all, stayed completely in stand-by mode. At 10:15pm CDT, ...her phone remains at 100%. Mine is now at 92%. That's roughly 1% every 10 minutes on my phone, same thing I saw earlier in the day.
I think this, for me at least, confirms the diverse results folks are seeing. Some folks are seeing major battery issues, some are seeing better battery life over other iOS devices. It just so happens in our house, we have one of each. Why would two identical phones behave so differently? I've exahusted all possible options on my phone, including the recently posted attempt at deleting e-mail accounts and resetting network settings.
Does Apple recommend that I do a restore on my phone? I am trying to do so, but I am having issues re-downloading iOS 5. If I still see the same battery drain, I believe I will take this into the Genius bar.
I do believe it's time that Apple address this battery issue. I for one, based on experience, believe it's real, and could be a manufacturing defect. I don't know how else to explain two identical phones having vastly different stand-by results if my restore fails to fix the issue.

After spending 2 days troubleshooting I have found my battery drain culprit. When I turn my wifi on it coninuously disconnects and reconnects to my network. This was draining my battery about 1% every 4 minutes. I went through all the turn this stuff off, reset network settings, setup phone as new, helped some but still had the issue. This morning I set mine and my wife's up the same, she went to work and was playing music on the way in. Still had 100% after 40 minutes. I was at home with wifi on and dropped to 90%.
I charged my battery back up, turned wifi off and now after an hour still have 100%. This is with siri on, icloud on, notifications on, etc.
Can anyone else confirn this is an issue for them. I am trying to determine if it is hardware or software related.
Thanks

Memory Leak Issue for Adobe Access iOS API

Hi,
We are trying to develop an iOS app (with ARC enabled) using Adobe Acces API 4.0 and we have identified that the function [drmManager createDRMSession] has memory leak.
DRMSESSION = [drmManager createDRMSession:METADATA playlist:PLAYLIST error:nil complete:^() {}];
We are using:
DRMSESSION -> weak
METADATA ->strong (as need to share within object)
PLAYLIST ->strong (as need to share within object)
After calling this function, the object is unable to dealloc and most of the leaking object related to networking (such as CFNetwork...)
Is this a known issue for the Adobe Access iOS API or we are missing some key steps.
Any suggestions is appreciated. Thanks in advance.

ans0600, sorry about that, I read Hiroshi's forward too quickly. I've done a little digging and have come up with two work-arounds:
Create a file with ARC disabled to translate the returned object to be an autorelease
declare the returned DRMSession as __unsafe_unretained and use CFRelease, as noted on stackexchange
In the future we may change this method to return an autoreleased object to avoid this issue. Let us know if you have any further questions!

Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)

Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
apart, piece by piece. Next step is probably losing my data or not loading it at all.
THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
weeks!
So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?

The brandings are fun. Here's this same thread in a bunch of flavors:
https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

GR / IR issue for two PO's

Similar Messages

Maybe you are looking for