Great tool, some feature requests...

Hi
Great tool Xavier - should take the more tedious stuff out of code reviews.
A couple of suggestions:
It would be good if you could specify a number of different source paths to run over in the ant task. We have several projects, some with several sourece paths. Instead of having an xml file produced for each one and having to load them one by one into the viewer it would be nice to be able to run the task once and generate 1 xml file.
For flex CPD could we specify the output file? I realise that you might be hardcoding the filename for the CPD tool so understand if this isn't goign to happen.
It would be useful if the viewer could load in multiple files at the same time
How do we make the ant build fail if PMD finds problems?
For Flex CPD it would be helpful if we could tell it to ignore certain lines - for example imort lines.
I tried to have a look and see if I could fix some of these issues but couldn't get any of the projects to build. The flex projects are looking for a libs directory that isn't in the source control and I couldn't be bothered finding and downlaoding them all

Thanks for the feedback
It would be good if you could specify a number of different source
paths to run over in the ant task. We have several projects, some with
several sourece paths. Instead of having an xml file produced for each
one and having to load them one by one into the viewer it would be nice
to be able to run the task once and generate 1 xml file.
For Ant, you could specify several filesets, couldn't you? I must admit that I don't use Ant a lot.
For flex CPD could we specify the output file? I realise that you might
be hardcoding the filename for the CPD tool so understand if this isn't
goign to happen.
We could, but can you explain your case? I don't see any obvious reasons to do that. That would be great if you shed a light.
It would be useful if the viewer could load in multiple files at the same time
There will be other ways to see violations.
How do we make the ant build fail if PMD finds problems?    
failOnError="true" in yiur build.xml
For Flex CPD it would be helpful if we could tell it to ignore certain lines - for example imort lines.    
In the next release, the imports and comments are ignored.
I don't see any simple ways to specify which lines to ignore.
I tried to have a look and see if I could fix some of these issues but
couldn't get any of the projects to build. The flex projects are
looking for a libs directory that isn't in the source control and I
couldn't be bothered finding and downlaoding them all
Some of the librairies are not opensource, but there is on the wiki a HOW-TO build the project yourself.
I hope this helps
Thanks
Xavier

Similar Messages

  • Some Feature requests

    Some I am sure are dups, to which I apologize...
    - Nested Presets.
    - Subdirectories for exports (under C1 I export into a YYYY-MM-DD).
    - Way to save your own white balance as an entry on the white
    balance "WB" list. I know you can do a preset, but it would
    be more intuitive to have it show under the "WB" list. Plus
    without "nested Presets" of course, the fewer "Presets" the
    better. C1 can do this for instance.
    - Speed this pig up on Windows. I upped my memory to 2 gig and
    it *still* is dang slow. It's not dual core, but it ain't that
    slow of a PC either.
    - Add some sanity (or Help files) or something to explain why,
    how, where, or what "previews" are generated. You can manually
    generate them, but there is just about zero explanation as
    to why or how unless you search these forums.
    - Have a way to stop it asking you if you want to find off-line
    content. I use a laptop so I have to leave a lot of it off-line
    (via external USB hard drives).
    - Make it find compressed drives and folders again. Very weird
    default to not see them (bug!?).
    - Add more preferences. I agree with the extremely simple interface
    design, but you should be able to highly customize it behind the
    scenes.
    - For instance - give an option to make "Auto Tone" *not* use
    "Brightness" and "Contrast". This forum and the book says
    they are there for "legacy" reasons - yet "Auto Tone" sets them.
    Wouldn't it make more sense to have it set a "Tone Curve" for
    the same thing?
    - On "Auto Tone", maybe I'm confused, but from what I've read
    it sounds like "Brightness" compresses and thus is less than
    ideal. It would be nice to be able to control that (turn off
    setting it at all) for "Auto Tone".
    - Similarly, have a setting to mediate "Auto Tone" use of "Blacks".
    It's great for art shots et al, but it can be murder on people
    shots.
    - Allow override of all defaults for Tone, Detail, etc. Maybe
    Adobe thinks the default "Sharpening" of 25 is the only thing
    you'd want (for example), but you might want you own base default
    on that (or contrast, or "medium" tone curve, or whatever).
    Sure you can create a import "Preset" to override, but it doesn't
    sound to hard to just make it a preference.

