Graph line texturing
Applying a texture or gradient to a line series in the BI Beans graph (from JClient) using the SFX component only results in a white line. The same code gives the right result for bar series.
Is this supported?
We're trying to get dot patterns on the lines to help color blind users.
Danny,
as far as i know its not possible to have them dotted. However, beside of different line width you could use markers with different symbols that should do it.
m_graph.setGraphType(Graph.LINE_VERT_ABS);
m_graph.setMarkerDisplayed();
m_graph.setMarkerShapeInLegend();
You can customize the marker symbol on the individual series.
Frank
Similar Messages
-
How can i dynamically vary the color of one graph line
I was looking on the developer zone and noticed several people are looking for a way to change the color of one graph line. Simplest case I would like to know: a graph is running, then you press a button and from that point on the color of the graph changes, but doesnt change the old data line color. THis way the line will consist of different colors.
The property node changes the whole line, and the line is always just one color. It should be possible to make the line consist of different color sections, anyone know how?The application is actually not as slow as it seemed, i had some settings set wrong (anti aliasing in plot, and some functions in advanced, when you right click on the graph)
Especially unchecking the anti-aliasing makes it much faster
Also, just plotting point and not a line, or alternatively, changing the interpolation makes it faster.
Anyway, the attached files do not rely on processor so much anymore, see for yourself
Attachments:
multicolor_looking_plot.vi 99 KB
multicolor_looking_plot_2.vi 105 KB
multicolor_looking_plot_3_truncated_array.vi 99 KB -
I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry -
Problem with Pivot Table with Graph: Line Bar Combo
Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time. -
Graphs- Line Type, How to change line colors
Hi,
Iam developing graph line type with 2 seriese by default it show two colors i.e Blue and Green . But i need red color for one of series. I checked in edit customization also i didnt find any option to change color of line . Pls helpme...
Thanks,
Krishna]Hi,
I think in global settings there is a option.
Refer this link
[customizing graphs|https://docs.google.com/viewer?a=v&q=cache:R1LWS-t_9xcj:www.sdn.sap.com/irj/scn/index%3frid%3d/library/uuid/c0bad079-1779-2c10-a8b1-ba76854ea6d1%26overridelayout%3dtrue+&hl=en&gl=uk&pid=bl&srcid=ADGEEShZuzUOlbxrVLkMLz511amV8K8seqKtGnfF-IXzNr_BRxDiNuT1OBIa0qCjD4Juf_RXul0iXYZJJpFM7foVU3oShbhRnQcFzCT637fSf7v5Qt2jJkHAZkFnfRSFOQZsoKLuatil&sig=AHIEtbRRDGjx1OANmLwZks8AmQfUMpGISQ
Karthik.R -
Line chart How can i change the thickness of the graph line ?
Hello guys,
can i change the thickness of the graph line ?
With kinds regards
BlackCI dunno, but some CSS properties are configurable in CSS as well as code. Others it would seem, can only be set with CSS. If you find a property that does what you are looking for, I suppose you could try using that to determine the code equivalent, if there is one.
-
Make graph line transparent programmatically
Hi,
I would like to be able to make graph lines transparent from within LabVIEW. Is this possible? I can find property nodes for every other property, but I can't see the one which turns on the Transparent bit. Any suggestions?
Thanks,
Ian
Solved!
Go to Solution.Hi Ian,
By "graph lines" I assume you mean the plotted data? If so, then you could use the property node for "plot color", change it to write and then wire a color box constant set to transparent (T) to it.
-CC
"If anyone needs me, I'll be in the Angry Dome!" -
Graphs (line)- not showing timing correctly (X-Axis)
SSRS 2012
Hi guys
My dataset produce a column express as HH:mm:ss. So it means several rows by hours
The report is build up with a graph - Line.
Unfortunately, the Y axis (the horizontal axis showing timing) displays all the records correctly, but the X axis does not display each timing record (labeling).
