GRC - SQL Query to retrive the Approver/Rejecter Names
Hello,
I was trying to write a sql query to retrive the name of the user who has approved or rejected a particular Approval Notification in GRC Flow rule.
This query should retrive the user , who has taken the action. This user name will be added to the Role, which inturn will be attached to the Approval Group
Thanks,
Gowri
Basically, We have GRC Flow rule, with a process flow written to send Notification
Here we have added a Approver Group with approval type as Wait for Approval and Vote Percentage as 100
Two users are added to the Role which inturn is added to the Approval Group. What is the SQL query to retrieve the Username who has Approval or Rejection for a notification?
Can anyone please help
Thanks,
Gowri
Similar Messages
-
Can anybody provide the SQL query to find the files uploaded in a particular folder?
Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
NevinNevin,
Be great if we could know the version of Portal. For Rel. 1, here's the query
select id,masterthingid from wwv_things
where siteid = &site
and cornerid = &corner
&site - Content Area id
&corner - Folder id
if you don't know the folder id, use
select id from wwv_corners where siteid = &site
and name = &folder
Hope this helps. I have run into this situation before. Usually, the culprits were
one of the following:
1. Junk Characters in description of item (caused due to Copy-Paste)
2. Special Characters in the File name
Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
Nevin -
Give me the sql query which calculte the table size in oracle 10g ecc 6.0
Hi expert,
Please give me the sql query which calculte the table size in oracle 10g ecc 6.0.
RegardsOrkun Gedik wrote:
select segment_name, sum(bytes)/(1024*1024) from dba_segments where segment_name = '<TABLE_NAME>' group by segment_name;
Hi,
This delivers possibly wrong data in MCOD installations.
Depending on Oracle Version and Patchlevel dba_segments does not always have the correct data,
at any time esp. for indexes right after being rebuild parallel (Even in DB02 because it is using USER_SEGMENTS).
Takes a day to get the data back in line (never found out, who did the correction at night, could be RSCOLL00 ?).
Use above statement with "OWNER = " in WHERE for MCOD or connect as schema owner and use USER_SEGMENTS.
Use with
segment_name LIKE '<TABLE_NAME>%'
if you like to see the related indexes as well.
For partitioned objects, a join from dba_tables / dba_indexes to dba_tab_partitions/dba_ind_partitions to dba_segments
might be needed, esp. for hash partitioned tables, depending on how they have been created ( partition names SYS_xxxx).
Volker -
SQL Query to get the # of files in folders in a library
Anyone has the SQL query to list the number of files in each folders in a SharePoint library?
Technically it's a grey area of support as MS don't mind you doing it but won't help you if you encounter problems, the script is much better though.
Scratch that, the script isn't that good. It's using .items which won't work on large lists and is slow. The version below is untested but should be significantly faster and work on large lists.
$starttime = Get-Date
#Creating new site object
$siteurl = Read-Host "Enter the name of your site and press enter"
$site = New-Object Microsoft.SharePoint.SPSite($siteurl)
#Assigning all webs (sites) to $webs
$webs = $site.Allwebs
#System Libraries defined so they won't be touched##
$systemlibs =@("Converted Forms", "Customized Reports", "Documents", "Form Templates",
"Images", "List Template Gallery", "Master Page Gallery", "Pages",
"Reporting Templates", "Site Assets", "Site Collection Documents",
"Site Collection Images", "Site Pages", "Solution Gallery",
"Style Library", "Theme Gallery", "Web Part Gallery", "wfpub")
Write-Host "Total number of webs that will be traversed: " $webs.count
$DocLibsCount = 0
$DocLibwItems = 0
$totalitems = 0
$subfolderitems = 0
foreach($web in $webs)
$listcoll = $web.lists
foreach($list in $listcoll)
if($list -eq $null)
Write-Host
else
$base = $list.GetType()
if($base.name -eq "SPDocumentLibrary")
if ($systemlibs -contains $list)
{ continue}
else
$DocLibsCount += 1
$totalitems += $List.itemcount
$name = $list.Title
$folders = $web.GetFolder($name).SubFolders
for($etr = 0;$etr -lt $folders.count; $etr++)
if($folders[$etr].Name -ne "Forms")
Write-Host "Processing SubFolder ItemCount" -ForegroundColor Red
$tempcount = $folders[$etr].ItemCount
$subfolderitems += $tempcount
Write-Host
Write-Host
Write-Host "Total # of Document Libraries: " $DocLibsCount -ForegroundColor Green
Write-Host "Total # of Document Libraries that contain items: " $DocLibwItems -ForegroundColor Green
Write-Host "Total # of items: " $totalitems -ForegroundColor Green
Write-Host "Total # of items in DocLib\Subfolders: " $subfolderitems -ForegroundColor Green
$finishtime = Get-Date
Write-Host
Write-Host “Script Duration” –ForegroundColor Yellow
Write-Host “Started: “ $starttime –ForegroundColor Yellow
Write-Host “Finished: “ $finishtime –ForegroundColor Yellow
Stop-SPAssignment -Global -
SQL query to list the "Administrative category" field for all applications
yesterday i started a thread to list the "Optional reference" field for all cm applications in a SSRS report. I've got the query with the help of Torsten.