    1. I think all audio professionals will agree that a waveform view for our audio files will be greatly appreciated (of course the playhead will run on the waveform and not on a separate bar).*
    Are you suggesting that this should be in the Finder? Isn't that the job of the sound editing packages?
    2. Also getting back the "every finder window can have its own settings" will also be appreciated by many.
    It's there. Open a finder window, set it as you like (use -j for more options). If you want that look for every window, press 'Use as Defaults'. If not, then the default will be used for any window you don't customise.
    Regards
    TD

  • Feature requests

    I'd like to submit some feature requests and complaints I've had with both the desktop and mobile apps.
    1. Larger "add to queue" buttons for mobile- I always end up accidentally playing the track when I try to add it to the queue. This is extremely annoying because it stops the current song, and there is no way to easily go back to it.
    2. Ability to jump to alphabetized artist in "your music" by typing the letters of their name like on iTunes, or some filter/search method. I have lots of artists and songs in that section, and it's incredibly annoying to have to spend so much time scrolling just to get to "z"
    3. Always go back to specific location in scroll when hit "back" button.
    4. Easy ability to remove item from playlist from "current song" screen as it's playing on mobile (and just in general, I couldn't figure out how to remove a song from playlist on mobile)
    5. Ability to make each artist in your music as a small, narrow list element for ease of jumping around (both desktop and mobile)
    6. Side alphabetical thing that you can tap to jump to a letter as in iPod music
    7. Easy explicit versions of tracks. Sometimes a track will even say it's explicit but will be edited to have cuss words removed. This is ridiculous

    Updated: 2015-07-27Hello there!
    Thanks for the feedback, as mentioned, unfortunately we can only handle 1 feature request per topic, otherwise it's impossible to manage the received kudos / give the idea a proper status.
    If you want to start a general feedback topic, that's great! But please use the respective help forum then. ;)
    When you're re-posting those ideas in separate topics, please make sure to use the search function, since a lot of ideas might already be out there in the ideas forum. Thanks again!

  • Delivering on your top feature requests!

    Dear Adobe EchoSign community --
    As Fall starts to settle in, [at least in the Northern Hemisphere], I wanted to share progress we've made on your feature requests.  As context, our team sits down weekly to review your top feature requests that come from our community sites, our support, and our 1:1 conversations. Year to date, we've already delivered more than 80 of your top feature requests: Enterprise administration, API flexibility, improvements to our fields and more. 
    A partial list of the most-requested features delivered include:
    Refreshed and new clients for Android and iOS
    New sign-only role : control who has signing privileges, and who can send agreements
    Batch user creation: enable/disable accounts
    Ability to update & edit your published widgets
    Advanced data retention policies and configuration
    Field alignment & form field sizing during form authoring
    Text Tags for creating hyperlinks in documents
    Specify text color, font and font size for form fields through text tags
    Repeat fields at the same location with the document via text tags and form authoring
    EchoSign signature stamps on documents through text tags and form authoring
    EchoSign Transaction ID on documents linked to the EchoSign Audit Trail through Text Tags and form authoring
    Field labels for radio-buttons, check-boxes and links from text tags
    Enable/Disable form fields through conditions during e-sign
    Enhance reporting to export read-only metadata included with the agreements
    And a huge amount of work with the REST API Set:
    Sending documents with phone authentication
    Creating widgets with multiple counter-signers
    Replace signers through the API
    Allow signature delegation through the API
    and more.
    Over the remainder of the Fall, our key focus areas include the new Salesforce1 release, expanding our enterprise administration capabilities, building out the REST API, and the constant work on the SaaS infrastructure to increase performance, availability, and security.  We have more to here.... we know!  So keep the feedback and ideas coming.   And thank you for your engagement and use of Adobe EchoSign.  Hope to see you at Dreamforce '14.
    -- Jon "JP" Perera

    Evita,
    Yes, you can still vote on Accepted. (You can even vote for "Scheduled for release...", because sometimes we need to move features from one release to the next)
    Accepted means that it sounds feasible to do and we can do it, but "when" has not been established. Please add votes to help that decision.
    Rejected Just that, we have no plans to do this. I don't revisit rejected on the Exchange.
    (However, some features that have been rejected have been discussed on the forum and we've reconsidered. We have also changed "rejected" to "accepted" on previous occasions, but only based on discussions here. Some features rejected have very poor explanations as to the problem users are trying to solve)
    Open We haven't read them or made any decision on them.
    Awaiting Community Votes means just that. Someone has proposed a feature and no-one else seems to be interested.With the long list of features, we do need to prioritize and some features requested are obscure, so we want more feedback from the community. More votes and feedback from the community helps. We sometimes get 10 points from some folk and zero from others for the same feature.
    Please note that except for the Open features, the others we have touched and added feedback.
    Problems I have with the feature requests is lack of clarity in the request and more than one request described in a single request. The extra features get lost and others can't vote on them.
    Sue

  • Voting on SQL Developer Feature Requests

    I've been reviewing the features requests and of the different statuses, should one still vote on those marked as Accepted? I'm assuming yes to give them more weight to get them looked at sooner? Are those marked Rejected NEVER looked at again? What's the difference between those marked Open and those marked Awaiting Community Votes? Aren't those 2 statuses the same thing?
    Thanks for your help.