Question:
how to show each record along the x-Axis (I tried to adjust the setting in the x-Axis properties without success)
ThanksHi Fasttrack2,
As per my understanding, there is a line chart, the records of Y-axis display correctly, labels of X-axis are not displayed entirely. You want to show each label of X-axis.
The axis interval defines the number of labels and accompanying tick marks on an axis. On the value axis, axis intervals provide a consistent measure of the data points on the chart. However, on the category axis, this functionality can cause categories
to appear without axis labels. We can specify the number of intervals we want in the axis Interval property. When we show properly formatted DateTime values on an axis, a chart will automatically display these values as days. To specify a date/time interval
for the x-axis, such as an interval of months or an interval of hours, we must format the axis labels and set the type of axis interval to a valid date or time interval. In this case, if the values displayed on the x-axis must evaluate to a DateTime data type,
we can set x-axis labels’ interval type to seconds by following steps:
Right-click the horizontal, or x-axis, of the chart, and open Horizontal Axis Properties.
Click Number in left pane. From the Category list, select Date, from the Type list, select a date format to apply to the x-axis labels.
Click Axis Options in left pane.
In Interval, type 1. In Interval type property, select Seconds.
For more information about Specify an Axis Interval, please refer to the following document:
http://msdn.microsoft.com/en-us/library/dd239317(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu -
How to break graph lines between 2 years in Answer
Hi gurus
I have a graph that shows current People voluntary turnovers target and actuals for last 12 months
So, for the current period it will show 2009/04 until 2010/03.
I would like my graph lines to be broken between 2009/12 and 2010/01 and not to continue. Can you please let me know how to do that and is it possible at all?Hi,
>
trangie wrote:
> In my ALV Grid the text in column headers are very long. I know we can adjust the width's column and use long text, med text and short text. But in this case, i want the long text break into 2 line in the header. How can I do that?
>
> Thanks for any help.
This is not possible with alv grid.
Regards,
Tarun -
How to show graphs line progressively?
I want to show the line in graphs progressively in Keynote.
Make the line to show gradually.
like this example:
http://www.mathgoodies.com/lessons/graphs/line.html
Hoe to do this?You need to use a Wipe Build, in the Build Inspector. Select the line you want to appear, then apply the build to it.
-
Bar Chart- How to center graph lines
I am very new to Xcelsuis and am fighting with someing that is easy to most, but driving me crazy.
I have a Label Bar that poplulates a list box and when I click on an item in the list box the correct information appears on the bar chart. The problem is that is is all pushed to the bottom of the graph. I need it to space accordingly in the center of the graph.
Please know that I can have anywhere from 1 bar chart line or 40.
Thanks in advance for your assistance.
JPHi JP,
Have you tried the ignore blank cells in series and values options. These are on the behaviour tab.
Regards
Alan -
I am having an unusual problem with the display on my iPhone. A few days ago I started getting about a dozen horizontal lines running from about the mid-point of the screen, some running to the left, others to the right. If you're familiar with line graphs, they look a lot like a histogram. To make it even more weird, some are growing longer every day while others have stayed the same length. Any ideas what's going on?
It sounds like your screen is flaking out. Does a reset (hold the sleep/wake & home button until the Apple logo appears) or a restore in iTunes correct the issue?