https://social.technet.microsoft.com/Forums/en-US/00419e6e-e3c2-4b80-b6af-2a24ced1032d/sql-query-to-list-the-optional-reference-field-of-all-packages-in-cm-2012?forum=configmanagersdk
But again today, i'm looking for a way to get "Administrative category" field in a SSRS report. Could someone point me to the right direction ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. DelphinHi,
You could monitor the SMSProv.log when you check the category of an application. It shows that SQL query the SCCM provider used is related to function fn_ListCategoryInstances.
Best Regards,
Joyce -
Dear All,
I have a requirement, to write a SQL query to populate the records which are inserted less than 10 no of records.
The tables has the cretaed_date column and along with other key column which will have unique values.
Ex1: The user might have inserted records from application, per week basis, between the date range '01-jun-2013' - 08-jun-2013 , the no of records created by the user during this week may be less than 10 records or more.
But I want to populate the records by giving date range that too, it should pick the records the count which fall with in 10 records.
I dont want the query to populate the records if the user has inserted more than 10 records in a week.
Ex2:
User 1 has created 15 records during the week 1 ( the query should not populate this ).
User 2: has cretaed less than 10 records from the UI during the week 2. ( This details should get populated ).
ThanksUse COUNT to find how many rows where inserted in a week.
If this does not answer your question then please read Re: 2. How do I ask a question on the forums? And provide necessary details. -
SQL query to get the Datetime 06 hours prior to the table Datetime value
Hi Experts,
I'm just trying to create a SQL query to get the Datetime which should be 06 hours prior to my Table column value(Executiontime),
Eg: my Executiontime(column) value is 07:00AM means, this query should fetch the detail of first VMName from table at 01:00AM,
SQL Table Name: TestTable
Columns: VMName(varchar),status(varchar) Executiontime(Datetime)
SQL Query : Select Top 1 VMName from
TestTable where convert(date,Exeutiontime)=convert(date,getdate()) and
status='0' and ExecutionTime > dateadd(hour,6,getdate())
Request someone to alter this Query to my requirement or give me the new one.
Regards,
Sundar
SundarHi All,
Thanks for your Prompt response. I tried the below queries, but still I don't have any luck. Actually the queries are returning the value before the condition met (say when the time difference is more than 06 hours). I want the
query to return exactly @ 06 hour difference or less than 06 hours,
Query 01: Select Top 1 VMName from TestTable where
convert(date,Exeutiontime)=convert(date,getdate())
and status='0'
and ExecutionTime >
dateadd(hour,-6,getdate())
Query 02: Select
Top 1 VMName from TestTable where
status='0'
and ExecutionTime >
dateadd(hour,-6,getdate())
Query 03: Select
Top 1 VMName from TestTable where status='0'
and ExecutionTime >
dateadd(hour,-6,ExecutionTime)
Can someone point out the mistake please.
Regards,
Sundar
Sundar -
Sql query to achive the running division
Hi all, plz help me out with the sql query to achive the below output
create table emp_a (empno number, deptno number, sal number)
insert into emp_a values(901, 10,100);
insert into emp_a values(902, 10,400);
insert into emp_a values(901, 20,300);
insert into emp_a values(902, 20,2100);
i want the ouput in below format
empno deptno sal div_sal
901 10 100 (300/100)
901 20 300 (300/100)
902 10 400 (2100/400)
902 20 2100 (2100/400)
the div_sal column should have the output of greatest sal/second smallest sal for each empnoHi,
781649 wrote:
Hi all, plz help me out with the sql query to achive the below output
create table emp_a (empno number, deptno number, sal number)
insert into emp_a values(901, 10,100);
insert into emp_a values(902, 10,400);
insert into emp_a values(901, 20,300);
insert into emp_a values(902, 20,2100);
i want the ouput in below format
empno deptno sal div_sal
901 10 100 (300/100)
901 20 300 (300/100)
902 10 400 (2100/400)
902 20 2100 (2100/400)
the div_sal column should have the output of greatest sal/second smallest sal for each empnofor empno=901, then second smallest sal is 300. For empno=902, the second smallest sal is 2100.