    Evita,
    Yes, you can still vote on Accepted. (You can even vote for "Scheduled for release...", because sometimes we need to move features from one release to the next)
    Accepted means that it sounds feasible to do and we can do it, but "when" has not been established. Please add votes to help that decision.
    Rejected Just that, we have no plans to do this. I don't revisit rejected on the Exchange.
    (However, some features that have been rejected have been discussed on the forum and we've reconsidered. We have also changed "rejected" to "accepted" on previous occasions, but only based on discussions here. Some features rejected have very poor explanations as to the problem users are trying to solve)
    Open We haven't read them or made any decision on them.
    Awaiting Community Votes means just that. Someone has proposed a feature and no-one else seems to be interested.With the long list of features, we do need to prioritize and some features requested are obscure, so we want more feedback from the community. More votes and feedback from the community helps. We sometimes get 10 points from some folk and zero from others for the same feature.
    Please note that except for the Open features, the others we have touched and added feedback.
    Problems I have with the feature requests is lack of clarity in the request and more than one request described in a single request. The extra features get lost and others can't vote on them.
    Sue

  • E72 Music Player features request / suggestions

    Hello,
    I know that E72 is a business phone and that there are music control buttons on certain hands free, but...
    I have some features requests for E72 music player application:
    1. Please make call button on hands free to act as next song button, the same as call button on hands free acts as next radio channel on classic radio. Other players have this feature (such as PowerMP3), but since I have paid a lot of money on E72, I would like to see this feature build in its own music player.
    2.Please make music player to allow in an intuitive way to add music folders. By default it adds everything, including ringtones, mms-es and so on. Maybe an option/question of starting from a blank play list on first use would be nice.
    3. When deleting a song from a play list, please only remove it from the list by default, not physically, or ask the user, or use a sub-menu with the option with default option "only from play list".
    4. Make space bar default key to select/unselect songs for certain actions. Using the D-pad in certain contexts it's really confusing.
    Just and advice: design the application as the user expects to. Users have experience with other players on phones or PC, so...take example.
    Thank you!

    N80 also has album art.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Feature Request: Some DB Admin stuff.

    If there's one thing I could really use it's the ability to clone a user, create a tablespace, grant a role ... in other words some of the stuff that Enterprise Manager does but without the gigabyte download. I'm sure there must be other developers out there who need to set up users for testing and fiddle with sandbox databases but who don't do it often enough to be fluent in the commands.
    Anyone?

    That said - you'll be able to grant roles to users you create in 1.1. However, you will not be able to clone users, so please add that and other feature requests to the Exchange.
    Thanks
    Sue

  • Feature Request: Consistently Intelligent Font Lists across all CS Program

    Current Problems/Inconsistencies in Font Lists + Suggested Solutions:
    NUMBER OF FONTS SIMULTANEOUSLY DISPLAYED:
    Premiere Pro (PP): 16 (too few!)
    AE: 19 (too few!)
    Photoshop: 40 (adequate)
    Illustrator: auto-maximizing (displays as many fonts as screen supports, 50 on a 1920x1080 monitor)
    *SOLUTION: Make all font lists auto-maximizing like Illustrator!
    FONT PREVIEWS:
    PP: Yes (6 user-defined characters previewed next to font names)
    AE: No previews
    Photoshop: Yes ('Sample' displayed in each font, but too small for comfortable viewing)
    Illustrator: Yes (Each font name is displayed in actual font, but this makes it inconvenient to know the name of 'Dingbat' fonts.)
    *SOLUTION: Make all font lists display font names in left column, with 'Sample' displayed in the actual fonts to the right.  When users select any text, replace 'Sample' with the first 1-30 selected characters for instant previewing in all available fonts (e.g. selecting the '&' character would display '&' in all available fonts for instant comparison). Also make font lists resizable with a horizontal zoom bar at top of list to ensure comfortable viewing for everyone.
    SCROLL BAR:
    PP & AE: Yes
    Photoshop: Yes (perfect size and color scheme for best visibility)
    Illustrator: No (current scrolling method is frustratingly slow!)
    *SOLUTION: Add a Photoshop style scroll bar to each font list for best visibility/usability.
    FONT SELECTING WITH ARROW KEYS:
    PP & AE: Yes, by arrow-keying up/down in both the font fields and font lists
    Photoshop & Illustrator: Only from the font fields. Highlighting fonts with the arrow keys in the font lists doesn't result in font visualizing.
    *SOLUTION: Allow PREVIEWING of fonts by arrow-keying up/down in font fields and font lists in all CS programs.  I emphasize 'previewing' instead of 'selecting', since previewing fonts avoids the problem of unnecessary undos being created for each font visualized with the arrow keys. (Note: Arrow-scrolling through the font field in Photoshop's Options bar works as I suggest, by 'previewing' each font without creating unnecessary undos.  Unfortunately, arrow-scrolling through the font field in Photoshop's Character panel does create useless "Set Character Style" History states for every visualized font.  This kind of inconsistency even within a single program is crazy!)
    CONCLUSION:
    CS programs are all part of the same family, and should therefore behave as such with consistently intelligent tools.  This includes font lists with a consistently intelligent design.
    Please comment and share!  Let's get these glaring font list inconsistencies finally fixed!