If reset or restore does not correct things, the next step is a trip to the Genius Bar - http://apple.com/retail/geniusbar -
i am having line graph with 2 lines . lines are coming thicker by default i want to make one of the line in my graph thinner. how can i do that below is my graph xml
chart:
<Graph seriesEffect="SE_AUTO_GRADIENT" graphType="LINE_VERT_ABS" graphicAntialiasing="true">
<LegendArea visible="true" />
<Title text="Center Growth" visible="true" horizontalAlignment="CENTER">
<GraphFont bold="true" italic="false" underline="false" />
</Title>
<SeriesItems>
<Series id="0" color="#0000FF" />
<Series id="1" color="#FF0000" />
</SeriesItems>
<O1Title text="Weeks" visible="true" />
<Y1Title text="Attendances" visible="true" />
<LocalGridData colCount="{count(xdoxslt:group(.//G_2, 'FWN'))}" rowCount="2">
<RowLabels>
<Label>RSum V</Label>
<Label>RSum</Label>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//G_2" group-by="FWN" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Label>
<xsl:value-of select="current-group()/FWN" />
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each-group select=".//G_2" group-by="FWN" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/RSUM2[.!=''])" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//G_2" group-by="FWN" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/RSUM1[.!=''])" />
</Cell>
</xsl:for-each-group>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
please let me know i what is the code i need to add to make my line line thinner.
i checked line style but it didn't help..is it possible to control line width in line graph.i tried to look for the option to control the width of lines ,not able to find anything on this.
-
Hi:
I'm trying to find a way to draw a series of x,y,z points to a 3d graph with each point linked to the last with a line segment. I have been successfull in plotting a series of points to the 3d graph indicator in LabView but I cannot figure out how to connect them with line segments ... does anyone know how this might be done? Thanks in advance for any help.When the cwlinepoint property is activated the graph draws a line from each point to each point which is not what I'm trying to do ... the code I have written is extremely basic ... three 1d arrays each containing number set (one array with x coordinates, one array with y coords, ect.) these are then passed to the CWGraph3D invoke node ... then the points are plotted to the 3d graph as just points ... which is somewhat usable for what I am trying to do but I was surprised to find out that such a functionality was not already built in to LabView. I thought that there would have been a relatively easy way to do it but I have not been able to find it on my own, so I thought I would put it out there and see if others had already figured it out. My search of the forum yeilded nothing. Again your help is greatly appreciated unclebump!!! Find attached code. Was written in Labview 7.1 but should be usable in 7.0 I think.
Attachments:
3dgraphof point attempt.vi 35 KB -
Why does the line width of a printed chart/graph vary from the on screen width?
Thanks
CMThe line width on a printed chart appears to vary from the screen line width due to the difference in the resolution of a printed page versus the monitor. The reason why it does this is that the screen is approx. 72 dpi. When you make a line that is five pixels wide, it looks like a swath of color. The printer is (typically) 600 dpi. When you make a line that is five pixels wide, it is still five times as wide as the other plot, but it doesn't look like the screen. We prefer to print plot data as finely as possible with the printer resolution so that we are portraying the data as accurately as we can.
Marcus Monroe
Application Engineer
National Instruments
Maybe you are looking for
-
Possible to do limited date range changes in Calendar?
If I set up a filter, say, for days since my last sync AND I'm doing a two-way sync, will only those changes sincy my last sync be synced or will I lose everything not in that date range? Since I make changes to the calendar in Outlook and on the dev
-
Year end closing for fixed asset
Hi, Currently we run the process AJAB to close the year for fixed assets at the end of the year and can close two years back. So in September 07 I would have closed 2006, then run AJRW to open 2008. So it is my understanding that we can only ha
-
My iPhone wouldn't open my messages and each time I tried - it would crash. So I backed up and reset my settings, updated iTunes and ever since my iTunes won't detect my iPhone. I have tried all the troubleshooting options, uninstalled & reinstalled
-
A diagonal line across every cover in the cover flow view
I have a black diagonal line across every cover when use the cover flow view. Even in the iTunes store, in the tv shows or music videos, in cover flow view, I still see a black diagonal line across the cover. I reinstalled iTunes 7.0.2 a few times, b
-
Really ANNOYING Problem_Can Anyone HELP??
Hi everyone, This is my first time posting here, but I hope it will not be my last! My problem is, and I must add here that I have owned a Mac in one form or another since 1988 and I have never come across this. Anyway, at the moment I own an IMac "2