Instead of "second *smallest* ", do you mean "second *greatest* "?
What if there's a tie (e.g.
INSERT INTO emp_a (empno, deptno, sal) VALUES (903, 10, 300);
INSERT INTO emp_a (empno, deptno, sal) VALUES (903, 20, 300);
INSERT INTO emp_a (empno, deptno, sal) VALUES (903, 30, 200);) Would you count 200 or 300 as the second greatest?
Here's one way:
WITH got_r_num AS
SELECT empno, deptno, sal
, ROW_NUMBER () OVER ( PARTITION BY empno
ORDER BY sal DESC
) AS r_num
FROM emp_a
SELECT e.empno
, e.deptno
, e.sal
, '(' || TO_CHAR (r1.sal)
|| '/'
|| TO_CHAR (r2.sal)
|| ')' AS div_sal
FROM emp_a e
JOIN got_r_num r1 ON e.empno = r1.empno
JOIN got_r_num r2 ON e.empno = r2.empno
WHERE r1.r_num = 1
AND r2.r_num = 2
; -
SQL query to get the list of approvals
Hi,
Could someone let me know the SQL query to get the list of all the pending approvals for a user in OIM 11g R2.
ThanksThere are a few ways to do this:
- The easiest would be to use a Relationship Query from the CMC. To do this, go to the Universes section on the CMC, right click on the relevant universe, select tools >> Check Relationships.
- Use Query Builder. You will need more than one query to pull the information you need. You could try something like the below (for Webi)
SELECT SI_NAME, SI_WEBI, SI_DATACONNECTION FROM CI_APPOBJECTS
WHERE SI_KIND = 'universe' and SI_NAME = 'Universe Name'
This will give you a list of Webi Reports by SI_ID.
You'll need another query to list Webi report names:
SELECT SI_NAME FROM CI_INFOOBJECTS WHERE SI_ID IN (SI_ID from query above)
- This is trivial via Auditing / the Activity universe. This of course will only return reports that have already run.
Best.
Srinivas -
Sql query to find the balances for a customer account wise.
Hi,
Could someone help me with the sql query to find the balances for each customer account wise. This is need to generate the report.
presently we are using this query, but the output doesnot return the expected result.
SELECT sum(nvl(ps.acctd_amount_due_remaining,0)) "Balance"
FROM ra_cust_trx_line_gl_dist_all gld,
gl_code_combinations c,
ar_payment_schedules_all ps,
RA_CUSTOMER_TRX_ALL rat,
ra_customers rc
WHERE c.CHART_OF_ACCOUNTS_ID = 101
and gld.code_combination_id = c.code_combination_id
and rat.CUSTOMER_TRX_ID=gld.CUSTOMER_TRX_ID
and rat.CUSTOMER_TRX_ID=ps.CUSTOMER_TRX_ID
and ps.customer_id=rc.customer_id
and ps.status='OP'
and ps.gl_date <= :PDATE
and ps.org_id=:PORGID
and ps.class in ('GUAR','INV','DM','DEP')
and c.SEGMENT4=:Account_id
and ps.customer_id=:Customer_id
Thanks in advance.
Kalyan.Can someone help us with this.
-
SQL Query To Select The 5th Element
In the report I am currently working on, I am using an Add Command custom SQL query to pull the data that I need. The structure is a Call and a list of associated Activities. In this particular scenario, there are 8 activity notes for a type of call and I want to return the 5th one. The activity notes are a specific sequence of captured actions and I need the note from the 5th step in the sequence.
This is what I have come up with:
SELECT CALL.call_id,
(select top 1 from (select top 5 CONVERT(char(8000),ACTIVITY.activity_note) from ACTIVITY
where CALL.call_id = ACTIVITY.call_id
order by ACTIVITY.creat_date desc))
as activity_tx
FROM CALL
The intent of the Top 5 was to get the first 5 activity notes, of which the 5th note would be the last, then reverse sort them so I could take the Top 1 (which would be the 5th of 8). But I am getting a vague syntax error between "from" and "order by". Any suggestions would be appreciated.
Thanks!
Fuskie
Who thought he had a solution but is flummoxed he can't bring it home...Hello,
Let me explain that Crystal assumes the user knows how to write SQL. We only report on the data provided by the SQL you write.
I did a quick search using Microsofts new search engine - www.bing.com and it returned this as well as lots more:
http://forums.devshed.com/php-development-5/how-to-access-a-certain-element-in-the-results-of-606217.html
Try searching in MSSQL's site also for more info on how to get the results you are looking for.