    If you want to do this correctly you need to file a request for each feature.
    Ripple Sequence and Chapter Markers is already implemented. Sequence markers are the same as chapter markers, yes? (Ripple Sequence Markers, select Marker > Ripple Sequence Markers.)
    Ability to print the Keyboard Shortcuts, or save all of them as a text file. also available. (hold ctrl+shift while opening. A button with clipboard appears)
    Keyboard shortcuts to scale image zoom in Source and Program tabs. available
    Keyboard shortcuts to increase or decrease playback resolution. available
    Make Export and Title windows return to the previously adjusted size and placement. They do.
    Some feature you posted are great. How about a eyedropper tool for the Color Matte?
    I find the Magnet for Snap quite visible. There is also this feature in the Pref to make the playhead snap.

  • Feature Request: Please fix text editing

    Hi there great Adobe Team!
    I am usign your product for rapid web prototyping.  Often times ontop of my interface drawing, I use the text tool to write some text, and then put a nice colored background box behind it.
    The problem I am facing is this:
    It seams you have mapped the control-left and control-right keys to change the spacing of the letters.  Unfortunately, this is a common mapping used in windows to jump to the next word!
    Your current key mapping assignment makes text editing quite troublesome!!!
    Can you please change these key maps in your next update?
    Thanks very much
    Sincerely yours,
    a developer that uses Fireworks and Adobe Cloud everyday!

    TokyoFire,
    Hi! This is a user-to-user forum. I recommend that you submit your feature request directly to Adobe using their official Feature Request and Bug Report Submission form:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    For future reference, it is possible to change many of the keyboard shortcuts in Fireworks using the Keyboard Shortcuts dialog (under Fireworks > Keyboard Shortcuts). Here, you can choose from several different sets or create your own customized set. Within each set, there are three categories: Menu Commands, Tools, and Miscellaneous.
    Unfortunately, none of these categories seems to include the shortcut to which you're referring (for text kerning). To expand upon your suggestion, I'd recommend that Adobe consider adding this missing shortcut to the Miscellaneous category, or create a new category called Text, where users can access and modify this and any other missing, text-oriented keyboard shortcuts.

  • Feature Requests for next version of Pr

    I've submitted this list.  If you agree, please join me.  Copy and paste into the Feature Request page if you like.  Add your own requests.
    AUDIO:
    Ability to save track or clip based audio effect user presets.
    Option-drag to copy an audio effect from one insert location to another (to different tracks)
    Drag audio effects up or down in the effect stack order, or to another track
    Temporary Snap on or off (Reverse Snap Behavior) keyboard modifier.
    KEYBOARD / SHORTCUTS:
    Ability to map multiple Keyboard Shortcuts to the same function (like Avid: E & R keys, same as I and O)
    Ability to print the Keyboard Shortcuts, or save all of them as a text file.
    TIMELINE:
    More obvious indicator that Timeline Snap is on.
    Indicator on Clips in the Timeline that indicate Frame Blend is enabled.
    Ripple Sequence and Chapter Markers.
    Ripple Audio Track Keyframes.
    Solo video layer button on the Timeline track panel.
    Constrain clip time movement between tracks by holding shift key, just like all other applications.
    FX button/switch, as in After Effects, to turn off all effects on a track (video and audio).
    Option-double click a nest to reveal contents of nest in the same master timeline.
    SOURCE AND PROGRAM PANES:
    Keyboard shortcuts to scale image zoom in Source and Program tabs.
    Keyboard shortcuts to increase or decrease playback resolution.
    Have the Program monitor remember the Zoom and Resolution level for each Sequence; don't have Zoom scale set universally by the project.
    VIDEO EFFECTS:
    Make ALL effects Accelerated, YUV, 32-bit.  Allow Third Party effects to be accelerated!
    Ability to save user/custom transition presets.
    In Effects tab, press Tab button to jump to next effect parameter (as in After Effects)
    Feathering and invert on Garbage Mattes
    A Track Matte function that allows us to pan and scale the clip being matted without affecting the matte size or position.  You could do this with a Stencil / Silhouette Alpha / Luma Blend mode as in Ae.
    MISC:
    When using Clip > Scale to Sequence, DO NOT have the new Scale factor in the Motion tab change the clip's scale to 100%.
    Consistent Mouse Wheel behavior across all apps in CS
    Scopes update while playing.
    Make Export and Title windows return to the previously adjusted size and placement.
    Add a command buffer, so that we can execute several commands in a row, and not wait for the app to "release", or for the first event to complete before I can proceed to the next event.
    File requests here:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

