GRE - fast tunneling enabled - what does this imply?

Hi - does anyone know the significance of the 'fast tunneling enabled' comment in the show interface tunnel'x' output below:
Tunnel120 is up, line protocol is up
Hardware is Tunnel
Description:
Interface is unnumbered. Using address of Loopback100 (x.x.90.101)
MTU 1514 bytes, BW 256 Kbit, DLY 500000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation TUNNEL, loopback not set
Keepalive set (5 sec), retries 3
Tunnel source x.x.91.133 (Loopback50), destination x.x.136.19
Tunnel protocol/transport GRE/IP, key disabled, sequencing disabled
Tunnel TTL 255
Checksumming of packets disabled, fast tunneling enabled
Last input never, output 00:00:03, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3630570 packets input, 174267377 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
3641995 packets output, 175165679 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped ou

Richard
I found a paragraph which seems to explain this in terms of support for fast switching and CEF for GRE encapsulated traffic:
Encapsulation and the removal of encapsulation at the tunnel endpoints are slow operations; in general, only processor switching is supported. However, fast switching of GRE tunnels was introduced in Cisco IOS Release 11.1 for the Cisco 2500 series and the Cisco 4000 series of routers, and CEF switching of GRE tunnels was introduced in Cisco IOS Release 12.1.
If you want to see the original source here is the link:
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1829/products_feature_guide09186a0080087091.html
HTH
Rick

Similar Messages

When trying to update my IPad apps I am getting the message "Your Apple ID has been disabled". Still have more than 50$ in my account, so what does this mean ? What can I do to get my ID enabled again ?

when I am trying to download IPad updates I get the message "Your Apple ID has been disabled". What does this mean? How do I get my ID enabled again? Still got more than 50$ in my account !

Reset your Apple ID password here > Apple - My Apple ID
More information here > Apple ID: "This Apple ID has been disabled for security reasons" appears

When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?

When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?

Hello Julia,
Start with this article.
http://support.apple.com/kb/ts1567
B-rock

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

JohnL23
Thanks for the update.
There are several Adobe Premiere Elements Forum threads about situation such as the one that you have encountered. Typically they are the results of some heavy activity in the narration track. Some have found success in maneuvers between the Expert and Quick workspaces in versions 11 and 12 or Timeline and Sceneline workspaces in versions earlier than 11. That is why I mentioned that type of factor in a prior post in your thread.
If that is not working, then we are forced into the new project where the problems in the current project are not presenting.
I will do a search for the threads that I am recalling about your type of issue. But, right now all roads seem to head to the new project. But I would ask "Can you salvage this project by creating your narration clips in Audacity or a new Premiere Elements project and import them into this project, putting the clips on one of the numbered audio tracks?"
If the problem should reappear in the new project, please let us know including the details of what was going on immediate before the problem surfaced.
Thanks.
ATR

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

What does this message mean: "power pc applications are no longer supported"?

What does this message mean: you can not start because power pc applications are no longer supported?

Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

HT4296 What does this mean "remains disabled by default in this update"? Does that mean I don't have Java any more because of this update?

What does this mean (referring to the Java update on the Mac OS X 10.5.8) "remains disabled by default in this update"? Does that mean I don't have Java any more because of this update?

You should still have JAVA. Open Safari, then in the top Menu Bar, click on Safari and pull down to Preferences.
Safari> Preferences> Security> and click check the buttons next to Enable JAVA and Enable Javascript.
You might have to restart Safari, I'm not sure about that.
Good luck.

My 16GB iPhone 4S has 4.40GB of "other" file. What does this include and how do I reduce it? Kindly help me.

My 16GB iPhone 4S has 4.40GB of "other" file. What does this include and how do I reduce it? Kindly help me.

Text messages, MMS messages, email, music catalog, operating system settings, safari cache, siri cache, Genius data (if enabled), game center data -- esentially everything on your phone that isn't explicitely listed in the bar chart at the bottom of iTunes on your computer.
Sometimes there is also data corruption on the phone that ends up in Other. To get rid if it try restoring the phone with iTunes. If that makes no difference the corruption is in your backup; restore again as a new phone, then add content back.

HT4993 there is an icon in my menu bar with a lock with a continuous circle around it - what does this mean

there is an icon with a lock with a continuous circle around it - what does this mean

It means you have enabled rotation lock, so the screen will not change from portrait to landscape when you rotate the phone.
Double-press the HOME button, then slide the QuickLaunch ribbon from left to right to reveal the lock control icon.

What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found: /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

What does this error message when I try to do updates mean? And how can I fix it? Thanks. The operation couldn't be completed. (NSURLErrorDomain error -1012.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

DiskWarrior: "not enough contiguous space"? -What does this mean??

Having issues, cannot reboot, after software update. Grey screen + Apple comes up, but no wheel and no further booting.
I'm able to boot from the DW CD.
Hard drive capacity is 74.41GB/ available space 21.81GB.
Graph of hard drive shows 5% out of order.
I rebuilt the directory which shows NO changes to the number or contents of files and folders... BUT...
"There is not enough contiguous free space for a fail-safe replacement of the directory. It is highly recommended that you create 132 MB of contiguous free space before replacing the original directory."
So what does this mean? Contiguous free space on the hard drive or in RAM?
(The hd doesn't seem to make sense, since it shows over 21GB of available space.)
I've ordered a new 1GB RAM module which should arrive Friday, but should I install this when the computer won't even boot on its own?
Help! I'm stuck and don't know what to do next. I have no idea how to go about creating 132 MB of contiguous free space.

DW is telling you it needs 132MB of contiguous — i.e., unfragmented — hard drive space. Apparently you don't have it, because all your free hard drive space is fragmented into segments smaller than 132MB. With nearly 21GB of free space in all, that's very surprising. It suggests that the files using space on your drive must be much more fragmented than is common in OS X, which defragments most files automatically without any input from you.
Ideally, what you would do to defragment everything on your drive, including the free space, is clone that drive to an external hard drive, and then clone the external drive back onto the internal drive. The second step in that process would erase the internal drive and then write everything back to it in unfragmented form.
But to do that, you'd have to be able to start the Powerbook up from a source disk that contained a cloning utility and enabled you to use it. The simplest way of doing that would be to have an external drive divided into two partitions: one small partition with an OS and a cloning utility (and perhaps other disk utilities) installed on it, so you could start up from it, and another larger partition of a suitable size for cloning the internal drive to: i.e., about the same size as the internal drive, or at a minimum, 10% larger than the amount of space that's actually used on the internal drive. If you don't already have such an arrangement, you're in no position to create one now except by going out and buying an external Firewire hard drive.

My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

My MacBook has a grey screen with a folder and a question mark in the middle what does this mean?

It means a valid system cannot be found. You need to reinstall OS X.
If you have Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you have Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

When I try to turn on Home Sharing, I get the message: "Home Sharing could not be turned on because of an error (5506)." What does this mean please?!

When I try to turn on Home Sharing, I get the message: "Home Sharing could not be turned on because of an error (5506)." What does this mean please?!

I had the same error it was due to a program called Little Snitch, it's somewhat like a firewall. I changed the settings in Little Snitch to allow network connections in iTunes and now I can enable Home Sharing. Maybe you should try changing some firewall settings.

GRE - fast tunneling enabled - what does this imply?

Similar Messages

Maybe you are looking for