Thank you
Don -
Sql query to indetify the identical data
Hi
I would like to know the query to identify the identical data in same table.
Example: I have table called 'AA" having same data for load_ctry i.e. 'MY' and 'HK' ,I need sql query to indetify the identical data for above countries in that table.
Thanks
MRHi,
Table called "AA" with columns col1,col2,col3,load_ctry with following sample date
col1 col2 col3 load_ctry
3 bg xx TH
4 op xc TH
3 bg xx MY
4 op xc MY
3 vb nb MY
When query ,if data is identical for both countries ,no data to fecth or data identical .If data is differ ,it will return the mismatching data becuase we are using same table for both countries .
Thanks
MR -
No values when the approver rejects the form ( HCM forms)
Hi All ,
When i am filling the form with the data from the BAdi and sending it to the approval for the final approval .
Problem : The approver rejects the form . The forms comes into the workspace of the Initiator * where are the values are getting washed off .*
Done : I am attaching all the fields to special fields .Even i have created a operation for this purpose .
Do i have to check the processing type . As of now its the initialize .
Please provide your input and let me know what all things i have to take care in this case .
Thanks ,
OmAll "reject" does is send a process code. Your workflow then determines how to handle it based on that code. As for your fields getting "washed out", are you sure you are handing them off correctly? For example, if you are going from one form scenario to another, you have to "map" that passing of fields. If within the same form scenario, I would say either (1) your workflow is set up wrong and you are losing integrity of your process object or (2) your not seeing what you think you are seeing. You can check this in CASE Mgmt and see what is happening all along your process. and as Kevin said...I would not go making all of your fields "special".....that is used for something quite different...I rarely, if ever, need or even try to make any fields "special".....it's just extra work that buys you nothing much usually overall. Hope this helps.
-
Is there any query to know the multiple users name from their ids?
is there any query to know the multiple users name from their ids?
Hi,
Goto TCode SUIM Select Users Select Users by Address Data
It will give you the users list
Regards,
Sankaran -
OIM sql Query for getting the status of the task which got failed
Hi Everyone,
We have a requirement like we need to get the status of a particular task(say Create User in OID resource - Completed\Rejected status) for the particular user.We are able to get the status of the resource provisioed to the user but not the status of the particular task getting trigerred for the user.can someone put some light on this.We need to get the SQL query for this.
Thanks in Advance.
Regards,
MKNHi
Use this sample query to get the task status, also check the cooments
SELECT USR.USR_LOGIN, OSI.SCH_KEY,SCH.SCH_STATUS,STA.STA_BUCKET FROM
OSI,SCH,STA,MIL,TOS,PKG,OIU,USR,OBJ,OST
WHERE OSI.MIL_KEY=MIL.MIL_KEY
AND SCH.SCH_KEY=OSI.SCH_KEY
AND STA.STA_STATUS=SCH.SCH_STATUS
AND TOS.PKG_KEY=PKG.PKG_KEY
AND MIL.TOS_KEY=TOS.TOS_KEY
AND OIU.USR_KEY=USR.USR_KEY
AND OIU.OST_KEY=OST.OST_KEY
AND OST.OBJ_KEY=OBJ.OBJ_KEY
AND OSI.ORC_KEY=OIU.ORC_KEY
AND OBJ.OBJ_NAME='AD User'
AND OST.OST_STATUS = 'Provisioning' -- filter accordinglly
AND STA.STA_BUCKET = 'Pending' -- filter accordinglly
AND PKG.PKG_NAME='AD User' -- filter accordinglly
AND MIL.MIL_NAME='System Validation' ---- filter accordinglly
Thanks,
Kuldeep
Maybe you are looking for
-
Only plays one chapter at a time
I put the Bible on my iPod classic and it will only play one chapter then it stops. I have to pick the next chapter from the menu. This happens if I label the files as music or audiobook. How do I make it so when it finishes one chapter it goes strai
-
Iphoto isnt showing my pictures?
In my events it just shows one picturelike this And when i clicked into one it does this
-
After completion of GR(MIGO) delivey document flow was not updated.
We have to move the stock from PlantA to PlantB . Purchase order and deliveries and PGI has been created and stock is picked out of PlantA . For that delivey goods reciept also completed, when i checked in Purchase order history system showing GR has
-
I am facing one issue ,i have tried to remove all the name space of the request xml before it going to MQ,and i am able to delete successfully,by using xquery function ,when i execute the proxy from sbconsole payload ,its working fine,but when i call
-
Adding Indicators & Controls from the diagram - why do they get placed off the current screen?
When I place a button, indicator, etc. from the diagram, it gets placed on the front panel nowhere near the existing stuff. What am I missing? Richard