    If you want to do this correctly you need to file a request for each feature.
    Ripple Sequence and Chapter Markers is already implemented. Sequence markers are the same as chapter markers, yes? (Ripple Sequence Markers, select Marker > Ripple Sequence Markers.)
    Ability to print the Keyboard Shortcuts, or save all of them as a text file. also available. (hold ctrl+shift while opening. A button with clipboard appears)
    Keyboard shortcuts to scale image zoom in Source and Program tabs. available
    Keyboard shortcuts to increase or decrease playback resolution. available
    Make Export and Title windows return to the previously adjusted size and placement. They do.
    Some feature you posted are great. How about a eyedropper tool for the Color Matte?
    I find the Magnet for Snap quite visible. There is also this feature in the Pref to make the playhead snap.

  • Feature Request: RGB Histograms / Tone Curves

    Hi team,
    It would be really helpful to be able to view the RGB Histograms separately in addition to a composite (rather than the "compact" mode we have now).
    It would also be really helpful to be able to adjust the Tone Curve applied to an individual RGB channel in Develop.
    Finally, it would be most helpful to be able to see the RGB values as well as or instead of the RGB percentages when moving the cursor over an image area.  This would be particularly helpful for fine-tuning skin tones.
    Thanks, and keep up the great work.
    We're delighted you're evolving Lightroom!
    Cheers,
    Matthew

    Your post seems to assume that Lightroom is a tool for travel/landscape photography, and other types of photography (e.g., portrait/fashion) should be supported by a "specialized add-on module". I have to disagree with you on that point. Considering many of the examples on the Lightroom marketing are fashion shoots, I would think that they considers portrait/fashion photographers to be an important part of their target audience. They are not a fringe group of specialists.
    I'm sure that portrait/fashion photographers would feel the same way about a Lightroom capability that primarily benefits the workflow of a travel/landscape photographer, i.e., when I do do some landscape work, I just edit in Photoshop. But you wouldn't agree to that, would you?
    Skin tone measurement can be an incredibly easy tool to implement. It can be something as simple as showing the CMY values alongside the RGB values during a mouseover. Keep in mind, I'm talking about CMY not CMYK, so there should be no need to worry about what ICC profile to use. RGB to CMY is a straightforward transformation. It's embarassingly simple.
    There are other ways Adobe can implement skin tone management that would be more powerful but a little more complicated. Those would be great too.
    Anyway, thanks for the link to the Adobe feature request page! I will use it.
    Regards,
    Mike

  • Portfolio features request:

    some small features would greatly enhance the value of Portfolios:
    1) filename aliases so that we could create the names to display  instead having to display actual  filenames.
    2) Portfolios of Portfolios - incredibly useful if we could stack levels of portfolios. I discovered that it's 'almost' possible. We can create and access a portfolio inside of a portfolio. We just can't navagate back to the higher level portfolio once we've drilled down to a lower level one.  Maybe it needs an extra tool bar button that would action us to the highest folio level? I also noticed that calling a portfolio from within a higher level portfolio displays a "portfolio empty" message, even though it clearly is not empty. That would need to be fixed as well.
    3) Question?  Are the file icons displayed within  portfolio presentations 'removable'  and/or can other images be substituted for them?  (I'm a new user)
    If not, that would be a great feature, too. The general idea behind these ( 1 and 3) feature requests is, from the clients point of view,  our presentations will be far more professional if we have the option of supressing any extraneous  (acrobat generated) display and can display only what we want seen.  For presentations to technical people it might be desirable to display filenames and such, but for others, such things only distract and  lower the production values of our work.

    I completely agree with you. Also mine company, which bought and used "Presenter 7", and would like to upgrade to "Presenter 8" or "9 Presenter," But in the absence of this feature video capture for the sidebar is not acquistera "Presenter 9 "if you do not back the functionality and probably will try alternative software that do this.
    So me too request to Adobe to reinsert this functionality in "Presenter 9" or alternatives of equal simplicity (eg the inclusion of a button "Capture Video" as in "Presenter 7" next to the "Recorder".

  • Posting Feature Requests for others to Copy/Paste

    I recently posted a Feature Request I sent to Adobe for another member to copy/paste as his own FR since he liked the suggestion (see the FR below). 
    After doing so, I got the idea that we could all do this: copy/paste FRs we send to Adobe into threads on this forum to help each other support the idea with similar requests, or even copy/paste the FR as our own.  With limited resources and time, there's only so many requests Adobe can implement in every new version.   That why it's so important that new features the Premiere Pro team invests their hard work and time on be the tools that would benefit the greatest number of editors.  The more people back up certain ideas, the more likely they'll be implemented sooner than later.
    There's power in numbers, so how about using this forum to share our best ideas and make it easier for others to add their voice of support?  It's great that Adobe provides us with a way to send them feedback, but it's too bad that it's a one-way conversation with very little, if any, dialogue back and forth between the submitter and Adobe.  That's why I thought it would be great to bring more of that potential dialogue here, where we can share ideas and support the creation of an ever better Premiere Pro!
    If you've never posted a FR or BR (Bug Report) before, you can easily join the effort to make Premiere Pro become all that it can be, here: www.adobe.com/go/wish
    Comments?  Ideas?  Please share!
    Here's the FR I pasted in another thread, as an example. 
    *******Enhancement / FMR*********
    Brief title for your desired feature:  Drag&Drop Modified clips into Project Window
    How would you like the feature to work?
    Ability to Drag&Drop clips with effects, motion settings, keyframes and/or markers back into the Project Window from the Timeline for later use.
    Why is this feature important to you?
    The Project Window is far better than Sequences for storing/organizing modified clips for future use, since it is:
    Searchable
    Sortable
    Viewable in Icon and List views
    Full of helpful metadata columns such as 'Video/Audio Usage'
    Foolproof in that the original sequence can be deleted without losing any created subclips
    Given these advantages, why only allow us to store modified clips in Sequences? Please fix this by allowing users to Drag&Drop clips from the Timeline to the Project Window while preserving all of their modifications (effects, keyframes, motion settings and/or markers).

    Comments?  Ideas?  Please share!
    As it has already been discussed in this thread (and duplicated threads are not allowed in Adobe Forums), the aforementioned feature request is mainly based on the false statement that an editor can either store raw clips in the Project panel or modified clip in the timeline. That's false because an editor can nest modified clip right in the timeline and the nested sequence will be automatically stored in the Project panel, turning into a regular reusable asset.
    Unfortunately, the OP, as was also outlined in the duplicated thread, carefully avoids any mentioning this ability, which becomes your second nature if you use After Effects (which is unlike FCP is a part of Adobe Suite).
    However, since the OP asks for sharing ideas, I do not hesitate to do this once again. Here is the feature request intended to improve the usability of such PrPro assets as 'Sequences' without breaking existing workflow:
    *******Managing Sequences*******
    It would be nice if managing capabilities for such assets as 'Sequences' were extended with the following features:
    - similar live thumbnail view, which was introduced for footages in CS6. A small 'Sequence' badge in the top left corner of the thumbnail would allow to differentiate between sequences and clips;
    - enabled metadata and ability to handle them like for any other regular asset;
    - ability to remove empty audio or video tracks completely, i.e. get a sequence as an Audio or Video asset only;
    - pop-up dialog box on hitting 'Nest' command, which would allow to give meaning name instead of default 'Nested Sequence XXX', contain 'Delete All Empty Tracks' checkbox and a button for advanced dialog for logging metadata right on a brand new asset creation.
    These features would improve an ability to exploit sequences as reusable assets and preserve consistent applications behaviour throughout the Suite instead of breaking existing workflow by inventing new FCP style 'subclip with effects' type of asset. See this discussion in PrPro Forum for some more details:
    http://forums.adobe.com/thread/1204107?tstart=0

  • Source code / feature request

    Hi
    This tool is fantastic and saves me a huge amount of time, helping us find some interesting bugs (like why "delete myarr.pop()" was having such an odd side-effect when the array contained strings..).
    I'm trying to get hold of the source code for this but my SVN clients can't connect, I've tried lots of different network configurations (from work, home and mobile connections) and both the SVN and HTTP connections, so I think the issue is on the Adobe/SoureForge end. Can anyone check/fix this?
    The reason for wanting the source is to add a minor change to the Tag Viewer / Tag Information output. Currently I'm trying to work out what function is defined at offset 0x348B2 of my SWF file. I can see it in the hex editor but it's tricky to work out what this function name is: the class is defined in DoInitActions offset 200492 and length 24355 i.e. a big class.
    What I'm hoping for is to add the offsets into each line in the DoInitActions 'Tag Information' panel, so e.g. instead of:
            if L63
            push $1
            push 'isMouseDown'
            getMember
            pushDuplicate
    I'd see:
    1522:        if L63
    1527:        push $1
    1527:        push 'isMouseDown'
    1534:        getMember
    1535:        pushDuplicate
    etc where the number at the start is the offset of this instruction within the DoInitActions tag.
    If anyone with the source can do this and update the binaries then great but I suspect it's something I would have to do myself... but currently I can't get at the source without having to individually browse to and download every file :-(
    thanks
       Andrew

    A new version of SWF Investigator was released on Friday (version 0.6.2) and I will be updating the open-source repository in the next day or two.  When the update is complete, I will respond to this thread so that you know to pull down the latest version of the source code.
    For SVN access, I have used TortoiseSVN on Windows which is supported by SourceForge: http://sourceforge.net/apps/trac/sourceforge/wiki/TortoiseSVN%20instructions
    The logic for your feature request already exists in SWF Investigator but it is currently commented out. For the next release, I can work on enabling it. If you want to play with the functionality in the meantime, then the code is in SWFInvestigator/src/decompiler/tools/Disassembler.as.Within that file there is a function called, "start." Within that function, there is an if-block which checks for "showOffset". You will need to uncomment the out.print() statement within the showOffset if-block. You will also want to set showOffset to true just before the if statement. Recompile the application and it will begin to show the information you want.

  • BUGS and FEATURES REQUESTED. Please add to it.

    I've been using the z10 for the past couple weeks and wanted to start a thread of comprehensive Bugs and Features Requested.
    I've labeled Bugs by letters (A,B,C...) and Features Requested by numbers (1, 2, 3...) so that others can add sequentially.
    BUGS
    (Not listed in any particular order)
    (A.) Contact App adds current date as birthday. When I edit my contact, the current date gets listed as the birthday in local contact.
    (B.) Duplicate telephone numbers listed. Telephone numbers show up twice in my Contacts (e.g.., if I have the contact's cell saved in (000) 123-4567 format and the person has the number listed in Facebook, I get a duplicate entry of +10001234567).
    (C.) Telephone numbers and emails are not actionable in Web pages. In webpages, I can't click on telephone number to call (e.g., I look up a phone number for a restaurant). I should be able to easily call or copy into the Phone App or E-mail App.
    (D.) Auto capitulation for words on the word substitution list is wrong. For example, when the word substitution contains more than one word. I have "ru" change to "are you" but if the first letter is capitalized (R) then both words become capitalized words (Are You). I used to have shortcuts like "mysig" to create email signatures with legal disclaimers but I can't do that now.
    (E.) Backspace delete doesn't work consistently. The Shift+Delete function seems only to work after moving the cursor. This feature is the Alt+Del action to delete words after the cursor.
    (F.) All Emoticons do not list. Emoticons do not all fit on the the two screens (lists) of emoticons. I.e., two columns are missing from view and can be seen when sliding (swiping) between the lists. Also, sometimes when I select an emoticon, it doesn't correspond with the picture of the one I intended. I believe this error is related. As a separate note, there should be a way to see the underlying symbols of the emoticon. (Often times, other people don't have BlackBerrys so I'd like to know what symbols would be sent--my prior 9800 would show the characters as i scrolled through them).
    (G.) BlackBerry keyboard doesn't always work in input fields. E.g., certain Web pages. (I found a work around; two finger swipe up from the bottom makes the keyboard appear)
    (H.) Sent messages stay unread. This seems to be an issue when an app sends an email (e.g., share article). The email with the sent indicator (checkmark) stays bold and I have listed 1 unread email. I can't mark as read/unread but if I delete the sent email, my unread message gets cleared.
    (I.) Contact already added but I get the option to add instead of view contact. For some contacts, I get the option to add to contacts in the action menu cascade when that person is already in my address book. This bug is for emails and text messages.
    (J.) Cannot call from text message. When I hold a text message and select call under the action menu cascade, the OS opens up the phone app but doesn't call.
    (K.) Composing messages by name. When composting messages, the input must be by first, middle and last name. It should be, instead, by string and include nickname. E.g., if the person's name is "Andrew B. Cameron" I must type the name in as such. I can't type in "Andrew Cameron" or "Andy Cameron."
    Features Requested and Suggestions for Improved User Experience
    (In no particular order)
    1)      Option to reply in different ways from the Call List. Be able to select a name in a call list and have options to call, text or email the person. The action menu allows calls to other numbers but I can't choose to text or email the contact instead. Sometimes, I missed a call and want to reply via text because I’m not able to talk. (Long hold on the Torch 9800 trackpad button brought up the action menu allowing me to call, text, view history, add to speed dial, e-mail, delete, etc.)
    2)      Option to reply in different ways from the Hub. Related to above, when selecting an item in the hub, have the option to contact the sender or caller with multiple different ways.
    3)      Only show number once in contacts application. Tap on the number to bring up the "action" cascade menu with options to call or text the number. Why is the same number listed twice (once to call and below again to text it)?
    4)      Timestamps for individual text messages. I can't tell exact time on individual text message if it comes in near the time of another text. All messages are in one "bubble."
    5)      Ability to select MMS or text for a message. Sometimes I write a text longer than 160 characters and I prefer it to be sent in one message (i.e., MMS mode) rather than being broken into one or more standard text messages. I had this ability with my 9800.
    6)      Send button should be moved for text messages!!! Why the heck is it right underneath the delete button?!? Or next to the period button? I often times have accidentally hit send when composing text. It's very annoying and embarrassing. (Also, what happened to the ability to hit enter for a return carriage to next line?)
    7)      Bigger magnifying glass. My finger is often over the area I need to place the cursor. I find it difficult and erratic to place the cursor.
    8)      Select all option. Add the option to select all text in action menu cascade.
    9)      E-mail recipients and message headers. Difficult to tell if you are one of many email recipients. Can we have a way to pull the email down to see the list of recipients rather than have to click to expand the header info? I know this request is a little picky, but that's how it was done in the previous BlackBerry OS which I preferred; it is easier and faster to pull the e-mail down and 'peek' to see which e-mail box received the message, message status, from and to fields. This change would be consistent with BB's flow/peek rather than click.
    10)   Browser navigation. Hold down back arrow to get a list of recently visited websites similar to a desktop browser.
    11)   Dark/Night mode. A night mode (maybe in the drop down menu) to change all the white and bright backgrounds to black or dark which would be helpful when reading/viewing things at night in bed/etc.
    12)   Number of contacts. Ability to see how many contacts I have.
    13)   What happened to groups or categories? I'd like to have back the ability to filter or see categories and also a way to contact everyone in a category. E.g., family or friends or coworkers, etc.
    14)   Shutter sound mute. I was at a wedding and wanted to take pictures during the ceremony but the shutter would was too loud.
    15)   East Asian Language Input. I bought my parents two Samsung Galaxy S3 phones over the weekend because they need Korean input (and the Kakao talk app). (BTW, S3 is a great phone but I prefer the Z10 after having the weekend to use the Android phones).
    16)   Ability to freely place icons on the homesreen. Currently, icons are forced top left-right-to-bottom. I prefer to space my icons out.
    17)   Add a contact to the homescreen. I'd like to place a shortcut (similar to a Webpage) to the homescreen for a contact which will open up the contact. Android allows this feature and so did my previous 9800.
    18)   Search Contacts by nickname. The contacts app doesn't allow me to search by, e.g., Andy, even if I have that as my contact's nickname. The previous OS allowed this type of search which was very helpful.
    Finally, as a note, I've been using the BlackBerry Z10 for the past 2 weeks and it's a great platform. I just bought two Samsung Galaxy S3 phones over the weekend for my parents so they could use the Korean language input and related features so I spent a lot of time with the Android platform, setting it up and teaching them how to use it. The S3 is a great phone too.
    I prefer, however, the way BlackBerry has done their OS 10 and the integrated management of messages.
    It's too bad that BB doesn't have Korean input and apps like Kakao Talk or I would have considered it for them.
    The BlackBerry 10 is a great platform and I look forward to the continual improvements that will only make the experience better.

    This is a great post.
    I couldn't have written it myself better.
    I'm also in dying need of Korean input as I can't communicate with my Korean friends.
    But I second every point.
    I hope the tech teams are reading this.

Maybe you are looking for